Commit 7580d774 authored by Maarten Lankhorst's avatar Maarten Lankhorst

drm/i915: Wait for object idle without locks in atomic_commit, v2.

Make pinning and waiting a separate step, and wait for object idle
without struct_mutex held.

Changes since v1:
- Do not wait when a reset is in progress.
- Remove call to i915_gem_object_wait_rendering for
  intel_overlay_do_put_image (Chris Wilson)
Signed-off-by: default avatarMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
parent f935675f
......@@ -3017,8 +3017,6 @@ i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write);
int __must_check
i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
u32 alignment,
struct intel_engine_cs *pipelined,
struct drm_i915_gem_request **pipelined_request,
const struct i915_ggtt_view *view);
void i915_gem_object_unpin_from_display_plane(struct drm_i915_gem_object *obj,
const struct i915_ggtt_view *view);
......
......@@ -3883,17 +3883,11 @@ int i915_gem_set_caching_ioctl(struct drm_device *dev, void *data,
int
i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
u32 alignment,
struct intel_engine_cs *pipelined,
struct drm_i915_gem_request **pipelined_request,
const struct i915_ggtt_view *view)
{
u32 old_read_domains, old_write_domain;
int ret;
ret = i915_gem_object_sync(obj, pipelined, pipelined_request);
if (ret)
return ret;
/* Mark the pin_display early so that we account for the
* display coherency whilst setting up the cache domains.
*/
......
......@@ -84,6 +84,7 @@ intel_plane_duplicate_state(struct drm_plane *plane)
state = &intel_state->base;
__drm_atomic_helper_plane_duplicate_state(plane, state);
intel_state->wait_req = NULL;
return state;
}
......@@ -100,6 +101,7 @@ void
intel_plane_destroy_state(struct drm_plane *plane,
struct drm_plane_state *state)
{
WARN_ON(state && to_intel_plane_state(state)->wait_req);
drm_atomic_helper_plane_destroy_state(plane, state);
}
......
......@@ -2320,9 +2320,7 @@ static unsigned int intel_linear_alignment(struct drm_i915_private *dev_priv)
int
intel_pin_and_fence_fb_obj(struct drm_plane *plane,
struct drm_framebuffer *fb,
const struct drm_plane_state *plane_state,
struct intel_engine_cs *pipelined,
struct drm_i915_gem_request **pipelined_request)
const struct drm_plane_state *plane_state)
{
struct drm_device *dev = fb->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
......@@ -2378,8 +2376,8 @@ intel_pin_and_fence_fb_obj(struct drm_plane *plane,
*/
intel_runtime_pm_get(dev_priv);
ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined,
pipelined_request, &view);
ret = i915_gem_object_pin_to_display_plane(obj, alignment,
&view);
if (ret)
goto err_pm;
......@@ -11426,9 +11424,14 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
* synchronisation, so all we want here is to pin the framebuffer
* into the display plane and skip any waits.
*/
if (!mmio_flip) {
ret = i915_gem_object_sync(obj, ring, &request);
if (ret)
goto cleanup_pending;
}
ret = intel_pin_and_fence_fb_obj(crtc->primary, fb,
crtc->primary->state,
mmio_flip ? i915_gem_request_get_ring(obj->last_write_req) : ring, &request);
crtc->primary->state);
if (ret)
goto cleanup_pending;
......@@ -13150,7 +13153,10 @@ static int intel_atomic_prepare_commit(struct drm_device *dev,
struct drm_atomic_state *state,
bool async)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_plane_state *plane_state;
struct drm_crtc_state *crtc_state;
struct drm_plane *plane;
struct drm_crtc *crtc;
int i, ret;
......@@ -13163,6 +13169,9 @@ static int intel_atomic_prepare_commit(struct drm_device *dev,
ret = intel_crtc_wait_for_pending_flips(crtc);
if (ret)
return ret;
if (atomic_read(&to_intel_crtc(crtc)->unpin_work_count) >= 2)
flush_workqueue(dev_priv->wq);
}
ret = mutex_lock_interruptible(&dev->struct_mutex);
......@@ -13170,6 +13179,37 @@ static int intel_atomic_prepare_commit(struct drm_device *dev,
return ret;
ret = drm_atomic_helper_prepare_planes(dev, state);
if (!ret && !async && !i915_reset_in_progress(&dev_priv->gpu_error)) {
u32 reset_counter;
reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter);
mutex_unlock(&dev->struct_mutex);
for_each_plane_in_state(state, plane, plane_state, i) {
struct intel_plane_state *intel_plane_state =
to_intel_plane_state(plane_state);
if (!intel_plane_state->wait_req)
continue;
ret = __i915_wait_request(intel_plane_state->wait_req,
reset_counter, true,
NULL, NULL);
/* Swallow -EIO errors to allow updates during hw lockup. */
if (ret == -EIO)
ret = 0;
if (ret)
break;
}
if (!ret)
return 0;
mutex_lock(&dev->struct_mutex);
drm_atomic_helper_cleanup_planes(dev, state);
}
mutex_unlock(&dev->struct_mutex);
return ret;
......@@ -13196,15 +13236,17 @@ static int intel_atomic_commit(struct drm_device *dev,
bool async)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
struct drm_crtc *crtc;
int ret = 0;
int i;
bool any_ms = false;
ret = intel_atomic_prepare_commit(dev, state, async);
if (ret)
if (ret) {
DRM_DEBUG_ATOMIC("Preparing state failed with %i\n", ret);
return ret;
}
drm_atomic_helper_swap_state(dev, state);
dev_priv->wm.config = to_intel_atomic_state(state)->wm_config;
......@@ -13495,11 +13537,20 @@ intel_prepare_plane_fb(struct drm_plane *plane,
if (ret)
DRM_DEBUG_KMS("failed to attach phys object\n");
} else {
ret = intel_pin_and_fence_fb_obj(plane, fb, new_state, NULL, NULL);
ret = intel_pin_and_fence_fb_obj(plane, fb, new_state);
}
if (ret == 0)
if (ret == 0) {
if (obj) {
struct intel_plane_state *plane_state =
to_intel_plane_state(new_state);
i915_gem_request_assign(&plane_state->wait_req,
obj->last_write_req);
}
i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bit);
}
return ret;
}
......@@ -13519,9 +13570,12 @@ intel_cleanup_plane_fb(struct drm_plane *plane,
{
struct drm_device *dev = plane->dev;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_plane_state *old_intel_state;
struct drm_i915_gem_object *old_obj = intel_fb_obj(old_state->fb);
struct drm_i915_gem_object *obj = intel_fb_obj(plane->state->fb);
old_intel_state = to_intel_plane_state(old_state);
if (!obj && !old_obj)
return;
......@@ -13533,6 +13587,9 @@ intel_cleanup_plane_fb(struct drm_plane *plane,
if ((old_obj && (old_obj->frontbuffer_bits & intel_plane->frontbuffer_bit)) ||
(obj && !(obj->frontbuffer_bits & intel_plane->frontbuffer_bit)))
i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bit);
i915_gem_request_assign(&old_intel_state->wait_req, NULL);
}
int
......@@ -15498,8 +15555,7 @@ void intel_modeset_gem_init(struct drm_device *dev)
mutex_lock(&dev->struct_mutex);
ret = intel_pin_and_fence_fb_obj(c->primary,
c->primary->fb,
c->primary->state,
NULL, NULL);
c->primary->state);
mutex_unlock(&dev->struct_mutex);
if (ret) {
DRM_ERROR("failed to pin boot fb on pipe %d\n",
......
......@@ -281,6 +281,9 @@ struct intel_plane_state {
int scaler_id;
struct drm_intel_sprite_colorkey ckey;
/* async flip related structures */
struct drm_i915_gem_request *wait_req;
};
struct intel_initial_plane_config {
......@@ -1084,9 +1087,7 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
struct drm_modeset_acquire_ctx *ctx);
int intel_pin_and_fence_fb_obj(struct drm_plane *plane,
struct drm_framebuffer *fb,
const struct drm_plane_state *plane_state,
struct intel_engine_cs *pipelined,
struct drm_i915_gem_request **pipelined_request);
const struct drm_plane_state *plane_state);
struct drm_framebuffer *
__intel_framebuffer_create(struct drm_device *dev,
struct drm_mode_fb_cmd2 *mode_cmd,
......
......@@ -161,7 +161,7 @@ static int intelfb_alloc(struct drm_fb_helper *helper,
}
/* Flush everything out, we'll be doing GTT only from now on */
ret = intel_pin_and_fence_fb_obj(NULL, fb, NULL, NULL, NULL);
ret = intel_pin_and_fence_fb_obj(NULL, fb, NULL);
if (ret) {
DRM_ERROR("failed to pin obj: %d\n", ret);
goto out_fb;
......
......@@ -749,7 +749,7 @@ static int intel_overlay_do_put_image(struct intel_overlay *overlay,
if (ret != 0)
return ret;
ret = i915_gem_object_pin_to_display_plane(new_bo, 0, NULL, NULL,
ret = i915_gem_object_pin_to_display_plane(new_bo, 0,
&i915_ggtt_view_normal);
if (ret != 0)
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment