net/ncsi: Don't take any action on HNCDSC AEN

The current HNCDSC handler takes the status flag from the AEN packet and
will update or change the current channel based on this flag and the
current channel status.

However the flag from the HNCDSC packet merely represents the host link
state. While the state of the host interface is potentially interesting
information it should not affect the state of the NCSI link. Indeed the
NCSI specification makes no mention of any recommended action related to
the host network controller driver state.

Update the HNCDSC handler to record the host network driver status but
take no other action.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ncsi/ncsi-aen.c

@@ -143,43 +143,14 @@ static int ncsi_aen_handler_hncdsc(struct ncsi_dev_priv *ndp,
 	if (!nc)
 		return -ENODEV;
 
-	/* If the channel is active one, we need reconfigure it */
 	spin_lock_irqsave(&nc->lock, flags);
 	ncm = &nc->modes[NCSI_MODE_LINK];
 	hncdsc = (struct ncsi_aen_hncdsc_pkt *)h;
 	ncm->data[3] = ntohl(hncdsc->status);
-	netdev_info(ndp->ndev.dev, "NCSI: HNCDSC AEN - channel %u state %s\n",
-		    nc->id, ncm->data[3] & 0x3 ? "up" : "down");
-	if (!list_empty(&nc->link) ||
-	    nc->state != NCSI_CHANNEL_ACTIVE) {
-		spin_unlock_irqrestore(&nc->lock, flags);
-		return 0;
-	}
-
-	spin_unlock_irqrestore(&nc->lock, flags);
-	if (!(ndp->flags & NCSI_DEV_HWA) && !(ncm->data[3] & 0x1))
-		ndp->flags |= NCSI_DEV_RESHUFFLE;
-
-	/* If this channel is the active one and the link doesn't
-	 * work, we have to choose another channel to be active one.
-	 * The logic here is exactly similar to what we do when link
-	 * is down on the active channel.
-	 *
-	 * On the other hand, we need configure it when host driver
-	 * state on the active channel becomes ready.
-	 */
-	ncsi_stop_channel_monitor(nc);
-
-	spin_lock_irqsave(&nc->lock, flags);
-	nc->state = (ncm->data[3] & 0x1) ? NCSI_CHANNEL_INACTIVE :
-					   NCSI_CHANNEL_ACTIVE;
 	spin_unlock_irqrestore(&nc->lock, flags);
-
-	spin_lock_irqsave(&ndp->lock, flags);
-	list_add_tail_rcu(&nc->link, &ndp->channel_queue);
-	spin_unlock_irqrestore(&ndp->lock, flags);
-
-	ncsi_process_next_channel(ndp);
+	netdev_printk(KERN_DEBUG, ndp->ndev.dev,
+		      "NCSI: host driver %srunning on channel %u\n",
+		      ncm->data[3] & 0x1 ? "" : "not ", nc->id);
 
 	return 0;
 }