Commit 7b4f638b authored by Ben Skeggs's avatar Ben Skeggs

drm/nve0: recognise nvf0 as a kepler board (GK110)

Signed-off-by: default avatarBen Skeggs <bskeggs@redhat.com>
parent 9fe72f9e
......@@ -172,7 +172,8 @@ nouveau_devobj_ctor(struct nouveau_object *parent,
case 0xa0: device->card_type = NV_50; break;
case 0xc0: device->card_type = NV_C0; break;
case 0xd0: device->card_type = NV_D0; break;
case 0xe0: device->card_type = NV_E0; break;
case 0xe0:
case 0xf0: device->card_type = NV_E0; break;
default:
break;
}
......
......@@ -141,6 +141,40 @@ nve0_identify(struct nouveau_device *device)
device->oclass[NVDEV_ENGINE_VP ] = &nve0_vp_oclass;
device->oclass[NVDEV_ENGINE_PPP ] = &nvc0_ppp_oclass;
break;
case 0xf0:
device->cname = "GK110";
device->oclass[NVDEV_SUBDEV_VBIOS ] = &nouveau_bios_oclass;
device->oclass[NVDEV_SUBDEV_GPIO ] = &nve0_gpio_oclass;
device->oclass[NVDEV_SUBDEV_I2C ] = &nvd0_i2c_oclass;
device->oclass[NVDEV_SUBDEV_CLOCK ] = &nvc0_clock_oclass;
device->oclass[NVDEV_SUBDEV_THERM ] = &nvd0_therm_oclass;
device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass;
device->oclass[NVDEV_SUBDEV_DEVINIT] = &nvc0_devinit_oclass;
device->oclass[NVDEV_SUBDEV_MC ] = &nvc0_mc_oclass;
device->oclass[NVDEV_SUBDEV_BUS ] = &nvc0_bus_oclass;
device->oclass[NVDEV_SUBDEV_TIMER ] = &nv04_timer_oclass;
device->oclass[NVDEV_SUBDEV_FB ] = &nvc0_fb_oclass;
device->oclass[NVDEV_SUBDEV_LTCG ] = &nvc0_ltcg_oclass;
device->oclass[NVDEV_SUBDEV_IBUS ] = &nve0_ibus_oclass;
device->oclass[NVDEV_SUBDEV_INSTMEM] = &nv50_instmem_oclass;
device->oclass[NVDEV_SUBDEV_VM ] = &nvc0_vmmgr_oclass;
device->oclass[NVDEV_SUBDEV_BAR ] = &nvc0_bar_oclass;
device->oclass[NVDEV_ENGINE_DMAOBJ ] = &nvd0_dmaeng_oclass;
#if 0
device->oclass[NVDEV_ENGINE_FIFO ] = &nve0_fifo_oclass;
device->oclass[NVDEV_ENGINE_SW ] = &nvc0_software_oclass;
device->oclass[NVDEV_ENGINE_GR ] = &nve0_graph_oclass;
#endif
device->oclass[NVDEV_ENGINE_DISP ] = &nvf0_disp_oclass;
#if 0
device->oclass[NVDEV_ENGINE_COPY0 ] = &nve0_copy0_oclass;
device->oclass[NVDEV_ENGINE_COPY1 ] = &nve0_copy1_oclass;
device->oclass[NVDEV_ENGINE_COPY2 ] = &nve0_copy2_oclass;
device->oclass[NVDEV_ENGINE_BSP ] = &nve0_bsp_oclass;
device->oclass[NVDEV_ENGINE_VP ] = &nve0_vp_oclass;
device->oclass[NVDEV_ENGINE_PPP ] = &nvc0_ppp_oclass;
#endif
break;
default:
nv_fatal(device, "unknown Kepler chipset\n");
return -EINVAL;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment