Merge ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB changes into next/soc

* commit '5c34a4e8':
  ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
  ARM: uniphier: drop code for old DT binding

These cause a harmless conflict with the clps711x multiplatform
support, and it's easy to resolve.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/Kconfig

@@ -327,7 +327,6 @@ choice
 config ARCH_MULTIPLATFORM
 	bool "Allow multiple platforms to be selected"
 	depends on MMU
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_HAS_SG_CHAIN
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR
@@ -342,7 +341,6 @@ config ARCH_MULTIPLATFORM
 config ARM_SINGLE_ARMV7M
 	bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
 	depends on !MMU
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_NVIC
 	select AUTO_ZRELADDR
 	select CLKSRC_OF
@@ -355,10 +353,10 @@ config ARM_SINGLE_ARMV7M
 
 config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select CPU_FA526
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
@@ -379,7 +377,6 @@ config ARCH_EBSA110
 config ARCH_EP93XX
 	bool "EP93xx-based"
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
@@ -388,6 +385,7 @@ config ARCH_EP93XX
 	select CLKSRC_MMIO
 	select CPU_ARM920T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -428,9 +426,9 @@ config ARCH_IOP13XX
 config ARCH_IOP32X
 	bool "IOP32x-based"
 	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
 	select GPIO_IOP
+	select GPIOLIB
 	select NEED_RET_TO_USER
 	select PCI
 	select PLAT_IOP
@@ -441,9 +439,9 @@ config ARCH_IOP32X
 config ARCH_IOP33X
 	bool "IOP33x-based"
 	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
 	select GPIO_IOP
+	select GPIOLIB
 	select NEED_RET_TO_USER
 	select PCI
 	select PLAT_IOP
@@ -454,12 +452,12 @@ config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
 	select CPU_XSCALE
 	select DMABOUNCE if PCI
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MIGHT_HAVE_PCI
 	select NEED_MACH_IO_H
 	select USB_EHCI_BIG_ENDIAN_DESC
@@ -469,9 +467,9 @@ config ARCH_IXP4XX
 
 config ARCH_DOVE
 	bool "Marvell Dove"
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_PJ4
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MIGHT_HAVE_PCI
 	select MULTI_IRQ_HANDLER
 	select MVEBU_MBUS
@@ -485,10 +483,10 @@ config ARCH_DOVE
 
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select CPU_ARM922T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
@@ -496,11 +494,11 @@ config ARCH_KS8695
 
 config ARCH_W90X900
 	bool "Nuvoton W90X900 CPU"
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	help
 	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
 	  At present, the w90x900 has been renamed nuc900, regarding
@@ -512,13 +510,13 @@ config ARCH_W90X900
 
 config ARCH_LPC32XX
 	bool "NXP LPC32XX"
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKDEV_LOOKUP
 	select CLKSRC_LPC32XX
 	select COMMON_CLK
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
@@ -529,7 +527,6 @@ config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_CPU_SUSPEND if PM
 	select AUTO_ZRELADDR
 	select COMMON_CLK
@@ -540,6 +537,7 @@ config ARCH_PXA
 	select CPU_XSCALE if !CPU_XSC3
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
+	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
@@ -570,7 +568,6 @@ config ARCH_RPC
 config ARCH_SA1100
 	bool "SA1100-based"
 	select ARCH_MTD_XIP
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
@@ -579,6 +576,7 @@ config ARCH_SA1100
 	select CPU_FREQ
 	select CPU_SA1100
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select ISA
@@ -590,12 +588,12 @@ config ARCH_SA1100
 
 config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
-	select ARCH_REQUIRE_GPIOLIB
 	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
+	select GPIOLIB
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -611,12 +609,12 @@ config ARCH_S3C24XX
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CPU_ARM926T
 	select GENERIC_ALLOCATOR
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select HAVE_IDE
 	select USE_OF
 	select ZONE_DMA
@@ -628,11 +626,11 @@ config ARCH_OMAP1
 	depends on MMU
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
@@ -854,7 +852,7 @@ source "arch/arm/mach-zynq/Kconfig"
 config ARCH_EFM32
 	bool "Energy Micro efm32"
 	depends on ARM_SINGLE_ARMV7M
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
 	  processors.

arch/arm/mach-at91/Kconfig

 menuconfig ARCH_AT91
 	bool "Atmel SoCs"
 	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select COMMON_CLK_AT91
+	select GPIOLIB
 	select PINCTRL
 	select SOC_BUS
 

arch/arm/mach-bcm/Kconfig

@@ -17,7 +17,7 @@ config ARCH_BCM_IPROC
 	select ARM_GLOBAL_TIMER
 	select COMMON_CLK_IPROC
 	select CLKSRC_MMIO
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ARM_AMBA
 	select PINCTRL
 	help
@@ -80,7 +80,7 @@ comment "KONA architected SoCs"
 
 config ARCH_BCM_MOBILE
 	bool
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 	select ARM_GIC
@@ -145,7 +145,7 @@ comment "Other Architectures"
 config ARCH_BCM2835
 	bool "Broadcom BCM2835 family"
 	depends on ARCH_MULTI_V6 || ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_411920 if ARCH_MULTI_V6
 	select ARM_TIMER_SP804
@@ -184,7 +184,6 @@ config ARCH_BRCMSTB
 	select BRCMSTB_L2_IRQ
 	select BCM7120_L2_IRQ
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select SOC_BRCMSTB
 	select SOC_BUS
 	help

arch/arm/mach-berlin/Kconfig

@@ -2,11 +2,11 @@ menuconfig ARCH_BERLIN
 	bool "Marvell Berlin SoCs"
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC
 	select DW_APB_ICTL
 	select DW_APB_TIMER_OF
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select MFD_SYSCON
 	select PINCTRL
 

arch/arm/mach-digicolor/Kconfig

 config ARCH_DIGICOLOR
 	bool "Conexant Digicolor SoC Support"
 	depends on ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select DIGICOLOR_TIMER
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select MFD_SYSCON
 	select PINCTRL
 	select PINCTRL_DIGICOLOR

arch/arm/mach-exynos/Kconfig

@@ -12,13 +12,13 @@ menuconfig ARCH_EXYNOS
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_GIC
 	select COMMON_CLK_SAMSUNG
 	select EXYNOS_THERMAL
 	select EXYNOS_PMU
 	select EXYNOS_SROM
+	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG

arch/arm/mach-imx/Kconfig

 menuconfig ARCH_MXC
 	bool "Freescale i.MX family"
 	depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_IMX_GPT
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select PINCTRL
 	select PM_OPP if PM
 	select SOC_BUS

arch/arm/mach-integrator/Kconfig

@@ -32,9 +32,9 @@ config ARCH_INTEGRATOR_AP
 config INTEGRATOR_IMPD1
 	bool "Include support for Integrator/IM-PD1"
 	depends on ARCH_INTEGRATOR_AP
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
-	select GPIO_PL061 if GPIOLIB
+	select GPIO_PL061
+	select GPIOLIB
 	help
 	  The IM-PD1 is an add-on logic module for the Integrator which
 	  allows ARM(R) Ltd PrimeCells to be developed and evaluated.

arch/arm/mach-meson/Kconfig

 menuconfig ARCH_MESON
 	bool "Amlogic Meson SoCs"
 	depends on ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select GENERIC_IRQ_CHIP
 	select ARM_GIC
 	select CACHE_L2X0

arch/arm/mach-mmp/Kconfig

 menuconfig ARCH_MMP
 	bool "Marvell PXA168/910/MMP2"
 	depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select GPIO_PXA
+	select GPIOLIB
 	select PINCTRL
 	select PLAT_PXA
 	help

arch/arm/mach-moxart/Kconfig

@@ -5,7 +5,7 @@ menuconfig ARCH_MOXART
 	select ARM_DMA_MEM_BUFFERABLE
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select PHYLIB if NETDEVICES
 	help
 	  Say Y here if you want to run your kernel on hardware with a

arch/arm/mach-mv78xx0/Kconfig

 menuconfig ARCH_MV78XX0
 	bool "Marvell MV78xx0"
 	depends on ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
+	select GPIOLIB
 	select MVEBU_MBUS
 	select PCI
 	select PLAT_ORION_LEGACY

arch/arm/mach-mvebu/Kconfig

@@ -8,7 +8,7 @@ menuconfig ARCH_MVEBU
 	select SOC_BUS
 	select MVEBU_MBUS
 	select ZONE_DMA if ARM_LPAE
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select PCI_QUIRKS if PCI
 	select OF_ADDRESS_PCI
 
@@ -119,8 +119,8 @@ config MACH_DOVE
 config MACH_KIRKWOOD
 	bool "Marvell Kirkwood boards"
 	depends on ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
+	select GPIOLIB
 	select KIRKWOOD_CLK
 	select MACH_MVEBU_ANY
 	select ORION_IRQCHIP

arch/arm/mach-mxs/Kconfig

@@ -15,8 +15,8 @@ config SOC_IMX28
 config ARCH_MXS
 	bool "Freescale MXS (i.MX23, i.MX28) support"
 	depends on ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
+	select GPIOLIB
 	select PINCTRL
 	select SOC_BUS
 	select SOC_IMX23

arch/arm/mach-nomadik/Kconfig

 menuconfig ARCH_NOMADIK
 	bool "ST-Ericsson Nomadik"
 	depends on ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
 	select CLKSRC_NOMADIK_MTU
 	select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
 	select CPU_ARM926T
+	select GPIOLIB
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_NOMADIK

arch/arm/mach-omap2/Kconfig

@@ -88,9 +88,9 @@ config ARCH_OMAP2PLUS
 	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select MACH_OMAP_GENERIC
 	select MEMORY
 	select MFD_SYSCON

arch/arm/mach-orion5x/Kconfig

 menuconfig ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU && ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MVEBU_MBUS
 	select PCI
 	select PLAT_ORION_LEGACY

arch/arm/mach-oxnas/Kconfig

 menuconfig ARCH_OXNAS
 	bool "Oxford Semiconductor OXNAS Family SoCs"
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_RESET_CONTROLLER
+	select GPIOLIB
 	select PINCTRL
 	depends on ARCH_MULTI_V5
 	help

arch/arm/mach-picoxcell/Kconfig

 config ARCH_PICOXCELL
 	bool "Picochip PicoXcell"
 	depends on ARCH_MULTI_V6
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
 	select DW_APB_TIMER_OF
+	select GPIOLIB
 	select HAVE_TCM
 	select NO_IOPORT_MAP

arch/arm/mach-prima2/Kconfig

@@ -3,8 +3,8 @@ menuconfig ARCH_SIRF
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
 	select RESET_CONTROLLER
-	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select NO_IOPORT_MAP
 	select REGMAP
 	select PINCTRL

arch/arm/mach-rockchip/Kconfig

@@ -4,10 +4,10 @@ config ARCH_ROCKCHIP
 	select PINCTRL
 	select PINCTRL_ROCKCHIP
 	select ARCH_HAS_RESET_CONTROLLER
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_GIC
 	select CACHE_L2X0
+	select GPIOLIB
 	select HAVE_ARM_ARCH_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP

arch/arm/mach-s3c24xx/Kconfig

@@ -11,7 +11,7 @@ if ARCH_S3C24XX
 
 config PLAT_S3C24XX
 	def_bool y
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select NO_IOPORT_MAP
 	select S3C_DEV_NAND
 	select IRQ_DOMAIN

arch/arm/mach-s3c64xx/Kconfig

@@ -5,12 +5,12 @@
 menuconfig ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	depends on ARCH_MULTI_V6
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
 	select CLKSRC_SAMSUNG_PWM
 	select COMMON_CLK_SAMSUNG
 	select GPIO_SAMSUNG if ATAGS
+	select GPIOLIB
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_TCM

arch/arm/mach-s5pv210/Kconfig

@@ -11,10 +11,10 @@ config ARCH_S5PV210
 	bool "Samsung S5PV210/S5PC110"
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
 	select CLKSRC_SAMSUNG_PWM
 	select COMMON_CLK_SAMSUNG
+	select GPIOLIB
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS

arch/arm/mach-shmobile/Kconfig

@@ -41,7 +41,7 @@ menuconfig ARCH_RENESAS
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select NO_IOPORT_MAP
 	select PINCTRL
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ZONE_DMA if ARM_LPAE
 
 if ARCH_RENESAS

arch/arm/mach-spear/Kconfig

@@ -5,9 +5,9 @@
 menuconfig PLAT_SPEAR
 	bool "ST SPEAr Family"
 	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKSRC_MMIO
+	select GPIOLIB
 
 if PLAT_SPEAR
 

arch/arm/mach-sti/Kconfig

@@ -10,7 +10,7 @@ menuconfig ARCH_STI
 	select MFD_SYSCON
 	select ARCH_HAS_RESET_CONTROLLER
 	select HAVE_ARM_SCU if SMP
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420

arch/arm/mach-sunxi/Kconfig

 menuconfig ARCH_SUNXI
 	bool "Allwinner SoCs"
 	depends on ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_RESET_CONTROLLER
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select PINCTRL
 	select SUN4I_TIMER
 	select RESET_CONTROLLER

arch/arm/mach-tegra/Kconfig

 menuconfig ARCH_TEGRA
 	bool "NVIDIA Tegra"
 	depends on ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
 	select ARM_AMBA
 	select ARM_GIC
 	select CLKSRC_MMIO
+	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select PINCTRL

arch/arm/mach-u300/Kconfig

 menuconfig ARCH_U300
 	bool "ST-Ericsson U300 Series"
 	depends on ARCH_MULTI_V5 && MMU
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
 	select CLKSRC_MMIO
 	select CPU_ARM926T
+	select GPIOLIB
 	select HAVE_TCM
 	select PINCTRL
 	select PINCTRL_COH901

arch/arm/mach-uniphier/platsmp.c

@@ -101,21 +101,13 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
 	np = of_find_compatible_node(NULL, NULL, "socionext,uniphier-smpctrl");
 	ret = of_address_to_resource(np, 0, &res);
 	of_node_put(np);
-	if (!ret) {
-		rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2;
-	} else {
-		/* try old binding too */
-		np = of_find_compatible_node(NULL, NULL,
-					     "socionext,uniphier-system-bus-controller");
-		ret = of_address_to_resource(np, 1, &res);
-		of_node_put(np);
-		if (ret) {
-			pr_err("failed to get resource of SMP control\n");
-			return ret;
-		}
-		rom_rsv2_phys = res.start + 0x1000 + UNIPHIER_SMPCTRL_ROM_RSV2;
+	if (ret) {
+		pr_err("failed to get resource of SMP control\n");
+		return ret;
 	}
 
+	rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2;
+
 	ret = uniphier_smp_copy_trampoline(rom_rsv2_phys);
 	if (ret)
 		return ret;

arch/arm/mach-ux500/Kconfig

@@ -3,13 +3,13 @@ menuconfig ARCH_U8500
 	depends on ARCH_MULTI_V7 && MMU
 	select AB8500_CORE
 	select ABX500_CORE
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_GIC
 	select CACHE_L2X0
 	select CLKSRC_NOMADIK_MTU
+	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select PINCTRL

arch/arm/mach-vexpress/Kconfig

 menuconfig ARCH_VEXPRESS
 	bool "ARM Ltd. Versatile Express family"
 	depends on ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_GLOBAL_TIMER
 	select ARM_TIMER_SP804
 	select COMMON_CLK_VERSATILE
+	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM

arch/arm/mach-vt8500/Kconfig

 config ARCH_VT8500
 	bool
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select CLKDEV_LOOKUP
 	select VT8500_TIMER
 	select PINCTRL