net/mlx5e: Trigger NAPI after activating an SQ

If an SQ is deactivated and reactivated again, some packets could be
sent after MLX5E_SQ_STATE_ENABLED is cleared, but before
netif_tx_stop_queue, meaning that NAPI might miss some completions. In
order to handle them, make sure to trigger NAPI after SQ activation in
all cases where it can be relevant. Regular SQs, XDP SQs and XSK SQs are
good. Missing cases added: after recovery, after activating HTB SQs and
after activating PTP SQs.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

drivers/net/ethernet/mellanox/mlx5/core/en.h

@@ -454,6 +454,7 @@ struct mlx5e_txqsq {
 	struct mlx5_clock         *clock;
 	struct net_device         *netdev;
 	struct mlx5_core_dev      *mdev;
+	struct mlx5e_channel      *channel;
 	struct mlx5e_priv         *priv;
 
 	/* control path */

drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c

@@ -771,8 +771,8 @@ void mlx5e_ptp_activate_channel(struct mlx5e_ptp *c)
 	if (test_bit(MLX5E_PTP_STATE_RX, c->state)) {
 		mlx5e_ptp_rx_set_fs(c->priv);
 		mlx5e_activate_rq(&c->rq);
-		mlx5e_trigger_napi_sched(&c->napi);
 	}
+	mlx5e_trigger_napi_sched(&c->napi);
 }
 
 void mlx5e_ptp_deactivate_channel(struct mlx5e_ptp *c)

drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c

@@ -81,6 +81,10 @@ static int mlx5e_tx_reporter_err_cqe_recover(void *ctx)
 	sq->stats->recover++;
 	clear_bit(MLX5E_SQ_STATE_RECOVERING, &sq->state);
 	mlx5e_activate_txqsq(sq);
+	if (sq->channel)
+		mlx5e_trigger_napi_icosq(sq->channel);
+	else
+		mlx5e_trigger_napi_sched(sq->cq.napi);
 
 	return 0;
 out:

drivers/net/ethernet/mellanox/mlx5/core/en_main.c

@@ -1470,6 +1470,7 @@ static int mlx5e_alloc_txqsq(struct mlx5e_channel *c,
 	sq->mkey_be   = c->mkey_be;
 	sq->netdev    = c->netdev;
 	sq->mdev      = c->mdev;
+	sq->channel   = c;
 	sq->priv      = c->priv;
 	sq->ch_ix     = c->ix;
 	sq->txq_ix    = txq_ix;
@@ -2482,8 +2483,6 @@ static void mlx5e_activate_channel(struct mlx5e_channel *c)
 		mlx5e_activate_xsk(c);
 	else
 		mlx5e_activate_rq(&c->rq);
-
-	mlx5e_trigger_napi_icosq(c);
 }
 
 static void mlx5e_deactivate_channel(struct mlx5e_channel *c)
@@ -2575,13 +2574,19 @@ int mlx5e_open_channels(struct mlx5e_priv *priv,
 	return err;
 }
 
-static void mlx5e_activate_channels(struct mlx5e_channels *chs)
+static void mlx5e_activate_channels(struct mlx5e_priv *priv, struct mlx5e_channels *chs)
 {
 	int i;
 
 	for (i = 0; i < chs->num; i++)
 		mlx5e_activate_channel(chs->c[i]);
 
+	if (priv->htb)
+		mlx5e_qos_activate_queues(priv);
+
+	for (i = 0; i < chs->num; i++)
+		mlx5e_trigger_napi_icosq(chs->c[i]);
+
 	if (chs->ptp)
 		mlx5e_ptp_activate_channel(chs->ptp);
 }
@@ -2888,9 +2893,7 @@ static void mlx5e_build_txq_maps(struct mlx5e_priv *priv)
 void mlx5e_activate_priv_channels(struct mlx5e_priv *priv)
 {
 	mlx5e_build_txq_maps(priv);
-	mlx5e_activate_channels(&priv->channels);
-	if (priv->htb)
-		mlx5e_qos_activate_queues(priv);
+	mlx5e_activate_channels(priv, &priv->channels);
 	mlx5e_xdp_tx_enable(priv);
 
 	/* dev_watchdog() wants all TX queues to be started when the carrier is