Commit 7892ea23 authored by David S. Miller's avatar David S. Miller

Merge branch 'dsa-Move-padding-into-Broadcom-tagger'

Florian Fainelli says:

====================
net: dsa: Move padding into Broadcom tagger

This patch series moves the padding of short packets to where it belongs
within the DSA Broadcom tagger code, I just found myself doing this for
a third driver, which was a clear indication this was wrong and did not
scale.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 33c30a8b c979da77
......@@ -1216,18 +1216,6 @@ static netdev_tx_t bcm_sysport_xmit(struct sk_buff *skb,
goto out;
}
/* The Ethernet switch we are interfaced with needs packets to be at
* least 64 bytes (including FCS) otherwise they will be discarded when
* they enter the switch port logic. When Broadcom tags are enabled, we
* need to make sure that packets are at least 68 bytes
* (including FCS and tag) because the length verification is done after
* the Broadcom tag is stripped off the ingress packet.
*/
if (skb_put_padto(skb, ETH_ZLEN + ENET_BRCM_TAG_LEN)) {
ret = NETDEV_TX_OK;
goto out;
}
/* Insert TSB and checksum infos */
if (priv->tsb_en) {
skb = bcm_sysport_insert_tsb(skb, dev);
......
......@@ -128,8 +128,6 @@ bgmac_dma_tx_add_buf(struct bgmac *bgmac, struct bgmac_dma_ring *ring,
dma_desc->ctl1 = cpu_to_le32(ctl1);
}
#define ENET_BRCM_TAG_LEN 4
static netdev_tx_t bgmac_dma_tx_add(struct bgmac *bgmac,
struct bgmac_dma_ring *ring,
struct sk_buff *skb)
......@@ -142,18 +140,6 @@ static netdev_tx_t bgmac_dma_tx_add(struct bgmac *bgmac,
u32 flags;
int i;
/* The Ethernet switch we are interfaced with needs packets to be at
* least 64 bytes (including FCS) otherwise they will be discarded when
* they enter the switch port logic. When Broadcom tags are enabled, we
* need to make sure that packets are at least 68 bytes
* (including FCS and tag) because the length verification is done after
* the Broadcom tag is stripped off the ingress packet.
*/
if (netdev_uses_dsa(net_dev)) {
if (skb_put_padto(skb, ETH_ZLEN + ENET_BRCM_TAG_LEN))
goto err_stats;
}
if (skb->len > BGMAC_DESC_CTL1_LEN) {
netdev_err(bgmac->net_dev, "Too long skb (%d)\n", skb->len);
goto err_drop;
......@@ -240,7 +226,6 @@ static netdev_tx_t bgmac_dma_tx_add(struct bgmac *bgmac,
err_drop:
dev_kfree_skb(skb);
err_stats:
net_dev->stats.tx_dropped++;
net_dev->stats.tx_errors++;
return NETDEV_TX_OK;
......
......@@ -70,6 +70,18 @@ static struct sk_buff *brcm_tag_xmit_ll(struct sk_buff *skb,
if (skb_cow_head(skb, BRCM_TAG_LEN) < 0)
return NULL;
/* The Ethernet switch we are interfaced with needs packets to be at
* least 64 bytes (including FCS) otherwise they will be discarded when
* they enter the switch port logic. When Broadcom tags are enabled, we
* need to make sure that packets are at least 68 bytes
* (including FCS and tag) because the length verification is done after
* the Broadcom tag is stripped off the ingress packet.
*
* Let dsa_slave_xmit() free the SKB
*/
if (__skb_put_padto(skb, ETH_ZLEN + BRCM_TAG_LEN, false))
return NULL;
skb_push(skb, BRCM_TAG_LEN);
if (offset)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment