Commit 7b239307 authored by Fabio Estevam's avatar Fabio Estevam Committed by Shawn Guo

ARM: mach-mx31_3ds: Remove camera support

Since commit c93cc614 ("[media] staging/media: remove deprecated
mx3 driver") the mx3 camera driver has been removed, so remove the camera
support from the board file as well.
Signed-off-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Tested-by: default avatarMagnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 9690e915
......@@ -26,16 +26,12 @@
#include <linux/regulator/machine.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/memblock.h>
#include <media/soc_camera.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
#include "3ds_debugboard.h"
#include "common.h"
......@@ -137,23 +133,6 @@ static int mx31_3ds_pins[] = {
MX31_PIN_HSYNC__HSYNC,
MX31_PIN_FPSHIFT__FPSHIFT,
MX31_PIN_CONTRAST__CONTRAST,
/* CSI */
MX31_PIN_CSI_D6__CSI_D6,
MX31_PIN_CSI_D7__CSI_D7,
MX31_PIN_CSI_D8__CSI_D8,
MX31_PIN_CSI_D9__CSI_D9,
MX31_PIN_CSI_D10__CSI_D10,
MX31_PIN_CSI_D11__CSI_D11,
MX31_PIN_CSI_D12__CSI_D12,
MX31_PIN_CSI_D13__CSI_D13,
MX31_PIN_CSI_D14__CSI_D14,
MX31_PIN_CSI_D15__CSI_D15,
MX31_PIN_CSI_HSYNC__CSI_HSYNC,
MX31_PIN_CSI_MCLK__CSI_MCLK,
MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
MX31_PIN_CSI_VSYNC__CSI_VSYNC,
MX31_PIN_CSI_D5__GPIO3_5, /* CMOS PWDN */
IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_GPIO), /* CMOS reset */
/* SSI */
MX31_PIN_STXD4__STXD4,
MX31_PIN_SRXD4__SRXD4,
......@@ -161,98 +140,6 @@ static int mx31_3ds_pins[] = {
MX31_PIN_SFS4__SFS4,
};
/*
* Camera support
*/
static phys_addr_t mx3_camera_base __initdata;
#define MX31_3DS_CAMERA_BUF_SIZE SZ_8M
#define MX31_3DS_GPIO_CAMERA_PW IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
#define MX31_3DS_GPIO_CAMERA_RST IOMUX_TO_GPIO(MX31_PIN_RI_DTE1)
static struct gpio mx31_3ds_camera_gpios[] = {
{ MX31_3DS_GPIO_CAMERA_PW, GPIOF_OUT_INIT_HIGH, "camera-power" },
{ MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" },
};
static const struct mx3_camera_pdata mx31_3ds_camera_pdata __initconst = {
.flags = MX3_CAMERA_DATAWIDTH_10,
.mclk_10khz = 2600,
};
static int __init mx31_3ds_init_camera(void)
{
int dma, ret = -ENOMEM;
struct platform_device *pdev =
imx31_alloc_mx3_camera(&mx31_3ds_camera_pdata);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
if (!mx3_camera_base)
goto err;
dma = dma_declare_coherent_memory(&pdev->dev,
mx3_camera_base, mx3_camera_base,
MX31_3DS_CAMERA_BUF_SIZE,
DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
if (!(dma & DMA_MEMORY_MAP))
goto err;
ret = platform_device_add(pdev);
if (ret)
err:
platform_device_put(pdev);
return ret;
}
static int mx31_3ds_camera_power(struct device *dev, int on)
{
/* enable or disable the camera */
pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
gpio_set_value(MX31_3DS_GPIO_CAMERA_PW, on ? 0 : 1);
if (!on)
goto out;
/* If enabled, give a reset impulse */
gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 0);
msleep(20);
gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 1);
msleep(100);
out:
return 0;
}
static struct i2c_board_info mx31_3ds_i2c_camera = {
I2C_BOARD_INFO("ov2640", 0x30),
};
static struct regulator_bulk_data mx31_3ds_camera_regs[] = {
{ .supply = "cmos_vcore" },
{ .supply = "cmos_2v8" },
};
static struct soc_camera_link iclink_ov2640 = {
.bus_id = 0,
.board_info = &mx31_3ds_i2c_camera,
.i2c_adapter_id = 0,
.power = mx31_3ds_camera_power,
.regulators = mx31_3ds_camera_regs,
.num_regulators = ARRAY_SIZE(mx31_3ds_camera_regs),
};
static struct platform_device mx31_3ds_ov2640 = {
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
.platform_data = &iclink_ov2640,
},
};
/*
* FB support
*/
......@@ -410,7 +297,6 @@ static struct regulator_init_data vmmc2_init = {
static struct regulator_consumer_supply vmmc1_consumers[] = {
REGULATOR_SUPPLY("vcore", "spi0.0"),
REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"),
};
static struct regulator_init_data vmmc1_init = {
......@@ -441,22 +327,6 @@ static struct regulator_init_data vgen_init = {
.consumer_supplies = vgen_consumers,
};
static struct regulator_consumer_supply vvib_consumers[] = {
REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"),
};
static struct regulator_init_data vvib_init = {
.constraints = {
.min_uV = 1300000,
.max_uV = 1300000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(vvib_consumers),
.consumer_supplies = vvib_consumers,
};
static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
{
.id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
......@@ -480,9 +350,6 @@ static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
}, {
.id = MC13783_REG_VGEN, /* Power LCD */
.init_data = &vgen_init,
}, {
.id = MC13783_REG_VVIB, /* Power CMOS */
.init_data = &vvib_init,
},
};
......@@ -688,10 +555,6 @@ static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = {
.bitrate = 100000,
};
static struct platform_device *devices[] __initdata = {
&mx31_3ds_ov2640,
};
static void __init mx31_3ds_init(void)
{
imx31_soc_init();
......@@ -723,14 +586,10 @@ static void __init mx31_3ds_init(void)
static void __init mx31_3ds_late(void)
{
int ret;
mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(mx31_3ds_spi_devs,
ARRAY_SIZE(mx31_3ds_spi_devs));
platform_add_devices(devices, ARRAY_SIZE(devices));
mx31_3ds_usbotg_init();
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
......@@ -751,17 +610,6 @@ static void __init mx31_3ds_late(void)
"devices on the debug board are unusable.\n");
imx31_add_mxc_mmc(0, &sdhc1_pdata);
/* CSI */
/* Camera power: default - off */
ret = gpio_request_array(mx31_3ds_camera_gpios,
ARRAY_SIZE(mx31_3ds_camera_gpios));
if (ret) {
pr_err("Failed to request camera gpios");
iclink_ov2640.power = NULL;
}
mx31_3ds_init_camera();
}
static void __init mx31_3ds_timer_init(void)
......@@ -769,13 +617,6 @@ static void __init mx31_3ds_timer_init(void)
mx31_clocks_init(26000000);
}
static void __init mx31_3ds_reserve(void)
{
/* reserve MX31_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
mx3_camera_base = arm_memblock_steal(MX31_3DS_CAMERA_BUF_SIZE,
MX31_3DS_CAMERA_BUF_SIZE);
}
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
......@@ -785,6 +626,5 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
.init_time = mx31_3ds_timer_init,
.init_machine = mx31_3ds_init,
.init_late = mx31_3ds_late,
.reserve = mx31_3ds_reserve,
.restart = mxc_restart,
MACHINE_END
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment