MIPS: Alchemy: Stop IRQ name sharing

Eliminate the sharing of IRQ names among the differenct Alchemy
variants.  IRQ numbers need no longer be hidden behind a
CONFIG_SOC_AU1XXX symbol: step 1 in my quest to make the Alchemy
code less reliant on a hardcoded subtype.

This patch also renames the GPIO irq number constants. It's really
an interrupt line, NOT a GPIO number!

Code which relied on certain irq numbers to have the same name
across all supported cpu subtypes is changed to determine current
cpu subtype at runtime; in some places this isn't possible so
a "compat" symbol is used.

Run-tested on DB1200.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/alchemy/common/dbdma.c

@@ -30,6 +30,7 @@
  *
  */
 
+#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
@@ -58,7 +59,6 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
 
 static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
 static int dbdma_initialized;
-static void au1xxx_dbdma_init(void);
 
 static dbdev_tab_t dbdev_tab[] = {
 #ifdef CONFIG_SOC_AU1550
@@ -250,8 +250,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 	 * which can't be done successfully during board set up.
 	 */
 	if (!dbdma_initialized)
-		au1xxx_dbdma_init();
-	dbdma_initialized = 1;
+		return 0;
 
 	stp = find_dbdev_id(srcid);
 	if (stp == NULL)
@@ -871,28 +870,6 @@ static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
 	return IRQ_RETVAL(1);
 }
 
-static void au1xxx_dbdma_init(void)
-{
-	int irq_nr;
-
-	dbdma_gptr->ddma_config = 0;
-	dbdma_gptr->ddma_throttle = 0;
-	dbdma_gptr->ddma_inten = 0xffff;
-	au_sync();
-
-#if defined(CONFIG_SOC_AU1550)
-	irq_nr = AU1550_DDMA_INT;
-#elif defined(CONFIG_SOC_AU1200)
-	irq_nr = AU1200_DDMA_INT;
-#else
-	#error Unknown Au1x00 SOC
-#endif
-
-	if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
-			"Au1xxx dbdma", (void *)dbdma_gptr))
-		printk(KERN_ERR "Can't get 1550 dbdma irq");
-}
-
 void au1xxx_dbdma_dump(u32 chanid)
 {
 	chan_tab_t	 *ctp;
@@ -1041,4 +1018,38 @@ void au1xxx_dbdma_resume(void)
 	}
 }
 #endif	/* CONFIG_PM */
+
+static int __init au1xxx_dbdma_init(void)
+{
+	int irq_nr, ret;
+
+	dbdma_gptr->ddma_config = 0;
+	dbdma_gptr->ddma_throttle = 0;
+	dbdma_gptr->ddma_inten = 0xffff;
+	au_sync();
+
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1550:
+		irq_nr = AU1550_DDMA_INT;
+		break;
+	case ALCHEMY_CPU_AU1200:
+		irq_nr = AU1200_DDMA_INT;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	ret = request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
+			"Au1xxx dbdma", (void *)dbdma_gptr);
+	if (ret)
+		printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
+	else {
+		dbdma_initialized = 1;
+		printk(KERN_INFO "Alchemy DBDMA initialized\n");
+	}
+
+	return ret;
+}
+subsys_initcall(au1xxx_dbdma_init);
+
 #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */

arch/mips/alchemy/common/dma.c

@@ -29,6 +29,8 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
+
+#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -188,17 +190,14 @@ int request_au1000_dma(int dev_id, const char *dev_str,
 		dev = &dma_dev_table[dev_id];
 
 	if (irqhandler) {
-		chan->irq = AU1000_DMA_INT_BASE + i;
 		chan->irq_dev = irq_dev_id;
 		ret = request_irq(chan->irq, irqhandler, irqflags, dev_str,
 				  chan->irq_dev);
 		if (ret) {
-			chan->irq = 0;
 			chan->irq_dev = NULL;
 			return ret;
 		}
 	} else {
-		chan->irq = 0;
 		chan->irq_dev = NULL;
 	}
 
@@ -226,13 +225,40 @@ void free_au1000_dma(unsigned int dmanr)
 	}
 
 	disable_dma(dmanr);
-	if (chan->irq)
+	if (chan->irq_dev)
 		free_irq(chan->irq, chan->irq_dev);
 
-	chan->irq = 0;
 	chan->irq_dev = NULL;
 	chan->dev_id = -1;
 }
 EXPORT_SYMBOL(free_au1000_dma);
 
+static int __init au1000_dma_init(void)
+{
+        int base, i;
+
+        switch (alchemy_get_cputype()) {
+        case ALCHEMY_CPU_AU1000:
+                base = AU1000_DMA_INT_BASE;
+                break;
+        case ALCHEMY_CPU_AU1500:
+                base = AU1500_DMA_INT_BASE;
+                break;
+        case ALCHEMY_CPU_AU1100:
+                base = AU1100_DMA_INT_BASE;
+                break;
+        default:
+                goto out;
+        }
+
+        for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
+                au1000_dma_table[i].irq = base + i;
+
+        printk(KERN_INFO "Alchemy DMA initialized\n");
+
+out:
+        return 0;
+}
+arch_initcall(au1000_dma_init);
+
 #endif /* AU1000 AU1500 AU1100 */

arch/mips/alchemy/common/platform.c

@@ -73,8 +73,8 @@ static struct resource au1xxx_usb_ohci_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start		= AU1000_USB_HOST_INT,
-		.end		= AU1000_USB_HOST_INT,
+		.start		= FOR_PLATFORM_C_USB_HOST_INT,
+		.end		= FOR_PLATFORM_C_USB_HOST_INT,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -132,8 +132,8 @@ static struct resource au1xxx_usb_ehci_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start		= AU1000_USB_HOST_INT,
-		.end		= AU1000_USB_HOST_INT,
+		.start		= AU1200_USB_INT,
+		.end		= AU1200_USB_INT,
 		.flags		= IORESOURCE_IRQ,
 	},
 };

arch/mips/alchemy/common/time.c

 /*
- * Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
+ * Copyright (C) 2008-2009 Manuel Lauss <manuel.lauss@gmail.com>
  *
  * Previous incarnations were:
  * Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com>
@@ -85,7 +85,6 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
 	.name		= "rtcmatch2",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
 	.rating		= 100,
-	.irq		= AU1000_RTC_MATCH2_INT,
 	.set_next_event	= au1x_rtcmatch2_set_next_event,
 	.set_mode	= au1x_rtcmatch2_set_mode,
 	.cpumask	= cpu_all_mask,
@@ -98,11 +97,13 @@ static struct irqaction au1x_rtcmatch2_irqaction = {
 	.dev_id		= &au1x_rtcmatch2_clockdev,
 };
 
-void __init plat_time_init(void)
+static int __init alchemy_time_init(unsigned int m2int)
 {
 	struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
 	unsigned long t;
 
+	au1x_rtcmatch2_clockdev.irq = m2int;
+
 	/* Check if firmware (YAMON, ...) has enabled 32kHz and clock
 	 * has been detected.  If so install the rtcmatch2 clocksource,
 	 * otherwise don't bother.  Note that both bits being set is by
@@ -148,13 +149,18 @@ void __init plat_time_init(void)
 	cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
 	cd->min_delta_ns = clockevent_delta2ns(8, cd);	/* ~0.25ms */
 	clockevents_register_device(cd);
-	setup_irq(AU1000_RTC_MATCH2_INT, &au1x_rtcmatch2_irqaction);
+	setup_irq(m2int, &au1x_rtcmatch2_irqaction);
 
 	printk(KERN_INFO "Alchemy clocksource installed\n");
 
-	return;
+	return 0;
 
 cntr_err:
+	return -1;
+}
+
+static void __init alchemy_setup_c0timer(void)
+{
 	/*
 	 * MIPS kernel assigns 'au1k_wait' to 'cpu_wait' before this
 	 * function is called.  Because the Alchemy counters are unusable
@@ -166,3 +172,22 @@ void __init plat_time_init(void)
 	r4k_clockevent_init();
 	init_r4k_clocksource();
 }
+
+static int alchemy_m2inttab[] __initdata = {
+	AU1000_RTC_MATCH2_INT,
+	AU1500_RTC_MATCH2_INT,
+	AU1100_RTC_MATCH2_INT,
+	AU1550_RTC_MATCH2_INT,
+	AU1200_RTC_MATCH2_INT,
+};
+
+void __init plat_time_init(void)
+{
+	int t;
+
+	t = alchemy_get_cputype();
+	if (t == ALCHEMY_CPU_UNKNOWN)
+		alchemy_setup_c0timer();
+	else if (alchemy_time_init(alchemy_m2inttab[t]))
+		alchemy_setup_c0timer();
+}

arch/mips/alchemy/devboards/db1x00/board_setup.c

@@ -39,32 +39,32 @@
 
 #ifdef CONFIG_MIPS_DB1500
 char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371   */
-	[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
+	[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371   */
+	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
 };
 #endif
 
 #ifdef CONFIG_MIPS_BOSPORUS
 char irq_tab_alchemy[][5] __initdata = {
-	[11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI  */
-	[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741   */
-	[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
+	[11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI  */
+	[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741   */
+	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
 };
 #endif
 
 #ifdef CONFIG_MIPS_MIRAGE
 char irq_tab_alchemy[][5] __initdata = {
-	[11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
-	[12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
-	[13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
+	[11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */
+	[12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */
+	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */
 };
 #endif
 
 #ifdef CONFIG_MIPS_DB1550
 char irq_tab_alchemy[][5] __initdata = {
-	[11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
-	[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
-	[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
+	[11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */
+	[12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+	[13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
 };
 #endif
 
@@ -185,21 +185,35 @@ void __init board_setup(void)
 static int __init db1x00_init_irq(void)
 {
 #if defined(CONFIG_MIPS_MIRAGE)
-	set_irq_type(AU1000_GPIO_7, IRQF_TRIGGER_RISING); /* TS pendown */
+	set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */
 #elif defined(CONFIG_MIPS_DB1550)
-	set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW);	/* CD0# */
-	set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW);	/* CD1# */
-	set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW);	/* CARD0# */
-	set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW);	/* CARD1# */
-	set_irq_type(AU1000_GPIO_21, IRQF_TRIGGER_LOW);	/* STSCHG0# */
-	set_irq_type(AU1000_GPIO_22, IRQF_TRIGGER_LOW);	/* STSCHG1# */
-#else
-	set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW);	/* CD0# */
-	set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW);	/* CD1# */
-	set_irq_type(AU1000_GPIO_2, IRQF_TRIGGER_LOW);	/* CARD0# */
-	set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW);	/* CARD1# */
-	set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW);	/* STSCHG0# */
-	set_irq_type(AU1000_GPIO_4, IRQF_TRIGGER_LOW);	/* STSCHG1# */
+	set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);  /* CD0# */
+	set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);  /* CD1# */
+	set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW);  /* CARD0# */
+	set_irq_type(AU1550_GPIO5_INT, IRQF_TRIGGER_LOW);  /* CARD1# */
+	set_irq_type(AU1550_GPIO21_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+	set_irq_type(AU1550_GPIO22_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
+#elif defined(CONFIG_MIPS_DB1500)
+	set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
+	set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
+	set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
+	set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
+	set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+	set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
+#elif defined(CONFIG_MIPS_DB1100)
+	set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
+	set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
+	set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
+	set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
+	set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+	set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
+#elif defined(CONFIG_MIPS_DB1000)
+	set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
+	set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
+	set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
+	set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
+	set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+	set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
 #endif
 	return 0;
 }

arch/mips/alchemy/devboards/db1x00/platform.c

@@ -24,32 +24,46 @@
 #include <asm/mach-au1x00/au1xxx.h>
 #include "../platform.h"
 
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
-    defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
-#define DB1XXX_HAS_PCMCIA
-#endif
-
 /* DB1xxx PCMCIA interrupt sources:
  * CD0/1 	GPIO0/3
  * STSCHG0/1	GPIO1/4
  * CARD0/1	GPIO2/5
  * Db1550:	0/1, 21/22, 3/5
  */
-#ifndef CONFIG_MIPS_DB1550
-/* Db1000, Db1100, Db1500 */
-#define DB1XXX_PCMCIA_CD0	AU1000_GPIO_0
-#define DB1XXX_PCMCIA_STSCHG0	AU1000_GPIO_1
-#define DB1XXX_PCMCIA_CARD0	AU1000_GPIO_2
-#define DB1XXX_PCMCIA_CD1	AU1000_GPIO_3
-#define DB1XXX_PCMCIA_STSCHG1	AU1000_GPIO_4
-#define DB1XXX_PCMCIA_CARD1	AU1000_GPIO_5
+
+#define DB1XXX_HAS_PCMCIA
+
+#if defined(CONFIG_MIPS_DB1000)
+#define DB1XXX_PCMCIA_CD0	AU1000_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0	AU1000_GPIO1_INT
+#define DB1XXX_PCMCIA_CARD0	AU1000_GPIO2_INT
+#define DB1XXX_PCMCIA_CD1	AU1000_GPIO3_INT
+#define DB1XXX_PCMCIA_STSCHG1	AU1000_GPIO4_INT
+#define DB1XXX_PCMCIA_CARD1	AU1000_GPIO5_INT
+#elif defined(CONFIG_MIPS_DB1100)
+#define DB1XXX_PCMCIA_CD0	AU1100_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0	AU1100_GPIO1_INT
+#define DB1XXX_PCMCIA_CARD0	AU1100_GPIO2_INT
+#define DB1XXX_PCMCIA_CD1	AU1100_GPIO3_INT
+#define DB1XXX_PCMCIA_STSCHG1	AU1100_GPIO4_INT
+#define DB1XXX_PCMCIA_CARD1	AU1100_GPIO5_INT
+#elif defined(CONFIG_MIPS_DB1500)
+#define DB1XXX_PCMCIA_CD0	AU1500_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0	AU1500_GPIO1_INT
+#define DB1XXX_PCMCIA_CARD0	AU1500_GPIO2_INT
+#define DB1XXX_PCMCIA_CD1	AU1500_GPIO3_INT
+#define DB1XXX_PCMCIA_STSCHG1	AU1500_GPIO4_INT
+#define DB1XXX_PCMCIA_CARD1	AU1500_GPIO5_INT
+#elif defined(CONFIG_MIPS_DB1550)
+#define DB1XXX_PCMCIA_CD0	AU1550_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0	AU1550_GPIO21_INT
+#define DB1XXX_PCMCIA_CARD0	AU1550_GPIO3_INT
+#define DB1XXX_PCMCIA_CD1	AU1550_GPIO1_INT
+#define DB1XXX_PCMCIA_STSCHG1	AU1550_GPIO22_INT
+#define DB1XXX_PCMCIA_CARD1	AU1550_GPIO5_INT
 #else
-#define DB1XXX_PCMCIA_CD0	AU1000_GPIO_0
-#define DB1XXX_PCMCIA_STSCHG0	AU1500_GPIO_21
-#define DB1XXX_PCMCIA_CARD0	AU1000_GPIO_3
-#define DB1XXX_PCMCIA_CD1	AU1000_GPIO_1
-#define DB1XXX_PCMCIA_STSCHG1	AU1500_GPIO_22
-#define DB1XXX_PCMCIA_CARD1	AU1000_GPIO_5
+/* other board: no PCMCIA */
+#undef DB1XXX_HAS_PCMCIA
 #endif
 
 static int __init db1xxx_dev_init(void)

arch/mips/alchemy/devboards/pb1000/board_setup.c

@@ -186,7 +186,7 @@ void __init board_setup(void)
 
 static int __init pb1000_init_irq(void)
 {
-	set_irq_type(AU1000_GPIO_15, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1000_GPIO15_INT, IRQF_TRIGGER_LOW);
 	return 0;
 }
 arch_initcall(pb1000_init_irq);

arch/mips/alchemy/devboards/pb1100/board_setup.c

@@ -147,10 +147,10 @@ void __init board_setup(void)
 
 static int __init pb1100_init_irq(void)
 {
-	set_irq_type(AU1000_GPIO_9,  IRQF_TRIGGER_LOW);	/* PCCD# */
-	set_irq_type(AU1000_GPIO_10, IRQF_TRIGGER_LOW); /* PCSTSCHG# */
-	set_irq_type(AU1000_GPIO_11, IRQF_TRIGGER_LOW); /* PCCard# */
-	set_irq_type(AU1000_GPIO_13, IRQF_TRIGGER_LOW); /* DC_IRQ# */
+	set_irq_type(AU1100_GPIO9_INT,  IRQF_TRIGGER_LOW); /* PCCD# */
+	set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */
+	set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */
+	set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */
 
 	return 0;
 }

arch/mips/alchemy/devboards/pb1100/platform.c

@@ -33,9 +33,9 @@ static int __init pb1100_dev_init(void)
 				    PCMCIA_MEM_PSEUDO_PHYS  + 0x00040000 - 1,
 				    PCMCIA_IO_PSEUDO_PHYS,
 				    PCMCIA_IO_PSEUDO_PHYS   + 0x00001000 - 1,
-				    AU1000_GPIO_11,	 /* card */
-				    AU1000_GPIO_9,	 /* insert */
-				    /*AU1000_GPIO_10*/0, /* stschg */
+				    AU1100_GPIO11_INT,	 /* card */
+				    AU1100_GPIO9_INT,	 /* insert */
+				    /*AU1100_GPIO10_INT*/0, /* stschg */
 				    0,			 /* eject */
 				    0);			 /* id */
 	return 0;

arch/mips/alchemy/devboards/pb1200/board_setup.c

@@ -171,8 +171,8 @@ static int __init pb1200_init_irq(void)
 	}
 #endif
 
-	set_irq_type(AU1000_GPIO_7, IRQF_TRIGGER_LOW);
-	bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1000_GPIO_7);
+	set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
+	bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT);
 
 	return 0;
 }

arch/mips/alchemy/devboards/pb1500/board_setup.c

@@ -35,8 +35,8 @@
 
 
 char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, INTA, INTX, INTX, INTX },   /* IDSEL 12 - HPT370	*/
-	[13] = { -1, INTA, INTB, INTC, INTD },   /* IDSEL 13 - PCI slot */
+	[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff },   /* IDSEL 12 - HPT370	*/
+	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD },   /* IDSEL 13 - PCI slot */
 };
 
 
@@ -155,14 +155,14 @@ void __init board_setup(void)
 
 static int __init pb1500_init_irq(void)
 {
-	set_irq_type(AU1000_GPIO_9, IRQF_TRIGGER_LOW);	/* CD0# */
-	set_irq_type(AU1000_GPIO_10, IRQF_TRIGGER_LOW);	/* CARD0 */
-	set_irq_type(AU1000_GPIO_11, IRQF_TRIGGER_LOW);	/* STSCHG0# */
-	set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH);
-	set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW);
-	set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW);
-	set_irq_type(AU1500_GPIO_203, IRQF_TRIGGER_LOW);
-	set_irq_type(AU1500_GPIO_205, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW);   /* CD0# */
+	set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW);  /* CARD0 */
+	set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW);  /* STSCHG0# */
+	set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
+	set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
 
 	return 0;
 }

arch/mips/alchemy/devboards/pb1500/platform.c

@@ -32,9 +32,9 @@ static int __init pb1500_dev_init(void)
 				    PCMCIA_MEM_PSEUDO_PHYS  + 0x00040000 - 1,
 				    PCMCIA_IO_PSEUDO_PHYS,
 				    PCMCIA_IO_PSEUDO_PHYS   + 0x00001000 - 1,
-				    AU1000_GPIO_11,	 /* card */
-				    AU1000_GPIO_9,	 /* insert */
-				    /*AU1000_GPIO_10*/0, /* stschg */
+				    AU1500_GPIO11_INT,	 /* card */
+				    AU1500_GPIO9_INT,	 /* insert */
+				    /*AU1500_GPIO10_INT*/0, /* stschg */
 				    0,			 /* eject */
 				    0);			 /* id */
 	return 0;

arch/mips/alchemy/devboards/pb1550/board_setup.c

@@ -39,8 +39,8 @@
 
 
 char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left)  */
-	[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
+	[12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left)  */
+	[13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
 };
 
 const char *get_system_type(void)
@@ -89,9 +89,9 @@ void __init board_setup(void)
 
 static int __init pb1550_init_irq(void)
 {
-	set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW);
-	set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW);
-	set_irq_type(AU1500_GPIO_201_205, IRQF_TRIGGER_HIGH);
+	set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH);
 
 	/* enable both PCMCIA card irqs in the shared line */
 	alchemy_gpio2_enable_int(201);

arch/mips/alchemy/devboards/pb1550/platform.c

@@ -40,8 +40,8 @@ static int __init pb1550_dev_init(void)
 				    PCMCIA_MEM_PSEUDO_PHYS  + 0x00040000 - 1,
 				    PCMCIA_IO_PSEUDO_PHYS,
 				    PCMCIA_IO_PSEUDO_PHYS   + 0x00001000 - 1,
-				    AU1500_GPIO_201_205,
-				    AU1000_GPIO_0,
+				    AU1550_GPIO201_205_INT,
+				    AU1550_GPIO0_INT,
 				    0,
 				    0,
 				    0);
@@ -52,8 +52,8 @@ static int __init pb1550_dev_init(void)
 				    PCMCIA_MEM_PSEUDO_PHYS  + 0x00840000 - 1,
 				    PCMCIA_IO_PSEUDO_PHYS   + 0x00800000,
 				    PCMCIA_IO_PSEUDO_PHYS   + 0x00801000 - 1,
-				    AU1500_GPIO_201_205,
-				    AU1000_GPIO_1,
+				    AU1550_GPIO201_205_INT,
+				    AU1550_GPIO1_INT,
 				    0,
 				    0,
 				    1);

arch/mips/alchemy/mtx-1/board_setup.c

@@ -37,14 +37,14 @@
 #include <prom.h>
 
 char irq_tab_alchemy[][5] __initdata = {
-	[0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
-	[1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
-	[2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
-	[3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
-	[4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
-	[5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
-	[6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
-	[7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+	[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
+	[1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+	[2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
+	[3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+	[4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
+	[5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+	[6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
+	[7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
 };
 
 extern int (*board_pci_idsel)(unsigned int devsel, int assert);
@@ -124,11 +124,11 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
 
 static int __init mtx1_init_irq(void)
 {
-	set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH);
-	set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW);
-	set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW);
-	set_irq_type(AU1500_GPIO_203, IRQF_TRIGGER_LOW);
-	set_irq_type(AU1500_GPIO_205, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
+	set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
 
 	return 0;
 }

arch/mips/alchemy/xxs1500/board_setup.c

@@ -80,19 +80,19 @@ void __init board_setup(void)
 
 static int __init xxs1500_init_irq(void)
 {
-	set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH);
-	set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW);
-	set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW);
-	set_irq_type(AU1500_GPIO_203, IRQF_TRIGGER_LOW);
-	set_irq_type(AU1500_GPIO_205, IRQF_TRIGGER_LOW);
-	set_irq_type(AU1500_GPIO_207, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
+	set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO207_INT, IRQF_TRIGGER_LOW);
 
-	set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW);
-	set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW);
-	set_irq_type(AU1000_GPIO_2, IRQF_TRIGGER_LOW);
-	set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW);
-	set_irq_type(AU1000_GPIO_4, IRQF_TRIGGER_LOW); /* CF interrupt */
-	set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* CF irq */
+	set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW);
 
 	return 0;
 }

arch/mips/include/asm/mach-au1x00/gpio-au1000.h

@@ -35,15 +35,13 @@ static inline int au1000_gpio2_to_irq(int gpio)
 	return -ENXIO;
 }
 
-#ifdef CONFIG_SOC_AU1000
 static inline int au1000_irq_to_gpio(int irq)
 {
-	if ((irq >= AU1000_GPIO_0) && (irq <= AU1000_GPIO_31))
-		return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
+	if ((irq >= AU1000_GPIO0_INT) && (irq <= AU1000_GPIO31_INT))
+		return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO0_INT) + 0;
 
 	return -ENXIO;
 }
-#endif
 
 static inline int au1500_gpio1_to_irq(int gpio)
 {
@@ -71,27 +69,25 @@ static inline int au1500_gpio2_to_irq(int gpio)
 	return -ENXIO;
 }
 
-#ifdef CONFIG_SOC_AU1500
 static inline int au1500_irq_to_gpio(int irq)
 {
 	switch (irq) {
-	case AU1000_GPIO_0 ... AU1000_GPIO_15:
-	case AU1500_GPIO_20:
-	case AU1500_GPIO_23 ... AU1500_GPIO_28:
-		return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
-	case AU1500_GPIO_200 ... AU1500_GPIO_203:
-		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_200) + 0;
-	case AU1500_GPIO_204 ... AU1500_GPIO_205:
-		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_204) + 4;
-	case AU1500_GPIO_206 ... AU1500_GPIO_207:
-		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_206) + 6;
-	case AU1500_GPIO_208_215:
+	case AU1500_GPIO0_INT ... AU1500_GPIO15_INT:
+	case AU1500_GPIO20_INT:
+	case AU1500_GPIO23_INT ... AU1500_GPIO28_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO0_INT) + 0;
+	case AU1500_GPIO200_INT ... AU1500_GPIO203_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO200_INT) + 0;
+	case AU1500_GPIO204_INT ... AU1500_GPIO205_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO204_INT) + 4;
+	case AU1500_GPIO206_INT ... AU1500_GPIO207_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO206_INT) + 6;
+	case AU1500_GPIO208_215_INT:
 		return ALCHEMY_GPIO2_BASE + 8;
 	}
 
 	return -ENXIO;
 }
-#endif
 
 static inline int au1100_gpio1_to_irq(int gpio)
 {
@@ -108,19 +104,17 @@ static inline int au1100_gpio2_to_irq(int gpio)
 	return -ENXIO;
 }
 
-#ifdef CONFIG_SOC_AU1100
 static inline int au1100_irq_to_gpio(int irq)
 {
 	switch (irq) {
-	case AU1000_GPIO_0 ... AU1000_GPIO_31:
-		return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
-	case AU1100_GPIO_208_215:
+	case AU1100_GPIO0_INT ... AU1100_GPIO31_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1100_GPIO0_INT) + 0;
+	case AU1100_GPIO208_215_INT:
 		return ALCHEMY_GPIO2_BASE + 8;
 	}
 
 	return -ENXIO;
 }
-#endif
 
 static inline int au1550_gpio1_to_irq(int gpio)
 {
@@ -149,24 +143,22 @@ static inline int au1550_gpio2_to_irq(int gpio)
 	return -ENXIO;
 }
 
-#ifdef CONFIG_SOC_AU1550
 static inline int au1550_irq_to_gpio(int irq)
 {
 	switch (irq) {
-	case AU1000_GPIO_0 ... AU1000_GPIO_15:
-		return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
-	case AU1550_GPIO_200:
-	case AU1500_GPIO_201_205:
-		return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO_200) + 0;
-	case AU1500_GPIO_16 ... AU1500_GPIO_28:
-		return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO_16) + 16;
-	case AU1500_GPIO_206 ... AU1500_GPIO_208_218:
-		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_206) + 6;
+	case AU1550_GPIO0_INT ... AU1550_GPIO15_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO0_INT) + 0;
+	case AU1550_GPIO200_INT:
+	case AU1550_GPIO201_205_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO200_INT) + 0;
+	case AU1550_GPIO16_INT ... AU1550_GPIO28_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO16_INT) + 16;
+	case AU1550_GPIO206_INT ... AU1550_GPIO208_215_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO206_INT) + 6;
 	}
 
 	return -ENXIO;
 }
-#endif
 
 static inline int au1200_gpio1_to_irq(int gpio)
 {
@@ -187,23 +179,21 @@ static inline int au1200_gpio2_to_irq(int gpio)
 	return -ENXIO;
 }
 
-#ifdef CONFIG_SOC_AU1200
 static inline int au1200_irq_to_gpio(int irq)
 {
 	switch (irq) {
-	case AU1000_GPIO_0 ... AU1000_GPIO_31:
-		return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
-	case AU1200_GPIO_200 ... AU1200_GPIO_202:
-		return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO_200) + 0;
-	case AU1200_GPIO_203:
+	case AU1200_GPIO0_INT ... AU1200_GPIO31_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1200_GPIO0_INT) + 0;
+	case AU1200_GPIO200_INT ... AU1200_GPIO202_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO200_INT) + 0;
+	case AU1200_GPIO203_INT:
 		return ALCHEMY_GPIO2_BASE + 3;
-	case AU1200_GPIO_204 ... AU1200_GPIO_208_215:
-		return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO_204) + 4;
+	case AU1200_GPIO204_INT ... AU1200_GPIO208_215_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO204_INT) + 4;
 	}
 
 	return -ENXIO;
 }
-#endif
 
 /*
  * GPIO1 block macros for common linux gpio functions.