ARM: dts: sun8i: Add Reduced Serial Bus controller device node to A23/A33 dtsi

This patch adds a device node for the Reduced Serial Bus (RSB)
controller and the defacto pinmux setting to the A23/A33 dtsi.

Since there is only one possible pinmux setting for RSB, just
set it in the dtsi.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -651,6 +651,13 @@ r_pio: pinctrl@01f02c00 {
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
+			r_rsb_pins: r_rsb {
+				allwinner,pins = "PL0", "PL1";
+				allwinner,function = "s_rsb";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
 			r_uart_pins_a: r_uart@0 {
 				allwinner,pins = "PL2", "PL3";
 				allwinner,function = "s_uart";
@@ -658,5 +665,19 @@ r_uart_pins_a: r_uart@0 {
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
+
+		r_rsb: rsb@01f03400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apb0_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 	};
 };