Commit 7d9bcebe authored by Rodrigo Vivi's avatar Rodrigo Vivi Committed by Daniel Vetter

drm/i915: Use cpu_transcoder for HSW_TVIDEO_DIP_* instead of pipe

While old platforms had 3 transcoders and 3 pipes (1:1), HSW has
4 transcoders and 3 pipes.
These regs were being used only by HDMI code where pipe is always the same
thing as cpu_transcoder.
This patch allow us to use them for DP, specially for TRANSCODER_EDP.

v2: Adding HSW_TVIDEO_DIP_VSC_DATA to transmit vsc to eDP.
Signed-off-by: default avatarRodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 46c06a30
......@@ -3758,14 +3758,16 @@
#define HSW_VIDEO_DIP_VSC_ECC_B 0x61344
#define HSW_VIDEO_DIP_GCP_B 0x61210
#define HSW_TVIDEO_DIP_CTL(pipe) \
_PIPE(pipe, HSW_VIDEO_DIP_CTL_A, HSW_VIDEO_DIP_CTL_B)
#define HSW_TVIDEO_DIP_AVI_DATA(pipe) \
_PIPE(pipe, HSW_VIDEO_DIP_AVI_DATA_A, HSW_VIDEO_DIP_AVI_DATA_B)
#define HSW_TVIDEO_DIP_SPD_DATA(pipe) \
_PIPE(pipe, HSW_VIDEO_DIP_SPD_DATA_A, HSW_VIDEO_DIP_SPD_DATA_B)
#define HSW_TVIDEO_DIP_GCP(pipe) \
_PIPE(pipe, HSW_VIDEO_DIP_GCP_A, HSW_VIDEO_DIP_GCP_B)
#define HSW_TVIDEO_DIP_CTL(trans) \
_TRANSCODER(trans, HSW_VIDEO_DIP_CTL_A, HSW_VIDEO_DIP_CTL_B)
#define HSW_TVIDEO_DIP_AVI_DATA(trans) \
_TRANSCODER(trans, HSW_VIDEO_DIP_AVI_DATA_A, HSW_VIDEO_DIP_AVI_DATA_B)
#define HSW_TVIDEO_DIP_SPD_DATA(trans) \
_TRANSCODER(trans, HSW_VIDEO_DIP_SPD_DATA_A, HSW_VIDEO_DIP_SPD_DATA_B)
#define HSW_TVIDEO_DIP_GCP(trans) \
_TRANSCODER(trans, HSW_VIDEO_DIP_GCP_A, HSW_VIDEO_DIP_GCP_B)
#define HSW_TVIDEO_DIP_VSC_DATA(trans) \
_TRANSCODER(trans, HSW_VIDEO_DIP_VSC_DATA_A, HSW_VIDEO_DIP_VSC_DATA_B)
#define _TRANS_HTOTAL_B 0xe1000
#define _TRANS_HBLANK_B 0xe1004
......
......@@ -120,13 +120,14 @@ static u32 hsw_infoframe_enable(struct dip_infoframe *frame)
}
}
static u32 hsw_infoframe_data_reg(struct dip_infoframe *frame, enum pipe pipe)
static u32 hsw_infoframe_data_reg(struct dip_infoframe *frame,
enum transcoder cpu_transcoder)
{
switch (frame->type) {
case DIP_TYPE_AVI:
return HSW_TVIDEO_DIP_AVI_DATA(pipe);
return HSW_TVIDEO_DIP_AVI_DATA(cpu_transcoder);
case DIP_TYPE_SPD:
return HSW_TVIDEO_DIP_SPD_DATA(pipe);
return HSW_TVIDEO_DIP_SPD_DATA(cpu_transcoder);
default:
DRM_DEBUG_DRIVER("unknown info frame type %d\n", frame->type);
return 0;
......@@ -293,8 +294,8 @@ static void hsw_write_infoframe(struct drm_encoder *encoder,
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
u32 ctl_reg = HSW_TVIDEO_DIP_CTL(intel_crtc->pipe);
u32 data_reg = hsw_infoframe_data_reg(frame, intel_crtc->pipe);
u32 ctl_reg = HSW_TVIDEO_DIP_CTL(intel_crtc->cpu_transcoder);
u32 data_reg = hsw_infoframe_data_reg(frame, intel_crtc->cpu_transcoder);
unsigned int i, len = DIP_HEADER_SIZE + frame->len;
u32 val = I915_READ(ctl_reg);
......@@ -568,7 +569,7 @@ static void hsw_set_infoframes(struct drm_encoder *encoder,
struct drm_i915_private *dev_priv = encoder->dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
u32 reg = HSW_TVIDEO_DIP_CTL(intel_crtc->pipe);
u32 reg = HSW_TVIDEO_DIP_CTL(intel_crtc->cpu_transcoder);
u32 val = I915_READ(reg);
assert_hdmi_port_disabled(intel_hdmi);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment