Commit 76b26694 authored by Ron Mercer's avatar Ron Mercer Committed by David S. Miller

qlge: Fix RX multicast filter settings.

The addresses were being added to the filter properly, but were not
being enabled.  This adds enable bit to filter write.
Signed-off-by: default avatarRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e163d7f2
......@@ -320,6 +320,37 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type,
switch (type) {
case MAC_ADDR_TYPE_MULTI_MAC:
{
u32 upper = (addr[0] << 8) | addr[1];
u32 lower = (addr[2] << 24) | (addr[3] << 16) |
(addr[4] << 8) | (addr[5]);
status =
ql_wait_reg_rdy(qdev,
MAC_ADDR_IDX, MAC_ADDR_MW, 0);
if (status)
goto exit;
ql_write32(qdev, MAC_ADDR_IDX, (offset++) |
(index << MAC_ADDR_IDX_SHIFT) |
type | MAC_ADDR_E);
ql_write32(qdev, MAC_ADDR_DATA, lower);
status =
ql_wait_reg_rdy(qdev,
MAC_ADDR_IDX, MAC_ADDR_MW, 0);
if (status)
goto exit;
ql_write32(qdev, MAC_ADDR_IDX, (offset++) |
(index << MAC_ADDR_IDX_SHIFT) |
type | MAC_ADDR_E);
ql_write32(qdev, MAC_ADDR_DATA, upper);
status =
ql_wait_reg_rdy(qdev,
MAC_ADDR_IDX, MAC_ADDR_MW, 0);
if (status)
goto exit;
break;
}
case MAC_ADDR_TYPE_CAM_MAC:
{
u32 cam_output;
......@@ -365,16 +396,14 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type,
and possibly the function id. Right now we hardcode
the route field to NIC core.
*/
if (type == MAC_ADDR_TYPE_CAM_MAC) {
cam_output = (CAM_OUT_ROUTE_NIC |
(qdev->
func << CAM_OUT_FUNC_SHIFT) |
(0 << CAM_OUT_CQ_ID_SHIFT));
if (qdev->vlgrp)
cam_output |= CAM_OUT_RV;
/* route to NIC core */
ql_write32(qdev, MAC_ADDR_DATA, cam_output);
}
cam_output = (CAM_OUT_ROUTE_NIC |
(qdev->
func << CAM_OUT_FUNC_SHIFT) |
(0 << CAM_OUT_CQ_ID_SHIFT));
if (qdev->vlgrp)
cam_output |= CAM_OUT_RV;
/* route to NIC core */
ql_write32(qdev, MAC_ADDR_DATA, cam_output);
break;
}
case MAC_ADDR_TYPE_VLAN:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment