Staging: mt29f_spinand: Use preferred kernel types

Replace remaining instances of 'uint8_t' with 'u8' for consistency since
'u8' and 'u16' are already being used in other parts of the code.

Replace also 'uint32_t' with 'u32' on the header file.
Checkpatch pointed out this issue.

CHECK: Prefer kernel type 'u8' over 'uint8_t'
CHECK: Prefer kernel type 'u32' over 'uint32_t'
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/mt29f_spinand/mt29f_spinand.c

@@ -145,7 +145,7 @@ static int spinand_read_id(struct spi_device *spi_nand, u8 *id)
  *    Once the status turns to be ready, the other status bits also are
  *    valid status bits.
  */
-static int spinand_read_status(struct spi_device *spi_nand, uint8_t *status)
+static int spinand_read_status(struct spi_device *spi_nand, u8 *status)
 {
 	struct spinand_cmd cmd = {0};
 	int ret;
@@ -478,7 +478,7 @@ static int spinand_program_page(struct spi_device *spi_nand,
 {
 	int retval;
 	u8 status = 0;
-	uint8_t *wbuf;
+	u8 *wbuf;
 #ifdef CONFIG_MTD_SPINAND_ONDIEECC
 	unsigned int i, j;
 
@@ -613,9 +613,9 @@ static int spinand_erase_block(struct spi_device *spi_nand, u16 block_id)
 
 #ifdef CONFIG_MTD_SPINAND_ONDIEECC
 static int spinand_write_page_hwecc(struct mtd_info *mtd,
-		struct nand_chip *chip, const uint8_t *buf, int oob_required)
+		struct nand_chip *chip, const u8 *buf, int oob_required)
 {
-	const uint8_t *p = buf;
+	const u8 *p = buf;
 	int eccsize = chip->ecc.size;
 	int eccsteps = chip->ecc.steps;
 
@@ -625,11 +625,11 @@ static int spinand_write_page_hwecc(struct mtd_info *mtd,
 }
 
 static int spinand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
-		uint8_t *buf, int oob_required, int page)
+		u8 *buf, int oob_required, int page)
 {
 	int retval;
 	u8 status;
-	uint8_t *p = buf;
+	u8 *p = buf;
 	int eccsize = chip->ecc.size;
 	int eccsteps = chip->ecc.steps;
 	struct spinand_info *info = (struct spinand_info *)chip->priv;
@@ -667,7 +667,7 @@ static void spinand_select_chip(struct mtd_info *mtd, int dev)
 {
 }
 
-static uint8_t spinand_read_byte(struct mtd_info *mtd)
+static u8 spinand_read_byte(struct mtd_info *mtd)
 {
 	struct spinand_state *state = mtd_to_state(mtd);
 	u8 data;
@@ -707,7 +707,7 @@ static int spinand_wait(struct mtd_info *mtd, struct nand_chip *chip)
 	return 0;
 }
 
-static void spinand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+static void spinand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
 {
 	struct spinand_state *state = mtd_to_state(mtd);
 
@@ -715,7 +715,7 @@ static void spinand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
 	state->buf_ptr += len;
 }
 
-static void spinand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+static void spinand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 {
 	struct spinand_state *state = mtd_to_state(mtd);
 

drivers/staging/mt29f_spinand/mt29f_spinand.h

@@ -84,8 +84,8 @@ struct spinand_info {
 };
 
 struct spinand_state {
-	uint32_t	col;
-	uint32_t	row;
+	u32	col;
+	u32	row;
 	int		buf_ptr;
 	u8		*buf;
 };