Commit 7da20788 authored by Takashi Iwai's avatar Takashi Iwai

ALSA: hda: Set fifo_size for both playback and capture streams

Currently we set hdac_stream.fifo_size field only for the playback
stream by some odd reason I forgot, while this field isn't referred in
any places.  Actually this fifo_size field would have been required in
the position report correction for VIA chipset, but due to the lack of
the fifo_size set for capture streams, snd-hda-intel driver fetches
the register by itself.

This patch straightens and simplifies the code by setting the
fifo_size field for both playback and capture streams, and use it in
the HD-audio controller driver.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent a2ef03fe
......@@ -229,11 +229,7 @@ int snd_hdac_stream_setup(struct hdac_stream *azx_dev)
/* set the interrupt enable bits in the descriptor control register */
snd_hdac_stream_updatel(azx_dev, SD_CTL, 0, SD_INT_MASK);
if (azx_dev->direction == SNDRV_PCM_STREAM_PLAYBACK)
azx_dev->fifo_size =
snd_hdac_stream_readw(azx_dev, SD_FIFOSIZE) + 1;
else
azx_dev->fifo_size = 0;
azx_dev->fifo_size = snd_hdac_stream_readw(azx_dev, SD_FIFOSIZE) + 1;
/* when LPIB delay correction gives a small negative value,
* we ignore it; currently set the threshold statically to
......
......@@ -84,8 +84,6 @@ enum {
#define INTEL_SCH_HDA_DEVC 0x78
#define INTEL_SCH_HDA_DEVC_NOSNOOP (0x1<<11)
/* Define IN stream 0 FIFO size offset in VIA controller */
#define VIA_IN_STREAM0_FIFO_SIZE_OFFSET 0x90
/* Define VIA HD Audio Device ID*/
#define VIA_HDAC_DEVICE_ID 0x3288
......@@ -811,11 +809,7 @@ static unsigned int azx_via_get_position(struct azx *chip,
mod_dma_pos = le32_to_cpu(*azx_dev->core.posbuf);
mod_dma_pos %= azx_dev->core.period_bytes;
/* azx_dev->fifo_size can't get FIFO size of in stream.
* Get from base address + offset.
*/
fifo_size = readw(azx_bus(chip)->remap_addr +
VIA_IN_STREAM0_FIFO_SIZE_OFFSET);
fifo_size = azx_stream(azx_dev)->fifo_size - 1;
if (azx_dev->insufficient) {
/* Link position never gather than FIFO size */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment