Merge tag 'qcom-arm64-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm into next/arm64

Qualcomm ARM64 Updates for v4.3

* Add BLSP and required pinctrl info for MSM8916
* Add SDHC aliases and nodes for MSM8916
* Add USB nodes for MSM8916
* Add APQ8016 SBC specific USB configuration
* Add APQ8016 LED configuration

* tag 'qcom-arm64-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm:
  arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes
  arm64: dts: qcom: Fix apq8016-sbc board USB related pin definitions
  arm64: dts: qcom: apq8016-sbc: Don't hog client driver pins
  arm64: dts: qcom: Add msm8916 USB configuration nodes
  arm64: dts: qcom: Add msm8916 sdhci configuration nodes
  arm64: dts: qcom: Add msm8916 BLSP device nodes
  arm64: dts: qcom: Extend msm8916 pinctrl device coverage
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi

@@ -2,27 +2,37 @@
 
 &pm8916_gpios {
 
-	pinctrl-names = "default";
-	pinctrl-0 = <&pm8916_gpios_default>;
-
-	pm8916_gpios_default: default {
-		usb_hub_reset_pm {
-			pins = "gpio1";
+	usb_hub_reset_pm: usb_hub_reset_pm {
+		pinconf {
+			pins = "gpio3";
 			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
 		};
-		usb_sw_sel_pm {
-			pins = "gpio2";
+	};
+
+	usb_sw_sel_pm: usb_sw_sel_pm {
+		pinconf {
+			pins = "gpio4";
 			function = PMIC_GPIO_FUNC_NORMAL;
+			power-source = <PM8916_GPIO_VPH>;
 			input-disable;
 		};
-		usr_led_3_ctrl {
-			pins = "gpio3";
+	};
+
+	pm8916_gpios_leds: pm8916_gpios_leds {
+		pinconf {
+			pins = "gpio1", "gpio2";
 			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
 		};
-		usr_led_4_ctrl {
-			pins = "gpio4";
+	};
+};
+
+&pm8916_mpps {
+
+	pm8916_mpps_leds: pm8916_mpps_leds {
+		pinconf {
+			pins = "mpp2", "mpp3";
 			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
 		};

arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi

@@ -3,17 +3,9 @@
 
 &msmgpio {
 
-	pinctrl-names = "default";
-	pinctrl-0 = <&soc_gpios_default>;
-
-	soc_gpios_default: default {
-		usr_led_1_ctrl_default: usr_led_1_ctrl_default {
-			pins = "gpio21";
-			function = "gpio";
-			output-low;
-		};
-		usr_led_2_ctrl_default: usr_led_2_ctrl_default {
-			pins = "gpio120";
+	msmgpio_leds: msmgpio_leds {
+		pinconf {
+			pins = "gpio21", "gpio120";
 			function = "gpio";
 			output-low;
 		};

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi

@@ -32,5 +32,56 @@ serial@78b0000 {
 			pinctrl-0 = <&blsp1_uart2_default>;
 			pinctrl-1 = <&blsp1_uart2_sleep>;
 		};
+
+		leds {
+			pinctrl-names = "default";
+			pinctrl-0 = <&msmgpio_leds>,
+				    <&pm8916_gpios_leds>,
+				    <&pm8916_mpps_leds>;
+
+			compatible = "gpio-leds";
+
+			led@1 {
+				label = "apq8016-sbc:green:user1";
+				gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "heartbeat";
+				default-state = "off";
+			};
+
+			led@2 {
+				label = "apq8016-sbc:green:user2";
+				gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+
+			led@3 {
+				label = "apq8016-sbc:green:user3";
+				gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "mmc1";
+				default-state = "off";
+			};
+
+			led@4 {
+				label = "apq8016-sbc:green:user4";
+				gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "none";
+				default-state = "off";
+			};
+
+			led@5 {
+				label = "apq8016-sbc:yellow:wlan";
+				gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "wlan";
+				default-state = "off";
+			};
+
+			led@6 {
+				label = "apq8016-sbc:blue:bt";
+				gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "bt";
+				default-state = "off";
+			};
+		};
 	};
 };

arch/arm64/boot/dts/qcom/msm8916-pins.dtsi

+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+&msmgpio {
+
+	blsp1_uart2_default: blsp1_uart2_default {
+		pinmux {
+			function = "blsp_uart2";
+			pins = "gpio4", "gpio5";
+		};
+		pinconf {
+			pins = "gpio4", "gpio5";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp1_uart2_sleep: blsp1_uart2_sleep {
+		pinmux {
+			function = "blsp_uart2";
+			pins = "gpio4", "gpio5";
+		};
+		pinconf {
+			pins = "gpio4", "gpio5";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	spi1_default: spi1_default {
+		pinmux {
+			function = "blsp_spi1";
+			pins = "gpio0", "gpio1", "gpio3";
+		};
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio2";
+		};
+		pinconf {
+			pins = "gpio0", "gpio1", "gpio3";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pinconf_cs {
+			pins = "gpio2";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spi1_sleep: spi1_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		};
+		pinconf {
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	spi2_default: spi2_default {
+		pinmux {
+			function = "blsp_spi2";
+			pins = "gpio4", "gpio5", "gpio7";
+		};
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio6";
+		};
+		pinconf {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pinconf_cs {
+			pins = "gpio6";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spi2_sleep: spi2_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+		};
+		pinconf {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	spi3_default: spi3_default {
+		pinmux {
+			function = "blsp_spi3";
+			pins = "gpio8", "gpio9", "gpio11";
+		};
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio10";
+		};
+		pinconf {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pinconf_cs {
+			pins = "gpio10";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spi3_sleep: spi3_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+		};
+		pinconf {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	spi4_default: spi4_default {
+		pinmux {
+			function = "blsp_spi4";
+			pins = "gpio12", "gpio13", "gpio15";
+		};
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio14";
+		};
+		pinconf {
+			pins = "gpio12", "gpio13", "gpio14", "gpio15";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pinconf_cs {
+			pins = "gpio14";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spi4_sleep: spi4_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio12", "gpio13", "gpio14", "gpio15";
+		};
+		pinconf {
+			pins = "gpio12", "gpio13", "gpio14", "gpio15";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	spi5_default: spi5_default {
+		pinmux {
+			function = "blsp_spi5";
+			pins = "gpio16", "gpio17", "gpio19";
+		};
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio18";
+		};
+		pinconf {
+			pins = "gpio16", "gpio17", "gpio18", "gpio19";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pinconf_cs {
+			pins = "gpio18";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spi5_sleep: spi5_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio16", "gpio17", "gpio18", "gpio19";
+		};
+		pinconf {
+			pins = "gpio16", "gpio17", "gpio18", "gpio19";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	spi6_default: spi6_default {
+		pinmux {
+			function = "blsp_spi6";
+			pins = "gpio20", "gpio21", "gpio23";
+		};
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio22";
+		};
+		pinconf {
+			pins = "gpio20", "gpio21", "gpio22", "gpio23";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pinconf_cs {
+			pins = "gpio22";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spi6_sleep: spi6_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio20", "gpio21", "gpio22", "gpio23";
+		};
+		pinconf {
+			pins = "gpio20", "gpio21", "gpio22", "gpio23";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	i2c4_default: i2c4_default {
+		pinmux {
+			function = "blsp_i2c4";
+			pins = "gpio14", "gpio15";
+		};
+		pinconf {
+			pins = "gpio14", "gpio15";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c4_sleep: i2c4_sleep {
+		pinmux {
+			function = "blsp_i2c4";
+			pins = "gpio14", "gpio15";
+		};
+		pinconf {
+			pins = "gpio14", "gpio15";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	sdhc2_cd_pin {
+		sdc2_cd_on: cd_on {
+			pinmux {
+				function = "gpio";
+				pins = "gpio38";
+			};
+			pinconf {
+				pins = "gpio38";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+		sdc2_cd_off: cd_off {
+			pinmux {
+				function = "gpio";
+				pins = "gpio38";
+			};
+			pinconf {
+				pins = "gpio38";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	pmx_sdc1_clk {
+		sdc1_clk_on: clk_on {
+			pinmux {
+				pins = "sdc1_clk";
+			};
+			pinconf {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <16>;
+			};
+		};
+		sdc1_clk_off: clk_off {
+			pinmux {
+				pins = "sdc1_clk";
+			};
+			pinconf {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+		};
+	};
+
+	pmx_sdc1_cmd {
+		sdc1_cmd_on: cmd_on {
+			pinmux {
+				pins = "sdc1_cmd";
+			};
+			pinconf {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+		};
+		sdc1_cmd_off: cmd_off {
+			pinmux {
+				pins = "sdc1_cmd";
+			};
+			pinconf {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+		};
+	};
+
+	pmx_sdc1_data {
+		sdc1_data_on: data_on {
+			pinmux {
+				pins = "sdc1_data";
+			};
+			pinconf {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+		};
+		sdc1_data_off: data_off {
+			pinmux {
+				pins = "sdc1_data";
+			};
+			pinconf {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+		};
+	};
+
+	pmx_sdc2_clk {
+		sdc2_clk_on: clk_on {
+			pinmux {
+				pins = "sdc2_clk";
+			};
+			pinconf {
+				pins = "sdc2_clk";
+				bias-disable;
+				drive-strength = <16>;
+			};
+		};
+		sdc2_clk_off: clk_off {
+			pinmux {
+				pins = "sdc2_clk";
+			};
+			pinconf {
+				pins = "sdc2_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+		};
+	};
+
+	pmx_sdc2_cmd {
+		sdc2_cmd_on: cmd_on {
+			pinmux {
+				pins = "sdc2_cmd";
+			};
+			pinconf {
+				pins = "sdc2_cmd";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+		};
+		sdc2_cmd_off: cmd_off {
+			pinmux {
+				pins = "sdc2_cmd";
+			};
+			pinconf {
+				pins = "sdc2_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+		};
+	};
+
+	pmx_sdc2_data {
+		sdc2_data_on: data_on {
+			pinmux {
+				pins = "sdc2_data";
+			};
+			pinconf {
+				pins = "sdc2_data";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+		};
+		sdc2_data_off: data_off {
+			pinmux {
+				pins = "sdc2_data";
+			};
+			pinconf {
+				pins = "sdc2_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+		};
+	};
+};

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -24,7 +24,10 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	aliases { };
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		sdhc2 = &sdhc_2; /* SDC2 SD card slot */
+	};
 
 	chosen { };
 
@@ -90,30 +93,6 @@ msmgpio: pinctrl@1000000 {
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-
-			blsp1_uart2_default: blsp1_uart2_default {
-				pinmux {
-					function = "blsp_uart2";
-					pins = "gpio4", "gpio5";
-				};
-				pinconf {
-					pins = "gpio4", "gpio5";
-					drive-strength = <16>;
-					bias-disable;
-				};
-			};
-
-			blsp1_uart2_sleep: blsp1_uart2_sleep {
-				pinmux {
-					function = "blsp_uart2";
-					pins = "gpio4", "gpio5";
-				};
-				pinconf {
-					pins = "gpio4", "gpio5";
-					drive-strength = <2>;
-					bias-pull-down;
-				};
-			};
 		};
 
 		gcc: qcom,gcc@1800000 {
@@ -132,6 +111,202 @@ blsp1_uart2: serial@78b0000 {
 			status = "disabled";
 		};
 
+		blsp_dma: dma@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x23000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 5>, <&blsp_dma 4>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi1_default>;
+			pinctrl-1 = <&spi1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi2: spi@78b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 7>, <&blsp_dma 6>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi2_default>;
+			pinctrl-1 = <&spi2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 9>, <&blsp_dma 8>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi3_default>;
+			pinctrl-1 = <&spi3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi4: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 11>, <&blsp_dma 10>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi4_default>;
+			pinctrl-1 = <&spi4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b9000 0x600>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 13>, <&blsp_dma 12>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi5_default>;
+			pinctrl-1 = <&spi5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi6: spi@78ba000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078ba000 0x600>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 15>, <&blsp_dma 14>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi6_default>;
+			pinctrl-1 = <&spi6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78b8000 0x1000>;
+			interrupts = <GIC_SPI 98 0>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c4_default>;
+			pinctrl-1 = <&i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sdhc_1: sdhci@07824000 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+
+			interrupts = <0 123 0>, <0 138 0>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&gcc GCC_SDCC1_AHB_CLK>;
+			clock-names = "core", "iface";
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc_2: sdhci@07864000 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+
+			interrupts = <0 125 0>, <0 221 0>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&gcc GCC_SDCC2_AHB_CLK>;
+			clock-names = "core", "iface";
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		usb_dev: usb@78d9000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x78d9000 0x400>;
+			dr_mode = "peripheral";
+			interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+			usb-phy = <&usb_otg>;
+			status = "disabled";
+		};
+
+		usb_host: ehci@78d9000 {
+			compatible = "qcom,ehci-host";
+			reg = <0x78d9000 0x400>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+			usb-phy = <&usb_otg>;
+			status = "disabled";
+		};
+
+		usb_otg: phy@78d9000 {
+			compatible = "qcom,usb-otg-snps";
+			reg = <0x78d9000 0x400>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>,
+				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,vdd-levels = <1 5 7>;
+			qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
+			dr_mode = "peripheral";
+			qcom,otg-control = <2>; // PMIC
+
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "iface", "core", "sleep";
+
+			resets = <&gcc GCC_USB2A_PHY_BCR>,
+				 <&gcc GCC_USB_HS_BCR>;
+			reset-names = "phy", "link";
+			status = "disabled";
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
@@ -217,3 +392,5 @@ spmi_bus: spmi@200f000 {
 		};
 	};
 };
+
+#include "msm8916-pins.dtsi"