perf vendor events intel: Add uncore events for Broadwell DE

This is not a full uncore event list, but a short list of useful
and understandable metrics.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-c0cix4eprbldfrx5zf60suvh@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools/perf/pmu-events/arch/x86/broadwellde/uncore-memory.json

+[
+    {
+        "BriefDescription": "read requests to memory controller. Derived from unc_m_cas_count.rd",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x4",
+        "EventName": "UNC_M_CAS_COUNT.RD",
+        "PerPkg": "1",
+        "ScaleUnit": "64Bytes",
+        "UMask": "0x3",
+        "Unit": "iMC"
+    },
+    {
+        "BriefDescription": "write requests to memory controller. Derived from unc_m_cas_count.wr",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x4",
+        "EventName": "UNC_M_CAS_COUNT.WR",
+        "PerPkg": "1",
+        "ScaleUnit": "64Bytes",
+        "UMask": "0xC",
+        "Unit": "iMC"
+    },
+    {
+        "BriefDescription": "Memory controller clock ticks. Derived from unc_m_clockticks",
+        "Counter": "0,1,2,3",
+        "EventName": "UNC_M_CLOCKTICKS",
+        "PerPkg": "1",
+        "Unit": "iMC"
+    },
+    {
+        "BriefDescription": "Cycles where DRAM ranks are in power down (CKE) mode. Derived from unc_m_power_channel_ppd",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x85",
+        "EventName": "UNC_M_POWER_CHANNEL_PPD",
+        "MetricExpr": "(UNC_M_POWER_CHANNEL_PPD / UNC_M_CLOCKTICKS) * 100.",
+        "PerPkg": "1",
+        "Unit": "iMC"
+    },
+    {
+        "BriefDescription": "Cycles all ranks are in critical thermal throttle. Derived from unc_m_power_critical_throttle_cycles",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x86",
+        "EventName": "UNC_M_POWER_CRITICAL_THROTTLE_CYCLES",
+        "MetricExpr": "(UNC_M_POWER_CRITICAL_THROTTLE_CYCLES / UNC_M_CLOCKTICKS) * 100.",
+        "PerPkg": "1",
+        "Unit": "iMC"
+    },
+    {
+        "BriefDescription": "Cycles Memory is in self refresh power mode. Derived from unc_m_power_self_refresh",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x43",
+        "EventName": "UNC_M_POWER_SELF_REFRESH",
+        "MetricExpr": "(UNC_M_POWER_SELF_REFRESH / UNC_M_CLOCKTICKS) * 100.",
+        "PerPkg": "1",
+        "Unit": "iMC"
+    },
+    {
+        "BriefDescription": "Pre-charges due to page misses. Derived from unc_m_pre_count.page_miss",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x2",
+        "EventName": "UNC_M_PRE_COUNT.PAGE_MISS",
+        "PerPkg": "1",
+        "UMask": "0x1",
+        "Unit": "iMC"
+    },
+    {
+        "BriefDescription": "Pre-charge for reads. Derived from unc_m_pre_count.rd",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x2",
+        "EventName": "UNC_M_PRE_COUNT.RD",
+        "PerPkg": "1",
+        "UMask": "0x4",
+        "Unit": "iMC"
+    },
+    {
+        "BriefDescription": "Pre-charge for writes. Derived from unc_m_pre_count.wr",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x2",
+        "EventName": "UNC_M_PRE_COUNT.WR",
+        "PerPkg": "1",
+        "UMask": "0x8",
+        "Unit": "iMC"
+    }
+]

tools/perf/pmu-events/arch/x86/broadwellde/uncore-power.json

+[
+    {
+        "BriefDescription": "PCU clock ticks. Use to get percentages of PCU cycles events. Derived from unc_p_clockticks",
+        "Counter": "0,1,2,3",
+        "EventName": "UNC_P_CLOCKTICKS",
+        "PerPkg": "1",
+        "Unit": "PCU"
+    },
+    {
+        "BriefDescription": "C0 and C1. Derived from unc_p_power_state_occupancy.cores_c0",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x80",
+        "EventName": "UNC_P_POWER_STATE_OCCUPANCY.CORES_C0",
+        "Filter": "occ_sel=1",
+        "MetricExpr": "(UNC_P_POWER_STATE_OCCUPANCY.CORES_C0 / UNC_P_CLOCKTICKS) * 100.",
+        "PerPkg": "1",
+        "Unit": "PCU"
+    },
+    {
+        "BriefDescription": "C3. Derived from unc_p_power_state_occupancy.cores_c3",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x80",
+        "EventName": "UNC_P_POWER_STATE_OCCUPANCY.CORES_C3",
+        "Filter": "occ_sel=2",
+        "MetricExpr": "(UNC_P_POWER_STATE_OCCUPANCY.CORES_C3 / UNC_P_CLOCKTICKS) * 100.",
+        "PerPkg": "1",
+        "Unit": "PCU"
+    },
+    {
+        "BriefDescription": "C6 and C7. Derived from unc_p_power_state_occupancy.cores_c6",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x80",
+        "EventName": "UNC_P_POWER_STATE_OCCUPANCY.CORES_C6",
+        "Filter": "occ_sel=3",
+        "MetricExpr": "(UNC_P_POWER_STATE_OCCUPANCY.CORES_C6 / UNC_P_CLOCKTICKS) * 100.",
+        "PerPkg": "1",
+        "Unit": "PCU"
+    },
+    {
+        "BriefDescription": "External Prochot. Derived from unc_p_prochot_external_cycles",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xA",
+        "EventName": "UNC_P_PROCHOT_EXTERNAL_CYCLES",
+        "MetricExpr": "(UNC_P_PROCHOT_EXTERNAL_CYCLES / UNC_P_CLOCKTICKS) * 100.",
+        "PerPkg": "1",
+        "Unit": "PCU"
+    },
+    {
+        "BriefDescription": "Thermal Strongest Upper Limit Cycles. Derived from unc_p_freq_max_limit_thermal_cycles",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x4",
+        "EventName": "UNC_P_FREQ_MAX_LIMIT_THERMAL_CYCLES",
+        "MetricExpr": "(UNC_P_FREQ_MAX_LIMIT_THERMAL_CYCLES / UNC_P_CLOCKTICKS) * 100.",
+        "PerPkg": "1",
+        "Unit": "PCU"
+    },
+    {
+        "BriefDescription": "OS Strongest Upper Limit Cycles. Derived from unc_p_freq_max_os_cycles",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x6",
+        "EventName": "UNC_P_FREQ_MAX_OS_CYCLES",
+        "MetricExpr": "(UNC_P_FREQ_MAX_OS_CYCLES / UNC_P_CLOCKTICKS) * 100.",
+        "PerPkg": "1",
+        "Unit": "PCU"
+    },
+    {
+        "BriefDescription": "Power Strongest Upper Limit Cycles. Derived from unc_p_freq_max_power_cycles",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x5",
+        "EventName": "UNC_P_FREQ_MAX_POWER_CYCLES",
+        "MetricExpr": "(UNC_P_FREQ_MAX_POWER_CYCLES / UNC_P_CLOCKTICKS) * 100.",
+        "PerPkg": "1",
+        "Unit": "PCU"
+    },
+    {
+        "BriefDescription": "Cycles spent changing Frequency. Derived from unc_p_freq_trans_cycles",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x74",
+        "EventName": "UNC_P_FREQ_TRANS_CYCLES",
+        "MetricExpr": "(UNC_P_FREQ_TRANS_CYCLES / UNC_P_CLOCKTICKS) * 100.",
+        "PerPkg": "1",
+        "Unit": "PCU"
+    }
+]