Merge branch 'hns3-fixes'

Huazhong Tan says:

====================
net: hns3: fixes for -net

There are some bugfixes for the HNS3 ethernet driver. patch#1 fixes
a desc filling bug, patch#2 fixes a false TX timeout issue, and
patch#3~#5 fixes some bugs related to VLAN and FD.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns3/hns3_enet.c

@@ -1093,16 +1093,8 @@ static int hns3_fill_desc(struct hns3_enet_ring *ring, void *priv,
 	int k, sizeoflast;
 	dma_addr_t dma;
 
-	if (type == DESC_TYPE_SKB) {
-		struct sk_buff *skb = (struct sk_buff *)priv;
-		int ret;
-
-		ret = hns3_fill_skb_desc(ring, skb, desc);
-		if (unlikely(ret < 0))
-			return ret;
-
-		dma = dma_map_single(dev, skb->data, size, DMA_TO_DEVICE);
-	} else if (type == DESC_TYPE_FRAGLIST_SKB) {
+	if (type == DESC_TYPE_FRAGLIST_SKB ||
+	    type == DESC_TYPE_SKB) {
 		struct sk_buff *skb = (struct sk_buff *)priv;
 
 		dma = dma_map_single(dev, skb->data, size, DMA_TO_DEVICE);
@@ -1439,6 +1431,10 @@ netdev_tx_t hns3_nic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
 
 	next_to_use_head = ring->next_to_use;
 
+	ret = hns3_fill_skb_desc(ring, skb, &ring->desc[ring->next_to_use]);
+	if (unlikely(ret < 0))
+		goto fill_err;
+
 	ret = hns3_fill_skb_to_desc(ring, skb, DESC_TYPE_SKB);
 	if (unlikely(ret < 0))
 		goto fill_err;
@@ -4140,8 +4136,8 @@ static void hns3_link_status_change(struct hnae3_handle *handle, bool linkup)
 		return;
 
 	if (linkup) {
-		netif_carrier_on(netdev);
 		netif_tx_wake_all_queues(netdev);
+		netif_carrier_on(netdev);
 		if (netif_msg_link(handle))
 			netdev_info(netdev, "link up\n");
 	} else {

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c

@@ -5806,9 +5806,9 @@ static int hclge_add_fd_entry(struct hnae3_handle *handle,
 	/* to avoid rule conflict, when user configure rule by ethtool,
 	 * we need to clear all arfs rules
 	 */
+	spin_lock_bh(&hdev->fd_rule_lock);
 	hclge_clear_arfs_rules(handle);
 
-	spin_lock_bh(&hdev->fd_rule_lock);
 	ret = hclge_fd_config_rule(hdev, rule);
 
 	spin_unlock_bh(&hdev->fd_rule_lock);
@@ -5851,6 +5851,7 @@ static int hclge_del_fd_entry(struct hnae3_handle *handle,
 	return ret;
 }
 
+/* make sure being called after lock up with fd_rule_lock */
 static void hclge_del_all_fd_entries(struct hnae3_handle *handle,
 				     bool clear_list)
 {
@@ -5863,7 +5864,6 @@ static void hclge_del_all_fd_entries(struct hnae3_handle *handle,
 	if (!hnae3_dev_fd_supported(hdev))
 		return;
 
-	spin_lock_bh(&hdev->fd_rule_lock);
 	for_each_set_bit(location, hdev->fd_bmap,
 			 hdev->fd_cfg.rule_num[HCLGE_FD_STAGE_1])
 		hclge_fd_tcam_config(hdev, HCLGE_FD_STAGE_1, true, location,
@@ -5880,8 +5880,6 @@ static void hclge_del_all_fd_entries(struct hnae3_handle *handle,
 		bitmap_zero(hdev->fd_bmap,
 			    hdev->fd_cfg.rule_num[HCLGE_FD_STAGE_1]);
 	}
-
-	spin_unlock_bh(&hdev->fd_rule_lock);
 }
 
 static int hclge_restore_fd_entries(struct hnae3_handle *handle)
@@ -6263,7 +6261,7 @@ static int hclge_add_fd_entry_by_arfs(struct hnae3_handle *handle, u16 queue_id,
 				      u16 flow_id, struct flow_keys *fkeys)
 {
 	struct hclge_vport *vport = hclge_get_vport(handle);
-	struct hclge_fd_rule_tuples new_tuples;
+	struct hclge_fd_rule_tuples new_tuples = {};
 	struct hclge_dev *hdev = vport->back;
 	struct hclge_fd_rule *rule;
 	u16 tmp_queue_id;
@@ -6273,19 +6271,17 @@ static int hclge_add_fd_entry_by_arfs(struct hnae3_handle *handle, u16 queue_id,
 	if (!hnae3_dev_fd_supported(hdev))
 		return -EOPNOTSUPP;
 
-	memset(&new_tuples, 0, sizeof(new_tuples));
-	hclge_fd_get_flow_tuples(fkeys, &new_tuples);
-
-	spin_lock_bh(&hdev->fd_rule_lock);
-
 	/* when there is already fd rule existed add by user,
 	 * arfs should not work
 	 */
+	spin_lock_bh(&hdev->fd_rule_lock);
 	if (hdev->fd_active_type == HCLGE_FD_EP_ACTIVE) {
 		spin_unlock_bh(&hdev->fd_rule_lock);
 		return -EOPNOTSUPP;
 	}
 
+	hclge_fd_get_flow_tuples(fkeys, &new_tuples);
+
 	/* check is there flow director filter existed for this flow,
 	 * if not, create a new filter for it;
 	 * if filter exist with different queue id, modify the filter;
@@ -6368,6 +6364,7 @@ static void hclge_rfs_filter_expire(struct hclge_dev *hdev)
 #endif
 }
 
+/* make sure being called after lock up with fd_rule_lock */
 static void hclge_clear_arfs_rules(struct hnae3_handle *handle)
 {
 #ifdef CONFIG_RFS_ACCEL
@@ -6420,10 +6417,14 @@ static void hclge_enable_fd(struct hnae3_handle *handle, bool enable)
 
 	hdev->fd_en = enable;
 	clear = hdev->fd_active_type == HCLGE_FD_ARFS_ACTIVE;
-	if (!enable)
+
+	if (!enable) {
+		spin_lock_bh(&hdev->fd_rule_lock);
 		hclge_del_all_fd_entries(handle, clear);
-	else
+		spin_unlock_bh(&hdev->fd_rule_lock);
+	} else {
 		hclge_restore_fd_entries(handle);
+	}
 }
 
 static void hclge_cfg_mac_mode(struct hclge_dev *hdev, bool enable)
@@ -6886,8 +6887,9 @@ static void hclge_ae_stop(struct hnae3_handle *handle)
 	int i;
 
 	set_bit(HCLGE_STATE_DOWN, &hdev->state);
-
+	spin_lock_bh(&hdev->fd_rule_lock);
 	hclge_clear_arfs_rules(handle);
+	spin_unlock_bh(&hdev->fd_rule_lock);
 
 	/* If it is not PF reset, the firmware will disable the MAC,
 	 * so it only need to stop phy here.
@@ -9040,11 +9042,12 @@ int hclge_set_vlan_filter(struct hnae3_handle *handle, __be16 proto,
 	bool writen_to_tbl = false;
 	int ret = 0;
 
-	/* When device is resetting, firmware is unable to handle
-	 * mailbox. Just record the vlan id, and remove it after
+	/* When device is resetting or reset failed, firmware is unable to
+	 * handle mailbox. Just record the vlan id, and remove it after
 	 * reset finished.
 	 */
-	if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state) && is_kill) {
+	if ((test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state) ||
+	     test_bit(HCLGE_STATE_RST_FAIL, &hdev->state)) && is_kill) {
 		set_bit(vlan_id, vport->vlan_del_fail_bmap);
 		return -EBUSY;
 	}

drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c

@@ -1592,11 +1592,12 @@ static int hclgevf_set_vlan_filter(struct hnae3_handle *handle,
 	if (proto != htons(ETH_P_8021Q))
 		return -EPROTONOSUPPORT;
 
-	/* When device is resetting, firmware is unable to handle
-	 * mailbox. Just record the vlan id, and remove it after
+	/* When device is resetting or reset failed, firmware is unable to
+	 * handle mailbox. Just record the vlan id, and remove it after
 	 * reset finished.
 	 */
-	if (test_bit(HCLGEVF_STATE_RST_HANDLING, &hdev->state) && is_kill) {
+	if ((test_bit(HCLGEVF_STATE_RST_HANDLING, &hdev->state) ||
+	     test_bit(HCLGEVF_STATE_RST_FAIL, &hdev->state)) && is_kill) {
 		set_bit(vlan_id, hdev->vlan_del_fail_bmap);
 		return -EBUSY;
 	}
@@ -3439,23 +3440,36 @@ void hclgevf_update_port_base_vlan_info(struct hclgevf_dev *hdev, u16 state,
 {
 	struct hnae3_handle *nic = &hdev->nic;
 	struct hclge_vf_to_pf_msg send_msg;
+	int ret;
 
 	rtnl_lock();
-	hclgevf_notify_client(hdev, HNAE3_DOWN_CLIENT);
-	rtnl_unlock();
+
+	if (test_bit(HCLGEVF_STATE_RST_HANDLING, &hdev->state) ||
+	    test_bit(HCLGEVF_STATE_RST_FAIL, &hdev->state)) {
+		dev_warn(&hdev->pdev->dev,
+			 "is resetting when updating port based vlan info\n");
+		rtnl_unlock();
+		return;
+	}
+
+	ret = hclgevf_notify_client(hdev, HNAE3_DOWN_CLIENT);
+	if (ret) {
+		rtnl_unlock();
+		return;
+	}
 
 	/* send msg to PF and wait update port based vlan info */
 	hclgevf_build_send_msg(&send_msg, HCLGE_MBX_SET_VLAN,
 			       HCLGE_MBX_PORT_BASE_VLAN_CFG);
 	memcpy(send_msg.data, port_base_vlan_info, data_size);
-	hclgevf_send_mbx_msg(hdev, &send_msg, false, NULL, 0);
-
-	if (state == HNAE3_PORT_BASE_VLAN_DISABLE)
-		nic->port_base_vlan_state = HNAE3_PORT_BASE_VLAN_DISABLE;
-	else
-		nic->port_base_vlan_state = HNAE3_PORT_BASE_VLAN_ENABLE;
+	ret = hclgevf_send_mbx_msg(hdev, &send_msg, false, NULL, 0);
+	if (!ret) {
+		if (state == HNAE3_PORT_BASE_VLAN_DISABLE)
+			nic->port_base_vlan_state = state;
+		else
+			nic->port_base_vlan_state = HNAE3_PORT_BASE_VLAN_ENABLE;
+	}
 
-	rtnl_lock();
 	hclgevf_notify_client(hdev, HNAE3_UP_CLIENT);
 	rtnl_unlock();
 }