Commit 78eb9094 authored by Shengzhou Liu's avatar Shengzhou Liu Committed by Scott Wood

powerpc/t2080rdb: Add T2080RDB board support

T2080PCIe-RDB is a Freescale Reference Design Board that hosts T2080 SoC.
The board feature overview:
Processor:
 - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
DDR Memory:
 - Single memory controller capable of supporting DDR3 and DDR3-LP devices
 - 72bit 4GB DDR3-LP SODIMM in slot
Ethernet interfaces:
 - Two 1Gbps RGMII ports on-board
 - Two 10Gbps SFP+ ports on-board
 - Two 10Gbps Base-T ports on-board
Accelerator:
 - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
IFC/Local Bus
 - NOR:  128MB 16-bit NOR flash
 - NAND: 1GB 8-bit NAND flash
 - CPLD: for system controlling with programable header on-board
eSPI:
 - 64MB N25Q512 SPI flash
USB:
 - Two USB2.0 ports with internal PHY (both Type-A)
PCIe:
 - One PCIe x4 goldfinger(support SR-IOV)
 - One PCIe x4 slot
 - One PCIe x2 end-point device (C293 crypto co-processor)
SATA:
 - Two SATA 2.0 ports on-board
SDHC:
 - support a MicroSD/TF card on-board
I2C:
 - Four I2C controllers.
UART:
 - Dual 4-pins UART serial ports
Signed-off-by: default avatarShengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: default avatarScott Wood <scottwood@freescale.com>
parent dd2b04fc
/*
* T2080PCIe-RDB Board Device Tree Source
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/t208xsi-pre.dtsi"
/include/ "t208xrdb.dtsi"
/ {
model = "fsl,T2080RDB";
compatible = "fsl,T2080RDB";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
rio: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x11000>;
port1 {
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
};
port2 {
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
};
};
};
/include/ "fsl/t2080si-post.dtsi"
/*
* T2080PCIe-RDB Board Device Tree Source
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/ {
model = "fsl,T2080RDB";
compatible = "fsl,T2080RDB";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xff800000 0x00010000
3 0 0xf 0xffdf0000 0x00008000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
boardctrl: board-control@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,t2080-cpld";
reg = <3 0 0x300>;
ranges = <0 3 0 0x300>;
};
};
memory {
device_type = "memory";
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q512a";
reg = <0>;
spi-max-frequency = <10000000>; /* input clock */
};
};
i2c@118000 {
adt7481@4c {
compatible = "adi,adt7481";
reg = <0x4c>;
};
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
interrupts = <0x1 0x1 0 0>;
};
eeprom@50 {
compatible = "atmel,24c256";
reg = <0x50>;
};
};
i2c@118100 {
pca9546@77 {
compatible = "nxp,pca9546";
reg = <0x77>;
};
};
sdhc@114000 {
voltage-ranges = <1800 1800 3300 3300>;
};
};
pci0: pcie@ffe240000 {
reg = <0xf 0xfe240000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci1: pcie@ffe250000 {
reg = <0xf 0xfe250000 0 0x10000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci2: pcie@ffe260000 {
reg = <0xf 0xfe260000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci3: pcie@ffe270000 {
reg = <0xf 0xfe270000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
};
......@@ -274,7 +274,7 @@ config CORENET_GENERIC
For 32bit kernel, the following boards are supported:
P2041 RDB, P3041 DS, P4080 DS, kmcoge4, and OCA4080
For 64bit kernel, the following boards are supported:
T208x QDS, T4240 QDS/RDB and B4 QDS
T208x QDS/RDB, T4240 QDS/RDB and B4 QDS
The following boards are supported for both 32bit and 64bit kernel:
P5020 DS, P5040 DS and T104xQDS
......
......@@ -120,6 +120,7 @@ static const char * const boards[] __initconst = {
"fsl,P5020DS",
"fsl,P5040DS",
"fsl,T2080QDS",
"fsl,T2080RDB",
"fsl,T2081QDS",
"fsl,T4240QDS",
"fsl,T4240RDB",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment