Skip to content

L
linux
Commit 7d980915 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files
Options

Merge tag 'phy-for-4.20' of... 

Merge tag 'phy-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 4.20

 *) Add new PHY driver for Socionext PCIe, USB2 and USB3 PHY
 *) Add new PHY driver for Rockchip HDMI PHY
 *) Add new PHY driver for Cadence display port PHY
 *) Add support for UFS PHY in Qualcomm's SDM845 SoC
 *) Add correct PHY init sequence for BCM63138 SATA PHY
 *) Add support for bringing the uart2 out through the usb dm+dp pin in
    Rockchips's rk3188
 *) Re-design R-Car Gen3 USB PHY w.r.t support for OTG
 *) Cleanup Qualcomm's UFS PHY, QMP PHY (for PCIe and USB3) and QUSB2 PHY
 *) A preparation patch to remove the node name pointer from struct device_node
 *) Minor cleanups in some of the other PHY drivers.
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (41 commits)
  phy: renesas: convert to SPDX identifiers
  phy: lantiq: Fix compile warning
  phy: qcom-ufs: Declare 20nm qcom ufs qmp phy as Broken
  scsi/ufs: qcom: Remove ufs_qcom_phy_*() calls from host
  phy: qcom-ufs: Remove stale methods that handle ref clk
  dt-bindings: phy-qcom-qmp: Add UFS phy compatible string for sdm845
  phy: Add QMP phy based UFS phy support for sdm845
  phy: General struct and field cleanup
  phy: Update PHY power control sequence
  phy: rockchip-usb: add usb-uart setup for rk3188
  phy: phy-twl4030-usb: fix denied runtime access
  phy: renesas: rcar-gen3-usb2: add is_otg_channel to use "role" sysfs
  phy: renesas: rcar-gen3-usb2: add conditions for uses_otg_pins == false
  phy: renesas: rcar-gen3-usb2: change a condition "dr_mode"
  phy: renesas: rcar-gen3-usb2: unify OBINTEN handling
  phy: renesas: rcar-gen3-usb2: Check a property to use otg pins
  phy: renesas: rcar-gen3-usb2: Rename has_otg_pins to uses_otg_pins
  phy: renesas: rcar-gen3-usb2: fix vbus_ctrl for role sysfs
  dt-bindings: rcar-gen3-phy-usb2: add no-otg-pins property
  phy: brcm-sata: Add BCM63138 (DSL) PHY init sequence
  ...
parents 29f79155 566b3884
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 3954 additions and 282 deletions
Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
View file @ 7d980915
......@@ -8,6 +8,7 @@ Required properties:
"brcm,iproc-nsp-sata-phy"
"brcm,phy-sata3"
"brcm,iproc-sr-sata-phy"
"brcm,bcm63138-sata-phy"
- address-cells: should be 1
- size-cells: should be 0
- reg: register ranges for the PHY PCB interface
......
Documentation/devicetree/bindings/phy/phy-cadence-dp.txt 0 → 100644
View file @ 7d980915
Cadence MHDP DisplayPort SD0801 PHY binding
===========================================
This binding describes the Cadence SD0801 PHY hardware included with
the Cadence MHDP DisplayPort controller.
-------------------------------------------------------------------------------
Required properties (controller (parent) node):
- compatible : Should be "cdns,dp-phy"
- reg : Defines the following sets of registers in the parent
mhdp device:
- Offset of the DPTX PHY configuration registers
- Offset of the SD0801 PHY configuration registers
- #phy-cells : from the generic PHY bindings, must be 0.
Optional properties:
- num_lanes : Number of DisplayPort lanes to use (1, 2 or 4)
- max_bit_rate : Maximum DisplayPort link bit rate to use, in Mbps (2160,
2430, 2700, 3240, 4320, 5400 or 8100)
-------------------------------------------------------------------------------
Example:
dp_phy: phy@f0fb030a00 {
compatible = "cdns,dp-phy";
reg = <0xf0 0xfb030a00 0x0 0x00000040>,
<0xf0 0xfb500000 0x0 0x00100000>;
num_lanes = <4>;
max_bit_rate = <8100>;
#phy-cells = <0>;
};
Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt 0 → 100644
View file @ 7d980915
ROCKCHIP HDMI PHY WITH INNO IP BLOCK
Required properties:
- compatible : should be one of the listed compatibles:
* "rockchip,rk3228-hdmi-phy",
* "rockchip,rk3328-hdmi-phy";
- reg : Address and length of the hdmi phy control register set
- clocks : phandle + clock specifier for the phy clocks
- clock-names : string, clock name, must contain "sysclk" for system
control and register configuration, "refoclk" for crystal-
oscillator reference PLL clock input and "refpclk" for pclk-
based refeference PLL clock input.
- #clock-cells: should be 0.
- clock-output-names : shall be the name for the output clock.
- interrupts : phandle + interrupt specified for the hdmiphy interrupt
- #phy-cells : must be 0. See ./phy-bindings.txt for details.
Optional properties for rk3328-hdmi-phy:
- nvmem-cells = phandle + nvmem specifier for the cpu-version efuse
- nvmem-cell-names : "cpu-version" to read the chip version, required
for adjustment to some frequency settings
Example:
hdmi_phy: hdmi-phy@12030000 {
compatible = "rockchip,rk3228-hdmi-phy";
reg = <0x12030000 0x10000>;
#phy-cells = <0>;
clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
clock-names = "sysclk", "refoclk", "refpclk";
#clock-cells = <0>;
clock-output-names = "hdmi_phy";
status = "disabled";
};
Then the PHY can be used in other nodes such as:
hdmi: hdmi@200a0000 {
compatible = "rockchip,rk3228-dw-hdmi";
...
phys = <&hdmi_phy>;
phy-names = "hdmi";
...
};
Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
View file @ 7d980915
......@@ -10,16 +10,20 @@ Required properties:
"qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
"qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
"qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845.
"qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
"qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
- reg:
- For "qcom,sdm845-qmp-usb3-phy":
- index 0: address and length of register set for PHY's common serdes
block.
- named register "dp_com" (using reg-names): address and length of the
DP_COM control block.
- For all others:
- offset and length of register set for PHY's common serdes block.
- reg:
- index 0: address and length of register set for PHY's common
serdes block.
- index 1: address and length of the DP_COM control block (for
"qcom,sdm845-qmp-usb3-phy" only).
- reg-names:
- For "qcom,sdm845-qmp-usb3-phy":
- Should be: "reg-base", "dp_com"
- For all others:
- The reg-names property shouldn't be defined.
- #clock-cells: must be 1
- Phy pll outputs a bunch of clocks for Tx, Rx and Pipe
......@@ -35,6 +39,7 @@ Required properties:
"aux" for phy aux clock,
"ref" for 19.2 MHz ref clk,
"com_aux" for phy common block aux clock,
"ref_aux" for phy reference aux clock,
For "qcom,msm8996-qmp-pcie-phy" must contain:
"aux", "cfg_ahb", "ref".
For "qcom,msm8996-qmp-usb3-phy" must contain:
......
Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
View file @ 7d980915
* Renesas R-Car generation 3 USB 2.0 PHY
This file provides information on what the device node for the R-Car generation
3 USB 2.0 PHY contains.
3 and RZ/G2 USB 2.0 PHY contain.
Required properties:
- compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
- compatible: "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
SoC.
"renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
SoC.
"renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
SoC.
......@@ -14,7 +16,8 @@ Required properties:
R8A77990 SoC.
"renesas,usb2-phy-r8a77995" if the device is a part of an
R8A77995 SoC.
"renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device.
"renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 or RZ/G2
compatible device.
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first
......@@ -31,6 +34,8 @@ channel as USB OTG:
- interrupts: interrupt specifier for the PHY.
- vbus-supply: Phandle to a regulator that provides power to the VBUS. This
regulator will be managed during the PHY power on/off sequence.
- renesas,no-otg-pins: boolean, specify when a board does not provide proper
otg pins.
Example (R-Car H3):
......
Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
View file @ 7d980915
* Renesas R-Car generation 3 USB 3.0 PHY
This file provides information on what the device node for the R-Car generation
3 USB 3.0 PHY contains.
3 and RZ/G2 USB 3.0 PHY contain.
If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL
instead of USB3_CLK. However, if you don't want to these features, you don't
need this driver.
Required properties:
- compatible: "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
- compatible: "renesas,r8a774a1-usb3-phy" if the device is a part of an R8A774A1
SoC.
"renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
SoC.
"renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796
SoC.
"renesas,r8a77965-usb3-phy" if the device is a part of an
R8A77965 SoC.
"renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 compatible
device.
"renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 or RZ/G2
compatible device.
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first
......
Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt 0 → 100644
View file @ 7d980915
Socionext UniPhier PCIe PHY bindings
This describes the devicetree bindings for PHY interface built into
PCIe controller implemented on Socionext UniPhier SoCs.
Required properties:
- compatible: Should contain one of the following:
"socionext,uniphier-ld20-pcie-phy" - for LD20 PHY
"socionext,uniphier-pxs3-pcie-phy" - for PXs3 PHY
- reg: Specifies offset and length of the register set for the device.
- #phy-cells: Must be zero.
- clocks: A phandle to the clock gate for PCIe glue layer including
this phy.
- resets: A phandle to the reset line for PCIe glue layer including
this phy.
Optional properties:
- socionext,syscon: A phandle to system control to set configurations
for phy.
Refer to phy/phy-bindings.txt for the generic PHY binding properties.
Example:
pcie_phy: phy@66038000 {
compatible = "socionext,uniphier-ld20-pcie-phy";
reg = <0x66038000 0x4000>;
#phy-cells = <0>;
clocks = <&sys_clk 24>;
resets = <&sys_rst 24>;
socionext,syscon = <&soc_glue>;
};
Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt 0 → 100644
View file @ 7d980915
Socionext UniPhier USB2 PHY
This describes the devicetree bindings for PHY interface built into
USB2 controller implemented on Socionext UniPhier SoCs.
Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3
controller doesn't include its own High-Speed PHY. This needs to specify
USB2 PHY instead of USB3 HS-PHY.
Required properties:
- compatible: Should contain one of the following:
"socionext,uniphier-pro4-usb2-phy" - for Pro4 SoC
"socionext,uniphier-ld11-usb2-phy" - for LD11 SoC
Sub-nodes:
Each PHY should be represented as a sub-node.
Sub-nodes required properties:
- #phy-cells: Should be 0.
- reg: The number of the PHY.
Sub-nodes optional properties:
- vbus-supply: A phandle to the regulator for USB VBUS.
Refer to phy/phy-bindings.txt for the generic PHY binding properties.
Example:
soc-glue@5f800000 {
...
usb-phy {
compatible = "socionext,uniphier-ld11-usb2-phy";
usb_phy0: phy@0 {
reg = <0>;
#phy-cells = <0>;
};
...
};
};
usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
...
phy-names = "usb";
phys = <&usb_phy0>;
};
Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt 0 → 100644
View file @ 7d980915
Socionext UniPhier USB3 High-Speed (HS) PHY
This describes the devicetree bindings for PHY interfaces built into
USB3 controller implemented on Socionext UniPhier SoCs.
Although the controller includes High-Speed PHY and Super-Speed PHY,
this describes about High-Speed PHY.
Required properties:
- compatible: Should contain one of the following:
"socionext,uniphier-pro4-usb3-hsphy" - for Pro4 SoC
"socionext,uniphier-pxs2-usb3-hsphy" - for PXs2 SoC
"socionext,uniphier-ld20-usb3-hsphy" - for LD20 SoC
"socionext,uniphier-pxs3-usb3-hsphy" - for PXs3 SoC
- reg: Specifies offset and length of the register set for the device.
- #phy-cells: Should be 0.
- clocks: A list of phandles to the clock gate for USB3 glue layer.
According to the clock-names, appropriate clocks are required.
- clock-names: Should contain the following:
"gio", "link" - for Pro4 SoC
"phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional.
"phy", "link" - for others
- resets: A list of phandles to the reset control for USB3 glue layer.
According to the reset-names, appropriate resets are required.
- reset-names: Should contain the following:
"gio", "link" - for Pro4 SoC
"phy", "link" - for others
Optional properties:
- vbus-supply: A phandle to the regulator for USB VBUS.
- nvmem-cells: Phandles to nvmem cell that contains the trimming data.
Available only for HS-PHY implemented on LD20 and PXs3, and
if unspecified, default value is used.
- nvmem-cell-names: Should be the following names, which correspond to
each nvmem-cells.
All of the 3 parameters associated with the following names are
required for each port, if any one is omitted, the trimming data
of the port will not be set at all.
"rterm", "sel_t", "hs_i" - Each cell name for phy parameters
Refer to phy/phy-bindings.txt for the generic PHY binding properties.
Example:
usb-glue@65b00000 {
compatible = "socionext,uniphier-ld20-dwc3-glue",
"simple-mfd";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x65b00000 0x400>;
usb_vbus0: regulator {
...
};
usb_hsphy0: hs-phy@200 {
compatible = "socionext,uniphier-ld20-usb3-hsphy";
reg = <0x200 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy";
clocks = <&sys_clk 14>, <&sys_clk 16>;
reset-names = "link", "phy";
resets = <&sys_rst 14>, <&sys_rst 16>;
vbus-supply = <&usb_vbus0>;
nvmem-cell-names = "rterm", "sel_t", "hs_i";
nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
<&usb_hs_i0>;
};
...
};
Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt 0 → 100644
View file @ 7d980915
Socionext UniPhier USB3 Super-Speed (SS) PHY
This describes the devicetree bindings for PHY interfaces built into
USB3 controller implemented on Socionext UniPhier SoCs.
Although the controller includes High-Speed PHY and Super-Speed PHY,
this describes about Super-Speed PHY.
Required properties:
- compatible: Should contain one of the following:
"socionext,uniphier-pro4-usb3-ssphy" - for Pro4 SoC
"socionext,uniphier-pxs2-usb3-ssphy" - for PXs2 SoC
"socionext,uniphier-ld20-usb3-ssphy" - for LD20 SoC
"socionext,uniphier-pxs3-usb3-ssphy" - for PXs3 SoC
- reg: Specifies offset and length of the register set for the device.
- #phy-cells: Should be 0.
- clocks: A list of phandles to the clock gate for USB3 glue layer.
According to the clock-names, appropriate clocks are required.
- clock-names:
"gio", "link" - for Pro4 SoC
"phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional.
"phy", "link" - for others
- resets: A list of phandles to the reset control for USB3 glue layer.
According to the reset-names, appropriate resets are required.
- reset-names:
"gio", "link" - for Pro4 SoC
"phy", "link" - for others
Optional properties:
- vbus-supply: A phandle to the regulator for USB VBUS.
Refer to phy/phy-bindings.txt for the generic PHY binding properties.
Example:
usb-glue@65b00000 {
compatible = "socionext,uniphier-ld20-dwc3-glue",
"simple-mfd";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x65b00000 0x400>;
usb_vbus0: regulator {
...
};
usb_ssphy0: ss-phy@300 {
compatible = "socionext,uniphier-ld20-usb3-ssphy";
reg = <0x300 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy";
clocks = <&sys_clk 14>, <&sys_clk 16>;
reset-names = "link", "phy";
resets = <&sys_rst 14>, <&sys_rst 16>;
vbus-supply = <&usb_vbus0>;
};
...
};
drivers/phy/Kconfig
View file @ 7d980915
......@@ -43,6 +43,7 @@ config PHY_XGENE
source "drivers/phy/allwinner/Kconfig"
source "drivers/phy/amlogic/Kconfig"
source "drivers/phy/broadcom/Kconfig"
source "drivers/phy/cadence/Kconfig"
source "drivers/phy/hisilicon/Kconfig"
source "drivers/phy/lantiq/Kconfig"
source "drivers/phy/marvell/Kconfig"
......@@ -53,6 +54,7 @@ source "drivers/phy/ralink/Kconfig"
source "drivers/phy/renesas/Kconfig"
source "drivers/phy/rockchip/Kconfig"
source "drivers/phy/samsung/Kconfig"
source "drivers/phy/socionext/Kconfig"
source "drivers/phy/st/Kconfig"
source "drivers/phy/tegra/Kconfig"
source "drivers/phy/ti/Kconfig"
......
drivers/phy/Makefile
View file @ 7d980915
......@@ -15,11 +15,13 @@ obj-$(CONFIG_ARCH_RENESAS) += renesas/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-y += broadcom/ \
cadence/ \
hisilicon/ \
marvell/ \
motorola/ \
qualcomm/ \
ralink/ \
samsung/ \
socionext/ \
st/ \
ti/
drivers/phy/broadcom/Kconfig
View file @ 7d980915
......@@ -60,7 +60,8 @@ config PHY_NS2_USB_DRD
config PHY_BRCM_SATA
tristate "Broadcom SATA PHY driver"
depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || \
ARCH_BCM_63XX || COMPILE_TEST
depends on OF
select GENERIC_PHY
default ARCH_BCM_IPROC
......
drivers/phy/broadcom/phy-bcm-cygnus-pcie.c
View file @ 7d980915
......@@ -153,8 +153,8 @@ static int cygnus_pcie_phy_probe(struct platform_device *pdev)
struct cygnus_pcie_phy *p;
if (of_property_read_u32(child, "reg", &id)) {
dev_err(dev, "missing reg property for %s\n",
child->name);
dev_err(dev, "missing reg property for %pOFn\n",
child);
ret = -EINVAL;
goto put_child;
}
......
drivers/phy/broadcom/phy-brcm-sata.c
View file @ 7d980915
......@@ -47,6 +47,7 @@ enum brcm_sata_phy_version {
BRCM_SATA_PHY_IPROC_NS2,
BRCM_SATA_PHY_IPROC_NSP,
BRCM_SATA_PHY_IPROC_SR,
BRCM_SATA_PHY_DSL_28NM,
};
enum brcm_sata_phy_rxaeq_mode {
......@@ -96,7 +97,10 @@ enum sata_phy_regs {
PLLCONTROL_0_FREQ_DET_RESTART = BIT(13),
PLLCONTROL_0_FREQ_MONITOR = BIT(12),
PLLCONTROL_0_SEQ_START = BIT(15),
PLL_CAP_CHARGE_TIME = 0x83,
PLL_VCO_CAL_THRESH = 0x84,
PLL_CAP_CONTROL = 0x85,
PLL_FREQ_DET_TIME = 0x86,
PLL_ACTRL2 = 0x8b,
PLL_ACTRL2_SELDIV_MASK = 0x1f,
PLL_ACTRL2_SELDIV_SHIFT = 9,
......@@ -106,6 +110,9 @@ enum sata_phy_regs {
PLL1_ACTRL2 = 0x82,
PLL1_ACTRL3 = 0x83,
PLL1_ACTRL4 = 0x84,
PLL1_ACTRL5 = 0x85,
PLL1_ACTRL6 = 0x86,
PLL1_ACTRL7 = 0x87,
TX_REG_BANK = 0x070,
TX_ACTRL0 = 0x80,
......@@ -119,6 +126,8 @@ enum sata_phy_regs {
AEQ_FRC_EQ_FORCE = BIT(0),
AEQ_FRC_EQ_FORCE_VAL = BIT(1),
AEQRX_REG_BANK_1 = 0xe0,
AEQRX_SLCAL0_CTRL0 = 0x82,
AEQRX_SLCAL1_CTRL0 = 0x86,
OOB_REG_BANK = 0x150,
OOB1_REG_BANK = 0x160,
......@@ -168,6 +177,7 @@ static inline void __iomem *brcm_sata_pcb_base(struct brcm_sata_port *port)
switch (priv->version) {
case BRCM_SATA_PHY_STB_28NM:
case BRCM_SATA_PHY_IPROC_NS2:
case BRCM_SATA_PHY_DSL_28NM:
size = SATA_PCB_REG_28NM_SPACE_SIZE;
break;
case BRCM_SATA_PHY_STB_40NM:
......@@ -482,6 +492,61 @@ static int brcm_sr_sata_init(struct brcm_sata_port *port)
return 0;
}
static int brcm_dsl_sata_init(struct brcm_sata_port *port)
{
void __iomem *base = brcm_sata_pcb_base(port);
struct device *dev = port->phy_priv->dev;
unsigned int try;
u32 tmp;
brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL7, 0, 0x873);
brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0xc000);
brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
0, 0x3089);
usleep_range(1000, 2000);
brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
0, 0x3088);
usleep_range(1000, 2000);
brcm_sata_phy_wr(base, AEQRX_REG_BANK_1, AEQRX_SLCAL0_CTRL0,
0, 0x3000);
brcm_sata_phy_wr(base, AEQRX_REG_BANK_1, AEQRX_SLCAL1_CTRL0,
0, 0x3000);
usleep_range(1000, 2000);
brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_CAP_CHARGE_TIME, 0, 0x32);
brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_VCO_CAL_THRESH, 0, 0xa);
brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_FREQ_DET_TIME, 0, 0x64);
usleep_range(1000, 2000);
/* Acquire PLL lock */
try = 50;
while (try) {
tmp = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
BLOCK0_XGXSSTATUS);
if (tmp & BLOCK0_XGXSSTATUS_PLL_LOCK)
break;
msleep(20);
try--;
};
if (!try) {
/* PLL did not lock; give up */
dev_err(dev, "port%d PLL did not lock\n", port->portnum);
return -ETIMEDOUT;
}
dev_dbg(dev, "port%d initialized\n", port->portnum);
return 0;
}
static int brcm_sata_phy_init(struct phy *phy)
{
int rc;
......@@ -501,6 +566,9 @@ static int brcm_sata_phy_init(struct phy *phy)
case BRCM_SATA_PHY_IPROC_SR:
rc = brcm_sr_sata_init(port);
break;
case BRCM_SATA_PHY_DSL_28NM:
rc = brcm_dsl_sata_init(port);
break;
default:
rc = -ENODEV;
}
......@@ -552,6 +620,8 @@ static const struct of_device_id brcm_sata_phy_of_match[] = {
.data = (void *)BRCM_SATA_PHY_IPROC_NSP },
{ .compatible = "brcm,iproc-sr-sata-phy",
.data = (void *)BRCM_SATA_PHY_IPROC_SR },
{ .compatible = "brcm,bcm63138-sata-phy",
.data = (void *)BRCM_SATA_PHY_DSL_28NM },
{},
};
MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
......@@ -600,8 +670,8 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
struct brcm_sata_port *port;
if (of_property_read_u32(child, "reg", &id)) {
dev_err(dev, "missing reg property in node %s\n",
child->name);
dev_err(dev, "missing reg property in node %pOFn\n",
child);
ret = -EINVAL;
goto put_child;
}
......
drivers/phy/broadcom/phy-brcm-usb.c
View file @ 7d980915
......@@ -372,10 +372,8 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
clk_disable(priv->usb_30_clk);
phy_provider = devm_of_phy_provider_register(dev, brcm_usb_phy_xlate);
if (IS_ERR(phy_provider))
return PTR_ERR(phy_provider);
return 0;
return PTR_ERR_OR_ZERO(phy_provider);
}
#ifdef CONFIG_PM_SLEEP
......
drivers/phy/cadence/Kconfig 0 → 100644
View file @ 7d980915
#
# Phy driver for Cadence MHDP DisplayPort controller
#
config PHY_CADENCE_DP
tristate "Cadence MHDP DisplayPort PHY driver"
depends on OF
depends on HAS_IOMEM
select GENERIC_PHY
help
Support for Cadence MHDP DisplayPort PHY.
drivers/phy/cadence/Makefile 0 → 100644
View file @ 7d980915
obj-$(CONFIG_PHY_CADENCE_DP) += phy-cadence-dp.o
drivers/phy/cadence/phy-cadence-dp.c 0 → 100644
View file @ 7d980915
This diff is collapsed.
drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
View file @ 7d980915
......@@ -156,7 +156,6 @@ static int ltq_rcu_usb2_of_parse(struct ltq_rcu_usb2_priv *priv,
{
struct device *dev = priv->dev;
const __be32 *offset;
int ret;
priv->reg_bits = of_device_get_match_data(dev);
......@@ -196,10 +195,8 @@ static int ltq_rcu_usb2_of_parse(struct ltq_rcu_usb2_priv *priv,
}
priv->phy_reset = devm_reset_control_get_optional(dev, "phy");
if (IS_ERR(priv->phy_reset))
return PTR_ERR(priv->phy_reset);
return 0;
return PTR_ERR_OR_ZERO(priv->phy_reset);
}
static int ltq_rcu_usb2_phy_probe(struct platform_device *pdev)
......
drivers/phy/marvell/phy-berlin-sata.c
View file @ 7d980915
......@@ -231,14 +231,14 @@ static int phy_berlin_sata_probe(struct platform_device *pdev)
struct phy_berlin_desc *phy_desc;
if (of_property_read_u32(child, "reg", &phy_id)) {
dev_err(dev, "missing reg property in node %s\n",
child->name);
dev_err(dev, "missing reg property in node %pOFn\n",
child);
ret = -EINVAL;
goto put_child;
}
if (phy_id >= ARRAY_SIZE(phy_berlin_power_down_bits)) {
dev_err(dev, "invalid reg in node %s\n", child->name);
dev_err(dev, "invalid reg in node %pOFn\n", child);
ret = -EINVAL;
goto put_child;
}
......
drivers/phy/qualcomm/Kconfig
View file @ 7d980915
......@@ -50,6 +50,23 @@ config PHY_QCOM_UFS
help
Support for UFS PHY on QCOM chipsets.
if PHY_QCOM_UFS
config PHY_QCOM_UFS_14NM
tristate
default PHY_QCOM_UFS
help
Support for 14nm UFS QMP phy present on QCOM chipsets.
config PHY_QCOM_UFS_20NM
tristate
default PHY_QCOM_UFS
depends on BROKEN
help
Support for 20nm UFS QMP phy present on QCOM chipsets.
endif
config PHY_QCOM_USB_HS
tristate "Qualcomm USB HS PHY module"
depends on USB_ULPI_BUS
......
drivers/phy/qualcomm/Makefile
View file @ 7d980915
......@@ -5,7 +5,7 @@ obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy-qcom-ufs-qmp-14nm.o
obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o
obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
drivers/phy/qualcomm/phy-qcom-qmp.c
View file @ 7d980915
This diff is collapsed.
drivers/phy/qualcomm/phy-qcom-qmp.h
View file @ 7d980915
......@@ -184,6 +184,8 @@
#define QSERDES_V3_COM_VCO_TUNE2_MODE0 0x0f8
#define QSERDES_V3_COM_VCO_TUNE1_MODE1 0x0fc
#define QSERDES_V3_COM_VCO_TUNE2_MODE1 0x100
#define QSERDES_V3_COM_VCO_TUNE_INITVAL1 0x104
#define QSERDES_V3_COM_VCO_TUNE_INITVAL2 0x108
#define QSERDES_V3_COM_VCO_TUNE_TIMER1 0x11c
#define QSERDES_V3_COM_VCO_TUNE_TIMER2 0x120
#define QSERDES_V3_COM_CLK_SELECT 0x138
......@@ -211,8 +213,13 @@
/* Only for QMP V3 PHY - RX registers */
#define QSERDES_V3_RX_UCDR_SO_GAIN_HALF 0x00c
#define QSERDES_V3_RX_UCDR_SO_GAIN 0x014
#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF 0x024
#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER 0x028
#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN 0x02c
#define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN 0x030
#define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034
#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW 0x03c
#define QSERDES_V3_RX_UCDR_PI_CONTROLS 0x044
#define QSERDES_V3_RX_RX_TERM_BW 0x07c
#define QSERDES_V3_RX_VGA_CAL_CNTRL1 0x0bc
#define QSERDES_V3_RX_VGA_CAL_CNTRL2 0x0c0
......@@ -239,6 +246,8 @@
#define QPHY_V3_PCS_TXMGN_V3 0x018
#define QPHY_V3_PCS_TXMGN_V4 0x01c
#define QPHY_V3_PCS_TXMGN_LS 0x020
#define QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL 0x02c
#define QPHY_V3_PCS_TX_SMALL_AMP_DRV_LVL 0x034
#define QPHY_V3_PCS_TXDEEMPH_M6DB_V0 0x024
#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0 0x028
#define QPHY_V3_PCS_TXDEEMPH_M6DB_V1 0x02c
......@@ -275,6 +284,12 @@
#define QPHY_V3_PCS_FLL_CNT_VAL_L 0x0cc
#define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL 0x0d0
#define QPHY_V3_PCS_FLL_MAN_CODE 0x0d4
#define QPHY_V3_PCS_RX_SYM_RESYNC_CTRL 0x134
#define QPHY_V3_PCS_RX_MIN_HIBERN8_TIME 0x138
#define QPHY_V3_PCS_RX_SIGDET_CTRL1 0x13c
#define QPHY_V3_PCS_RX_SIGDET_CTRL2 0x140
#define QPHY_V3_PCS_TX_MID_TERM_CTRL1 0x1bc
#define QPHY_V3_PCS_MULTI_LANE_CTRL1 0x1c4
#define QPHY_V3_PCS_RX_SIGDET_LVL 0x1d8
#define QPHY_V3_PCS_REFGEN_REQ_CONFIG1 0x20c
#define QPHY_V3_PCS_REFGEN_REQ_CONFIG2 0x210
......
drivers/phy/qualcomm/phy-qcom-qusb2.c
View file @ 7d980915
......@@ -800,7 +800,9 @@ static int qusb2_phy_probe(struct platform_device *pdev)
ret = devm_regulator_bulk_get(dev, num, qphy->vregs);
if (ret) {
dev_err(dev, "failed to get regulator supplies\n");
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to get regulator supplies: %d\n",
ret);
return ret;
}
......
drivers/phy/qualcomm/phy-qcom-ufs-i.h
View file @ 7d980915
......@@ -17,9 +17,9 @@
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/phy/phy.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/phy/phy-qcom-ufs.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/delay.h>
......
drivers/phy/qualcomm/phy-qcom-ufs.c
View file @ 7d980915
......@@ -431,56 +431,6 @@ static void ufs_qcom_phy_disable_ref_clk(struct ufs_qcom_phy *phy)
}
}
#define UFS_REF_CLK_EN (1 << 5)
static void ufs_qcom_phy_dev_ref_clk_ctrl(struct phy *generic_phy, bool enable)
{
struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
if (phy->dev_ref_clk_ctrl_mmio &&
(enable ^ phy->is_dev_ref_clk_enabled)) {
u32 temp = readl_relaxed(phy->dev_ref_clk_ctrl_mmio);
if (enable)
temp |= UFS_REF_CLK_EN;
else
temp &= ~UFS_REF_CLK_EN;
/*
* If we are here to disable this clock immediately after
* entering into hibern8, we need to make sure that device
* ref_clk is active atleast 1us after the hibern8 enter.
*/
if (!enable)
udelay(1);
writel_relaxed(temp, phy->dev_ref_clk_ctrl_mmio);
/* ensure that ref_clk is enabled/disabled before we return */
wmb();
/*
* If we call hibern8 exit after this, we need to make sure that
* device ref_clk is stable for atleast 1us before the hibern8
* exit command.
*/
if (enable)
udelay(1);
phy->is_dev_ref_clk_enabled = enable;
}
}
void ufs_qcom_phy_enable_dev_ref_clk(struct phy *generic_phy)
{
ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true);
}
EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_dev_ref_clk);
void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy)
{
ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false);
}
EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_dev_ref_clk);
/* Turn ON M-PHY RMMI interface clocks */
static int ufs_qcom_phy_enable_iface_clk(struct ufs_qcom_phy *phy)
{
......
drivers/phy/renesas/Kconfig
View file @ 7d980915
# SPDX-License-Identifier: GPL-2.0
#
# Phy drivers for Renesas platforms
#
......
drivers/phy/renesas/Makefile
View file @ 7d980915
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
obj-$(CONFIG_PHY_RCAR_GEN3_PCIE) += phy-rcar-gen3-pcie.o
obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
......
drivers/phy/renesas/phy-rcar-gen2.c
View file @ 7d980915
// SPDX-License-Identifier: GPL-2.0
/*
* Renesas R-Car Gen2 PHY driver
*
* Copyright (C) 2014 Renesas Solutions Corp.
* Copyright (C) 2014 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
......
drivers/phy/renesas/phy-rcar-gen3-usb2.c
View file @ 7d980915
// SPDX-License-Identifier: GPL-2.0
/*
* Renesas R-Car Gen3 for USB2.0 PHY driver
*
......@@ -6,10 +7,6 @@
* This is based on the phy-rcar-gen2 driver:
* Copyright (C) 2014 Renesas Solutions Corp.
* Copyright (C) 2014 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/extcon-provider.h>
......@@ -81,18 +78,29 @@
#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
#define USB2_ADPCTRL_DRVVBUS BIT(4)
#define RCAR_GEN3_PHY_HAS_DEDICATED_PINS 1
struct rcar_gen3_chan {
void __iomem *base;
struct extcon_dev *extcon;
struct phy *phy;
struct regulator *vbus;
struct work_struct work;
enum usb_dr_mode dr_mode;
bool extcon_host;
bool has_otg_pins;
bool is_otg_channel;
bool uses_otg_pins;
};
/*
* Combination about is_otg_channel and uses_otg_pins:
*
* Parameters || Behaviors
* is_otg_channel | uses_otg_pins || irqs | role sysfs
* ---------------------+---------------++--------------+------------
* true | true || enabled | enabled
* true | false || disabled | enabled
* false | any || disabled | disabled
*/
static void rcar_gen3_phy_usb2_work(struct work_struct *work)
{
struct rcar_gen3_chan *ch = container_of(work, struct rcar_gen3_chan,
......@@ -147,6 +155,18 @@ static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
writel(val, usb2_base + USB2_ADPCTRL);
}
static void rcar_gen3_control_otg_irq(struct rcar_gen3_chan *ch, int enable)
{
void __iomem *usb2_base = ch->base;
u32 val = readl(usb2_base + USB2_OBINTEN);
if (ch->uses_otg_pins && enable)
val |= USB2_OBINT_BITS;
else
val &= ~USB2_OBINT_BITS;
writel(val, usb2_base + USB2_OBINTEN);
}
static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch)
{
rcar_gen3_set_linectrl(ch, 1, 1);
......@@ -192,20 +212,19 @@ static void rcar_gen3_init_for_a_peri(struct rcar_gen3_chan *ch)
static void rcar_gen3_init_from_a_peri_to_a_host(struct rcar_gen3_chan *ch)
{
void __iomem *usb2_base = ch->base;
u32 val;
rcar_gen3_control_otg_irq(ch, 0);
val = readl(usb2_base + USB2_OBINTEN);
writel(val & ~USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
rcar_gen3_enable_vbus_ctrl(ch, 0);
rcar_gen3_enable_vbus_ctrl(ch, 1);
rcar_gen3_init_for_host(ch);
writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
rcar_gen3_control_otg_irq(ch, 1);
}
static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
{
if (!ch->uses_otg_pins)
return (ch->dr_mode == USB_DR_MODE_HOST) ? false : true;
return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
}
......@@ -237,7 +256,7 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr,
bool is_b_device;
enum phy_mode cur_mode, new_mode;
if (!ch->has_otg_pins || !ch->phy->init_count)
if (!ch->is_otg_channel || !ch->phy->init_count)
return -EIO;
if (!strncmp(buf, "host", strlen("host")))
......@@ -275,7 +294,7 @@ static ssize_t role_show(struct device *dev, struct device_attribute *attr,
{
struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
if (!ch->has_otg_pins || !ch->phy->init_count)
if (!ch->is_otg_channel || !ch->phy->init_count)
return -EIO;
return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" :
......@@ -291,8 +310,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
val = readl(usb2_base + USB2_VBCTRL);
writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
val = readl(usb2_base + USB2_OBINTEN);
writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
rcar_gen3_control_otg_irq(ch, 1);
val = readl(usb2_base + USB2_ADPCTRL);
writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
val = readl(usb2_base + USB2_LINECTRL1);
......@@ -314,7 +332,7 @@ static int rcar_gen3_phy_usb2_init(struct phy *p)
writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
/* Initialize otg part */
if (channel->has_otg_pins)
if (channel->is_otg_channel)
rcar_gen3_init_otg(channel);
return 0;
......@@ -388,21 +406,10 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
}
static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
{
.compatible = "renesas,usb2-phy-r8a7795",
.data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
},
{
.compatible = "renesas,usb2-phy-r8a7796",
.data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
},
{
.compatible = "renesas,usb2-phy-r8a77965",
.data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
},
{
.compatible = "renesas,rcar-gen3-usb2-phy",
},
{ .compatible = "renesas,usb2-phy-r8a7795" },
{ .compatible = "renesas,usb2-phy-r8a7796" },
{ .compatible = "renesas,usb2-phy-r8a77965" },
{ .compatible = "renesas,rcar-gen3-usb2-phy" },
{ }
};
MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
......@@ -445,10 +452,13 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
dev_err(dev, "No irq handler (%d)\n", irq);
}
if (of_usb_get_dr_mode_by_phy(dev->of_node, 0) == USB_DR_MODE_OTG) {
channel->dr_mode = of_usb_get_dr_mode_by_phy(dev->of_node, 0);
if (channel->dr_mode != USB_DR_MODE_UNKNOWN) {
int ret;
channel->has_otg_pins = (uintptr_t)of_device_get_match_data(dev);
channel->is_otg_channel = true;
channel->uses_otg_pins = !of_property_read_bool(dev->of_node,
"renesas,no-otg-pins");
channel->extcon = devm_extcon_dev_allocate(dev,
rcar_gen3_phy_cable);
if (IS_ERR(channel->extcon))
......@@ -490,7 +500,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
dev_err(dev, "Failed to register PHY provider\n");
ret = PTR_ERR(provider);
goto error;
} else if (channel->has_otg_pins) {
} else if (channel->is_otg_channel) {
int ret;
ret = device_create_file(dev, &dev_attr_role);
......@@ -510,7 +520,7 @@ static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev)
{
struct rcar_gen3_chan *channel = platform_get_drvdata(pdev);
if (channel->has_otg_pins)
if (channel->is_otg_channel)
device_remove_file(&pdev->dev, &dev_attr_role);
pm_runtime_disable(&pdev->dev);
......
drivers/phy/renesas/phy-rcar-gen3-usb3.c
View file @ 7d980915
// SPDX-License-Identifier: GPL-2.0
/*
* Renesas R-Car Gen3 for USB3.0 PHY driver
*
* Copyright (C) 2017 Renesas Electronics Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
......
drivers/phy/rockchip/Kconfig
View file @ 7d980915
......@@ -15,6 +15,14 @@ config PHY_ROCKCHIP_EMMC
help
Enable this to support the Rockchip EMMC PHY.
config PHY_ROCKCHIP_INNO_HDMI
tristate "Rockchip INNO HDMI PHY Driver"
depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
depends on COMMON_CLK
select GENERIC_PHY
help
Enable this to support the Rockchip Innosilicon HDMI PHY.
config PHY_ROCKCHIP_INNO_USB2
tristate "Rockchip INNO USB2PHY Driver"
depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
......
drivers/phy/rockchip/Makefile
View file @ 7d980915
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI) += phy-rockchip-inno-hdmi.o
obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o
obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
......
drivers/phy/rockchip/phy-rockchip-emmc.c
View file @ 7d980915
......@@ -337,8 +337,8 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
return -ENOMEM;
if (of_property_read_u32(dev->of_node, "reg", &reg_offset)) {
dev_err(dev, "missing reg property in node %s\n",
dev->of_node->name);
dev_err(dev, "missing reg property in node %pOFn\n",
dev->of_node);
return -EINVAL;
}
......
drivers/phy/rockchip/phy-rockchip-inno-hdmi.c 0 → 100644
View file @ 7d980915
This diff is collapsed.
drivers/phy/rockchip/phy-rockchip-inno-usb2.c
View file @ 7d980915
......@@ -1116,8 +1116,8 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
}
if (of_property_read_u32(np, "reg", &reg)) {
dev_err(dev, "the reg property is not assigned in %s node\n",
np->name);
dev_err(dev, "the reg property is not assigned in %pOFn node\n",
np);
return -EINVAL;
}
......@@ -1143,8 +1143,8 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
}
if (!rphy->phy_cfg) {
dev_err(dev, "no phy-config can be matched with %s node\n",
np->name);
dev_err(dev, "no phy-config can be matched with %pOFn node\n",
np);
return -EINVAL;
}
......
drivers/phy/rockchip/phy-rockchip-typec.c
View file @ 7d980915
......@@ -1145,8 +1145,8 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev)
}
if (!tcphy->port_cfgs) {
dev_err(dev, "no phy-config can be matched with %s node\n",
np->name);
dev_err(dev, "no phy-config can be matched with %pOFn node\n",
np);
return -EINVAL;
}
......@@ -1186,8 +1186,8 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev)
continue;
if (IS_ERR(phy)) {
dev_err(dev, "failed to create phy: %s\n",
child_np->name);
dev_err(dev, "failed to create phy: %pOFn\n",
child_np);
pm_runtime_disable(dev);
return PTR_ERR(phy);
}
......
drivers/phy/rockchip/phy-rockchip-usb.c
View file @ 7d980915
......@@ -36,7 +36,22 @@ static int enable_usb_uart;
#define HIWORD_UPDATE(val, mask) \
((val) | (mask) << 16)
#define UOC_CON0_SIDDQ BIT(13)
#define UOC_CON0 0x00
#define UOC_CON0_SIDDQ BIT(13)
#define UOC_CON0_DISABLE BIT(4)
#define UOC_CON0_COMMON_ON_N BIT(0)
#define UOC_CON2 0x08
#define UOC_CON2_SOFT_CON_SEL BIT(2)
#define UOC_CON3 0x0c
/* bits present on rk3188 and rk3288 phys */
#define UOC_CON3_UTMI_TERMSEL_FULLSPEED BIT(5)
#define UOC_CON3_UTMI_XCVRSEELCT_FSTRANSC (1 << 3)
#define UOC_CON3_UTMI_XCVRSEELCT_MASK (3 << 3)
#define UOC_CON3_UTMI_OPMODE_NODRIVING (1 << 1)
#define UOC_CON3_UTMI_OPMODE_MASK (3 << 1)
#define UOC_CON3_UTMI_SUSPENDN BIT(0)
struct rockchip_usb_phys {
int reg;
......@@ -46,7 +61,8 @@ struct rockchip_usb_phys {
struct rockchip_usb_phy_base;
struct rockchip_usb_phy_pdata {
struct rockchip_usb_phys *phys;
int (*init_usb_uart)(struct regmap *grf);
int (*init_usb_uart)(struct regmap *grf,
const struct rockchip_usb_phy_pdata *pdata);
int usb_uart_phy;
};
......@@ -208,8 +224,8 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
rk_phy->np = child;
if (of_property_read_u32(child, "reg", &reg_offset)) {
dev_err(base->dev, "missing reg property in node %s\n",
child->name);
dev_err(base->dev, "missing reg property in node %pOFn\n",
child);
return -EINVAL;
}
......@@ -313,28 +329,88 @@ static const struct rockchip_usb_phy_pdata rk3066a_pdata = {
},
};
static int __init rockchip_init_usb_uart_common(struct regmap *grf,
const struct rockchip_usb_phy_pdata *pdata)
{
int regoffs = pdata->phys[pdata->usb_uart_phy].reg;
int ret;
u32 val;
/*
* COMMON_ON and DISABLE settings are described in the TRM,
* but were not present in the original code.
* Also disable the analog phy components to save power.
*/
val = HIWORD_UPDATE(UOC_CON0_COMMON_ON_N
| UOC_CON0_DISABLE
| UOC_CON0_SIDDQ,
UOC_CON0_COMMON_ON_N
| UOC_CON0_DISABLE
| UOC_CON0_SIDDQ);
ret = regmap_write(grf, regoffs + UOC_CON0, val);
if (ret)
return ret;
val = HIWORD_UPDATE(UOC_CON2_SOFT_CON_SEL,
UOC_CON2_SOFT_CON_SEL);
ret = regmap_write(grf, regoffs + UOC_CON2, val);
if (ret)
return ret;
val = HIWORD_UPDATE(UOC_CON3_UTMI_OPMODE_NODRIVING
| UOC_CON3_UTMI_XCVRSEELCT_FSTRANSC
| UOC_CON3_UTMI_TERMSEL_FULLSPEED,
UOC_CON3_UTMI_SUSPENDN
| UOC_CON3_UTMI_OPMODE_MASK
| UOC_CON3_UTMI_XCVRSEELCT_MASK
| UOC_CON3_UTMI_TERMSEL_FULLSPEED);
ret = regmap_write(grf, UOC_CON3, val);
if (ret)
return ret;
return 0;
}
#define RK3188_UOC0_CON0 0x10c
#define RK3188_UOC0_CON0_BYPASSSEL BIT(9)
#define RK3188_UOC0_CON0_BYPASSDMEN BIT(8)
/*
* Enable the bypass of uart2 data through the otg usb phy.
* See description of rk3288-variant for details.
*/
static int __init rk3188_init_usb_uart(struct regmap *grf,
const struct rockchip_usb_phy_pdata *pdata)
{
u32 val;
int ret;
ret = rockchip_init_usb_uart_common(grf, pdata);
if (ret)
return ret;
val = HIWORD_UPDATE(RK3188_UOC0_CON0_BYPASSSEL
| RK3188_UOC0_CON0_BYPASSDMEN,
RK3188_UOC0_CON0_BYPASSSEL
| RK3188_UOC0_CON0_BYPASSDMEN);
ret = regmap_write(grf, RK3188_UOC0_CON0, val);
if (ret)
return ret;
return 0;
}
static const struct rockchip_usb_phy_pdata rk3188_pdata = {
.phys = (struct rockchip_usb_phys[]){
{ .reg = 0x10c, .pll_name = "sclk_otgphy0_480m" },
{ .reg = 0x11c, .pll_name = "sclk_otgphy1_480m" },
{ /* sentinel */ }
},
.init_usb_uart = rk3188_init_usb_uart,
.usb_uart_phy = 0,
};
#define RK3288_UOC0_CON0 0x320
#define RK3288_UOC0_CON0_COMMON_ON_N BIT(0)
#define RK3288_UOC0_CON0_DISABLE BIT(4)
#define RK3288_UOC0_CON2 0x328
#define RK3288_UOC0_CON2_SOFT_CON_SEL BIT(2)
#define RK3288_UOC0_CON3 0x32c
#define RK3288_UOC0_CON3_UTMI_SUSPENDN BIT(0)
#define RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING (1 << 1)
#define RK3288_UOC0_CON3_UTMI_OPMODE_MASK (3 << 1)
#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC (1 << 3)
#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK (3 << 3)
#define RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED BIT(5)
#define RK3288_UOC0_CON3_BYPASSDMEN BIT(6)
#define RK3288_UOC0_CON3_BYPASSSEL BIT(7)
......@@ -353,40 +429,13 @@ static const struct rockchip_usb_phy_pdata rk3188_pdata = {
*
* The actual code in the vendor kernel does some things differently.
*/
static int __init rk3288_init_usb_uart(struct regmap *grf)
static int __init rk3288_init_usb_uart(struct regmap *grf,
const struct rockchip_usb_phy_pdata *pdata)
{
u32 val;
int ret;
/*
* COMMON_ON and DISABLE settings are described in the TRM,
* but were not present in the original code.
* Also disable the analog phy components to save power.
*/
val = HIWORD_UPDATE(RK3288_UOC0_CON0_COMMON_ON_N
| RK3288_UOC0_CON0_DISABLE
| UOC_CON0_SIDDQ,
RK3288_UOC0_CON0_COMMON_ON_N
| RK3288_UOC0_CON0_DISABLE
| UOC_CON0_SIDDQ);
ret = regmap_write(grf, RK3288_UOC0_CON0, val);
if (ret)
return ret;
val = HIWORD_UPDATE(RK3288_UOC0_CON2_SOFT_CON_SEL,
RK3288_UOC0_CON2_SOFT_CON_SEL);
ret = regmap_write(grf, RK3288_UOC0_CON2, val);
if (ret)
return ret;
val = HIWORD_UPDATE(RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING
| RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC
| RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED,
RK3288_UOC0_CON3_UTMI_SUSPENDN
| RK3288_UOC0_CON3_UTMI_OPMODE_MASK
| RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK
| RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED);
ret = regmap_write(grf, RK3288_UOC0_CON3, val);
ret = rockchip_init_usb_uart_common(grf, pdata);
if (ret)
return ret;
......@@ -516,7 +565,7 @@ static int __init rockchip_init_usb_uart(void)
return PTR_ERR(grf);
}
ret = data->init_usb_uart(grf);
ret = data->init_usb_uart(grf, data);
if (ret) {
pr_err("%s: could not init usb_uart, %d\n", __func__, ret);
enable_usb_uart = 0;
......
drivers/phy/socionext/Kconfig 0 → 100644
View file @ 7d980915
#
# PHY drivers for Socionext platforms.
#
config PHY_UNIPHIER_USB2
tristate "UniPhier USB2 PHY driver"
depends on ARCH_UNIPHIER || COMPILE_TEST
depends on OF && HAS_IOMEM
select GENERIC_PHY
select MFD_SYSCON
help
Enable this to support USB PHY implemented on USB2 controller
on UniPhier SoCs. This driver provides interface to interact
with USB 2.0 PHY that is part of the UniPhier SoC.
In case of Pro4, it is necessary to specify this USB2 PHY instead
of USB3 HS-PHY.
config PHY_UNIPHIER_USB3
tristate "UniPhier USB3 PHY driver"
depends on ARCH_UNIPHIER || COMPILE_TEST
depends on OF && HAS_IOMEM
select GENERIC_PHY
help
Enable this to support USB PHY implemented in USB3 controller
on UniPhier SoCs. This controller supports USB3.0 and lower speed.
config PHY_UNIPHIER_PCIE
tristate "Uniphier PHY driver for PCIe controller"
depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
default PCIE_UNIPHIER
select GENERIC_PHY
help
Enable this to support PHY implemented in PCIe controller
on UniPhier SoCs. This driver supports LD20 and PXs3 SoCs.
drivers/phy/socionext/Makefile 0 → 100644
View file @ 7d980915
# SPDX-License-Identifier: GPL-2.0
#
# Makefile for the phy drivers.
#
obj-$(CONFIG_PHY_UNIPHIER_USB2) += phy-uniphier-usb2.o
obj-$(CONFIG_PHY_UNIPHIER_USB3) += phy-uniphier-usb3hs.o phy-uniphier-usb3ss.o
obj-$(CONFIG_PHY_UNIPHIER_PCIE) += phy-uniphier-pcie.o
drivers/phy/socionext/phy-uniphier-pcie.c 0 → 100644
View file @ 7d980915
// SPDX-License-Identifier: GPL-2.0
/*
* phy-uniphier-pcie.c - PHY driver for UniPhier PCIe controller
* Copyright 2018, Socionext Inc.
* Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
*/
#include <linux/bitops.h>
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/iopoll.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/resource.h>
/* PHY */
#define PCL_PHY_TEST_I 0x2000
#define PCL_PHY_TEST_O 0x2004
#define TESTI_DAT_MASK GENMASK(13, 6)
#define TESTI_ADR_MASK GENMASK(5, 1)
#define TESTI_WR_EN BIT(0)
#define PCL_PHY_RESET 0x200c
#define PCL_PHY_RESET_N_MNMODE BIT(8) /* =1:manual */
#define PCL_PHY_RESET_N BIT(0) /* =1:deasssert */
/* SG */
#define SG_USBPCIESEL 0x590
#define SG_USBPCIESEL_PCIE BIT(0)
#define PCL_PHY_R00 0
#define RX_EQ_ADJ_EN BIT(3) /* enable for EQ adjustment */
#define PCL_PHY_R06 6
#define RX_EQ_ADJ GENMASK(5, 0) /* EQ adjustment value */
#define RX_EQ_ADJ_VAL 0
#define PCL_PHY_R26 26
#define VCO_CTRL GENMASK(7, 4) /* Tx VCO adjustment value */
#define VCO_CTRL_INIT_VAL 5
struct uniphier_pciephy_priv {
void __iomem *base;
struct device *dev;
struct clk *clk;
struct reset_control *rst;
const struct uniphier_pciephy_soc_data *data;
};
struct uniphier_pciephy_soc_data {
bool has_syscon;
};
static void uniphier_pciephy_testio_write(struct uniphier_pciephy_priv *priv,
u32 data)
{
/* need to read TESTO twice after accessing TESTI */
writel(data, priv->base + PCL_PHY_TEST_I);
readl(priv->base + PCL_PHY_TEST_O);
readl(priv->base + PCL_PHY_TEST_O);
}
static void uniphier_pciephy_set_param(struct uniphier_pciephy_priv *priv,
u32 reg, u32 mask, u32 param)
{
u32 val;
/* read previous data */
val = FIELD_PREP(TESTI_DAT_MASK, 1);
val |= FIELD_PREP(TESTI_ADR_MASK, reg);
uniphier_pciephy_testio_write(priv, val);
val = readl(priv->base + PCL_PHY_TEST_O);
/* update value */
val &= ~FIELD_PREP(TESTI_DAT_MASK, mask);
val = FIELD_PREP(TESTI_DAT_MASK, mask & param);
val |= FIELD_PREP(TESTI_ADR_MASK, reg);
uniphier_pciephy_testio_write(priv, val);
uniphier_pciephy_testio_write(priv, val | TESTI_WR_EN);
uniphier_pciephy_testio_write(priv, val);
/* read current data as dummy */
val = FIELD_PREP(TESTI_DAT_MASK, 1);
val |= FIELD_PREP(TESTI_ADR_MASK, reg);
uniphier_pciephy_testio_write(priv, val);
readl(priv->base + PCL_PHY_TEST_O);
}
static void uniphier_pciephy_assert(struct uniphier_pciephy_priv *priv)
{
u32 val;
val = readl(priv->base + PCL_PHY_RESET);
val &= ~PCL_PHY_RESET_N;
val |= PCL_PHY_RESET_N_MNMODE;
writel(val, priv->base + PCL_PHY_RESET);
}
static void uniphier_pciephy_deassert(struct uniphier_pciephy_priv *priv)
{
u32 val;
val = readl(priv->base + PCL_PHY_RESET);
val |= PCL_PHY_RESET_N_MNMODE | PCL_PHY_RESET_N;
writel(val, priv->base + PCL_PHY_RESET);
}
static int uniphier_pciephy_init(struct phy *phy)
{
struct uniphier_pciephy_priv *priv = phy_get_drvdata(phy);
int ret;
ret = clk_prepare_enable(priv->clk);
if (ret)
return ret;
ret = reset_control_deassert(priv->rst);
if (ret)
goto out_clk_disable;
uniphier_pciephy_set_param(priv, PCL_PHY_R00,
RX_EQ_ADJ_EN, RX_EQ_ADJ_EN);
uniphier_pciephy_set_param(priv, PCL_PHY_R06, RX_EQ_ADJ,
FIELD_PREP(RX_EQ_ADJ, RX_EQ_ADJ_VAL));
uniphier_pciephy_set_param(priv, PCL_PHY_R26, VCO_CTRL,
FIELD_PREP(VCO_CTRL, VCO_CTRL_INIT_VAL));
usleep_range(1, 10);
uniphier_pciephy_deassert(priv);
usleep_range(1, 10);
return 0;
out_clk_disable:
clk_disable_unprepare(priv->clk);
return ret;
}
static int uniphier_pciephy_exit(struct phy *phy)
{
struct uniphier_pciephy_priv *priv = phy_get_drvdata(phy);
uniphier_pciephy_assert(priv);
reset_control_assert(priv->rst);
clk_disable_unprepare(priv->clk);
return 0;
}
static const struct phy_ops uniphier_pciephy_ops = {
.init = uniphier_pciephy_init,
.exit = uniphier_pciephy_exit,
.owner = THIS_MODULE,
};
static int uniphier_pciephy_probe(struct platform_device *pdev)
{
struct uniphier_pciephy_priv *priv;
struct phy_provider *phy_provider;
struct device *dev = &pdev->dev;
struct regmap *regmap;
struct resource *res;
struct phy *phy;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->data = of_device_get_match_data(dev);
if (WARN_ON(!priv->data))
return -EINVAL;
priv->dev = dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->base = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
priv->clk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->clk))
return PTR_ERR(priv->clk);
priv->rst = devm_reset_control_get_shared(dev, NULL);
if (IS_ERR(priv->rst))
return PTR_ERR(priv->rst);
phy = devm_phy_create(dev, dev->of_node, &uniphier_pciephy_ops);
if (IS_ERR(phy))
return PTR_ERR(phy);
regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
"socionext,syscon");
if (!IS_ERR(regmap) && priv->data->has_syscon)
regmap_update_bits(regmap, SG_USBPCIESEL,
SG_USBPCIESEL_PCIE, SG_USBPCIESEL_PCIE);
phy_set_drvdata(phy, priv);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct uniphier_pciephy_soc_data uniphier_ld20_data = {
.has_syscon = true,
};
static const struct uniphier_pciephy_soc_data uniphier_pxs3_data = {
.has_syscon = false,
};
static const struct of_device_id uniphier_pciephy_match[] = {
{
.compatible = "socionext,uniphier-ld20-pcie-phy",
.data = &uniphier_ld20_data,
},
{
.compatible = "socionext,uniphier-pxs3-pcie-phy",
.data = &uniphier_pxs3_data,
},
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, uniphier_pciephy_match);
static struct platform_driver uniphier_pciephy_driver = {
.probe = uniphier_pciephy_probe,
.driver = {
.name = "uniphier-pcie-phy",
.of_match_table = uniphier_pciephy_match,
},
};
module_platform_driver(uniphier_pciephy_driver);
MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
MODULE_DESCRIPTION("UniPhier PHY driver for PCIe controller");
MODULE_LICENSE("GPL v2");
drivers/phy/socionext/phy-uniphier-usb2.c 0 → 100644
View file @ 7d980915
// SPDX-License-Identifier: GPL-2.0
/*
* phy-uniphier-usb2.c - PHY driver for UniPhier USB2 controller
* Copyright 2015-2018 Socionext Inc.
* Author:
* Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
*/
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#define SG_USBPHY1CTRL 0x500
#define SG_USBPHY1CTRL2 0x504
#define SG_USBPHY2CTRL 0x508
#define SG_USBPHY2CTRL2 0x50c /* LD11 */
#define SG_USBPHY12PLL 0x50c /* Pro4 */
#define SG_USBPHY3CTRL 0x510
#define SG_USBPHY3CTRL2 0x514
#define SG_USBPHY4CTRL 0x518 /* Pro4 */
#define SG_USBPHY4CTRL2 0x51c /* Pro4 */
#define SG_USBPHY34PLL 0x51c /* Pro4 */
struct uniphier_u2phy_param {
u32 offset;
u32 value;
};
struct uniphier_u2phy_soc_data {
struct uniphier_u2phy_param config0;
struct uniphier_u2phy_param config1;
};
struct uniphier_u2phy_priv {
struct regmap *regmap;
struct phy *phy;
struct regulator *vbus;
const struct uniphier_u2phy_soc_data *data;
struct uniphier_u2phy_priv *next;
};
static int uniphier_u2phy_power_on(struct phy *phy)
{
struct uniphier_u2phy_priv *priv = phy_get_drvdata(phy);
int ret = 0;
if (priv->vbus)
ret = regulator_enable(priv->vbus);
return ret;
}
static int uniphier_u2phy_power_off(struct phy *phy)
{
struct uniphier_u2phy_priv *priv = phy_get_drvdata(phy);
if (priv->vbus)
regulator_disable(priv->vbus);
return 0;
}
static int uniphier_u2phy_init(struct phy *phy)
{
struct uniphier_u2phy_priv *priv = phy_get_drvdata(phy);
if (!priv->data)
return 0;
regmap_write(priv->regmap, priv->data->config0.offset,
priv->data->config0.value);
regmap_write(priv->regmap, priv->data->config1.offset,
priv->data->config1.value);
return 0;
}
static struct phy *uniphier_u2phy_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct uniphier_u2phy_priv *priv = dev_get_drvdata(dev);
while (priv && args->np != priv->phy->dev.of_node)
priv = priv->next;
if (!priv) {
dev_err(dev, "Failed to find appropriate phy\n");
return ERR_PTR(-EINVAL);
}
return priv->phy;
}
static const struct phy_ops uniphier_u2phy_ops = {
.init = uniphier_u2phy_init,
.power_on = uniphier_u2phy_power_on,
.power_off = uniphier_u2phy_power_off,
.owner = THIS_MODULE,
};
static int uniphier_u2phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *parent, *child;
struct uniphier_u2phy_priv *priv = NULL, *next = NULL;
struct phy_provider *phy_provider;
struct regmap *regmap;
const struct uniphier_u2phy_soc_data *data;
int ret, data_idx, ndatas;
data = of_device_get_match_data(dev);
if (WARN_ON(!data))
return -EINVAL;
/* get number of data */
for (ndatas = 0; data[ndatas].config0.offset; ndatas++)
;
parent = of_get_parent(dev->of_node);
regmap = syscon_node_to_regmap(parent);
of_node_put(parent);
if (IS_ERR(regmap)) {
dev_err(dev, "Failed to get regmap\n");
return PTR_ERR(regmap);
}
for_each_child_of_node(dev->of_node, child) {
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv) {
ret = -ENOMEM;
goto out_put_child;
}
priv->regmap = regmap;
priv->vbus = devm_regulator_get_optional(dev, "vbus");
if (IS_ERR(priv->vbus)) {
if (PTR_ERR(priv->vbus) == -EPROBE_DEFER) {
ret = PTR_ERR(priv->vbus);
goto out_put_child;
}
priv->vbus = NULL;
}
priv->phy = devm_phy_create(dev, child, &uniphier_u2phy_ops);
if (IS_ERR(priv->phy)) {
dev_err(dev, "Failed to create phy\n");
ret = PTR_ERR(priv->phy);
goto out_put_child;
}
ret = of_property_read_u32(child, "reg", &data_idx);
if (ret) {
dev_err(dev, "Failed to get reg property\n");
goto out_put_child;
}
if (data_idx < ndatas)
priv->data = &data[data_idx];
else
dev_warn(dev, "No phy configuration: %s\n",
child->full_name);
phy_set_drvdata(priv->phy, priv);
priv->next = next;
next = priv;
}
dev_set_drvdata(dev, priv);
phy_provider = devm_of_phy_provider_register(dev,
uniphier_u2phy_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
out_put_child:
of_node_put(child);
return ret;
}
static const struct uniphier_u2phy_soc_data uniphier_pro4_data[] = {
{
.config0 = { SG_USBPHY1CTRL, 0x05142400 },
.config1 = { SG_USBPHY12PLL, 0x00010010 },
},
{
.config0 = { SG_USBPHY2CTRL, 0x05142400 },
.config1 = { SG_USBPHY12PLL, 0x00010010 },
},
{
.config0 = { SG_USBPHY3CTRL, 0x05142400 },
.config1 = { SG_USBPHY34PLL, 0x00010010 },
},
{
.config0 = { SG_USBPHY4CTRL, 0x05142400 },
.config1 = { SG_USBPHY34PLL, 0x00010010 },
},
{ /* sentinel */ }
};
static const struct uniphier_u2phy_soc_data uniphier_ld11_data[] = {
{
.config0 = { SG_USBPHY1CTRL, 0x82280000 },
.config1 = { SG_USBPHY1CTRL2, 0x00000106 },
},
{
.config0 = { SG_USBPHY2CTRL, 0x82280000 },
.config1 = { SG_USBPHY2CTRL2, 0x00000106 },
},
{
.config0 = { SG_USBPHY3CTRL, 0x82280000 },
.config1 = { SG_USBPHY3CTRL2, 0x00000106 },
},
{ /* sentinel */ }
};
static const struct of_device_id uniphier_u2phy_match[] = {
{
.compatible = "socionext,uniphier-pro4-usb2-phy",
.data = &uniphier_pro4_data,
},
{
.compatible = "socionext,uniphier-ld11-usb2-phy",
.data = &uniphier_ld11_data,
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, uniphier_u2phy_match);
static struct platform_driver uniphier_u2phy_driver = {
.probe = uniphier_u2phy_probe,
.driver = {
.name = "uniphier-usb2-phy",
.of_match_table = uniphier_u2phy_match,
},
};
module_platform_driver(uniphier_u2phy_driver);
MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
MODULE_DESCRIPTION("UniPhier PHY driver for USB2 controller");
MODULE_LICENSE("GPL v2");
drivers/phy/socionext/phy-uniphier-usb3hs.c 0 → 100644
View file @ 7d980915
This diff is collapsed.
drivers/phy/socionext/phy-uniphier-usb3ss.c 0 → 100644
View file @ 7d980915
// SPDX-License-Identifier: GPL-2.0
/*
* phy-uniphier-usb3ss.c - SS-PHY driver for Socionext UniPhier USB3 controller
* Copyright 2015-2018 Socionext Inc.
* Author:
* Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
* Contributors:
* Motoya Tanigawa <tanigawa.motoya@socionext.com>
* Masami Hiramatsu <masami.hiramatsu@linaro.org>
*/
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#define SSPHY_TESTI 0x0
#define SSPHY_TESTO 0x4
#define TESTI_DAT_MASK GENMASK(13, 6)
#define TESTI_ADR_MASK GENMASK(5, 1)
#define TESTI_WR_EN BIT(0)
#define PHY_F(regno, msb, lsb) { (regno), (msb), (lsb) }
#define CDR_CPD_TRIM PHY_F(7, 3, 0) /* RxPLL charge pump current */
#define CDR_CPF_TRIM PHY_F(8, 3, 0) /* RxPLL charge pump current 2 */
#define TX_PLL_TRIM PHY_F(9, 3, 0) /* TxPLL charge pump current */
#define BGAP_TRIM PHY_F(11, 3, 0) /* Bandgap voltage */
#define CDR_TRIM PHY_F(13, 6, 5) /* Clock Data Recovery setting */
#define VCO_CTRL PHY_F(26, 7, 4) /* VCO control */
#define VCOPLL_CTRL PHY_F(27, 2, 0) /* TxPLL VCO tuning */
#define VCOPLL_CM PHY_F(28, 1, 0) /* TxPLL voltage */
#define MAX_PHY_PARAMS 7
struct uniphier_u3ssphy_param {
struct {
int reg_no;
int msb;
int lsb;
} field;
u8 value;
};
struct uniphier_u3ssphy_priv {
struct device *dev;
void __iomem *base;
struct clk *clk, *clk_ext, *clk_parent, *clk_parent_gio;
struct reset_control *rst, *rst_parent, *rst_parent_gio;
struct regulator *vbus;
const struct uniphier_u3ssphy_soc_data *data;
};
struct uniphier_u3ssphy_soc_data {
bool is_legacy;
int nparams;
const struct uniphier_u3ssphy_param param[MAX_PHY_PARAMS];
};
static void uniphier_u3ssphy_testio_write(struct uniphier_u3ssphy_priv *priv,
u32 data)
{
/* need to read TESTO twice after accessing TESTI */
writel(data, priv->base + SSPHY_TESTI);
readl(priv->base + SSPHY_TESTO);
readl(priv->base + SSPHY_TESTO);
}
static void uniphier_u3ssphy_set_param(struct uniphier_u3ssphy_priv *priv,
const struct uniphier_u3ssphy_param *p)
{
u32 val;
u8 field_mask = GENMASK(p->field.msb, p->field.lsb);
u8 data;
/* read previous data */
val = FIELD_PREP(TESTI_DAT_MASK, 1);
val |= FIELD_PREP(TESTI_ADR_MASK, p->field.reg_no);
uniphier_u3ssphy_testio_write(priv, val);
val = readl(priv->base + SSPHY_TESTO);
/* update value */
val &= ~FIELD_PREP(TESTI_DAT_MASK, field_mask);
data = field_mask & (p->value << p->field.lsb);
val = FIELD_PREP(TESTI_DAT_MASK, data);
val |= FIELD_PREP(TESTI_ADR_MASK, p->field.reg_no);
uniphier_u3ssphy_testio_write(priv, val);
uniphier_u3ssphy_testio_write(priv, val | TESTI_WR_EN);
uniphier_u3ssphy_testio_write(priv, val);
/* read current data as dummy */
val = FIELD_PREP(TESTI_DAT_MASK, 1);
val |= FIELD_PREP(TESTI_ADR_MASK, p->field.reg_no);
uniphier_u3ssphy_testio_write(priv, val);
readl(priv->base + SSPHY_TESTO);
}
static int uniphier_u3ssphy_power_on(struct phy *phy)
{
struct uniphier_u3ssphy_priv *priv = phy_get_drvdata(phy);
int ret;
ret = clk_prepare_enable(priv->clk_ext);
if (ret)
return ret;
ret = clk_prepare_enable(priv->clk);
if (ret)
goto out_clk_ext_disable;
ret = reset_control_deassert(priv->rst);
if (ret)
goto out_clk_disable;
if (priv->vbus) {
ret = regulator_enable(priv->vbus);
if (ret)
goto out_rst_assert;
}
return 0;
out_rst_assert:
reset_control_assert(priv->rst);
out_clk_disable:
clk_disable_unprepare(priv->clk);
out_clk_ext_disable:
clk_disable_unprepare(priv->clk_ext);
return ret;
}
static int uniphier_u3ssphy_power_off(struct phy *phy)
{
struct uniphier_u3ssphy_priv *priv = phy_get_drvdata(phy);
if (priv->vbus)
regulator_disable(priv->vbus);
reset_control_assert(priv->rst);
clk_disable_unprepare(priv->clk);
clk_disable_unprepare(priv->clk_ext);
return 0;
}
static int uniphier_u3ssphy_init(struct phy *phy)
{
struct uniphier_u3ssphy_priv *priv = phy_get_drvdata(phy);
int i, ret;
ret = clk_prepare_enable(priv->clk_parent);
if (ret)
return ret;
ret = clk_prepare_enable(priv->clk_parent_gio);
if (ret)
goto out_clk_disable;
ret = reset_control_deassert(priv->rst_parent);
if (ret)
goto out_clk_gio_disable;
ret = reset_control_deassert(priv->rst_parent_gio);
if (ret)
goto out_rst_assert;
if (priv->data->is_legacy)
return 0;
for (i = 0; i < priv->data->nparams; i++)
uniphier_u3ssphy_set_param(priv, &priv->data->param[i]);
return 0;
out_rst_assert:
reset_control_assert(priv->rst_parent);
out_clk_gio_disable:
clk_disable_unprepare(priv->clk_parent_gio);
out_clk_disable:
clk_disable_unprepare(priv->clk_parent);
return ret;
}
static int uniphier_u3ssphy_exit(struct phy *phy)
{
struct uniphier_u3ssphy_priv *priv = phy_get_drvdata(phy);
reset_control_assert(priv->rst_parent_gio);
reset_control_assert(priv->rst_parent);
clk_disable_unprepare(priv->clk_parent_gio);
clk_disable_unprepare(priv->clk_parent);
return 0;
}
static const struct phy_ops uniphier_u3ssphy_ops = {
.init = uniphier_u3ssphy_init,
.exit = uniphier_u3ssphy_exit,
.power_on = uniphier_u3ssphy_power_on,
.power_off = uniphier_u3ssphy_power_off,
.owner = THIS_MODULE,
};
static int uniphier_u3ssphy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct uniphier_u3ssphy_priv *priv;
struct phy_provider *phy_provider;
struct resource *res;
struct phy *phy;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->dev = dev;
priv->data = of_device_get_match_data(dev);
if (WARN_ON(!priv->data ||
priv->data->nparams > MAX_PHY_PARAMS))
return -EINVAL;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->base = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
if (!priv->data->is_legacy) {
priv->clk = devm_clk_get(dev, "phy");
if (IS_ERR(priv->clk))
return PTR_ERR(priv->clk);
priv->clk_ext = devm_clk_get(dev, "phy-ext");
if (IS_ERR(priv->clk_ext)) {
if (PTR_ERR(priv->clk_ext) == -ENOENT)
priv->clk_ext = NULL;
else
return PTR_ERR(priv->clk_ext);
}
priv->rst = devm_reset_control_get_shared(dev, "phy");
if (IS_ERR(priv->rst))
return PTR_ERR(priv->rst);
} else {
priv->clk_parent_gio = devm_clk_get(dev, "gio");
if (IS_ERR(priv->clk_parent_gio))
return PTR_ERR(priv->clk_parent_gio);
priv->rst_parent_gio =
devm_reset_control_get_shared(dev, "gio");
if (IS_ERR(priv->rst_parent_gio))
return PTR_ERR(priv->rst_parent_gio);
}
priv->clk_parent = devm_clk_get(dev, "link");
if (IS_ERR(priv->clk_parent))
return PTR_ERR(priv->clk_parent);
priv->rst_parent = devm_reset_control_get_shared(dev, "link");
if (IS_ERR(priv->rst_parent))
return PTR_ERR(priv->rst_parent);
priv->vbus = devm_regulator_get_optional(dev, "vbus");
if (IS_ERR(priv->vbus)) {
if (PTR_ERR(priv->vbus) == -EPROBE_DEFER)
return PTR_ERR(priv->vbus);
priv->vbus = NULL;
}
phy = devm_phy_create(dev, dev->of_node, &uniphier_u3ssphy_ops);
if (IS_ERR(phy))
return PTR_ERR(phy);
phy_set_drvdata(phy, priv);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct uniphier_u3ssphy_soc_data uniphier_pro4_data = {
.is_legacy = true,
};
static const struct uniphier_u3ssphy_soc_data uniphier_pxs2_data = {
.is_legacy = false,
.nparams = 7,
.param = {
{ CDR_CPD_TRIM, 10 },
{ CDR_CPF_TRIM, 3 },
{ TX_PLL_TRIM, 5 },
{ BGAP_TRIM, 9 },
{ CDR_TRIM, 2 },
{ VCOPLL_CTRL, 7 },
{ VCOPLL_CM, 1 },
},
};
static const struct uniphier_u3ssphy_soc_data uniphier_ld20_data = {
.is_legacy = false,
.nparams = 3,
.param = {
{ CDR_CPD_TRIM, 6 },
{ CDR_TRIM, 2 },
{ VCO_CTRL, 5 },
},
};
static const struct of_device_id uniphier_u3ssphy_match[] = {
{
.compatible = "socionext,uniphier-pro4-usb3-ssphy",
.data = &uniphier_pro4_data,
},
{
.compatible = "socionext,uniphier-pxs2-usb3-ssphy",
.data = &uniphier_pxs2_data,
},
{
.compatible = "socionext,uniphier-ld20-usb3-ssphy",
.data = &uniphier_ld20_data,
},
{
.compatible = "socionext,uniphier-pxs3-usb3-ssphy",
.data = &uniphier_ld20_data,
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, uniphier_u3ssphy_match);
static struct platform_driver uniphier_u3ssphy_driver = {
.probe = uniphier_u3ssphy_probe,
.driver = {
.name = "uniphier-usb3-ssphy",
.of_match_table = uniphier_u3ssphy_match,
},
};
module_platform_driver(uniphier_u3ssphy_driver);
MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
MODULE_DESCRIPTION("UniPhier SS-PHY driver for USB3 controller");
MODULE_LICENSE("GPL v2");
drivers/phy/tegra/xusb.c
View file @ 7d980915
......@@ -115,8 +115,8 @@ int tegra_xusb_lane_parse_dt(struct tegra_xusb_lane *lane,
err = match_string(lane->soc->funcs, lane->soc->num_funcs, function);
if (err < 0) {
dev_err(dev, "invalid function \"%s\" for lane \"%s\"\n",
function, np->name);
dev_err(dev, "invalid function \"%s\" for lane \"%pOFn\"\n",
function, np);
return err;
}
......
drivers/phy/ti/phy-twl4030-usb.c
View file @ 7d980915
......@@ -144,6 +144,7 @@
#define PMBR1 0x0D
#define GPIO_USB_4PIN_ULPI_2430C (3 << 0)
static irqreturn_t twl4030_usb_irq(int irq, void *_twl);
/*
* If VBUS is valid or ID is ground, then we know a
* cable is present and we need to be runtime-enabled
......@@ -395,6 +396,33 @@ static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
}
static int __maybe_unused twl4030_usb_suspend(struct device *dev)
{
struct twl4030_usb *twl = dev_get_drvdata(dev);
/*
* we need enabled runtime on resume,
* so turn irq off here, so we do not get it early
* note: wakeup on usb plug works independently of this
*/
dev_dbg(twl->dev, "%s\n", __func__);
disable_irq(twl->irq);
return 0;
}
static int __maybe_unused twl4030_usb_resume(struct device *dev)
{
struct twl4030_usb *twl = dev_get_drvdata(dev);
dev_dbg(twl->dev, "%s\n", __func__);
enable_irq(twl->irq);
/* check whether cable status changed */
twl4030_usb_irq(0, twl);
return 0;
}
static int __maybe_unused twl4030_usb_runtime_suspend(struct device *dev)
{
struct twl4030_usb *twl = dev_get_drvdata(dev);
......@@ -655,6 +683,7 @@ static const struct phy_ops ops = {
static const struct dev_pm_ops twl4030_usb_pm_ops = {
SET_RUNTIME_PM_OPS(twl4030_usb_runtime_suspend,
twl4030_usb_runtime_resume, NULL)
SET_SYSTEM_SLEEP_PM_OPS(twl4030_usb_suspend, twl4030_usb_resume)
};
static int twl4030_usb_probe(struct platform_device *pdev)
......
drivers/scsi/ufs/ufs-qcom.c
View file @ 7d980915
......@@ -16,7 +16,6 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/phy/phy-qcom-ufs.h>
#include "ufshcd.h"
#include "ufshcd-pltfrm.h"
......@@ -189,22 +188,9 @@ static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
struct phy *phy = host->generic_phy;
u32 tx_lanes;
int err = 0;
err = ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes);
if (err)
goto out;
err = ufs_qcom_phy_set_tx_lane_enable(phy, tx_lanes);
if (err)
dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable failed\n",
__func__);
out:
return err;
return ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes);
}
static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
......@@ -932,10 +918,8 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
{
u32 val;
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
struct phy *phy = host->generic_phy;
struct ufs_qcom_dev_params ufs_qcom_cap;
int ret = 0;
int res = 0;
if (!dev_req_params) {
pr_err("%s: incoming dev_req_params is NULL\n", __func__);
......@@ -1002,12 +986,6 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
}
val = ~(MAX_U32 << dev_req_params->lane_tx);
res = ufs_qcom_phy_set_tx_lane_enable(phy, val);
if (res) {
dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable() failed res = %d\n",
__func__, res);
ret = res;
}
/* cache the power mode parameters to use internally */
memcpy(&host->dev_req_params,
......@@ -1264,10 +1242,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
}
}
/* update phy revision information before calling phy_init() */
ufs_qcom_phy_save_controller_version(host->generic_phy,
host->hw_ver.major, host->hw_ver.minor, host->hw_ver.step);
err = ufs_qcom_init_lane_clks(host);
if (err)
goto out_variant_clear;
......
drivers/scsi/ufs/ufs-qcom.h
View file @ 7d980915
......@@ -129,11 +129,6 @@ enum {
MASK_CLK_NS_REG = 0xFFFC00,
};
enum ufs_qcom_phy_init_type {
UFS_PHY_INIT_FULL,
UFS_PHY_INIT_CFG_RESTORE,
};
/* QCOM UFS debug print bit mask */
#define UFS_QCOM_DBG_PRINT_REGS_EN BIT(0)
#define UFS_QCOM_DBG_PRINT_ICE_REGS_EN BIT(1)
......
include/linux/phy/phy-qcom-ufs.h deleted 100644 → 0
View file @ 29f79155
/*
* Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef PHY_QCOM_UFS_H_
#define PHY_QCOM_UFS_H_
#include "phy.h"
/**
* ufs_qcom_phy_enable_dev_ref_clk() - Enable the device
* ref clock.
* @phy: reference to a generic phy.
*/
void ufs_qcom_phy_enable_dev_ref_clk(struct phy *phy);
/**
* ufs_qcom_phy_disable_dev_ref_clk() - Disable the device
* ref clock.
* @phy: reference to a generic phy.
*/
void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy);
int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes);
void ufs_qcom_phy_save_controller_version(struct phy *phy,
u8 major, u16 minor, u16 step);
#endif /* PHY_QCOM_UFS_H_ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7