Commit 78923e8a authored by Guofeng Yue's avatar Guofeng Yue Committed by David S. Miller

net: amd: Switch and case should be at the same indent

Cleaning some static warnings of indent.
Signed-off-by: default avatarGuofeng Yue <yueguofeng@hisilicon.com>
Signed-off-by: default avatarHaoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 7c13f442
......@@ -185,24 +185,23 @@ static void amd8111e_set_ext_phy(struct net_device *dev)
advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE);
tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
switch (lp->ext_phy_option) {
default:
case SPEED_AUTONEG: /* advertise all values */
tmp |= (ADVERTISE_10HALF | ADVERTISE_10FULL |
ADVERTISE_100HALF | ADVERTISE_100FULL);
break;
case SPEED10_HALF:
tmp |= ADVERTISE_10HALF;
break;
case SPEED10_FULL:
tmp |= ADVERTISE_10FULL;
break;
case SPEED100_HALF:
tmp |= ADVERTISE_100HALF;
break;
case SPEED100_FULL:
tmp |= ADVERTISE_100FULL;
break;
default:
case SPEED_AUTONEG: /* advertise all values */
tmp |= (ADVERTISE_10HALF | ADVERTISE_10FULL |
ADVERTISE_100HALF | ADVERTISE_100FULL);
break;
case SPEED10_HALF:
tmp |= ADVERTISE_10HALF;
break;
case SPEED10_FULL:
tmp |= ADVERTISE_10FULL;
break;
case SPEED100_HALF:
tmp |= ADVERTISE_100HALF;
break;
case SPEED100_FULL:
tmp |= ADVERTISE_100FULL;
break;
}
if(advert != tmp)
......
......@@ -581,15 +581,15 @@ static unsigned long __init lance_probe1( struct net_device *dev,
/* Get the ethernet address */
switch( lp->cardtype ) {
case OLD_RIEBL:
case OLD_RIEBL:
/* No ethernet address! (Set some default address) */
eth_hw_addr_set(dev, OldRieblDefHwaddr);
break;
case NEW_RIEBL:
case NEW_RIEBL:
lp->memcpy_f(addr, RIEBL_HWADDR_ADDR, ETH_ALEN);
eth_hw_addr_set(dev, addr);
break;
case PAM_CARD:
case PAM_CARD:
i = IO->eeprom;
for( i = 0; i < 6; ++i )
addr[i] =
......
......@@ -485,10 +485,10 @@ static int mace_read(mace_private *lp, unsigned int ioaddr, int reg)
unsigned long flags;
switch (reg >> 4) {
case 0: /* register 0-15 */
case 0: /* register 0-15 */
data = inb(ioaddr + AM2150_MACE_BASE + reg);
break;
case 1: /* register 16-31 */
case 1: /* register 16-31 */
spin_lock_irqsave(&lp->bank_lock, flags);
MACEBANK(1);
data = inb(ioaddr + AM2150_MACE_BASE + (reg & 0x0F));
......@@ -512,10 +512,10 @@ static void mace_write(mace_private *lp, unsigned int ioaddr, int reg,
unsigned long flags;
switch (reg >> 4) {
case 0: /* register 0-15 */
case 0: /* register 0-15 */
outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + reg);
break;
case 1: /* register 16-31 */
case 1: /* register 16-31 */
spin_lock_irqsave(&lp->bank_lock, flags);
MACEBANK(1);
outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + (reg & 0x0F));
......@@ -567,13 +567,13 @@ static int mace_init(mace_private *lp, unsigned int ioaddr,
* Or just set ASEL in PHYCC below!
*/
switch (if_port) {
case 1:
case 1:
mace_write(lp, ioaddr, MACE_PLSCC, 0x02);
break;
case 2:
case 2:
mace_write(lp, ioaddr, MACE_PLSCC, 0x00);
break;
default:
default:
mace_write(lp, ioaddr, MACE_PHYCC, /* ASEL */ 4);
/* ASEL Auto Select. When set, the PORTSEL[1-0] bits are overridden,
and the MACE device will automatically select the operating media
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment