mmc: sdio: print correct UHS mode during card detection

When SDIO3.0 card is detected, incorrect bus speed mode
is printed as part of card detection print in kernel logs.

This change fixes it so that user won't be confused by
looking at incorrect card detection message in logs.
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Tested-by: Jackey Shen <Jackey.Shen@amd.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

drivers/mmc/core/sdio.c

@@ -485,23 +485,27 @@ static int sdio_set_bus_speed_mode(struct mmc_card *card)
 			bus_speed = SDIO_SPEED_SDR104;
 			timing = MMC_TIMING_UHS_SDR104;
 			card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR;
+			card->sd_bus_speed = UHS_SDR104_BUS_SPEED;
 	} else if ((card->host->caps & MMC_CAP_UHS_DDR50) &&
 		   (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) {
 			bus_speed = SDIO_SPEED_DDR50;
 			timing = MMC_TIMING_UHS_DDR50;
 			card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR;
+			card->sd_bus_speed = UHS_DDR50_BUS_SPEED;
 	} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
 		    MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode &
 		    SD_MODE_UHS_SDR50)) {
 			bus_speed = SDIO_SPEED_SDR50;
 			timing = MMC_TIMING_UHS_SDR50;
 			card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR;
+			card->sd_bus_speed = UHS_SDR50_BUS_SPEED;
 	} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
 		    MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) &&
 		   (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) {
 			bus_speed = SDIO_SPEED_SDR25;
 			timing = MMC_TIMING_UHS_SDR25;
 			card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR;
+			card->sd_bus_speed = UHS_SDR25_BUS_SPEED;
 	} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
 		    MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 |
 		    MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode &
@@ -509,6 +513,7 @@ static int sdio_set_bus_speed_mode(struct mmc_card *card)
 			bus_speed = SDIO_SPEED_SDR12;
 			timing = MMC_TIMING_UHS_SDR12;
 			card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR;
+			card->sd_bus_speed = UHS_SDR12_BUS_SPEED;
 	}
 
 	err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);