Commit 7c772bed authored by Linus Walleij's avatar Linus Walleij

Merge tag 'sh-pfc-for-v5.4-tag2' of...

Merge tag 'sh-pfc-for-v5.4-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

pinctrl: sh-pfc: Updates for v5.4 (take two)

  - Support switching between function and gpio at runtime,
  - Small fixes and cleanups.
parents 2ff110bb 0a686427
......@@ -866,8 +866,10 @@ static int rza1_dt_node_pin_count(struct device_node *np)
npins = 0;
for_each_child_of_node(np, child) {
of_pins = of_find_property(child, "pinmux", NULL);
if (!of_pins)
if (!of_pins) {
of_node_put(child);
return -EINVAL;
}
npins += of_pins->length / sizeof(u32);
}
......@@ -1025,8 +1027,10 @@ static int rza1_dt_node_to_map(struct pinctrl_dev *pctldev,
for_each_child_of_node(np, child) {
ret = rza1_parse_pinmux_node(rza1_pctl, child, mux_conf,
grpin);
if (ret < 0)
if (ret < 0) {
of_node_put(child);
return ret;
}
grpin += ret;
mux_conf += ret;
......@@ -1272,8 +1276,10 @@ static int rza1_gpio_register(struct rza1_pinctrl *rza1_pctl)
ret = rza1_parse_gpiochip(rza1_pctl, child, &gpio_chips[i],
&gpio_ranges[i]);
if (ret)
if (ret) {
of_node_put(child);
return ret;
}
++i;
}
......
......@@ -11,7 +11,8 @@
*/
#include <linux/bitops.h>
#include <linux/gpio.h>
#include <linux/gpio/driver.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pinctrl/pinmux.h>
......@@ -115,7 +116,7 @@ static void rza2_pin_to_gpio(void __iomem *pfc_base, unsigned int offset,
mask16 = RZA2_PDR_MASK << (pin * 2);
reg16 &= ~mask16;
if (dir == GPIOF_DIR_IN)
if (dir)
reg16 |= RZA2_PDR_INPUT << (pin * 2); /* pin as input */
else
reg16 |= RZA2_PDR_OUTPUT << (pin * 2); /* pin as output */
......@@ -134,18 +135,18 @@ static int rza2_chip_get_direction(struct gpio_chip *chip, unsigned int offset)
reg16 = (reg16 >> (pin * 2)) & RZA2_PDR_MASK;
if (reg16 == RZA2_PDR_OUTPUT)
return GPIOF_DIR_OUT;
return 0;
if (reg16 == RZA2_PDR_INPUT)
return GPIOF_DIR_IN;
return 1;
/*
* This GPIO controller has a default Hi-Z state that is not input or
* output, so force the pin to input now.
*/
rza2_pin_to_gpio(priv->base, offset, GPIOF_DIR_IN);
rza2_pin_to_gpio(priv->base, offset, 1);
return GPIOF_DIR_IN;
return 1;
}
static int rza2_chip_direction_input(struct gpio_chip *chip,
......@@ -153,7 +154,7 @@ static int rza2_chip_direction_input(struct gpio_chip *chip,
{
struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip);
rza2_pin_to_gpio(priv->base, offset, GPIOF_DIR_IN);
rza2_pin_to_gpio(priv->base, offset, 1);
return 0;
}
......@@ -191,7 +192,7 @@ static int rza2_chip_direction_output(struct gpio_chip *chip,
struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip);
rza2_chip_set(chip, offset, val);
rza2_pin_to_gpio(priv->base, offset, GPIOF_DIR_OUT);
rza2_pin_to_gpio(priv->base, offset, 0);
return 0;
}
......
......@@ -7,7 +7,7 @@
*/
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/gpio/driver.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pinctrl/consumer.h>
......
......@@ -26,7 +26,9 @@
#include "../pinconf.h"
struct sh_pfc_pin_config {
u32 type;
unsigned int mux_mark;
bool mux_set;
bool gpio_enabled;
};
struct sh_pfc_pinctrl {
......@@ -355,16 +357,25 @@ static int sh_pfc_func_set_mux(struct pinctrl_dev *pctldev, unsigned selector,
int idx = sh_pfc_get_pin_index(pfc, grp->pins[i]);
struct sh_pfc_pin_config *cfg = &pmx->configs[idx];
if (cfg->type != PINMUX_TYPE_NONE) {
ret = -EBUSY;
/*
* This driver cannot manage both gpio and mux when the gpio
* pin is already enabled. So, this function fails.
*/
if (cfg->gpio_enabled)
return -EBUSY;
ret = sh_pfc_config_mux(pfc, grp->mux[i], PINMUX_TYPE_FUNCTION);
if (ret < 0)
goto done;
}
}
/* All group pins are configured, mark the pins as mux_set */
for (i = 0; i < grp->nr_pins; ++i) {
ret = sh_pfc_config_mux(pfc, grp->mux[i], PINMUX_TYPE_FUNCTION);
if (ret < 0)
break;
int idx = sh_pfc_get_pin_index(pfc, grp->pins[i]);
struct sh_pfc_pin_config *cfg = &pmx->configs[idx];
cfg->mux_set = true;
cfg->mux_mark = grp->mux[i];
}
done:
......@@ -385,14 +396,6 @@ static int sh_pfc_gpio_request_enable(struct pinctrl_dev *pctldev,
spin_lock_irqsave(&pfc->lock, flags);
if (cfg->type != PINMUX_TYPE_NONE) {
dev_err(pfc->dev,
"Pin %u is busy, can't configure it as GPIO.\n",
offset);
ret = -EBUSY;
goto done;
}
if (!pfc->gpio) {
/* If GPIOs are handled externally the pin mux type need to be
* set to GPIO here.
......@@ -404,7 +407,7 @@ static int sh_pfc_gpio_request_enable(struct pinctrl_dev *pctldev,
goto done;
}
cfg->type = PINMUX_TYPE_GPIO;
cfg->gpio_enabled = true;
ret = 0;
......@@ -425,7 +428,10 @@ static void sh_pfc_gpio_disable_free(struct pinctrl_dev *pctldev,
unsigned long flags;
spin_lock_irqsave(&pfc->lock, flags);
cfg->type = PINMUX_TYPE_NONE;
cfg->gpio_enabled = false;
/* If mux is already set, this configures it here */
if (cfg->mux_set)
sh_pfc_config_mux(pfc, cfg->mux_mark, PINMUX_TYPE_FUNCTION);
spin_unlock_irqrestore(&pfc->lock, flags);
}
......@@ -438,7 +444,6 @@ static int sh_pfc_gpio_set_direction(struct pinctrl_dev *pctldev,
int new_type = input ? PINMUX_TYPE_INPUT : PINMUX_TYPE_OUTPUT;
int idx = sh_pfc_get_pin_index(pfc, offset);
const struct sh_pfc_pin *pin = &pfc->info->pins[idx];
struct sh_pfc_pin_config *cfg = &pmx->configs[idx];
unsigned long flags;
unsigned int dir;
int ret;
......@@ -458,8 +463,6 @@ static int sh_pfc_gpio_set_direction(struct pinctrl_dev *pctldev,
if (ret < 0)
goto done;
cfg->type = new_type;
done:
spin_unlock_irqrestore(&pfc->lock, flags);
return ret;
......@@ -782,13 +785,11 @@ static int sh_pfc_map_pins(struct sh_pfc *pfc, struct sh_pfc_pinctrl *pmx)
for (i = 0; i < pfc->info->nr_pins; ++i) {
const struct sh_pfc_pin *info = &pfc->info->pins[i];
struct sh_pfc_pin_config *cfg = &pmx->configs[i];
struct pinctrl_pin_desc *pin = &pmx->pins[i];
/* If the pin number is equal to -1 all pins are considered */
pin->number = info->pin != (u16)-1 ? info->pin : i;
pin->name = info->name;
cfg->type = PINMUX_TYPE_NONE;
}
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment