pinctrl/nomadik: move the platform data header

This moves the platform data header for the Nomadik pin controller
to <linux/platform_data/pinctrl-nomadik.h>.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/mach-nomadik/board-nhk8815.c

@@ -24,6 +24,7 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 #include <asm/hardware/vic.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
@@ -32,7 +33,6 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
 
-#include <plat/gpio-nomadik.h>
 #include <plat/mtu.h>
 #include <plat/pincfg.h>
 

arch/arm/mach-nomadik/cpu-8815.c

@@ -26,8 +26,8 @@
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/clk-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
-#include <plat/gpio-nomadik.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <asm/mach/map.h>

arch/arm/mach-nomadik/i2c-8815nhk.c

@@ -4,7 +4,7 @@
 #include <linux/i2c-algo-bit.h>
 #include <linux/i2c-gpio.h>
 #include <linux/platform_device.h>
-#include <plat/gpio-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 #include <plat/pincfg.h>
 
 /*

arch/arm/mach-ux500/board-mop500-audio.c

@@ -7,8 +7,8 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
-#include <plat/gpio-nomadik.h>
 #include <plat/pincfg.h>
 #include <plat/ste_dma40.h>
 

arch/arm/mach-ux500/board-mop500-pins.c

@@ -9,10 +9,10 @@
 #include <linux/bug.h>
 #include <linux/string.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <asm/mach-types.h>
 #include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
 
 #include <mach/hardware.h>
 

arch/arm/mach-ux500/board-mop500.c

@@ -37,13 +37,13 @@
 #include <linux/of_platform.h>
 #include <linux/leds.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
 
 #include <plat/ste_dma40.h>
-#include <plat/gpio-nomadik.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>

arch/arm/mach-ux500/cpu-db8500.c

@@ -17,14 +17,14 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/mfd/abx500/ab8500.h>
+#include <linux/platform_data/usb-musb-ux500.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <asm/pmu.h>
 #include <asm/mach/map.h>
-#include <plat/gpio-nomadik.h>
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
-#include <linux/platform_data/usb-musb-ux500.h>
 #include <mach/db8500-regs.h>
 
 #include "devices-db8500.h"

arch/arm/mach-ux500/devices-common.c

@@ -11,8 +11,7 @@
 #include <linux/irq.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
-
-#include <plat/gpio-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <mach/hardware.h>
 

drivers/pinctrl/pinctrl-nomadik.c

@@ -44,11 +44,11 @@ static inline u32 prcmu_read(unsigned int reg) {
 static inline void prcmu_write(unsigned int reg, u32 value) {}
 static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {}
 #endif
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <asm/mach/irq.h>
 
 #include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
 
 #include "pinctrl-nomadik.h"
 

drivers/pinctrl/pinctrl-nomadik.h

 #ifndef PINCTRL_PINCTRL_NOMADIK_H
 #define PINCTRL_PINCTRL_NOMADIK_H
 
-#include <plat/gpio-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 /* Package definitions */
 #define PINCTRL_NMK_STN8815	0