Skip to content

L
linux
Commit 7e1bfc50 authored by Dmitry Torokhov's avatar Dmitry Torokhov
Browse files
Options

Merge with Linus' tree

parents 3d29f7cb 4ea686bc
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1431 additions and 1311 deletions
Documentation/kernel-parameters.txt
View file @ 7e1bfc50
......@@ -896,8 +896,8 @@ running once the system is up.
psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports
per second.
psmouse.resetafter=
[HW,MOUSE] Try to reset Synaptics Touchpad after so many
bad packets (0 = never).
[HW,MOUSE] Try to reset the device after so many bad packets
(0 = never).
psmouse.resolution=
[HW,MOUSE] Set desired mouse resolution, in dpi.
psmouse.smartscroll=
......
Documentation/usb/mtouchusb.txt
View file @ 7e1bfc50
CHANGES
- Created based off of scanner & INSTALL from the original touchscreen
- 0.3 - Created based off of scanner & INSTALL from the original touchscreen
driver on freshmeat (http://freshmeat.net/projects/3mtouchscreendriver)
- Amended for linux-2.4.18, then 2.4.19
- Complete rewrite using Linux Input in 2.6.3
- 0.5 - Complete rewrite using Linux Input in 2.6.3
Unfortunately no calibration support at this time
- 1.4 - Multiple changes to support the EXII 5000UC and house cleaning
Changed reset from standard USB dev reset to vendor reset
Changed data sent to host from compensated to raw coordinates
Eliminated vendor/product module params
Performed multiple successfull tests with an EXII-5010UC
DRIVER NOTES:
SUPPORTED HARDWARE:
All controllers have the Vendor: 0x0596 & Product: 0x0001
Installation is simple, you only need to add Linux Input, Linux USB, and the
driver to the kernel. The driver can also be optionally built as a module.
If you have another MicroTouch device that you wish to experiment with
or try using this driver with, but the Vendor and Product ID's are not
coded in, don't despair. If the driver was compiled as a module, you can
pass options to the driver. Simply try:
Controller Description Part Number
------------------------------------------------------
/sbin/modprobe mtouchusb vendor=0x#### product=0x****
USB Capacitive - Pearl Case 14-205 (Discontinued)
USB Capacitive - Black Case 14-124 (Discontinued)
USB Capacitive - No Case 14-206 (Discontinued)
If it works, send me the iVendor & iProduct (or a patch) and I will add...
USB Capacitive - Pearl Case EXII-5010UC
USB Capacitive - Black Case EXII-5030UC
USB Capacitive - No Case EXII-5050UC
DRIVER NOTES:
Installation is simple, you only need to add Linux Input, Linux USB, and the
driver to the kernel. The driver can also be optionally built as a module.
This driver appears to be one of possible 2 Linux USB Input Touchscreen
drivers. Although 3M produces a binary only driver available for
......@@ -28,53 +40,28 @@ download, I persist in updating this driver since I would like to use the
touchscreen for embedded apps using QTEmbedded, DirectFB, etc. So I feel the
logical choice is to use Linux Imput.
A little info about the MicroTouch USB controller (14-206):
Y is inverted, and the device has a total possible resolution of 0 - 65535.
Y is inverted by the driver by:
input.absmin[ABS_Y] = MTOUCHUSB_MAX_YC;
input.absmax[ABS_Y] = MTOUCHUSB_MIN_YC;
absmin & absmax are also used to scale the data, sine it is rather high
resolution.
---------------touch screen area-----------------
I MicroTouch (xmax,ymax) @I
I X I
I ########visible monitor area############## I
I #@ (xmin,ymin) # I
I # # I
I # # I
I # # I
I # # I
I # # I
I Y # # I
I # # I
I # # I
I # # I
I # # I
I # # I
I # (xmax,ymax) @# I
I ########################################## I
I I
I@ MicroTouch (xmin,ymin) I
-------------------------------------------------
Currently there is no way to calibrate the device via this driver. Perhaps
at some point an abstract function will be placed into evdev so generic
functions like calibrations, resets, and vendor information can be requested
(And the drivers would handle the vendor specific tasks).
ADDITIONAL INFORMATION/UPDATES:
Currently there is no way to calibrate the device via this driver. Even if
the device could be calibrated, the driver pulls to raw coordinate data from
the controller. This means calibration must be performed within the
userspace.
The controller screen resolution is now 0 to 16384 for both X and Y reporting
the raw touch data. This is the same for the old and new capacitive USB
controllers.
Perhaps at some point an abstract function will be placed into evdev so
generic functions like calibrations, resets, and vendor information can be
requested from the userspace (And the drivers would handle the vendor specific
tasks).
ADDITIONAL INFORMATION/UPDATES/X CONFIGURATION EXAMPLE:
http://groomlakelabs.com/grandamp/code/microtouch/
TODO:
Implement a control urb again to handle requests to and from the device
such as calibration, etc.
such as calibration, etc once/if it becomes available.
DISCLAMER:
......@@ -83,3 +70,7 @@ this driver! If you want touch drivers only supported within X, please go to:
http://www.3m.com/3MTouchSystems/downloads/
THANKS:
A huge thank you to 3M Touch Systems for the EXII-5010UC controllers for
testing!
drivers/input/Kconfig
View file @ 7e1bfc50
......@@ -41,9 +41,16 @@ config INPUT_MOUSEDEV
module will be called mousedev.
config INPUT_MOUSEDEV_PSAUX
bool "Provide legacy /dev/psaux device" if EMBEDDED
bool "Provide legacy /dev/psaux device"
default y
depends on INPUT_MOUSEDEV
---help---
Say Y here if you want your mouse also be accessible as char device
10:1 - /dev/psaux. The data available through /dev/psaux is exactly
the same as the data from /dev/input/mice.
If unsure, say Y.
config INPUT_MOUSEDEV_SCREEN_X
int "Horizontal screen resolution"
......
drivers/input/evbug.c
View file @ 7e1bfc50
......@@ -11,18 +11,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -35,7 +35,7 @@
#include <linux/device.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Input driver event debug module");
MODULE_DESCRIPTION("Input driver event debug module");
MODULE_LICENSE("GPL");
static char evbug_name[] = "evbug";
......@@ -67,7 +67,7 @@ static struct input_handle *evbug_connect(struct input_handler *handler, struct
static void evbug_disconnect(struct input_handle *handle)
{
printk(KERN_DEBUG "evbug.c: Disconnected device: %s\n", handle->dev->phys);
input_close_device(handle);
kfree(handle);
......@@ -79,7 +79,7 @@ static struct input_device_id evbug_ids[] = {
};
MODULE_DEVICE_TABLE(input, evbug_ids);
static struct input_handler evbug_handler = {
.event = evbug_event,
.connect = evbug_connect,
......
drivers/input/evdev.c
View file @ 7e1bfc50
......@@ -220,7 +220,7 @@ static int evdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
case EVIOCGID:
return copy_to_user((void *) arg, &dev->id, sizeof(struct input_id)) ? -EFAULT : 0;
case EVIOCGKEYCODE:
if (get_user(t, ((int *) arg) + 0)) return -EFAULT;
if (t < 0 || t > dev->keycodemax || !dev->keycodesize) return -EINVAL;
......@@ -428,7 +428,7 @@ static struct input_handle *evdev_connect(struct input_handler *handler, struct
devfs_mk_cdev(MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor),
S_IFCHR|S_IRUGO|S_IWUSR, "input/event%d", minor);
class_simple_device_add(input_class,
class_simple_device_add(input_class,
MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor),
dev->dev, "event%d", minor);
......
drivers/input/gameport/cs461x.c
View file @ 7e1bfc50
/*
The all defines and part of code (such as cs461x_*) are
contributed from ALSA 0.5.8 sources.
The all defines and part of code (such as cs461x_*) are
contributed from ALSA 0.5.8 sources.
See http://www.alsa-project.org/ for sources
Tested on Linux 686 2.4.0-test9, ALSA 0.5.8a and CS4610
*/
......@@ -89,8 +89,8 @@ MODULE_LICENSE("GPL");
#define JSIO_BXOE 0x00000040
#define JSIO_BYOE 0x00000080
/*
The card initialization code is obfuscated; the module cs461x
/*
The card initialization code is obfuscated; the module cs461x
need to be loaded after ALSA modules initialized and something
played on the CS 4610 chip (see sources for details of CS4610
initialization code from ALSA)
......@@ -112,7 +112,7 @@ MODULE_LICENSE("GPL");
#define BA1_DWORD_SIZE (13 * 1024 + 512)
#define BA1_MEMORY_COUNT 3
/*
/*
Only one CS461x card is still suppoted; the code requires
redesign to avoid this limitatuion.
*/
......@@ -163,7 +163,7 @@ static int cs461x_free(struct pci_dev *pdev)
if(port){
gameport_unregister_port(port);
kfree(port);
}
}
if (ba0) iounmap(ba0);
#ifdef CS461X_FULL_MAP
if (ba1.name.data0) iounmap(ba1.name.data0);
......@@ -187,13 +187,13 @@ static unsigned char cs461x_gameport_read(struct gameport *gameport)
static int cs461x_gameport_cooked_read(struct gameport *gameport, int *axes, int *buttons)
{
unsigned js1, js2, jst;
js1 = cs461x_peekBA0(BA0_JSC1);
js2 = cs461x_peekBA0(BA0_JSC2);
jst = cs461x_peekBA0(BA0_JSPT);
*buttons = (~jst >> 4) & 0x0F;
*buttons = (~jst >> 4) & 0x0F;
axes[0] = ((js1 & JSC1_Y1V_MASK) >> JSC1_Y1V_SHIFT) & 0xFFFF;
axes[1] = ((js1 & JSC1_X1V_MASK) >> JSC1_X1V_SHIFT) & 0xFFFF;
axes[2] = ((js2 & JSC2_Y2V_MASK) >> JSC2_Y2V_SHIFT) & 0xFFFF;
......@@ -228,7 +228,7 @@ static int __devinit cs461x_pci_probe(struct pci_dev *pdev, const struct pci_dev
{
int rc;
struct gameport* port;
rc = pci_enable_device(pdev);
if (rc) {
printk(KERN_ERR "cs461x: Cannot enable PCI gameport (bus %d, devfn %d) error=%d\n",
......@@ -240,7 +240,7 @@ static int __devinit cs461x_pci_probe(struct pci_dev *pdev, const struct pci_dev
#ifdef CS461X_FULL_MAP
ba1_addr = pci_resource_start(pdev, 1);
#endif
if (ba0_addr == 0 || ba0_addr == ~0
if (ba0_addr == 0 || ba0_addr == ~0
#ifdef CS461X_FULL_MAP
|| ba1_addr == 0 || ba1_addr == ~0
#endif
......@@ -281,7 +281,7 @@ static int __devinit cs461x_pci_probe(struct pci_dev *pdev, const struct pci_dev
memset(port, 0, sizeof(struct gameport));
pci_set_drvdata(pdev, port);
port->open = cs461x_gameport_open;
port->trigger = cs461x_gameport_trigger;
port->read = cs461x_gameport_read;
......@@ -310,7 +310,7 @@ static void __devexit cs461x_pci_remove(struct pci_dev *pdev)
{
cs461x_free(pdev);
}
static struct pci_driver cs461x_pci_driver = {
.name = "CS461x Gameport",
.id_table = cs461x_pci_tbl,
......
drivers/input/gameport/emu10k1-gp.c
View file @ 7e1bfc50
......@@ -11,18 +11,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -48,7 +48,7 @@ struct emu {
int size;
char phys[32];
};
static struct pci_device_id emu_tbl[] = {
{ 0x1102, 0x7002, PCI_ANY_ID, PCI_ANY_ID }, /* SB Live gameport */
{ 0x1102, 0x7003, PCI_ANY_ID, PCI_ANY_ID }, /* Audigy gameport */
......@@ -61,7 +61,7 @@ static int __devinit emu_probe(struct pci_dev *pdev, const struct pci_device_id
{
int ioport, iolen;
struct emu *emu;
if (pci_enable_device(pdev))
return -EBUSY;
......
drivers/input/gameport/fm801-gp.c
View file @ 7e1bfc50
......@@ -111,7 +111,7 @@ static int __devinit fm801_gp_probe(struct pci_dev *pci, const struct pci_device
pci_set_drvdata(pci, gp);
outb(0x60, gp->gameport.io + 0x0d); /* enable joystick 1 and 2 */
outb(0x60, gp->gameport.io + 0x0d); /* enable joystick 1 and 2 */
gameport_register_port(&gp->gameport);
......
drivers/input/gameport/gameport.c
View file @ 7e1bfc50
......@@ -168,7 +168,7 @@ int gameport_open(struct gameport *gameport, struct gameport_dev *dev, int mode)
return -1;
gameport->dev = dev;
return 0;
}
......
drivers/input/gameport/lightning.c
View file @ 7e1bfc50
......@@ -11,18 +11,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -106,7 +106,7 @@ static int l4_cooked_read(struct gameport *gameport, int *axes, int *buttons)
result = 0;
fail: outb(L4_SELECT_ANALOG, L4_PORT);
fail: outb(L4_SELECT_ANALOG, L4_PORT);
return result;
}
......@@ -126,7 +126,7 @@ static int l4_open(struct gameport *gameport, int mode)
static int l4_getcal(int port, int *cal)
{
int i, result = -1;
outb(L4_SELECT_ANALOG, L4_PORT);
outb(L4_SELECT_DIGITAL + (port >> 2), L4_PORT);
......@@ -208,7 +208,7 @@ static int l4_calibrate(struct gameport *gameport, int *axes, int *max)
return 0;
}
static int __init l4_init(void)
{
int cal[4] = {255,255,255,255};
......@@ -266,7 +266,7 @@ static int __init l4_init(void)
if (rev > 0x28) /* on 2.9+ the setcal command works correctly */
l4_setcal(l4->port, cal);
gameport_register_port(gameport);
}
......
drivers/input/gameport/ns558.c
View file @ 7e1bfc50
......@@ -12,18 +12,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -58,7 +58,7 @@ struct ns558 {
char phys[32];
char name[32];
};
static LIST_HEAD(ns558_list);
/*
......@@ -115,7 +115,7 @@ static void ns558_isa_probe(int io)
i = 0;
goto out;
}
/*
/*
* And now find the number of mirrors of the port.
*/
......@@ -291,7 +291,7 @@ void __exit ns558_exit(void)
release_region(port->gameport.io & ~(port->size - 1), port->size);
kfree(port);
break;
default:
break;
}
......
drivers/input/gameport/vortex.c
View file @ 7e1bfc50
......@@ -82,7 +82,7 @@ static int vortex_cooked_read(struct gameport *gameport, int *axes, int *buttons
axes[i] = readw(vortex->io + VORTEX_AXD + i * sizeof(u32));
if (axes[i] == 0x1fff) axes[i] = -1;
}
return 0;
}
......@@ -121,7 +121,7 @@ static int __devinit vortex_probe(struct pci_dev *dev, const struct pci_device_i
vortex->gameport.driver = vortex;
vortex->gameport.fuzz = 64;
vortex->gameport.read = vortex_read;
vortex->gameport.trigger = vortex_trigger;
vortex->gameport.cooked_read = vortex_cooked_read;
......@@ -144,7 +144,7 @@ static int __devinit vortex_probe(struct pci_dev *dev, const struct pci_device_i
vortex->io = vortex->base + id->driver_data;
gameport_register_port(&vortex->gameport);
printk(KERN_INFO "gameport at pci%s speed %d kHz\n",
pci_name(dev), vortex->gameport.speed);
......
drivers/input/input.c
View file @ 7e1bfc50
......@@ -106,7 +106,7 @@ void input_event(struct input_dev *dev, unsigned int type, unsigned int code, in
}
break;
case EV_ABS:
if (code > ABS_MAX || !test_bit(code, dev->absbit))
......@@ -144,27 +144,27 @@ void input_event(struct input_dev *dev, unsigned int type, unsigned int code, in
if (code > MSC_MAX || !test_bit(code, dev->mscbit))
return;
if (dev->event) dev->event(dev, type, code, value);
if (dev->event) dev->event(dev, type, code, value);
break;
case EV_LED:
if (code > LED_MAX || !test_bit(code, dev->ledbit) || !!test_bit(code, dev->led) == value)
return;
change_bit(code, dev->led);
if (dev->event) dev->event(dev, type, code, value);
if (dev->event) dev->event(dev, type, code, value);
break;
case EV_SND:
if (code > SND_MAX || !test_bit(code, dev->sndbit))
return;
if (dev->event) dev->event(dev, type, code, value);
if (dev->event) dev->event(dev, type, code, value);
break;
case EV_REP:
......@@ -181,7 +181,7 @@ void input_event(struct input_dev *dev, unsigned int type, unsigned int code, in
break;
}
if (type != EV_SYN)
if (type != EV_SYN)
dev->sync = 0;
if (dev->grab)
......@@ -282,11 +282,11 @@ static struct input_device_id *input_match_device(struct input_device_id *id, st
if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR)
if (id->id.vendor != dev->id.vendor)
continue;
if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT)
if (id->id.product != dev->id.product)
continue;
if (id->flags & INPUT_DEVICE_ID_MATCH_VERSION)
if (id->id.version != dev->id.version)
continue;
......@@ -351,11 +351,11 @@ static void input_call_hotplug(char *verb, struct input_dev *dev)
}
if (in_interrupt()) {
printk(KERN_ERR "input.c: calling hotplug from interrupt\n");
return;
return;
}
if (!current->fs->root) {
printk(KERN_WARNING "input.c: calling hotplug without valid filesystem\n");
return;
return;
}
if (!(envp = (char **) kmalloc(20 * sizeof(char *), GFP_KERNEL))) {
printk(KERN_ERR "input.c: not enough memory allocating hotplug environment\n");
......@@ -381,17 +381,17 @@ static void input_call_hotplug(char *verb, struct input_dev *dev)
envp[i++] = scratch;
scratch += sprintf(scratch, "PRODUCT=%x/%x/%x/%x",
dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version) + 1;
dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version) + 1;
if (dev->name) {
envp[i++] = scratch;
scratch += sprintf(scratch, "NAME=%s", dev->name) + 1;
scratch += sprintf(scratch, "NAME=%s", dev->name) + 1;
}
if (dev->phys) {
envp[i++] = scratch;
scratch += sprintf(scratch, "PHYS=%s", dev->phys) + 1;
}
scratch += sprintf(scratch, "PHYS=%s", dev->phys) + 1;
}
SPRINTF_BIT_A(evbit, "EV=", EV_MAX);
SPRINTF_BIT_A2(keybit, "KEY=", KEY_MAX, EV_KEY);
......@@ -506,7 +506,7 @@ void input_register_handler(struct input_handler *handler)
input_table[handler->minor >> 5] = handler;
list_add_tail(&handler->node, &input_handler_list);
list_for_each_entry(dev, &input_dev_list, node)
if (!handler->blacklist || !input_match_device(handler->blacklist, dev))
if ((id = input_match_device(handler->id_table, dev)))
......
drivers/input/joydev.c
View file @ 7e1bfc50
/*
* Joystick device driver for the input driver suite.
*
* Copyright (c) 1999-2002 Vojtech Pavlik
* Copyright (c) 1999 Colin Van Dyke
* Copyright (c) 1999-2002 Vojtech Pavlik
* Copyright (c) 1999 Colin Van Dyke
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
......@@ -34,7 +34,7 @@ MODULE_SUPPORTED_DEVICE("input/js");
MODULE_LICENSE("GPL");
#define JOYDEV_MINOR_BASE 0
#define JOYDEV_MINORS 16
#define JOYDEV_MINORS 16
#define JOYDEV_BUFFER_SIZE 64
#define MSECS(t) (1000 * ((t) / HZ) + 1000 * ((t) % HZ) / HZ)
......@@ -115,7 +115,7 @@ static void joydev_event(struct input_handle *handle, unsigned int type, unsigne
default:
return;
}
}
event.time = MSECS(jiffies);
......@@ -449,10 +449,10 @@ static struct input_handle *joydev_connect(struct input_handler *handler, struct
}
joydev_table[minor] = joydev;
devfs_mk_cdev(MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor),
S_IFCHR|S_IRUGO|S_IWUSR, "input/js%d", minor);
class_simple_device_add(input_class,
class_simple_device_add(input_class,
MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor),
dev->dev, "js%d", minor);
......@@ -466,7 +466,7 @@ static void joydev_disconnect(struct input_handle *handle)
joydev->exist = 0;
if (joydev->open)
input_close_device(handle);
input_close_device(handle);
else
joydev_free(joydev);
}
......
drivers/input/joystick/Kconfig
View file @ 7e1bfc50
......@@ -22,7 +22,7 @@ config JOYSTICK_ANALOG
supports many extensions, including joysticks with throttle control,
with rudders, additional hats and buttons compatible with CH
Flightstick Pro, ThrustMaster FCS, 6 and 8 button gamepads, or
Saitek Cyborg joysticks.
Saitek Cyborg joysticks.
Please read the file <file:Documentation/input/joystick.txt> which
contains more information.
......@@ -35,7 +35,7 @@ config JOYSTICK_A3D
depends on INPUT && INPUT_JOYSTICK && GAMEPORT
help
Say Y here if you have an FPGaming or MadCatz controller using the
A3D protocol over the PC gameport.
A3D protocol over the PC gameport.
To compile this driver as a module, choose M here: the
module will be called a3d.
......@@ -45,7 +45,7 @@ config JOYSTICK_ADI
depends on INPUT && INPUT_JOYSTICK && GAMEPORT
help
Say Y here if you have a Logitech controller using the ADI
protocol over the PC gameport.
protocol over the PC gameport.
To compile this driver as a module, choose M here: the
module will be called adi.
......@@ -74,7 +74,7 @@ config JOYSTICK_GRIP
depends on INPUT && INPUT_JOYSTICK && GAMEPORT
help
Say Y here if you have a Gravis controller using the GrIP protocol
over the PC gameport.
over the PC gameport.
To compile this driver as a module, choose M here: the
module will be called grip.
......@@ -94,7 +94,7 @@ config JOYSTICK_GUILLEMOT
depends on INPUT && INPUT_JOYSTICK && GAMEPORT
help
Say Y here if you have a Guillemot joystick using a digital
protocol over the PC gameport.
protocol over the PC gameport.
To compile this driver as a module, choose M here: the
module will be called guillemot.
......@@ -124,7 +124,7 @@ config JOYSTICK_TMDC
depends on INPUT && INPUT_JOYSTICK && GAMEPORT
help
Say Y here if you have a ThrustMaster controller using the
DirectConnect (BSP) protocol over the PC gameport.
DirectConnect (BSP) protocol over the PC gameport.
To compile this driver as a module, choose M here: the
module will be called tmdc.
......@@ -137,7 +137,7 @@ config JOYSTICK_WARRIOR
select SERIO
help
Say Y here if you have a Logitech WingMan Warrior joystick connected
to your computer's serial port.
to your computer's serial port.
To compile this driver as a module, choose M here: the
module will be called warrior.
......@@ -253,7 +253,7 @@ config INPUT_JOYDUMP
help
Say Y here if you want to dump data from your joystick into the system
log for debugging purposes. Say N if you are making a production
configuration or aren't sure.
configuration or aren't sure.
To compile this driver as a module, choose M here: the
module will be called joydump.
......
drivers/input/joystick/a3d.c
View file @ 7e1bfc50
......@@ -39,8 +39,8 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("FP-Gaming Assasin 3D joystick driver");
MODULE_LICENSE("GPL");
#define A3D_MAX_START 400 /* 400 us */
#define A3D_MAX_STROBE 60 /* 40 us */
#define A3D_MAX_START 400 /* 400 us */
#define A3D_MAX_STROBE 60 /* 40 us */
#define A3D_DELAY_READ 3 /* 3 ms */
#define A3D_MAX_LENGTH 40 /* 40*3 bits */
#define A3D_REFRESH_TIME HZ/50 /* 20 ms */
......@@ -125,7 +125,7 @@ static void a3d_read(struct a3d *a3d, unsigned char *data)
input_report_rel(dev, REL_X, ((data[5] << 6) | (data[6] << 3) | data[ 7]) - ((data[5] & 4) << 7));
input_report_rel(dev, REL_Y, ((data[8] << 6) | (data[9] << 3) | data[10]) - ((data[8] & 4) << 7));
input_report_key(dev, BTN_RIGHT, data[2] & 1);
input_report_key(dev, BTN_LEFT, data[3] & 2);
input_report_key(dev, BTN_MIDDLE, data[3] & 4);
......@@ -201,7 +201,7 @@ int a3d_adc_cooked_read(struct gameport *gameport, int *axes, int *buttons)
int i;
for (i = 0; i < 4; i++)
axes[i] = (a3d->axes[i] < 254) ? a3d->axes[i] : -1;
*buttons = a3d->buttons;
*buttons = a3d->buttons;
return 0;
}
......@@ -216,7 +216,7 @@ int a3d_adc_open(struct gameport *gameport, int mode)
if (mode != GAMEPORT_MODE_COOKED)
return -1;
if (!a3d->used++)
mod_timer(&a3d->timer, jiffies + A3D_REFRESH_TIME);
mod_timer(&a3d->timer, jiffies + A3D_REFRESH_TIME);
return 0;
}
......@@ -239,7 +239,7 @@ static int a3d_open(struct input_dev *dev)
{
struct a3d *a3d = dev->private;
if (!a3d->used++)
mod_timer(&a3d->timer, jiffies + A3D_REFRESH_TIME);
mod_timer(&a3d->timer, jiffies + A3D_REFRESH_TIME);
return 0;
}
......@@ -340,7 +340,7 @@ static void a3d_connect(struct gameport *gameport, struct gameport_dev *dev)
a3d->adc.open = a3d_adc_open;
a3d->adc.close = a3d_adc_close;
a3d->adc.cooked_read = a3d_adc_cooked_read;
a3d->adc.fuzz = 1;
a3d->adc.fuzz = 1;
a3d->adc.name = a3d_names[a3d->mode];
a3d->adc.phys = a3d->adcphys;
......
drivers/input/joystick/adi.c
View file @ 7e1bfc50
......@@ -11,18 +11,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -72,8 +72,8 @@ MODULE_LICENSE("GPL");
*/
static char *adi_names[] = { "WingMan Extreme Digital", "ThunderPad Digital", "SideCar", "CyberMan 2",
"WingMan Interceptor", "WingMan Formula", "WingMan GamePad",
"WingMan Extreme Digital 3D", "WingMan GamePad Extreme",
"WingMan Interceptor", "WingMan Formula", "WingMan GamePad",
"WingMan Extreme Digital 3D", "WingMan GamePad Extreme",
"WingMan GamePad USB", "Unknown Device %#x" };
static char adi_wmgpe_abs[] = { ABS_X, ABS_Y, ABS_HAT0X, ABS_HAT0Y };
......@@ -178,7 +178,7 @@ static void adi_read_packet(struct adi_port *port)
/*
* adi_move_bits() detects a possible 2-stream mode, and moves
* the bits accordingly.
* the bits accordingly.
*/
static void adi_move_bits(struct adi_port *port, int length)
......@@ -208,7 +208,7 @@ static inline int adi_get_bits(struct adi *adi, int count)
int i;
if ((adi->idx += count) > adi->ret) return 0;
for (i = 0; i < count; i++)
bits |= ((adi->data[adi->idx - i] >> 5) & 1) << i;
bits |= ((adi->data[adi->idx - i] >> 5) & 1) << i;
return bits;
}
......@@ -224,12 +224,12 @@ static int adi_decode(struct adi *adi)
int i, t;
if (adi->ret < adi->length || adi->id != (adi_get_bits(adi, 4) | (adi_get_bits(adi, 4) << 4)))
return -1;
return -1;
for (i = 0; i < adi->axes10; i++)
for (i = 0; i < adi->axes10; i++)
input_report_abs(dev, *abs++, adi_get_bits(adi, 10));
for (i = 0; i < adi->axes8; i++)
for (i = 0; i < adi->axes8; i++)
input_report_abs(dev, *abs++, adi_get_bits(adi, 8));
for (i = 0; i < adi->buttons && i < 63; i++) {
......@@ -249,7 +249,7 @@ static int adi_decode(struct adi *adi)
for (i = 63; i < adi->buttons; i++)
input_report_key(dev, *key++, adi_get_bits(adi, 1));
input_sync(dev);
return 0;
......@@ -294,7 +294,7 @@ static int adi_open(struct input_dev *dev)
{
struct adi_port *port = dev->private;
if (!port->used++)
mod_timer(&port->timer, jiffies + ADI_REFRESH_TIME);
mod_timer(&port->timer, jiffies + ADI_REFRESH_TIME);
return 0;
}
......@@ -334,7 +334,7 @@ static void adi_id_decode(struct adi *adi, struct adi_port *port)
return;
if (adi->ret < (t = adi_get_bits(adi, 10))) {
printk(KERN_WARNING "adi: Short ID packet: reported: %d != read: %d\n", t, adi->ret);
printk(KERN_WARNING "adi: Short ID packet: reported: %d != read: %d\n", t, adi->ret);
return;
}
......@@ -498,7 +498,7 @@ static void adi_connect(struct gameport *gameport, struct gameport_dev *dev)
adi_init_digital(gameport);
adi_read_packet(port);
if (port->adi[0].ret >= ADI_MIN_LEN_LENGTH)
adi_move_bits(port, adi_get_bits(port->adi, 10));
......
drivers/input/joystick/amijoy.c
View file @ 7e1bfc50
......@@ -46,7 +46,7 @@ MODULE_DESCRIPTION("Driver for Amiga joysticks");
MODULE_LICENSE("GPL");
static int amijoy[2] = { 0, 1 };
static int amijoy_nargs;
static int amijoy_nargs;
module_param_array_named(map, amijoy, uint, amijoy_nargs, 0);
MODULE_PARM_DESC(map, "Map of attached joysticks in form of <a>,<b> (default is 0,1)");
......
drivers/input/joystick/analog.c
View file @ 7e1bfc50
......@@ -11,18 +11,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -237,7 +237,7 @@ static int analog_cooked_read(struct analog_port *port)
loopout = (ANALOG_LOOP_TIME * port->loop) / 1000;
timeout = ANALOG_MAX_TIME * port->speed;
local_irq_save(flags);
gameport_trigger(gameport);
GET_TIME(now);
......@@ -284,7 +284,7 @@ static int analog_button_read(struct analog_port *port, char saitek, char chf)
u = gameport_read(port->gameport);
if (!chf) {
if (!chf) {
port->buttons = (~u >> 4) & 0xf;
return 0;
}
......@@ -333,7 +333,7 @@ static void analog_timer(unsigned long data)
}
}
for (i = 0; i < 2; i++)
for (i = 0; i < 2; i++)
if (port->analog[i].mask)
analog_decode(port->analog + i, port->axes, port->initial, port->buttons);
......@@ -348,7 +348,7 @@ static int analog_open(struct input_dev *dev)
{
struct analog_port *port = dev->private;
if (!port->used++)
mod_timer(&port->timer, jiffies + ANALOG_REFRESH_TIME);
mod_timer(&port->timer, jiffies + ANALOG_REFRESH_TIME);
return 0;
}
......@@ -408,7 +408,7 @@ static void analog_calibrate_timer(struct analog_port *port)
static void analog_name(struct analog *analog)
{
sprintf(analog->name, "Analog %d-axis %d-button",
sprintf(analog->name, "Analog %d-axis %d-button",
hweight8(analog->mask & ANALOG_AXES_STD),
hweight8(analog->mask & ANALOG_BTNS_STD) + !!(analog->mask & ANALOG_BTNS_CHF) * 2 +
hweight16(analog->mask & ANALOG_BTNS_GAMEPAD) + !!(analog->mask & ANALOG_HBTN_CHF) * 4);
......@@ -450,10 +450,10 @@ static void analog_init_device(struct analog_port *port, struct analog *analog,
analog->dev.close = analog_close;
analog->dev.private = port;
analog->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (i = j = 0; i < 4; i++)
if (analog->mask & (1 << i)) {
t = analog_axes[j];
x = port->axes[i];
y = (port->axes[0] + port->axes[1]) >> 1;
......@@ -481,8 +481,8 @@ static void analog_init_device(struct analog_port *port, struct analog *analog,
j++;
}
for (i = j = 0; i < 3; i++)
if (analog->mask & analog_exts[i])
for (i = j = 0; i < 3; i++)
if (analog->mask & analog_exts[i])
for (x = 0; x < 2; x++) {
t = analog_hats[j++];
set_bit(t, analog->dev.absbit);
......@@ -517,7 +517,7 @@ static void analog_init_device(struct analog_port *port, struct analog *analog,
else
printk(" [%s timer, %d %sHz clock, %d ns res]\n", TIME_NAME,
port->speed > 10000 ? (port->speed + 800) / 1000 : port->speed,
port->speed > 10000 ? "M" : "k",
port->speed > 10000 ? "M" : "k",
port->speed > 10000 ? (port->loop * 1000) / (port->speed / 1000)
: (port->loop * 1000000) / port->speed);
}
......@@ -580,11 +580,11 @@ static int analog_init_masks(struct analog_port *port)
gameport_calibrate(port->gameport, port->axes, max);
}
for (i = 0; i < 4; i++)
for (i = 0; i < 4; i++)
port->initial[i] = port->axes[i];
return -!(analog[0].mask || analog[1].mask);
return -!(analog[0].mask || analog[1].mask);
}
static int analog_init_port(struct gameport *gameport, struct gameport_dev *dev, struct analog_port *port)
......@@ -606,7 +606,7 @@ static int analog_init_port(struct gameport *gameport, struct gameport_dev *dev,
wait_ms(ANALOG_MAX_TIME);
port->mask = (gameport_read(gameport) ^ t) & t & 0xf;
port->fuzz = (port->speed * ANALOG_FUZZ_MAGIC) / port->loop / 1000 + ANALOG_FUZZ_BITS;
for (i = 0; i < ANALOG_INIT_RETRIES; i++) {
if (!analog_cooked_read(port)) break;
wait_ms(ANALOG_MAX_TIME);
......@@ -617,11 +617,11 @@ static int analog_init_port(struct gameport *gameport, struct gameport_dev *dev,
wait_ms(ANALOG_MAX_TIME);
t = gameport_time(gameport, ANALOG_MAX_TIME * 1000);
gameport_trigger(gameport);
while ((gameport_read(port->gameport) & port->mask) && (u < t)) u++;
while ((gameport_read(port->gameport) & port->mask) && (u < t)) u++;
udelay(ANALOG_SAITEK_DELAY);
t = gameport_time(gameport, ANALOG_SAITEK_TIME);
gameport_trigger(gameport);
while ((gameport_read(port->gameport) & port->mask) && (v < t)) v++;
while ((gameport_read(port->gameport) & port->mask) && (v < t)) v++;
if (v < (u >> 1)) { /* FIXME - more than one port */
analog_options[0] |= /* FIXME - more than one port */
......@@ -721,7 +721,7 @@ static void analog_parse_options(void)
if (!strcmp(analog_types[j].name, js[i])) {
analog_options[i] = analog_types[j].value;
break;
}
}
if (analog_types[j].name) continue;
analog_options[i] = simple_strtoul(js[i], &end, 0);
......
drivers/input/joystick/cobra.c
View file @ 7e1bfc50
......@@ -72,7 +72,7 @@ static unsigned char cobra_read_packet(struct gameport *gameport, unsigned int *
r[i] = buf[i] = 0;
t[i] = COBRA_MAX_STROBE;
}
local_irq_save(flags);
u = gameport_read(gameport);
......@@ -140,14 +140,14 @@ static void cobra_timer(unsigned long private)
}
mod_timer(&cobra->timer, jiffies + COBRA_REFRESH_TIME);
mod_timer(&cobra->timer, jiffies + COBRA_REFRESH_TIME);
}
static int cobra_open(struct input_dev *dev)
{
struct cobra *cobra = dev->private;
if (!cobra->used++)
mod_timer(&cobra->timer, jiffies + COBRA_REFRESH_TIME);
mod_timer(&cobra->timer, jiffies + COBRA_REFRESH_TIME);
return 0;
}
......@@ -180,7 +180,7 @@ static void cobra_connect(struct gameport *gameport, struct gameport_dev *dev)
cobra->exists = cobra_read_packet(gameport, data);
for (i = 0; i < 2; i++)
for (i = 0; i < 2; i++)
if ((cobra->exists >> i) & data[i] & 1) {
printk(KERN_WARNING "cobra.c: Device %d on %s has the Ext bit set. ID is: %d"
" Contact vojtech@ucw.cz\n", i, gameport->phys, (data[i] >> 2) & 7);
......@@ -205,7 +205,7 @@ static void cobra_connect(struct gameport *gameport, struct gameport_dev *dev)
cobra->dev[i].id.vendor = GAMEPORT_ID_VENDOR_CREATIVE;
cobra->dev[i].id.product = 0x0008;
cobra->dev[i].id.version = 0x0100;
cobra->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
cobra->dev[i].absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
......
drivers/input/joystick/db9.c
View file @ 7e1bfc50
......@@ -14,14 +14,14 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
......@@ -95,7 +95,7 @@ __obsolete_setup("db9_3=");
struct db9 {
struct input_dev dev[DB9_MAX_DEVICES];
struct timer_list timer;
struct pardevice *pd;
struct pardevice *pd;
int mode;
int used;
char phys[2][32];
......@@ -188,7 +188,7 @@ static unsigned char db9_saturn_read_analog(struct parport *port, int type, int
}
/*
* db9_saturn_read_packet() reads whole saturn packet at connector
* db9_saturn_read_packet() reads whole saturn packet at connector
* and returns device identifier code.
*/
static unsigned char db9_saturn_read_packet(struct parport *port, unsigned char *data, int type, int powered)
......@@ -481,16 +481,16 @@ static void db9_timer(unsigned long private)
input_report_abs(dev, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1));
input_report_abs(dev, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1));
parport_write_control(port, 0x0a);
parport_write_control(port, 0x0a);
for (i = 0; i < 7; i++) {
for (i = 0; i < 7; i++) {
data = parport_read_data(port);
parport_write_control(port, 0x02);
parport_write_control(port, 0x0a);
parport_write_control(port, 0x02);
parport_write_control(port, 0x0a);
input_report_key(dev, db9_cd32_btn[i], ~data & DB9_FIRE2);
}
parport_write_control(port, 0x00);
parport_write_control(port, 0x00);
break;
}
......@@ -600,7 +600,7 @@ static struct db9 __init *db9_probe(int *config, int nargs)
db9->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (j = 0; j < db9_buttons[db9->mode]; j++)
set_bit(db9_btn[db9->mode][j], db9->dev[i].keybit);
set_bit(db9_btn[db9->mode][j], db9->dev[i].keybit);
for (j = 0; j < db9_num_axis[db9->mode]; j++) {
set_bit(db9_abs[j], db9->dev[i].absbit);
if (j < 2) {
......@@ -635,7 +635,7 @@ void __exit db9_exit(void)
{
int i, j;
for (i = 0; i < 3; i++)
for (i = 0; i < 3; i++)
if (db9_base[i]) {
for (j = 0; j < min(db9_max_pads[db9_base[i]->mode], DB9_MAX_DEVICES); j++)
input_unregister_device(db9_base[i]->dev + j);
......
drivers/input/joystick/gamecon.c
View file @ 7e1bfc50
......@@ -15,14 +15,14 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
......@@ -70,13 +70,13 @@ __obsolete_setup("gc_3=");
#define GC_NES4 3
#define GC_MULTI 4
#define GC_MULTI2 5
#define GC_N64 6
#define GC_N64 6
#define GC_PSX 7
#define GC_MAX 7
#define GC_REFRESH_TIME HZ/100
struct gc {
struct pardevice *pd;
struct input_dev dev[5];
......@@ -104,7 +104,7 @@ static short gc_n64_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL,
#define GC_N64_DELAY 133 /* delay between transmit request, and response ready (us) */
#define GC_N64_REQUEST 0x1dd1111111ULL /* the request data command (encoded for 000000011) */
#define GC_N64_DWS 3 /* delay between write segments (required for sound playback because of ISA DMA) */
/* GC_N64_DWS > 24 is known to fail */
/* GC_N64_DWS > 24 is known to fail */
#define GC_N64_POWER_W 0xe2 /* power during write (transmit request) */
#define GC_N64_POWER_R 0xfd /* power during read */
#define GC_N64_OUT 0x1d /* output bits to the 4 pads */
......@@ -113,8 +113,8 @@ static short gc_n64_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL,
/* than 123 us */
#define GC_N64_CLOCK 0x02 /* clock bits for read */
/*
* gc_n64_read_packet() reads an N64 packet.
/*
* gc_n64_read_packet() reads an N64 packet.
* Each pad uses one bit per byte. So all pads connected to this port are read in parallel.
*/
......@@ -224,7 +224,7 @@ static void gc_multi_read_packet(struct gc *gc, int length, unsigned char *data)
* http://www.dim.com/~mackys/psxmemcard/ps-eng2.txt
* http://www.gamesx.com/controldata/psxcont/psxcont.htm
* ftp://milano.usal.es/pablo/
*
*
*/
#define GC_PSX_DELAY 25 /* 25 usec */
......@@ -331,13 +331,13 @@ static void gc_timer(unsigned long private)
s = gc_status_bit[i];
if (s & gc->pads[GC_N64] & ~(data[8] | data[9])) {
signed char axes[2];
axes[0] = axes[1] = 0;
for (j = 0; j < 8; j++) {
if (data[23 - j] & s) axes[0] |= 1 << j;
if (data[31 - j] & s) axes[1] |= 1 << j;
if (data[23 - j] & s) axes[0] |= 1 << j;
if (data[31 - j] & s) axes[1] |= 1 << j;
}
input_report_abs(dev + i, ABS_X, axes[0]);
......@@ -588,7 +588,7 @@ static struct gc __init *gc_probe(int *config, int nargs)
break;
case GC_PSX:
psx = gc_psx_read_packet(gc, data);
switch(psx) {
......@@ -629,7 +629,7 @@ static struct gc __init *gc_probe(int *config, int nargs)
}
sprintf(gc->phys[i], "%s/input%d", gc->pd->port->name, i);
gc->dev[i].name = gc_names[config[i + 1]];
gc->dev[i].phys = gc->phys[i];
gc->dev[i].id.bustype = BUS_PARPORT;
......@@ -646,7 +646,7 @@ static struct gc __init *gc_probe(int *config, int nargs)
return NULL;
}
for (i = 0; i < 5; i++)
for (i = 0; i < 5; i++)
if (gc->pads[0] & gc_status_bit[i]) {
input_register_device(gc->dev + i);
printk(KERN_INFO "input: %s on %s\n", gc->dev[i].name, gc->pd->port->name);
......@@ -675,7 +675,7 @@ void __exit gc_exit(void)
if (gc_base[i]) {
for (j = 0; j < 5; j++)
if (gc_base[i]->pads[0] & gc_status_bit[j])
input_unregister_device(gc_base[i]->dev + j);
input_unregister_device(gc_base[i]->dev + j);
parport_unregister_device(gc_base[i]->pd);
}
}
......
drivers/input/joystick/gf2k.c
View file @ 7e1bfc50
......@@ -11,18 +11,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -223,7 +223,7 @@ static int gf2k_open(struct input_dev *dev)
{
struct gf2k *gf2k = dev->private;
if (!gf2k->used++)
mod_timer(&gf2k->timer, jiffies + GF2K_REFRESH);
mod_timer(&gf2k->timer, jiffies + GF2K_REFRESH);
return 0;
}
......@@ -324,7 +324,7 @@ static void gf2k_connect(struct gameport *gameport, struct gameport_dev *dev)
for (i = 0; i < gf2k_axes[gf2k->id]; i++) {
gf2k->dev.absmax[gf2k_abs[i]] = (i < 2) ? gf2k->dev.abs[gf2k_abs[i]] * 2 - 32 :
gf2k->dev.abs[gf2k_abs[0]] + gf2k->dev.abs[gf2k_abs[1]] - 32;
gf2k->dev.abs[gf2k_abs[0]] + gf2k->dev.abs[gf2k_abs[1]] - 32;
gf2k->dev.absmin[gf2k_abs[i]] = 32;
gf2k->dev.absfuzz[gf2k_abs[i]] = 8;
gf2k->dev.absflat[gf2k_abs[i]] = (i < 2) ? 24 : 0;
......
drivers/input/joystick/grip.c
View file @ 7e1bfc50
......@@ -48,8 +48,8 @@ MODULE_LICENSE("GPL");
#define GRIP_STROBE_GPP 200 /* 200 us */
#define GRIP_LENGTH_XT 4
#define GRIP_STROBE_XT 64 /* 64 us */
#define GRIP_MAX_CHUNKS_XT 10
#define GRIP_MAX_BITS_XT 30
#define GRIP_MAX_CHUNKS_XT 10
#define GRIP_MAX_BITS_XT 30
#define GRIP_REFRESH_TIME HZ/50 /* 20 ms */
......@@ -153,7 +153,7 @@ static int grip_xt_read_packet(struct gameport *gameport, int shift, unsigned in
buf = (buf << 1) | (u >> 1);
t = strobe;
i++;
} else
} else
if ((((u ^ v) & (v ^ w)) >> 1) & ~(u | v | w) & 1) {
if (i == 20) {
......
drivers/input/joystick/grip_mp.c
View file @ 7e1bfc50
......@@ -69,7 +69,7 @@ struct grip_mp {
#define IO_MODE_FAST 0x0200 /* Used 3 data bits per gameport read */
#define IO_SLOT_CHANGE 0x0800 /* Multiport physical slot status changed */
#define IO_DONE 0x1000 /* Multiport is done sending packets */
#define IO_RETRY 0x4000 /* Try again later to get packet */
#define IO_RETRY 0x4000 /* Try again later to get packet */
#define IO_RESET 0x8000 /* Force multiport to resend all packets */
/*
......@@ -144,8 +144,8 @@ static inline int poll_until(u8 onbits, u8 offbits, int u_sec, struct gameport*
/*
* Gets a 28-bit packet from the multiport.
*
* After getting a packet successfully, commands encoded by sendcode may
* be sent to the multiport.
* After getting a packet successfully, commands encoded by sendcode may
* be sent to the multiport.
*
* The multiport clock value is reflected in gameport bit B4.
*
......@@ -169,7 +169,7 @@ static int mp_io(struct gameport* gameport, int sendflags, int sendcode, u32 *pa
*packet = 0;
raw_data = gameport_read(gameport);
if (raw_data & 1)
if (raw_data & 1)
return IO_RETRY;
for (i = 0; i < 64; i++) {
......@@ -183,11 +183,11 @@ static int mp_io(struct gameport* gameport, int sendflags, int sendcode, u32 *pa
if (raw_data & 0x31)
return IO_RESET;
gameport_trigger(gameport);
gameport_trigger(gameport);
if (!poll_until(0x10, 0, 308, gameport, &raw_data))
return IO_RESET;
} else
} else
return IO_RETRY;
/* Determine packet transfer mode and prepare for packet construction. */
......@@ -195,7 +195,7 @@ static int mp_io(struct gameport* gameport, int sendflags, int sendcode, u32 *pa
if (raw_data & 0x20) { /* 3 data bits/read */
portvals |= raw_data >> 4; /* Compare B4-B7 before & after trigger */
if (portvals != 0xb)
if (portvals != 0xb)
return 0;
data_mask = 7;
bits_per_read = 3;
......@@ -221,7 +221,7 @@ static int mp_io(struct gameport* gameport, int sendflags, int sendcode, u32 *pa
return IO_RESET;
}
if (raw_data)
if (raw_data)
return IO_RESET;
/* If 3 bits/read used, drop from 30 bits to 28. */
......@@ -231,7 +231,7 @@ static int mp_io(struct gameport* gameport, int sendflags, int sendcode, u32 *pa
pkt = (pkt >> 2) | 0xf0000000;
}
if (bit_parity(pkt) == 1)
if (bit_parity(pkt) == 1)
return IO_RESET;
/* Acknowledge packet receipt */
......@@ -251,10 +251,10 @@ static int mp_io(struct gameport* gameport, int sendflags, int sendcode, u32 *pa
/* Return if we just wanted the packet or multiport wants to send more */
*packet = pkt;
*packet = pkt;
if ((sendflags == 0) || ((sendflags & IO_RETRY) && !(pkt & PACKET_MP_DONE)))
return IO_GOT_PACKET;
if (pkt & PACKET_MP_MORE)
return IO_GOT_PACKET | IO_RETRY;
......@@ -277,7 +277,7 @@ static int mp_io(struct gameport* gameport, int sendflags, int sendcode, u32 *pa
if (!poll_until(0x30, 0, 193, gameport, &raw_data))
return IO_GOT_PACKET | IO_RESET;
if (raw_data & 1)
if (raw_data & 1)
return IO_GOT_PACKET | IO_RESET;
if (sendcode & 1)
......@@ -429,19 +429,19 @@ static int get_and_decode_packet(struct grip_mp *grip, int flags)
strange_code = joytype;
}
}
return flags;
return flags;
}
/*
* Returns true if all multiport slot states appear valid.
*/
static int slots_valid(struct grip_mp *grip)
{
int flags, slot, invalid = 0, active = 0;
flags = get_and_decode_packet(grip, 0);
if (!(flags & IO_GOT_PACKET))
if (!(flags & IO_GOT_PACKET))
return 0;
for (slot = 0; slot < 4; slot++) {
......@@ -463,7 +463,7 @@ static int slots_valid(struct grip_mp *grip)
* Returns whether the multiport was placed into digital mode and
* able to communicate its state successfully.
*/
static int multiport_init(struct grip_mp *grip)
{
int dig_mode, initialized = 0, tries = 0;
......@@ -481,7 +481,7 @@ static int multiport_init(struct grip_mp *grip)
dbg("multiport_init(): unable to achieve digital mode.\n");
return 0;
}
/* Get packets, store multiport state, and check state's validity */
for (tries = 0; tries < 4096; tries++) {
if ( slots_valid(grip) ) {
......@@ -520,9 +520,9 @@ static void report_slot(struct grip_mp *grip, int slot)
}
/*
* Get the multiport state.
* Get the multiport state.
*/
static void get_and_report_mp_state(struct grip_mp *grip)
{
int i, npkts, flags;
......@@ -538,7 +538,7 @@ static void get_and_report_mp_state(struct grip_mp *grip)
break;
}
for (i = 0; i < 4; i++)
for (i = 0; i < 4; i++)
if (grip->dirty[i])
report_slot(grip, i);
}
......@@ -546,7 +546,7 @@ static void get_and_report_mp_state(struct grip_mp *grip)
/*
* Called when a joystick device file is opened
*/
static int grip_open(struct input_dev *dev)
{
struct grip_mp *grip = dev->private;
......@@ -607,7 +607,7 @@ static void register_slot(int slot, struct grip_mp *grip)
/*
* Repeatedly polls the multiport and generates events.
*/
static void grip_timer(unsigned long private)
{
struct grip_mp *grip = (void*) private;
......
drivers/input/joystick/guillemot.c
View file @ 7e1bfc50
......@@ -45,7 +45,7 @@ MODULE_LICENSE("GPL");
#define GUILLEMOT_MAX_LENGTH 17 /* 17 bytes */
#define GUILLEMOT_REFRESH_TIME HZ/50 /* 20 ms */
static short guillemot_abs_pad[] =
static short guillemot_abs_pad[] =
{ ABS_X, ABS_Y, ABS_THROTTLE, ABS_RUDDER, -1 };
static short guillemot_btn_pad[] =
......@@ -160,7 +160,7 @@ static int guillemot_open(struct input_dev *dev)
{
struct guillemot *guillemot = dev->private;
if (!guillemot->used++)
mod_timer(&guillemot->timer, jiffies + GUILLEMOT_REFRESH_TIME);
mod_timer(&guillemot->timer, jiffies + GUILLEMOT_REFRESH_TIME);
return 0;
}
......@@ -211,7 +211,7 @@ static void guillemot_connect(struct gameport *gameport, struct gameport_dev *de
if (!guillemot_type[i].name) {
printk(KERN_WARNING "guillemot.c: Unknown joystick on %s. [ %02x%02x:%04x, ver %d.%02d ]\n",
gameport->phys, data[12], data[13], data[11], data[14], data[15]);
goto fail2;
goto fail2;
}
sprintf(guillemot->phys, "%s/input0", gameport->phys);
......@@ -237,7 +237,7 @@ static void guillemot_connect(struct gameport *gameport, struct gameport_dev *de
guillemot->dev.absmax[t] = 255;
}
if (guillemot->type->hat)
if (guillemot->type->hat)
for (i = 0; i < 2; i++) {
t = ABS_HAT0X + i;
set_bit(t, guillemot->dev.absbit);
......
drivers/input/joystick/iforce/Kconfig
View file @ 7e1bfc50
......@@ -17,7 +17,7 @@ config JOYSTICK_IFORCE_USB
depends on JOYSTICK_IFORCE && (JOYSTICK_IFORCE=m || USB=y) && USB
help
Say Y here if you have an I-Force joystick or steering wheel
connected to your USB port.
connected to your USB port.
config JOYSTICK_IFORCE_232
bool "I-Force Serial joysticks and wheels"
......
drivers/input/joystick/iforce/Makefile
View file @ 7e1bfc50
......@@ -7,14 +7,14 @@
# Goal definition
iforce-objs := iforce-ff.o iforce-main.o iforce-packets.o
obj-$(CONFIG_JOYSTICK_IFORCE) += iforce.o
obj-$(CONFIG_JOYSTICK_IFORCE) += iforce.o
ifeq ($(CONFIG_JOYSTICK_IFORCE_232),y)
iforce-objs += iforce-serio.o
iforce-objs += iforce-serio.o
endif
ifeq ($(CONFIG_JOYSTICK_IFORCE_USB),y)
iforce-objs += iforce-usb.o
iforce-objs += iforce-usb.o
endif
EXTRA_CFLAGS = -Werror-implicit-function-declaration
drivers/input/joystick/iforce/iforce-ff.c
View file @ 7e1bfc50
......@@ -195,7 +195,7 @@ static unsigned char find_button(struct iforce *iforce, signed short button)
}
/*
* Analyse the changes in an effect, and tell if we need to send an condition
* Analyse the changes in an effect, and tell if we need to send an condition
* parameter packet
*/
static int need_condition_modifier(struct iforce* iforce, struct ff_effect* new)
......@@ -372,7 +372,7 @@ int iforce_upload_periodic(struct iforce* iforce, struct ff_effect* effect, int
int core_err = 0;
if (!is_update || need_period_modifier(iforce, effect)) {
param1_err = make_period_modifier(iforce, mod1_chunk,
param1_err = make_period_modifier(iforce, mod1_chunk,
is_update,
effect->u.periodic.magnitude, effect->u.periodic.offset,
effect->u.periodic.period, effect->u.periodic.phase);
......
drivers/input/joystick/iforce/iforce-main.c
View file @ 7e1bfc50
......@@ -166,7 +166,7 @@ static int iforce_upload_effect(struct input_dev *dev, struct ff_effect *effect)
else {
/* We want to update an effect */
if (!CHECK_OWNERSHIP(effect->id, iforce)) return -EACCES;
/* Parameter type cannot be updated */
if (effect->type != iforce->core_effects[effect->id].effect.type)
return -EINVAL;
......@@ -273,7 +273,7 @@ static int iforce_flush(struct input_dev *dev, struct file *file)
if (test_bit(FF_CORE_IS_USED, iforce->core_effects[i].flags) &&
current->pid == iforce->core_effects[i].owner) {
/* Stop effect */
input_report_ff(dev, i, 0);
......
drivers/input/joystick/iforce/iforce-packets.c
View file @ 7e1bfc50
......@@ -56,7 +56,7 @@ int iforce_send_packet(struct iforce *iforce, u16 cmd, unsigned char* data)
int empty;
int head, tail;
unsigned long flags;
/*
* Update head and tail of xmit buffer
*/
......@@ -108,7 +108,7 @@ int iforce_send_packet(struct iforce *iforce, u16 cmd, unsigned char* data)
break;
#endif
#ifdef CONFIG_JOYSTICK_IFORCE_USB
case IFORCE_USB:
case IFORCE_USB:
if (iforce->usbdev && empty &&
!test_and_set_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags)) {
......
drivers/input/joystick/iforce/iforce-serio.c
View file @ 7e1bfc50
......@@ -62,7 +62,7 @@ void iforce_serial_xmit(struct iforce *iforce)
cs ^= iforce->xmit.buf[iforce->xmit.tail];
XMIT_INC(iforce->xmit.tail, 1);
}
serio_write(iforce->serio, cs);
if (test_and_clear_bit(IFORCE_XMIT_AGAIN, iforce->xmit_flags))
......
drivers/input/joystick/iforce/iforce.h
View file @ 7e1bfc50
......@@ -141,7 +141,7 @@ struct iforce {
struct circ_buf xmit;
unsigned char xmit_data[XMIT_SIZE];
long xmit_flags[1];
/* Force Feedback */
wait_queue_head_t wait;
struct resource device_memory;
......
drivers/input/joystick/interact.c
View file @ 7e1bfc50
......@@ -63,7 +63,7 @@ struct interact {
char phys[32];
};
static short interact_abs_hhfx[] =
static short interact_abs_hhfx[] =
{ ABS_RX, ABS_RY, ABS_X, ABS_Y, ABS_HAT0X, ABS_HAT0Y, -1 };
static short interact_abs_pp8d[] =
{ ABS_X, ABS_Y, -1 };
......@@ -166,7 +166,7 @@ static void interact_timer(unsigned long private)
case INTERACT_TYPE_PP8D:
for (i = 0; i < 2; i++)
input_report_abs(dev, interact_abs_pp8d[i],
input_report_abs(dev, interact_abs_pp8d[i],
((data[0] >> ((i << 1) + 20)) & 1) - ((data[0] >> ((i << 1) + 21)) & 1));
for (i = 0; i < 8; i++)
......@@ -190,7 +190,7 @@ static int interact_open(struct input_dev *dev)
{
struct interact *interact = dev->private;
if (!interact->used++)
mod_timer(&interact->timer, jiffies + INTERACT_REFRESH_TIME);
mod_timer(&interact->timer, jiffies + INTERACT_REFRESH_TIME);
return 0;
}
......@@ -242,7 +242,7 @@ static void interact_connect(struct gameport *gameport, struct gameport_dev *dev
if (!interact_type[i].length) {
printk(KERN_WARNING "interact.c: Unknown joystick on %s. [len %d d0 %08x d1 %08x i2 %08x]\n",
gameport->phys, i, data[0], data[1], data[2]);
goto fail2;
goto fail2;
}
sprintf(interact->phys, "%s/input0", gameport->phys);
......
drivers/input/joystick/joydump.c
View file @ 7e1bfc50
......@@ -12,18 +12,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -63,7 +63,7 @@ static void __devinit joydump_connect(struct gameport *gameport, struct gameport
printk(KERN_INFO "joydump: | Raw mode not available - trying cooked. |\n");
if (gameport_open(gameport, dev, GAMEPORT_MODE_COOKED)) {
printk(KERN_INFO "joydump: | Cooked not available either. Failing. |\n");
printk(KERN_INFO "joydump: `-------------------- END -------------------'\n");
return;
......
drivers/input/joystick/magellan.c
View file @ 7e1bfc50
......@@ -11,18 +11,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -159,7 +159,7 @@ static void magellan_connect(struct serio *serio, struct serio_dev *dev)
memset(magellan, 0, sizeof(struct magellan));
magellan->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
magellan->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (i = 0; i < 9; i++)
set_bit(magellan_buttons[i], magellan->dev.keybit);
......@@ -181,7 +181,7 @@ static void magellan_connect(struct serio *serio, struct serio_dev *dev)
magellan->dev.id.vendor = SERIO_MAGELLAN;
magellan->dev.id.product = 0x0001;
magellan->dev.id.version = 0x0100;
serio->private = magellan;
if (serio_open(serio, dev)) {
......
drivers/input/joystick/sidewinder.c
View file @ 7e1bfc50
......@@ -11,18 +11,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -176,19 +176,19 @@ static int sw_read_packet(struct gameport *gameport, unsigned char *buf, int len
buf[i] = v >> 5; /* Store it */
i++; /* Advance index */
bitout = strobe; /* Extend timeout for next bit */
}
}
if (kick && (~v & u & 0x01)) { /* Falling edge on axis 0 */
sched = kick; /* Schedule second trigger */
kick = 0; /* Don't schedule next time on falling edge */
pending = 1; /* Mark schedule */
}
}
if (pending && sched < 0 && (i > -SW_END)) { /* Second trigger time */
gameport_trigger(gameport); /* Trigger */
bitout = start; /* Long bit timeout */
pending = 0; /* Unmark schedule */
timeout = 0; /* Switch from global to bit timeouts */
timeout = 0; /* Switch from global to bit timeouts */
}
}
......@@ -482,14 +482,14 @@ static int sw_read(struct sw *sw)
sw_read_packet(sw->gameport, buf, SW_LENGTH, i); /* Read ID packet, this initializes the stick */
sw->fail = SW_FAIL;
return -1;
}
static void sw_timer(unsigned long private)
{
struct sw *sw = (void *) private;
sw->reads++;
if (sw_read(sw)) sw->bads++;
mod_timer(&sw->timer, jiffies + SW_REFRESH);
......@@ -653,7 +653,7 @@ static void sw_connect(struct gameport *gameport, struct gameport_dev *dev)
case 60:
sw->number++;
case 45: /* Ambiguous packet length */
if (j <= 40) { /* ID length less or eq 40 -> FSP */
if (j <= 40) { /* ID length less or eq 40 -> FSP */
case 43:
sw->type = SW_ID_FSP;
break;
......
drivers/input/joystick/spaceball.c
View file @ 7e1bfc50
......@@ -15,18 +15,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -59,8 +59,8 @@ MODULE_LICENSE("GPL");
static int spaceball_axes[] = { ABS_X, ABS_Z, ABS_Y, ABS_RX, ABS_RZ, ABS_RY };
static char *spaceball_names[] = {
"?", "SpaceTec SpaceBall 1003", "SpaceTec SpaceBall 2003", "SpaceTec SpaceBall 2003B",
"SpaceTec SpaceBall 2003C", "SpaceTec SpaceBall 3003", "SpaceTec SpaceBall SpaceController",
"?", "SpaceTec SpaceBall 1003", "SpaceTec SpaceBall 2003", "SpaceTec SpaceBall 2003B",
"SpaceTec SpaceBall 2003C", "SpaceTec SpaceBall 3003", "SpaceTec SpaceBall SpaceController",
"SpaceTec SpaceBall 3003C", "SpaceTec SpaceBall 4000FLX", "SpaceTec SpaceBall 4000FLX Lefty" };
/*
......@@ -96,7 +96,7 @@ static void spaceball_process_packet(struct spaceball* spaceball, struct pt_regs
case 'D': /* Ball data */
if (spaceball->idx != 15) return;
for (i = 0; i < 6; i++)
input_report_abs(dev, spaceball_axes[i],
input_report_abs(dev, spaceball_axes[i],
(__s16)((data[2 * i + 3] << 8) | data[2 * i + 2]));
break;
......@@ -216,7 +216,7 @@ static void spaceball_connect(struct serio *serio, struct serio_dev *dev)
return;
memset(spaceball, 0, sizeof(struct spaceball));
spaceball->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
spaceball->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
switch (id) {
case SPACEBALL_4000FLX:
......@@ -224,7 +224,7 @@ static void spaceball_connect(struct serio *serio, struct serio_dev *dev)
spaceball->dev.keybit[LONG(BTN_0)] |= BIT(BTN_9);
spaceball->dev.keybit[LONG(BTN_A)] |= BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_MODE);
default:
spaceball->dev.keybit[LONG(BTN_0)] |= BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4)
spaceball->dev.keybit[LONG(BTN_0)] |= BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4)
| BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7) | BIT(BTN_8);
case SPACEBALL_3003C:
spaceball->dev.keybit[LONG(BTN_0)] |= BIT(BTN_1) | BIT(BTN_8);
......@@ -251,7 +251,7 @@ static void spaceball_connect(struct serio *serio, struct serio_dev *dev)
spaceball->dev.id.vendor = SERIO_SPACEBALL;
spaceball->dev.id.product = id;
spaceball->dev.id.version = 0x0100;
serio->private = spaceball;
if (serio_open(serio, dev)) {
......
drivers/input/joystick/spaceorb.c
View file @ 7e1bfc50
......@@ -2,7 +2,7 @@
* $Id: spaceorb.c,v 1.15 2002/01/22 20:29:19 vojtech Exp $
*
* Copyright (c) 1999-2001 Vojtech Pavlik
*
*
* Based on the work of:
* David Thompson
*/
......@@ -14,18 +14,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -67,7 +67,7 @@ struct spaceorb {
static unsigned char spaceorb_xor[] = "SpaceWare";
static unsigned char *spaceorb_errors[] = { "EEPROM storing 0 failed", "Receive queue overflow", "Transmit queue timeout",
"Bad packet", "Power brown-out", "EEPROM checksum error", "Hardware fault" };
"Bad packet", "Power brown-out", "EEPROM checksum error", "Hardware fault" };
/*
* spaceorb_process_packet() decodes packets the driver receives from the
......@@ -99,7 +99,7 @@ static void spaceorb_process_packet(struct spaceorb *spaceorb, struct pt_regs *r
case 'D': /* Ball + button data */
if (spaceorb->idx != 12) return;
for (i = 0; i < 9; i++) spaceorb->data[i+2] ^= spaceorb_xor[i];
for (i = 0; i < 9; i++) spaceorb->data[i+2] ^= spaceorb_xor[i];
axes[0] = ( data[2] << 3) | (data[ 3] >> 4);
axes[1] = ((data[3] & 0x0f) << 6) | (data[ 4] >> 1);
axes[2] = ((data[4] & 0x01) << 9) | (data[ 5] << 2) | (data[4] >> 5);
......@@ -174,7 +174,7 @@ static void spaceorb_connect(struct serio *serio, struct serio_dev *dev)
return;
memset(spaceorb, 0, sizeof(struct spaceorb));
spaceorb->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
spaceorb->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (i = 0; i < 6; i++)
set_bit(spaceorb_buttons[i], spaceorb->dev.keybit);
......@@ -198,7 +198,7 @@ static void spaceorb_connect(struct serio *serio, struct serio_dev *dev)
spaceorb->dev.id.vendor = SERIO_SPACEORB;
spaceorb->dev.id.product = 0x0001;
spaceorb->dev.id.version = 0x0100;
serio->private = spaceorb;
if (serio_open(serio, dev)) {
......
drivers/input/joystick/stinger.c
View file @ 7e1bfc50
......@@ -147,7 +147,7 @@ static void stinger_connect(struct serio *serio, struct serio_dev *dev)
memset(stinger, 0, sizeof(struct stinger));
stinger->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
stinger->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
stinger->dev.keybit[LONG(BTN_A)] = BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_X) | \
BIT(BTN_Y) | BIT(BTN_Z) | BIT(BTN_TL) | BIT(BTN_TR) | \
BIT(BTN_START) | BIT(BTN_SELECT);
......@@ -164,8 +164,8 @@ static void stinger_connect(struct serio *serio, struct serio_dev *dev)
stinger->dev.id.version = 0x0100;
for (i = 0; i < 2; i++) {
stinger->dev.absmax[ABS_X+i] = 64;
stinger->dev.absmin[ABS_X+i] = -64;
stinger->dev.absmax[ABS_X+i] = 64;
stinger->dev.absmin[ABS_X+i] = -64;
stinger->dev.absflat[ABS_X+i] = 4;
}
......
drivers/input/joystick/tmdc.c
View file @ 7e1bfc50
......@@ -4,7 +4,7 @@
* Copyright (c) 1998-2001 Vojtech Pavlik
*
* Based on the work of:
* Trystan Larey-Williams
* Trystan Larey-Williams
*/
/*
......@@ -14,18 +14,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -58,7 +58,7 @@ MODULE_LICENSE("GPL");
#define TMDC_BYTE_REV 11
#define TMDC_BYTE_DEF 12
#define TMDC_ABS 7
#define TMDC_ABS 7
#define TMDC_ABS_HAT 4
#define TMDC_BTN 16
......@@ -104,7 +104,7 @@ struct tmdc {
unsigned char btno[2][4];
int used;
int reads;
int bads;
int bads;
unsigned char exists;
};
......@@ -127,7 +127,7 @@ static int tmdc_read_packet(struct gameport *gameport, unsigned char data[2][TMD
local_irq_save(flags);
gameport_trigger(gameport);
w = gameport_read(gameport) >> 4;
do {
......@@ -148,7 +148,7 @@ static int tmdc_read_packet(struct gameport *gameport, unsigned char data[2][TMD
}
data[k][i[k]] |= (~v & 1) << (j[k]++ - 1); /* Data bit */
}
t[k]--;
t[k]--;
}
} while (t[0] > 0 || t[1] > 0);
......@@ -175,7 +175,7 @@ static void tmdc_timer(unsigned long private)
bad = 1;
else
for (j = 0; j < 2; j++)
for (j = 0; j < 2; j++)
if (r & (1 << j) & tmdc->exists) {
if (data[j][TMDC_BYTE_ID] != tmdc->mode[j]) {
......@@ -227,7 +227,7 @@ static int tmdc_open(struct input_dev *dev)
{
struct tmdc *tmdc = dev->private;
if (!tmdc->used++)
mod_timer(&tmdc->timer, jiffies + TMDC_REFRESH_TIME);
mod_timer(&tmdc->timer, jiffies + TMDC_REFRESH_TIME);
return 0;
}
......@@ -356,7 +356,7 @@ static void tmdc_disconnect(struct gameport *gameport)
struct tmdc *tmdc = gameport->private;
int i;
for (i = 0; i < 2; i++)
if (tmdc->exists & (1 << i))
if (tmdc->exists & (1 << i))
input_unregister_device(tmdc->dev + i);
gameport_close(gameport);
kfree(tmdc);
......
drivers/input/joystick/turbografx.c
View file @ 7e1bfc50
......@@ -14,18 +14,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -65,7 +65,7 @@ __obsolete_setup("tgfx_3=");
#define TGFX_TRIGGER 0x08
#define TGFX_UP 0x10
#define TGFX_DOWN 0x20
#define TGFX_DOWN 0x20
#define TGFX_LEFT 0x40
#define TGFX_RIGHT 0x80
......@@ -126,7 +126,7 @@ static int tgfx_open(struct input_dev *dev)
if (!tgfx->used++) {
parport_claim(tgfx->pd);
parport_write_control(tgfx->pd->port, 0x04);
mod_timer(&tgfx->timer, jiffies + TGFX_REFRESH_TIME);
mod_timer(&tgfx->timer, jiffies + TGFX_REFRESH_TIME);
}
return 0;
}
......@@ -173,7 +173,7 @@ static struct tgfx __init *tgfx_probe(int *config, int nargs)
memset(tgfx, 0, sizeof(struct tgfx));
tgfx->pd = parport_register_device(pp, "turbografx", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
parport_put_port(pp);
if (!tgfx->pd) {
......@@ -210,7 +210,7 @@ static struct tgfx __init *tgfx_probe(int *config, int nargs)
tgfx->dev[i].absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
for (j = 0; j < config[i+1]; j++)
set_bit(tgfx_buttons[j], tgfx->dev[i].keybit);
set_bit(tgfx_buttons[j], tgfx->dev[i].keybit);
tgfx->dev[i].absmin[ABS_X] = -1; tgfx->dev[i].absmax[ABS_X] = 1;
tgfx->dev[i].absmin[ABS_Y] = -1; tgfx->dev[i].absmax[ABS_Y] = 1;
......@@ -225,7 +225,7 @@ static struct tgfx __init *tgfx_probe(int *config, int nargs)
kfree(tgfx);
return NULL;
}
return tgfx;
}
......@@ -245,7 +245,7 @@ void __exit tgfx_exit(void)
{
int i, j;
for (i = 0; i < 3; i++)
for (i = 0; i < 3; i++)
if (tgfx_base[i]) {
for (j = 0; j < 7; j++)
if (tgfx_base[i]->sticks & (1 << j))
......
drivers/input/joystick/twidjoy.c
View file @ 7e1bfc50
......@@ -58,6 +58,9 @@
#include <linux/serio.h>
#include <linux/init.h>
MODULE_DESCRIPTION("Handykey Twiddler keyboard as a joystick driver");
MODULE_LICENSE("GPL");
/*
* Constants.
*/
......@@ -142,7 +145,7 @@ static void twidjoy_process_packet(struct twidjoy *twidjoy, struct pt_regs *regs
* packet processing routine.
*/
static void twidjoy_interrupt(struct serio *serio, unsigned char data, unsigned int flags, struc pt_regs *regs)
static irqreturn_t twidjoy_interrupt(struct serio *serio, unsigned char data, unsigned int flags, struct pt_regs *regs)
{
struct twidjoy *twidjoy = serio->private;
......@@ -153,7 +156,7 @@ static void twidjoy_interrupt(struct serio *serio, unsigned char data, unsigned
if ((data & 0x80) == 0)
twidjoy->idx = 0; /* this byte starts a new packet */
else if (twidjoy->idx == 0)
return; /* wrong MSB -- ignore this byte */
return IRQ_HANDLED; /* wrong MSB -- ignore this byte */
if (twidjoy->idx < TWIDJOY_MAX_LENGTH)
twidjoy->data[twidjoy->idx++] = data;
......@@ -163,7 +166,7 @@ static void twidjoy_interrupt(struct serio *serio, unsigned char data, unsigned
twidjoy->idx = 0;
}
return;
return IRQ_HANDLED;
}
/*
......@@ -208,7 +211,7 @@ static void twidjoy_connect(struct serio *serio, struct serio_dev *dev)
twidjoy->dev.id.product = 0x0001;
twidjoy->dev.id.version = 0x0100;
twidjoy->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
twidjoy->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (bp = twidjoy_buttons; bp->bitmask; bp++) {
for (i = 0; i < bp->bitmask; i++)
......@@ -218,8 +221,8 @@ static void twidjoy_connect(struct serio *serio, struct serio_dev *dev)
twidjoy->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
for (i = 0; i < 2; i++) {
twidjoy->dev.absmax[ABS_X+i] = 50;
twidjoy->dev.absmin[ABS_X+i] = -50;
twidjoy->dev.absmax[ABS_X+i] = 50;
twidjoy->dev.absmin[ABS_X+i] = -50;
/* TODO: arndt 20010708: Are these values appropriate? */
twidjoy->dev.absfuzz[ABS_X+i] = 4;
......
drivers/input/joystick/warrior.c
View file @ 7e1bfc50
......@@ -11,18 +11,18 @@
/*
* This program is free warftware; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -44,7 +44,7 @@ MODULE_LICENSE("GPL");
*/
#define WARRIOR_MAX_LENGTH 16
static char warrior_lengths[] = { 0, 4, 12, 3, 4, 4, 0, 0 };
static char warrior_lengths[] = { 0, 4, 12, 3, 4, 4, 0, 0 };
static char *warrior_name = "Logitech WingMan Warrior";
/*
......@@ -114,7 +114,7 @@ static irqreturn_t warrior_interrupt(struct serio *serio,
warrior->data[warrior->idx++] = data;
if (warrior->idx == warrior->len) {
if (warrior->idx) warrior_process_packet(warrior, regs);
if (warrior->idx) warrior_process_packet(warrior, regs);
warrior->idx = 0;
warrior->len = 0;
}
......@@ -152,7 +152,7 @@ static void warrior_connect(struct serio *serio, struct serio_dev *dev)
memset(warrior, 0, sizeof(struct warrior));
warrior->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS);
warrior->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS);
warrior->dev.keybit[LONG(BTN_TRIGGER)] = BIT(BTN_TRIGGER) | BIT(BTN_THUMB) | BIT(BTN_TOP) | BIT(BTN_TOP2);
warrior->dev.relbit[0] = BIT(REL_DIAL);
warrior->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_THROTTLE) | BIT(ABS_HAT0X) | BIT(ABS_HAT0Y);
......@@ -168,24 +168,24 @@ static void warrior_connect(struct serio *serio, struct serio_dev *dev)
warrior->dev.id.version = 0x0100;
for (i = 0; i < 2; i++) {
warrior->dev.absmax[ABS_X+i] = -64;
warrior->dev.absmin[ABS_X+i] = 64;
warrior->dev.absflat[ABS_X+i] = 8;
warrior->dev.absmax[ABS_X+i] = -64;
warrior->dev.absmin[ABS_X+i] = 64;
warrior->dev.absflat[ABS_X+i] = 8;
}
warrior->dev.absmax[ABS_THROTTLE] = -112;
warrior->dev.absmin[ABS_THROTTLE] = 112;
warrior->dev.absmax[ABS_THROTTLE] = -112;
warrior->dev.absmin[ABS_THROTTLE] = 112;
for (i = 0; i < 2; i++) {
warrior->dev.absmax[ABS_HAT0X+i] = -1;
warrior->dev.absmin[ABS_HAT0X+i] = 1;
warrior->dev.absmax[ABS_HAT0X+i] = -1;
warrior->dev.absmin[ABS_HAT0X+i] = 1;
}
warrior->dev.private = warrior;
serio->private = warrior;
if (serio_open(serio, dev)) {
if (serio_open(serio, dev)) {
kfree(warrior);
return;
}
......
drivers/input/keyboard/98kbd.c
View file @ 7e1bfc50
......@@ -12,18 +12,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
*/
#include <linux/delay.h>
......@@ -43,7 +43,7 @@ MODULE_LICENSE("GPL");
#define KBD98_KEY 0x7f
#define KBD98_RELEASE 0x80
static unsigned char kbd98_keycode[256] = {
static unsigned char kbd98_keycode[256] = {
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 43, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 41, 26, 28, 30, 31, 32,
33, 34, 35, 36, 37, 38, 39, 40, 27, 44, 45, 46, 47, 48, 49, 50,
......@@ -109,8 +109,8 @@ struct kbd98 {
struct jis_kbd_conv jis[16];
};
void kbd98_interrupt(struct serio *serio, unsigned char data,
unsigned int flags, struct pt_regs *regs)
irqreturn_t kbd98_interrupt(struct serio *serio, unsigned char data,
unsigned int flags, struct pt_regs *regs)
{
struct kbd98 *kbd98 = serio->private;
unsigned char scancode, keycode;
......@@ -119,15 +119,15 @@ void kbd98_interrupt(struct serio *serio, unsigned char data,
switch (data) {
case KBD98_RET_ACK:
kbd98->ack = 1;
return;
goto out;
case KBD98_RET_NAK:
kbd98->ack = -1;
return;
goto out;
}
if (kbd98->cmdcnt) {
kbd98->cmdbuf[--kbd98->cmdcnt] = data;
return;
goto out;
}
scancode = data & KBD98_KEY;
......@@ -164,7 +164,7 @@ void kbd98_interrupt(struct serio *serio, unsigned char data,
keycode = kbd98->jis[i].emul[kbd98->shift].keycode;
if (keycode == KBD98_KEY_NULL)
return;
break;
if (press) {
kbd98->emul.scancode = scancode;
......@@ -187,27 +187,31 @@ void kbd98_interrupt(struct serio *serio, unsigned char data,
}
input_sync(&kbd98->dev);
return;
break;
case KEY_CAPSLOCK:
input_report_key(&kbd98->dev, keycode, 1);
input_sync(&kbd98->dev);
input_report_key(&kbd98->dev, keycode, 0);
input_sync(&kbd98->dev);
return;
break;
case KBD98_KEY_NULL:
return;
break;
case 0:
printk(KERN_WARNING "kbd98.c: Unknown key (scancode %#x) %s.\n",
data & KBD98_KEY, data & KBD98_RELEASE ? "released" : "pressed");
return;
break;
default:
input_report_key(&kbd98->dev, keycode, press);
input_sync(&kbd98->dev);
}
break;
}
out:
return IRQ_HANDLED;
}
/*
......@@ -243,7 +247,7 @@ static int kbd98_command(struct kbd98 *kbd98, unsigned char *param, int command)
int i;
kbd98->cmdcnt = receive;
if (command & 0xff)
if (kbd98_sendbyte(kbd98, command & 0xff))
return (kbd98->cmdcnt = 0) - 1;
......@@ -258,7 +262,7 @@ static int kbd98_command(struct kbd98 *kbd98, unsigned char *param, int command)
for (i = 0; i < receive; i++)
param[i] = kbd98->cmdbuf[(receive - 1) - i];
if (kbd98->cmdcnt)
if (kbd98->cmdcnt)
return (kbd98->cmdcnt = 0) - 1;
return 0;
......@@ -318,7 +322,7 @@ void kbd98_connect(struct serio *serio, struct serio_dev *dev)
memset(kbd98, 0, sizeof(struct kbd98));
kbd98->emul.scancode = KBD98_KEY_UNKNOWN;
kbd98->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
kbd98->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_KANA);
......
drivers/input/keyboard/Kconfig
View file @ 7e1bfc50
......@@ -62,7 +62,7 @@ config KEYBOARD_XTKBD
Say Y here if you want to use the old IBM PC/XT keyboard (or
compatible) on your system. This is only possible with a
parallel port keyboard adapter, you cannot connect it to the
keyboard port on a PC that runs Linux.
keyboard port on a PC that runs Linux.
To compile this driver as a module, choose M here: the
module will be called xtkbd.
......@@ -92,7 +92,7 @@ config KEYBOARD_AMIGA
depends on AMIGA && INPUT && INPUT_KEYBOARD
help
Say Y here if you are running Linux on any AMIGA and have a keyboard
attached.
attached.
To compile this driver as a module, choose M here: the
module will be called amikbd.
......@@ -103,7 +103,7 @@ config KEYBOARD_98KBD
select SERIO
help
Say Y here if you want to use the NEC PC-9801/PC-9821 keyboard (or
compatible) on your system.
compatible) on your system.
To compile this driver as a module, choose M here: the
module will be called 98kbd.
......
drivers/input/keyboard/atkbd.c
View file @ 7e1bfc50
......@@ -26,7 +26,6 @@
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/workqueue.h>
#include <linux/timer.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
MODULE_DESCRIPTION("AT and PS/2 keyboard driver");
......@@ -173,22 +172,24 @@ struct atkbd {
unsigned char keycode[512];
struct input_dev dev;
struct serio *serio;
struct timer_list timer;
char name[64];
char phys[32];
unsigned short id;
unsigned char set;
unsigned int translated:1;
unsigned int extra:1;
unsigned int write:1;
unsigned char cmdbuf[4];
unsigned char cmdcnt;
unsigned char set;
unsigned char extra;
unsigned char release;
int lastkey;
volatile signed char ack;
unsigned char emul;
unsigned short id;
unsigned char write;
unsigned char translated;
unsigned char resend;
unsigned char bat_xl;
unsigned int resend:1;
unsigned int release:1;
unsigned int bat_xl:1;
unsigned int enabled:1;
unsigned int last;
unsigned long time;
};
......@@ -248,6 +249,9 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
goto out;
}
if (!atkbd->enabled)
goto out;
if (atkbd->translated) {
if (atkbd->emul ||
......@@ -300,15 +304,20 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
case ATKBD_KEY_NULL:
break;
case ATKBD_KEY_UNKNOWN:
printk(KERN_WARNING "atkbd.c: Unknown key %s (%s set %d, code %#x on %s).\n",
atkbd->release ? "released" : "pressed",
atkbd->translated ? "translated" : "raw",
atkbd->set, code, serio->phys);
if (atkbd->translated && atkbd->set == 2 && code == 0x7a)
printk(KERN_WARNING "atkbd.c: This is an XFree86 bug. It shouldn't access"
" hardware directly.\n");
else
printk(KERN_WARNING "atkbd.c: Use 'setkeycodes %s%02x <keycode>' to make it known.\n", code & 0x80 ? "e0" : "", code & 0x7f);
if (data == ATKBD_RET_ACK || data == ATKBD_RET_NAK) {
printk(KERN_WARNING "atkbd.c: Spurious %s on %s. Some program, "
"like XFree86, might be trying access hardware directly.\n",
data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
} else {
printk(KERN_WARNING "atkbd.c: Unknown key %s "
"(%s set %d, code %#x on %s).\n",
atkbd->release ? "released" : "pressed",
atkbd->translated ? "translated" : "raw",
atkbd->set, code, serio->phys);
printk(KERN_WARNING "atkbd.c: Use 'setkeycodes %s%02x <keycode>' "
"to make it known.\n",
code & 0x80 ? "e0" : "", code & 0x7f);
}
break;
case ATKBD_SCR_1:
scroll = 1 - atkbd->release * 2;
......@@ -745,6 +754,8 @@ static void atkbd_connect(struct serio *serio, struct serio_dev *dev)
atkbd->id = 0xab00;
}
atkbd->enabled = 1;
if (atkbd->extra) {
atkbd->dev.ledbit[0] |= BIT(LED_COMPOSE) | BIT(LED_SUSPEND) | BIT(LED_SLEEP) | BIT(LED_MUTE) | BIT(LED_MISC);
sprintf(atkbd->name, "AT Set 2 Extra keyboard");
......@@ -809,12 +820,12 @@ static int atkbd_reconnect(struct serio *serio)
param[0] = (test_bit(LED_SCROLLL, atkbd->dev.led) ? 1 : 0)
| (test_bit(LED_NUML, atkbd->dev.led) ? 2 : 0)
| (test_bit(LED_CAPSL, atkbd->dev.led) ? 4 : 0);
if (atkbd_probe(atkbd))
return -1;
if (atkbd->set != atkbd_set_3(atkbd))
return -1;
atkbd_enable(atkbd);
if (atkbd_command(atkbd, param, ATKBD_CMD_SETLEDS))
......
drivers/input/keyboard/maple_keyb.c
View file @ 7e1bfc50
......@@ -139,7 +139,7 @@ static int dc_kbd_connect(struct maple_device *dev)
kbd->dev.name = dev->product_name;
kbd->dev.id.bustype = BUS_MAPLE;
input_register_device(&kbd->dev);
maple_getcond_callback(dev, dc_kbd_callback, 1, MAPLE_FUNC_KEYBOARD);
......
drivers/input/keyboard/sunkbd.c
View file @ 7e1bfc50
......@@ -11,18 +11,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -148,7 +148,7 @@ static int sunkbd_event(struct input_dev *dev, unsigned int type, unsigned int c
case EV_LED:
sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_SETLED);
sunkbd->serio->write(sunkbd->serio,
sunkbd->serio->write(sunkbd->serio,
(!!test_bit(LED_CAPSL, dev->led) << 3) | (!!test_bit(LED_SCROLLL, dev->led) << 2) |
(!!test_bit(LED_COMPOSE, dev->led) << 1) | !!test_bit(LED_NUML, dev->led));
return 0;
......@@ -160,7 +160,7 @@ static int sunkbd_event(struct input_dev *dev, unsigned int type, unsigned int c
case SND_CLICK:
sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_NOCLICK - value);
return 0;
case SND_BELL:
sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_BELLOFF - value);
return 0;
......@@ -210,7 +210,7 @@ static void sunkbd_reinit(void *data)
wait_event_interruptible_timeout(sunkbd->wait, sunkbd->reset >= 0, HZ);
sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_SETLED);
sunkbd->serio->write(sunkbd->serio,
sunkbd->serio->write(sunkbd->serio,
(!!test_bit(LED_CAPSL, sunkbd->dev.led) << 3) | (!!test_bit(LED_SCROLLL, sunkbd->dev.led) << 2) |
(!!test_bit(LED_COMPOSE, sunkbd->dev.led) << 1) | !!test_bit(LED_NUML, sunkbd->dev.led));
sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev.snd));
......@@ -231,7 +231,7 @@ static void sunkbd_connect(struct serio *serio, struct serio_dev *dev)
if ((serio->type & SERIO_PROTO) && (serio->type & SERIO_PROTO) != SERIO_SUNKBD)
return;
if (!(sunkbd = kmalloc(sizeof(struct sunkbd), GFP_KERNEL)))
return;
......
drivers/input/keyboard/xtkbd.c
View file @ 7e1bfc50
......@@ -11,18 +11,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -43,7 +43,7 @@ MODULE_LICENSE("GPL");
#define XTKBD_KEY 0x7f
#define XTKBD_RELEASE 0x80
static unsigned char xtkbd_keycode[256] = {
static unsigned char xtkbd_keycode[256] = {
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
......@@ -98,7 +98,7 @@ void xtkbd_connect(struct serio *serio, struct serio_dev *dev)
return;
memset(xtkbd, 0, sizeof(struct xtkbd));
xtkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
xtkbd->serio = serio;
......
drivers/input/misc/98spkr.c
View file @ 7e1bfc50
......@@ -42,11 +42,11 @@ static int spkr98_event(struct input_dev *dev, unsigned int type, unsigned int c
case SND_BELL: if (value) value = 1000;
case SND_TONE: break;
default: return -1;
}
}
if (value > 20 && value < 32767)
count = PIT_TICK_RATE / value;
spin_lock_irqsave(&i8253_beep_lock, flags);
if (count) {
......
drivers/input/misc/pcspkr.c
View file @ 7e1bfc50
......@@ -41,11 +41,11 @@ static int pcspkr_event(struct input_dev *dev, unsigned int type, unsigned int c
case SND_BELL: if (value) value = 1000;
case SND_TONE: break;
default: return -1;
}
}
if (value > 20 && value < 32767)
count = PIT_TICK_RATE / value;
spin_lock_irqsave(&i8253_beep_lock, flags);
if (count) {
......
drivers/input/misc/sparcspkr.c
View file @ 7e1bfc50
......@@ -53,11 +53,11 @@ static int ebus_spkr_event(struct input_dev *dev, unsigned int type, unsigned in
case SND_BELL: if (value) value = 1000;
case SND_TONE: break;
default: return -1;
}
}
if (value > 20 && value < 32767)
count = 1193182 / value;
spin_lock_irqsave(&beep_lock, flags);
/* EBUS speaker only has on/off state, the frequency does not
......@@ -108,11 +108,11 @@ static int isa_spkr_event(struct input_dev *dev, unsigned int type, unsigned int
case SND_BELL: if (value) value = 1000;
case SND_TONE: break;
default: return -1;
}
}
if (value > 20 && value < 32767)
count = 1193182 / value;
spin_lock_irqsave(&beep_lock, flags);
if (count) {
......
drivers/input/misc/uinput.c
View file @ 7e1bfc50
......@@ -18,7 +18,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Author: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
*
*
* Changes/Revisions:
* 0.1 20/06/2002
* - first public version
......@@ -68,7 +68,7 @@ static int uinput_dev_upload_effect(struct input_dev *dev, struct ff_effect *eff
static int uinput_dev_erase_effect(struct input_dev *dev, int effect_id)
{
return 0;
}
}
static int uinput_create_device(struct uinput_device *udev)
{
......@@ -123,7 +123,7 @@ static int uinput_open(struct inode *inode, struct file *file)
memset(newinput, 0, sizeof(struct input_dev));
newdev->dev = newinput;
file->private_data = newdev;
return 0;
......@@ -137,16 +137,16 @@ static int uinput_validate_absbits(struct input_dev *dev)
{
unsigned int cnt;
int retval = 0;
for (cnt = 0; cnt < ABS_MAX; cnt++) {
if (!test_bit(cnt, dev->absbit))
if (!test_bit(cnt, dev->absbit))
continue;
if (/*!dev->absmin[cnt] || !dev->absmax[cnt] || */
(dev->absmax[cnt] <= dev->absmin[cnt])) {
printk(KERN_DEBUG
printk(KERN_DEBUG
"%s: invalid abs[%02x] min:%d max:%d\n",
UINPUT_NAME, cnt,
UINPUT_NAME, cnt,
dev->absmin[cnt], dev->absmax[cnt]);
retval = -EINVAL;
break;
......@@ -154,7 +154,7 @@ static int uinput_validate_absbits(struct input_dev *dev)
if ((dev->absflat[cnt] < dev->absmin[cnt]) ||
(dev->absflat[cnt] > dev->absmax[cnt])) {
printk(KERN_DEBUG
printk(KERN_DEBUG
"%s: absflat[%02x] out of range: %d "
"(min:%d/max:%d)\n",
UINPUT_NAME, cnt, dev->absflat[cnt],
......@@ -190,7 +190,7 @@ static int uinput_alloc_device(struct file *file, const char *buffer, size_t cou
goto exit;
}
if (NULL != dev->name)
if (NULL != dev->name)
kfree(dev->name);
size = strnlen(user_dev->name, UINPUT_MAX_NAME_SIZE) + 1;
......@@ -229,7 +229,7 @@ static int uinput_alloc_device(struct file *file, const char *buffer, size_t cou
static ssize_t uinput_write(struct file *file, const char *buffer, size_t count, loff_t *ppos)
{
struct uinput_device *udev = file->private_data;
if (test_bit(UIST_CREATED, &(udev->state))) {
struct input_event ev;
......@@ -247,7 +247,7 @@ static ssize_t uinput_read(struct file *file, char *buffer, size_t count, loff_t
{
struct uinput_device *udev = file->private_data;
int retval = 0;
if (!test_bit(UIST_CREATED, &(udev->state)))
return -ENODEV;
......@@ -255,16 +255,16 @@ static ssize_t uinput_read(struct file *file, char *buffer, size_t count, loff_t
return -EAGAIN;
retval = wait_event_interruptible(udev->waitq,
(udev->head != udev->tail) ||
(udev->head != udev->tail) ||
!test_bit(UIST_CREATED, &(udev->state)));
if (retval)
return retval;
if (!test_bit(UIST_CREATED, &(udev->state)))
return -ENODEV;
while ((udev->head != udev->tail) &&
while ((udev->head != udev->tail) &&
(retval + sizeof(struct input_event) <= count)) {
if (copy_to_user(buffer + retval, &(udev->buff[udev->tail]),
sizeof(struct input_event))) return -EFAULT;
......@@ -284,7 +284,7 @@ static unsigned int uinput_poll(struct file *file, poll_table *wait)
if (udev->head != udev->tail)
return POLLIN | POLLRDNORM;
return 0;
return 0;
}
static int uinput_burn_device(struct uinput_device *udev)
......@@ -318,7 +318,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
case UI_DEV_CREATE:
retval = uinput_create_device(udev);
break;
case UI_DEV_DESTROY:
retval = uinput_destroy_device(udev);
break;
......@@ -330,7 +330,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
}
set_bit(arg, udev->dev->evbit);
break;
case UI_SET_KEYBIT:
if (arg > KEY_MAX) {
retval = -EINVAL;
......@@ -338,7 +338,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
}
set_bit(arg, udev->dev->keybit);
break;
case UI_SET_RELBIT:
if (arg > REL_MAX) {
retval = -EINVAL;
......@@ -346,7 +346,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
}
set_bit(arg, udev->dev->relbit);
break;
case UI_SET_ABSBIT:
if (arg > ABS_MAX) {
retval = -EINVAL;
......@@ -354,7 +354,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
}
set_bit(arg, udev->dev->absbit);
break;
case UI_SET_MSCBIT:
if (arg > MSC_MAX) {
retval = -EINVAL;
......@@ -362,7 +362,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
}
set_bit(arg, udev->dev->mscbit);
break;
case UI_SET_LEDBIT:
if (arg > LED_MAX) {
retval = -EINVAL;
......@@ -370,7 +370,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
}
set_bit(arg, udev->dev->ledbit);
break;
case UI_SET_SNDBIT:
if (arg > SND_MAX) {
retval = -EINVAL;
......@@ -378,7 +378,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
}
set_bit(arg, udev->dev->sndbit);
break;
case UI_SET_FFBIT:
if (arg > FF_MAX) {
retval = -EINVAL;
......@@ -386,7 +386,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
}
set_bit(arg, udev->dev->ffbit);
break;
default:
retval = -EFAULT;
}
......
drivers/input/mouse/logips2pp.c
View file @ 7e1bfc50
......@@ -14,6 +14,25 @@
#include "psmouse.h"
#include "logips2pp.h"
/* Logitech mouse types */
#define PS2PP_KIND_WHEEL 1
#define PS2PP_KIND_MX 2
#define PS2PP_KIND_TP3 3
/* Logitech mouse features */
#define PS2PP_WHEEL 0x01
#define PS2PP_HWHEEL 0x02
#define PS2PP_SIDE_BTN 0x04
#define PS2PP_EXTRA_BTN 0x08
#define PS2PP_TASK_BTN 0x10
#define PS2PP_NAV_BTN 0x20
struct ps2pp_info {
const int model;
unsigned const int kind;
unsigned const int features;
};
/*
* Process a PS2++ or PS2T++ packet.
*/
......@@ -63,7 +82,6 @@ void ps2pp_process_packet(struct psmouse *psmouse)
packet[0] &= 0x0f;
packet[1] = 0;
packet[2] = 0;
}
}
......@@ -76,18 +94,9 @@ void ps2pp_process_packet(struct psmouse *psmouse)
static int ps2pp_cmd(struct psmouse *psmouse, unsigned char *param, unsigned char command)
{
unsigned char d;
int i;
if (psmouse_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11))
if (psmouse_sliced_command(psmouse, command))
return -1;
for (i = 6; i >= 0; i -= 2) {
d = (command >> i) & 3;
if(psmouse_command(psmouse, &d, PSMOUSE_CMD_SETRES))
return -1;
}
if (psmouse_command(psmouse, param, PSMOUSE_CMD_POLL))
return -1;
......@@ -99,7 +108,7 @@ static int ps2pp_cmd(struct psmouse *psmouse, unsigned char *param, unsigned cha
* enabled if we do nothing to it. Of course I put this in because I want it
* disabled :P
* 1 - enabled (if previously disabled, also default)
* 0/2 - disabled
* 0/2 - disabled
*/
static void ps2pp_set_smartscroll(struct psmouse *psmouse)
......@@ -113,14 +122,11 @@ static void ps2pp_set_smartscroll(struct psmouse *psmouse)
psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
if (psmouse_smartscroll == 1)
param[0] = 1;
else
if (psmouse_smartscroll > 2)
return;
/* else leave param[0] == 0 to disable */
psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
if (psmouse_smartscroll < 2) {
/* 0 - disabled, 1 - enabled */
param[0] = psmouse_smartscroll;
psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
}
}
/*
......@@ -138,133 +144,167 @@ void ps2pp_set_800dpi(struct psmouse *psmouse)
psmouse_command(psmouse, &param, PSMOUSE_CMD_SETRES);
}
static struct ps2pp_info *get_model_info(unsigned char model)
{
static struct ps2pp_info ps2pp_list[] = {
{ 12, 0, PS2PP_SIDE_BTN},
{ 13, 0, 0 },
{ 40, 0, PS2PP_SIDE_BTN },
{ 41, 0, PS2PP_SIDE_BTN },
{ 42, 0, PS2PP_SIDE_BTN },
{ 43, 0, PS2PP_SIDE_BTN },
{ 50, 0, 0 },
{ 51, 0, 0 },
{ 52, PS2PP_KIND_WHEEL, PS2PP_SIDE_BTN | PS2PP_WHEEL },
{ 53, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 61, PS2PP_KIND_MX,
PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
PS2PP_EXTRA_BTN | PS2PP_NAV_BTN }, /* MX700 */
{ 73, 0, PS2PP_SIDE_BTN },
{ 75, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 76, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 80, PS2PP_KIND_WHEEL, PS2PP_SIDE_BTN | PS2PP_WHEEL },
{ 81, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 83, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 88, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 96, 0, 0 },
{ 97, PS2PP_KIND_TP3, PS2PP_WHEEL | PS2PP_HWHEEL },
{ 100, PS2PP_KIND_MX,
PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
PS2PP_EXTRA_BTN | PS2PP_NAV_BTN }, /* MX510 */
{ 112, PS2PP_KIND_MX,
PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
PS2PP_EXTRA_BTN | PS2PP_NAV_BTN }, /* MX500 */
{ 114, PS2PP_KIND_MX,
PS2PP_WHEEL | PS2PP_SIDE_BTN |
PS2PP_TASK_BTN | PS2PP_EXTRA_BTN }, /* M310 */
{ }
};
int i;
for (i = 0; ps2pp_list[i].model; i++)
if (model == ps2pp_list[i].model)
return &ps2pp_list[i];
return NULL;
}
/*
* Detect the exact model and features of a PS2++ or PS2T++ Logitech mouse or
* touchpad.
* Set up input device's properties based on the detected mouse model.
*/
static int ps2pp_detect_model(struct psmouse *psmouse, unsigned char *param)
static void ps2pp_set_model_properties(struct psmouse *psmouse, struct ps2pp_info *model_info)
{
int i;
static struct _logips2_list {
const int model;
unsigned const int features;
} logips2pp_list [] = {
{ 12, PS2PP_4BTN},
{ 13, 0 },
{ 40, PS2PP_4BTN },
{ 41, PS2PP_4BTN },
{ 42, PS2PP_4BTN },
{ 43, PS2PP_4BTN },
{ 50, 0 },
{ 51, 0 },
{ 52, PS2PP_4BTN | PS2PP_WHEEL },
{ 53, PS2PP_WHEEL },
{ 61, PS2PP_WHEEL | PS2PP_MX }, /* MX700 */
{ 73, PS2PP_4BTN },
{ 75, PS2PP_WHEEL },
{ 76, PS2PP_WHEEL },
{ 80, PS2PP_4BTN | PS2PP_WHEEL },
{ 81, PS2PP_WHEEL },
{ 83, PS2PP_WHEEL },
{ 88, PS2PP_WHEEL },
{ 96, 0 },
{ 97, 0 },
{ 100 , PS2PP_WHEEL | PS2PP_MX }, /* MX510 */
{ 112 , PS2PP_WHEEL | PS2PP_MX }, /* MX500 */
{ 114 , PS2PP_WHEEL | PS2PP_MX | PS2PP_MX310 }, /* MX310 */
{ }
};
if (model_info->features & PS2PP_SIDE_BTN)
set_bit(BTN_SIDE, psmouse->dev.keybit);
if (model_info->features & PS2PP_EXTRA_BTN)
set_bit(BTN_EXTRA, psmouse->dev.keybit);
psmouse->vendor = "Logitech";
psmouse->model = ((param[0] >> 4) & 0x07) | ((param[0] << 3) & 0x78);
if (model_info->features & PS2PP_TASK_BTN)
set_bit(BTN_TASK, psmouse->dev.keybit);
if (param[1] < 3)
clear_bit(BTN_MIDDLE, psmouse->dev.keybit);
if (param[1] < 2)
clear_bit(BTN_RIGHT, psmouse->dev.keybit);
if (model_info->features & PS2PP_NAV_BTN) {
set_bit(BTN_FORWARD, psmouse->dev.keybit);
set_bit(BTN_BACK, psmouse->dev.keybit);
}
psmouse->type = PSMOUSE_PS2;
if (model_info->features & PS2PP_WHEEL)
set_bit(REL_WHEEL, psmouse->dev.relbit);
for (i = 0; logips2pp_list[i].model; i++){
if (logips2pp_list[i].model == psmouse->model){
psmouse->type = PSMOUSE_PS2PP;
if (logips2pp_list[i].features & PS2PP_4BTN)
set_bit(BTN_SIDE, psmouse->dev.keybit);
if (model_info->features & PS2PP_HWHEEL)
set_bit(REL_HWHEEL, psmouse->dev.relbit);
if (logips2pp_list[i].features & PS2PP_WHEEL){
set_bit(REL_WHEEL, psmouse->dev.relbit);
psmouse->name = "Wheel Mouse";
}
if (logips2pp_list[i].features & PS2PP_MX) {
set_bit(BTN_SIDE, psmouse->dev.keybit);
set_bit(BTN_EXTRA, psmouse->dev.keybit);
set_bit(BTN_TASK, psmouse->dev.keybit);
if (!(logips2pp_list[i].features & PS2PP_MX310)){
set_bit(BTN_BACK, psmouse->dev.keybit);
set_bit(BTN_FORWARD, psmouse->dev.keybit);
}
psmouse->name = "MX Mouse";
}
switch (model_info->kind) {
case PS2PP_KIND_WHEEL:
psmouse->name = "Wheel Mouse";
break;
case PS2PP_KIND_MX:
psmouse->name = "MX Mouse";
break;
case PS2PP_KIND_TP3:
psmouse->name = "TouchPad 3";
break;
}
}
}
/*
* Do Logitech PS2++ / PS2T++ magic init.
* Logitech magic init. Detect whether the mouse is a Logitech one
* and its exact model and try turning on extended protocol for ones
* that support it.
*/
if (psmouse->type == PSMOUSE_PS2PP) {
if (psmouse->model == 97) { /* TouchPad 3 */
int ps2pp_init(struct psmouse *psmouse, int set_properties)
{
unsigned char param[4];
unsigned char protocol = PSMOUSE_PS2;
unsigned char model, buttons;
struct ps2pp_info *model_info;
param[0] = 0;
psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
psmouse_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11);
psmouse_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11);
psmouse_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11);
param[1] = 0;
psmouse_command(psmouse, param, PSMOUSE_CMD_GETINFO);
if (param[1] != 0) {
model = ((param[0] >> 4) & 0x07) | ((param[0] << 3) & 0x78);
buttons = param[1];
model_info = get_model_info(model);
set_bit(REL_WHEEL, psmouse->dev.relbit);
set_bit(REL_HWHEEL, psmouse->dev.relbit);
/*
* Do Logitech PS2++ / PS2T++ magic init.
*/
if (model == 97) { /* Touch Pad 3 */
param[0] = 0x11; param[1] = 0x04; param[2] = 0x68; /* Unprotect RAM */
/* Unprotect RAM */
param[0] = 0x11; param[1] = 0x04; param[2] = 0x68;
psmouse_command(psmouse, param, 0x30d1);
param[0] = 0x11; param[1] = 0x05; param[2] = 0x0b; /* Enable features */
/* Enable features */
param[0] = 0x11; param[1] = 0x05; param[2] = 0x0b;
psmouse_command(psmouse, param, 0x30d1);
param[0] = 0x11; param[1] = 0x09; param[2] = 0xc3; /* Enable PS2++ */
/* Enable PS2++ */
param[0] = 0x11; param[1] = 0x09; param[2] = 0xc3;
psmouse_command(psmouse, param, 0x30d1);
param[0] = 0;
if (!psmouse_command(psmouse, param, 0x13d1) &&
param[0] == 0x06 && param[1] == 0x00 && param[2] == 0x14) {
psmouse->name = "TouchPad 3";
return PSMOUSE_PS2TPP;
param[0] == 0x06 && param[1] == 0x00 && param[2] == 0x14) {
protocol = PSMOUSE_PS2TPP;
}
} else {
} else if (get_model_info(model) != NULL) {
param[0] = param[1] = param[2] = 0;
ps2pp_cmd(psmouse, param, 0x39); /* Magic knock */
ps2pp_cmd(psmouse, param, 0xDB);
if ((param[0] & 0x78) == 0x48 && (param[1] & 0xf3) == 0xc2 &&
(param[2] & 3) == ((param[1] >> 2) & 3)) {
ps2pp_set_smartscroll(psmouse);
return PSMOUSE_PS2PP;
if ((param[0] & 0x78) == 0x48 &&
(param[1] & 0xf3) == 0xc2 &&
(param[2] & 0x03) == ((param[1] >> 2) & 3)) {
ps2pp_set_smartscroll(psmouse);
protocol = PSMOUSE_PS2PP;
}
}
}
return 0;
}
if (set_properties) {
psmouse->vendor = "Logitech";
psmouse->model = model;
/*
* Logitech magic init.
*/
int ps2pp_detect(struct psmouse *psmouse)
{
unsigned char param[4];
if (buttons < 3)
clear_bit(BTN_MIDDLE, psmouse->dev.keybit);
if (buttons < 2)
clear_bit(BTN_RIGHT, psmouse->dev.keybit);
param[0] = 0;
psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
psmouse_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11);
psmouse_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11);
psmouse_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11);
param[1] = 0;
psmouse_command(psmouse, param, PSMOUSE_CMD_GETINFO);
if (model_info)
ps2pp_set_model_properties(psmouse, model_info);
}
}
return param[1] != 0 ? ps2pp_detect_model(psmouse, param) : 0;
return protocol;
}
drivers/input/mouse/logips2pp.h
View file @ 7e1bfc50
......@@ -11,13 +11,8 @@
#ifndef _LOGIPS2PP_H
#define _LOGIPS2PP_H
#define PS2PP_4BTN 0x01
#define PS2PP_WHEEL 0x02
#define PS2PP_MX 0x04
#define PS2PP_MX310 0x08
struct psmouse;
void ps2pp_process_packet(struct psmouse *psmouse);
void ps2pp_set_800dpi(struct psmouse *psmouse);
int ps2pp_detect(struct psmouse *psmouse);
int ps2pp_init(struct psmouse *psmouse, int set_properties);
#endif
drivers/input/mouse/psmouse-base.c
View file @ 7e1bfc50
......@@ -43,9 +43,9 @@ int psmouse_smartscroll = 1;
module_param_named(smartscroll, psmouse_smartscroll, bool, 0);
MODULE_PARM_DESC(smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled.");
unsigned int psmouse_resetafter;
static unsigned int psmouse_resetafter;
module_param_named(resetafter, psmouse_resetafter, uint, 0);
MODULE_PARM_DESC(resetafter, "Reset Synaptics Touchpad after so many bad packets (0 = never).");
MODULE_PARM_DESC(resetafter, "Reset device after so many bad packets (0 = never).");
__obsolete_setup("psmouse_noext");
__obsolete_setup("psmouse_resolution=");
......@@ -56,15 +56,22 @@ __obsolete_setup("psmouse_rate=");
static char *psmouse_protocols[] = { "None", "PS/2", "PS2++", "PS2T++", "GenPS/2", "ImPS/2", "ImExPS/2", "SynPS/2"};
/*
* psmouse_process_packet() analyzes the PS/2 mouse packet contents and
* reports relevant events to the input module.
* psmouse_process_byte() analyzes the PS/2 data stream and reports
* relevant events to the input module once full packet has arrived.
*/
static void psmouse_process_packet(struct psmouse *psmouse, struct pt_regs *regs)
static psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse, struct pt_regs *regs)
{
struct input_dev *dev = &psmouse->dev;
unsigned char *packet = psmouse->packet;
if (psmouse->pktcnt < 3 + (psmouse->type >= PSMOUSE_GENPS))
return PSMOUSE_GOOD_DATA;
/*
* Full packet accumulated, process it
*/
input_regs(dev, regs);
/*
......@@ -112,6 +119,8 @@ static void psmouse_process_packet(struct psmouse *psmouse, struct pt_regs *regs
input_report_rel(dev, REL_Y, packet[2] ? (int) ((packet[0] << 3) & 0x100) - (int) packet[2] : 0);
input_sync(dev);
return PSMOUSE_FULL_PACKET;
}
/*
......@@ -123,6 +132,7 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
unsigned char data, unsigned int flags, struct pt_regs *regs)
{
struct psmouse *psmouse = serio->private;
psmouse_ret_t rc;
if (psmouse->state == PSMOUSE_IGNORE)
goto out;
......@@ -180,7 +190,7 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
if (psmouse->pktcnt == 2) {
if (psmouse->packet[1] == PSMOUSE_RET_ID) {
psmouse->state = PSMOUSE_IGNORE;
serio_rescan(serio);
serio_reconnect(serio);
goto out;
}
if (psmouse->type == PSMOUSE_SYNAPTICS) {
......@@ -193,19 +203,32 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
}
}
if (psmouse->type == PSMOUSE_SYNAPTICS) {
/*
* The synaptics driver has its own resync logic,
* so it needs to receive all bytes one at a time.
*/
synaptics_process_byte(psmouse, regs);
goto out;
}
rc = psmouse->protocol_handler(psmouse, regs);
if (psmouse->pktcnt == 3 + (psmouse->type >= PSMOUSE_GENPS)) {
psmouse_process_packet(psmouse, regs);
psmouse->pktcnt = 0;
goto out;
switch (rc) {
case PSMOUSE_BAD_DATA:
printk(KERN_WARNING "psmouse.c: %s at %s lost sync at byte %d\n",
psmouse->name, psmouse->phys, psmouse->pktcnt);
psmouse->pktcnt = 0;
if (++psmouse->out_of_sync == psmouse_resetafter) {
psmouse->state = PSMOUSE_IGNORE;
printk(KERN_NOTICE "psmouse.c: issuing reconnect request\n");
serio_reconnect(psmouse->serio);
}
break;
case PSMOUSE_FULL_PACKET:
psmouse->pktcnt = 0;
if (psmouse->out_of_sync) {
psmouse->out_of_sync = 0;
printk(KERN_NOTICE "psmouse.c: %s at %s - driver resynched.\n",
psmouse->name, psmouse->phys);
}
break;
case PSMOUSE_GOOD_DATA:
break;
}
out:
return IRQ_HANDLED;
......@@ -288,6 +311,30 @@ int psmouse_command(struct psmouse *psmouse, unsigned char *param, int command)
}
/*
* psmouse_sliced_command() sends an extended PS/2 command to the mouse
* using sliced syntax, understood by advanced devices, such as Logitech
* or Synaptics touchpads. The command is encoded as:
* 0xE6 0xE8 rr 0xE8 ss 0xE8 tt 0xE8 uu where (rr*64)+(ss*16)+(tt*4)+uu
* is the command.
*/
int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command)
{
int i;
if (psmouse_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11))
return -1;
for (i = 6; i >= 0; i -= 2) {
unsigned char d = (command >> i) & 3;
if (psmouse_command(psmouse, &d, PSMOUSE_CMD_SETRES))
return -1;
}
return 0;
}
/*
* psmouse_reset() resets the mouse into power-on state.
*/
......@@ -363,31 +410,31 @@ static int im_explorer_detect(struct psmouse *psmouse)
* the mouse may have.
*/
static int psmouse_extensions(struct psmouse *psmouse)
static int psmouse_extensions(struct psmouse *psmouse,
unsigned int max_proto, int set_properties)
{
int synaptics_hardware = 0;
psmouse->vendor = "Generic";
psmouse->name = "Mouse";
psmouse->model = 0;
/*
* Try Synaptics TouchPad
*/
if (psmouse_max_proto > PSMOUSE_PS2 && synaptics_detect(psmouse)) {
if (max_proto > PSMOUSE_PS2 && synaptics_detect(psmouse)) {
synaptics_hardware = 1;
psmouse->vendor = "Synaptics";
psmouse->name = "TouchPad";
if (psmouse_max_proto > PSMOUSE_IMEX) {
if (synaptics_init(psmouse) == 0)
if (set_properties) {
psmouse->vendor = "Synaptics";
psmouse->name = "TouchPad";
}
if (max_proto > PSMOUSE_IMEX) {
if (!set_properties || synaptics_init(psmouse) == 0)
return PSMOUSE_SYNAPTICS;
/*
* Some Synaptics touchpads can emulate extended protocols (like IMPS/2).
* Unfortunately Logitech/Genius probes confuse some firmware versions so
* we'll have to skip them.
*/
psmouse_max_proto = PSMOUSE_IMEX;
max_proto = PSMOUSE_IMEX;
}
/*
* Make sure that touchpad is in relative mode, gestures (taps) are enabled
......@@ -395,35 +442,45 @@ static int psmouse_extensions(struct psmouse *psmouse)
synaptics_reset(psmouse);
}
if (psmouse_max_proto > PSMOUSE_IMEX && genius_detect(psmouse)) {
set_bit(BTN_EXTRA, psmouse->dev.keybit);
set_bit(BTN_SIDE, psmouse->dev.keybit);
set_bit(REL_WHEEL, psmouse->dev.relbit);
if (max_proto > PSMOUSE_IMEX && genius_detect(psmouse)) {
if (set_properties) {
set_bit(BTN_EXTRA, psmouse->dev.keybit);
set_bit(BTN_SIDE, psmouse->dev.keybit);
set_bit(REL_WHEEL, psmouse->dev.relbit);
psmouse->vendor = "Genius";
psmouse->name = "Wheel Mouse";
}
psmouse->vendor = "Genius";
psmouse->name = "Wheel Mouse";
return PSMOUSE_GENPS;
}
if (psmouse_max_proto > PSMOUSE_IMEX) {
int type = ps2pp_detect(psmouse);
if (type)
if (max_proto > PSMOUSE_IMEX) {
int type = ps2pp_init(psmouse, set_properties);
if (type > PSMOUSE_PS2)
return type;
}
if (psmouse_max_proto >= PSMOUSE_IMPS && intellimouse_detect(psmouse)) {
set_bit(REL_WHEEL, psmouse->dev.relbit);
if (max_proto >= PSMOUSE_IMPS && intellimouse_detect(psmouse)) {
if (psmouse_max_proto >= PSMOUSE_IMEX &&
im_explorer_detect(psmouse)) {
set_bit(BTN_SIDE, psmouse->dev.keybit);
set_bit(BTN_EXTRA, psmouse->dev.keybit);
if (set_properties) {
set_bit(REL_WHEEL, psmouse->dev.relbit);
if (!psmouse->name)
psmouse->name = "Wheel Mouse";
}
if (max_proto >= PSMOUSE_IMEX && im_explorer_detect(psmouse)) {
if (!set_properties) {
set_bit(BTN_SIDE, psmouse->dev.keybit);
set_bit(BTN_EXTRA, psmouse->dev.keybit);
if (!psmouse->name)
psmouse->name = "Explorer Mouse";
}
psmouse->name = "Explorer Mouse";
return PSMOUSE_IMEX;
}
psmouse->name = "Wheel Mouse";
return PSMOUSE_IMPS;
}
......@@ -473,12 +530,7 @@ static int psmouse_probe(struct psmouse *psmouse)
if (psmouse_command(psmouse, NULL, PSMOUSE_CMD_RESET_DIS))
printk(KERN_WARNING "psmouse.c: Failed to reset mouse on %s\n", psmouse->serio->phys);
/*
* And here we try to determine if it has any extensions over the
* basic PS/2 3-button mouse.
*/
return psmouse->type = psmouse_extensions(psmouse);
return 0;
}
/*
......@@ -616,7 +668,6 @@ static void psmouse_connect(struct serio *serio, struct serio_dev *dev)
psmouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
psmouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
psmouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
psmouse->state = PSMOUSE_CMD_MODE;
psmouse->serio = serio;
psmouse->dev.private = psmouse;
......@@ -628,13 +679,21 @@ static void psmouse_connect(struct serio *serio, struct serio_dev *dev)
return;
}
if (psmouse_probe(psmouse) <= 0) {
if (psmouse_probe(psmouse) < 0) {
serio_close(serio);
kfree(psmouse);
serio->private = NULL;
return;
}
psmouse->type = psmouse_extensions(psmouse, psmouse_max_proto, 1);
if (!psmouse->vendor)
psmouse->vendor = "Generic";
if (!psmouse->name)
psmouse->name = "Mouse";
if (!psmouse->protocol_handler)
psmouse->protocol_handler = psmouse_process_byte;
sprintf(psmouse->devname, "%s %s %s",
psmouse_protocols[psmouse->type], psmouse->vendor, psmouse->name);
sprintf(psmouse->phys, "%s/input0",
......@@ -668,27 +727,24 @@ static int psmouse_reconnect(struct serio *serio)
{
struct psmouse *psmouse = serio->private;
struct serio_dev *dev = serio->dev;
int old_type;
if (!dev || !psmouse) {
printk(KERN_DEBUG "psmouse: reconnect request, but serio is disconnected, ignoring...\n");
return -1;
}
old_type = psmouse->type;
psmouse->state = PSMOUSE_CMD_MODE;
psmouse->type = psmouse->acking = psmouse->cmdcnt = psmouse->pktcnt = 0;
psmouse->acking = psmouse->cmdcnt = psmouse->pktcnt = psmouse->out_of_sync = 0;
if (psmouse->reconnect) {
if (psmouse->reconnect(psmouse))
return -1;
} else if (psmouse_probe(psmouse) != old_type)
} else if (psmouse_probe(psmouse) < 0 ||
psmouse->type != psmouse_extensions(psmouse, psmouse_max_proto, 0))
return -1;
/* ok, the device type (and capabilities) match the old one,
* we can continue using it, complete intialization
*/
psmouse->type = old_type;
psmouse_initialize(psmouse);
if (psmouse->ptport) {
......
drivers/input/mouse/psmouse.h
View file @ 7e1bfc50
......@@ -22,6 +22,13 @@
#define PSMOUSE_ACTIVATED 1
#define PSMOUSE_IGNORE 2
/* psmouse protocol handler return codes */
typedef enum {
PSMOUSE_BAD_DATA,
PSMOUSE_GOOD_DATA,
PSMOUSE_FULL_PACKET
} psmouse_ret_t;
struct psmouse;
struct psmouse_ptport {
......@@ -45,6 +52,7 @@ struct psmouse {
unsigned char type;
unsigned char model;
unsigned long last;
unsigned long out_of_sync;
unsigned char state;
char acking;
volatile char ack;
......@@ -52,6 +60,7 @@ struct psmouse {
char devname[64];
char phys[32];
psmouse_ret_t (*protocol_handler)(struct psmouse *psmouse, struct pt_regs *regs);
int (*reconnect)(struct psmouse *psmouse);
void (*disconnect)(struct psmouse *psmouse);
};
......@@ -65,10 +74,10 @@ struct psmouse {
#define PSMOUSE_SYNAPTICS 7
int psmouse_command(struct psmouse *psmouse, unsigned char *param, int command);
int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command);
int psmouse_reset(struct psmouse *psmouse);
extern int psmouse_smartscroll;
extern unsigned int psmouse_rate;
extern unsigned int psmouse_resetafter;
#endif /* _PSMOUSE_H */
drivers/input/mouse/synaptics.c
View file @ 7e1bfc50
This diff is collapsed.
drivers/input/mouse/synaptics.h
View file @ 7e1bfc50
......@@ -9,7 +9,6 @@
#ifndef _SYNAPTICS_H
#define _SYNAPTICS_H
extern void synaptics_process_byte(struct psmouse *psmouse, struct pt_regs *regs);
extern int synaptics_detect(struct psmouse *psmouse);
extern int synaptics_init(struct psmouse *psmouse);
extern void synaptics_reset(struct psmouse *psmouse);
......@@ -44,13 +43,14 @@ extern void synaptics_reset(struct psmouse *psmouse);
/* synaptics capability bits */
#define SYN_CAP_EXTENDED(c) ((c) & (1 << 23))
#define SYN_CAP_MIDDLE_BUTTON(c) ((c) & (1 << 18))
#define SYN_CAP_PASS_THROUGH(c) ((c) & (1 << 7))
#define SYN_CAP_SLEEP(c) ((c) & (1 << 4))
#define SYN_CAP_FOUR_BUTTON(c) ((c) & (1 << 3))
#define SYN_CAP_MULTIFINGER(c) ((c) & (1 << 1))
#define SYN_CAP_PALMDETECT(c) ((c) & (1 << 0))
#define SYN_CAP_VALID(c) ((((c) & 0x00ff00) >> 8) == 0x47)
#define SYN_EXT_CAP_REQUESTS(c) ((((c) & 0x700000) >> 20) == 1)
#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20)
#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12)
/* synaptics modes query bits */
......@@ -86,18 +86,12 @@ struct synaptics_hw_state {
int y;
int z;
int w;
int left;
int right;
int up;
int down;
int b0;
int b1;
int b2;
int b3;
int b4;
int b5;
int b6;
int b7;
unsigned int left:1;
unsigned int right:1;
unsigned int middle:1;
unsigned int up:1;
unsigned int down:1;
unsigned char ext_buttons;
};
struct synaptics_data {
......@@ -108,7 +102,6 @@ struct synaptics_data {
unsigned long int identity; /* Identification */
/* Data for normal processing */
unsigned int out_of_sync; /* # of packets out of sync */
int old_w; /* Previous w value */
unsigned char pkt_type; /* packet type - old, new, etc */
};
......
drivers/input/mousedev.c
View file @ 7e1bfc50
This diff is collapsed.
drivers/input/power.c
View file @ 7e1bfc50
/*
* $Id: power.c,v 1.10 2001/09/25 09:17:15 vojtech Exp $
*
* Copyright (c) 2001 "Crazy" James Simmons
* Copyright (c) 2001 "Crazy" James Simmons
*
* Input driver Power Management.
*
......@@ -51,7 +51,7 @@ static void suspend_button_task_handler(void *data)
static DECLARE_WORK(suspend_button_task, suspend_button_task_handler, NULL);
static void power_event(struct input_handle *handle, unsigned int type,
static void power_event(struct input_handle *handle, unsigned int type,
unsigned int code, int down)
{
struct input_dev *dev = handle->dev;
......@@ -73,7 +73,7 @@ static void power_event(struct input_handle *handle, unsigned int type,
case KEY_POWER:
/* Hum power down the machine. */
break;
default:
default:
return;
}
} else {
......@@ -83,9 +83,9 @@ static void power_event(struct input_handle *handle, unsigned int type,
/* This is risky. See pm.h for details. */
if (dev->state != PM_RESUME)
dev->state = PM_RESUME;
else
dev->state = PM_SUSPEND;
pm_send(dev->pm_dev, dev->state, dev);
else
dev->state = PM_SUSPEND;
pm_send(dev->pm_dev, dev->state, dev);
break;
case KEY_POWER:
/* Turn the input device off completely ? */
......@@ -97,14 +97,14 @@ static void power_event(struct input_handle *handle, unsigned int type,
return;
}
static struct input_handle *power_connect(struct input_handler *handler,
struct input_dev *dev,
static struct input_handle *power_connect(struct input_handler *handler,
struct input_dev *dev,
struct input_device_id *id)
{
struct input_handle *handle;
if (!test_bit(EV_KEY, dev->evbit) || !test_bit(EV_PWR, dev->evbit))
return NULL;
return NULL;
if (!test_bit(KEY_SUSPEND, dev->keybit) || (!test_bit(KEY_POWER, dev->keybit)))
return NULL;
......@@ -133,21 +133,21 @@ static struct input_device_id power_ids[] = {
.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
.evbit = { BIT(EV_KEY) },
.keybit = { [LONG(KEY_SUSPEND)] = BIT(KEY_SUSPEND) }
},
},
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
.evbit = { BIT(EV_KEY) },
.keybit = { [LONG(KEY_POWER)] = BIT(KEY_POWER) }
},
},
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT,
.evbit = { BIT(EV_PWR) },
},
},
{ }, /* Terminating entry */
};
MODULE_DEVICE_TABLE(input, power_ids);
static struct input_handler power_handler = {
.event = power_event,
.connect = power_connect,
......@@ -172,3 +172,4 @@ module_exit(power_exit);
MODULE_AUTHOR("James Simmons <jsimmons@transvirtual.com>");
MODULE_DESCRIPTION("Input Power Management driver");
MODULE_LICENSE("GPL");
drivers/input/serio/98kbd-io.c
View file @ 7e1bfc50
......@@ -42,8 +42,8 @@ MODULE_LICENSE("GPL");
* Register numbers.
*/
#define KBD98_COMMAND_REG 0x43
#define KBD98_STATUS_REG 0x43
#define KBD98_COMMAND_REG 0x43
#define KBD98_STATUS_REG 0x43
#define KBD98_DATA_REG 0x41
spinlock_t kbd98io_lock = SPIN_LOCK_UNLOCKED;
......@@ -51,7 +51,7 @@ spinlock_t kbd98io_lock = SPIN_LOCK_UNLOCKED;
static struct serio kbd98_port;
extern struct pt_regs *kbd_pt_regs;
static void kbd98io_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static irqreturn_t kbd98io_interrupt(int irq, void *dev_id, struct pt_regs *regs);
/*
* kbd98_flush() flushes all data that may be in the keyboard buffers
......@@ -143,7 +143,7 @@ static struct serio kbd98_port =
* to the upper layers.
*/
static void kbd98io_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static irqreturn_t kbd98io_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
unsigned long flags;
unsigned char data;
......@@ -154,6 +154,7 @@ static void kbd98io_interrupt(int irq, void *dev_id, struct pt_regs *regs)
spin_unlock_irqrestore(&kbd98io_lock, flags);
serio_interrupt(&kbd98_port, data, 0, regs);
return IRQ_HANDLED;
}
int __init kbd98io_init(void)
......
drivers/input/serio/ct82c710.c
View file @ 7e1bfc50
......@@ -11,18 +11,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......
drivers/input/serio/gscps2.c
View file @ 7e1bfc50
......@@ -16,7 +16,7 @@
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
*
* TODO:
* - Dino testing (did HP ever shipped a machine on which this port
* was usable/enabled ?)
......@@ -44,7 +44,7 @@ MODULE_DEVICE_TABLE(parisc, gscps2_device_tbl);
#define PFX "gscps2.c: "
/*
/*
* Driver constants
*/
......@@ -222,7 +222,7 @@ static LIST_HEAD(ps2port_list);
/**
* gscps2_interrupt() - Interruption service routine
*
* This function reads received PS/2 bytes and processes them on
* This function reads received PS/2 bytes and processes them on
* all interfaces.
* The problematic part here is, that the keyboard and mouse PS/2 port
* share the same interrupt and it's not possible to send data if any
......@@ -240,9 +240,9 @@ static irqreturn_t gscps2_interrupt(int irq, void *dev, struct pt_regs *regs)
unsigned long flags;
spin_lock_irqsave(&ps2port->lock, flags);
while ( (ps2port->buffer[ps2port->append].str =
while ( (ps2port->buffer[ps2port->append].str =
gscps2_readb_status(ps2port->addr)) & GSC_STAT_RBNE ) {
ps2port->buffer[ps2port->append].data =
ps2port->buffer[ps2port->append].data =
gscps2_readb_input(ps2port->addr);
ps2port->append = ((ps2port->append+1) & BUFFER_SIZE);
}
......@@ -349,7 +349,7 @@ static int __init gscps2_probe(struct parisc_device *dev)
if (!dev->irq)
return -ENODEV;
/* Offset for DINO PS/2. Works with LASI even */
if (dev->id.sversion == 0x96)
hpa += GSC_DINO_OFFSET;
......@@ -368,7 +368,7 @@ static int __init gscps2_probe(struct parisc_device *dev)
gscps2_reset(ps2port);
ps2port->id = readb(ps2port->addr+GSC_ID) & 0x0f;
snprintf(ps2port->name, sizeof(ps2port->name)-1, "%s %s",
gscps2_serio_port.name,
gscps2_serio_port.name,
(ps2port->id == GSC_ID_KEYBOARD) ? "keyboard" : "mouse" );
memcpy(&ps2port->port, &gscps2_serio_port, sizeof(gscps2_serio_port));
......@@ -401,9 +401,9 @@ static int __init gscps2_probe(struct parisc_device *dev)
ps2port->port.phys);
serio_register_port(&ps2port->port);
return 0;
fail:
free_irq(dev->irq, ps2port);
......@@ -430,7 +430,7 @@ static int __devexit gscps2_remove(struct parisc_device *dev)
list_del(&ps2port->node);
iounmap(ps2port->addr);
#if 0
release_mem_region(dev->hpa, GSC_STATUS + 4);
release_mem_region(dev->hpa, GSC_STATUS + 4);
#endif
dev_set_drvdata(&dev->dev, NULL);
kfree(ps2port);
......@@ -441,7 +441,7 @@ static int __devexit gscps2_remove(struct parisc_device *dev)
static struct parisc_device_id gscps2_device_tbl[] = {
{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00084 }, /* LASI PS/2 */
#ifdef DINO_TESTED
{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00096 }, /* DINO PS/2 */
{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00096 }, /* DINO PS/2 */
#endif
{ 0, } /* 0 terminated list */
};
......
drivers/input/serio/i8042.c
View file @ 7e1bfc50
......@@ -2,6 +2,7 @@
* i8042 keyboard and mouse controller driver for Linux
*
* Copyright (c) 1999-2002 Vojtech Pavlik
* Copyright (c) 2004 Dmitry Torokhov
*/
/*
......@@ -74,6 +75,14 @@ struct i8042_values {
unsigned char *phys;
};
#define I8042_QUEUE_LEN 64
struct {
unsigned char str[I8042_QUEUE_LEN];
unsigned char data[I8042_QUEUE_LEN];
unsigned int read_pos;
unsigned int write_pos;
} i8042_buf;
static struct serio i8042_kbd_port;
static struct serio i8042_aux_port;
static unsigned char i8042_initial_ctr;
......@@ -82,7 +91,7 @@ static unsigned char i8042_mux_open;
static unsigned char i8042_mux_present;
static unsigned char i8042_sysdev_initialized;
static struct pm_dev *i8042_pm_dev;
struct timer_list i8042_timer;
static struct timer_list i8042_timer;
/*
* Shared IRQ's require a device pointer, but this driver doesn't support
......@@ -150,7 +159,7 @@ static int i8042_flush(void)
*/
static int i8042_command(unsigned char *param, int command)
{
{
unsigned long flags;
int retval = 0, i = 0;
......@@ -161,7 +170,7 @@ static int i8042_command(unsigned char *param, int command)
dbg("%02x -> i8042 (command)", command & 0xff);
i8042_write_command(command & 0xff);
}
if (!retval)
for (i = 0; i < ((command >> 12) & 0xf); i++) {
if ((retval = i8042_wait_write())) break;
......@@ -172,7 +181,7 @@ static int i8042_command(unsigned char *param, int command)
if (!retval)
for (i = 0; i < ((command >> 8) & 0xf); i++) {
if ((retval = i8042_wait_read())) break;
if (i8042_read_status() & I8042_STR_AUXDATA)
if (i8042_read_status() & I8042_STR_AUXDATA)
param[i] = ~i8042_read_data();
else
param[i] = i8042_read_data();
......@@ -374,77 +383,109 @@ static char i8042_mux_short[4][16];
static char i8042_mux_phys[4][32];
/*
* i8042_interrupt() is the most important function in this driver -
* it handles the interrupts from the i8042, and sends incoming bytes
* to the upper layers.
* i8042_handle_data() is the most important function in this driver -
* it processes data received by i8042_interrupt and sends it to the
* upper layers.
*/
static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static void i8042_handle_data(unsigned long notused)
{
unsigned long flags;
unsigned char str, data = 0;
unsigned int dfl;
int ret;
mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
/*
* No locking it required on i8042_buf as the tasklet is guaranteed
* to be serialized and if write_pos changes while comparing it with
* read_pos another run will be scheduled by i8042_interrupt.
*/
while (i8042_buf.read_pos != i8042_buf.write_pos) {
spin_lock_irqsave(&i8042_lock, flags);
str = i8042_read_status();
if (str & I8042_STR_OBF)
data = i8042_read_data();
spin_unlock_irqrestore(&i8042_lock, flags);
str = i8042_buf.str[i8042_buf.read_pos];
data = i8042_buf.data[i8042_buf.read_pos];
if (~str & I8042_STR_OBF) {
if (irq) dbg("Interrupt %d, without any data", irq);
ret = 0;
goto out;
}
i8042_buf.read_pos++;
i8042_buf.read_pos %= I8042_QUEUE_LEN;
dfl = ((str & I8042_STR_PARITY) ? SERIO_PARITY : 0) |
((str & I8042_STR_TIMEOUT) ? SERIO_TIMEOUT : 0);
dfl = ((str & I8042_STR_PARITY) ? SERIO_PARITY : 0) |
((str & I8042_STR_TIMEOUT) ? SERIO_TIMEOUT : 0);
if (i8042_mux_values[0].exists && (str & I8042_STR_AUXDATA)) {
if (i8042_mux_values[0].exists && (str & I8042_STR_AUXDATA)) {
if (str & I8042_STR_MUXERR) {
switch (data) {
case 0xfd:
case 0xfe: dfl = SERIO_TIMEOUT; break;
case 0xff: dfl = SERIO_PARITY; break;
}
data = 0xfe;
} else dfl = 0;
if (str & I8042_STR_MUXERR) {
switch (data) {
case 0xfd:
case 0xfe: dfl = SERIO_TIMEOUT; break;
case 0xff: dfl = SERIO_PARITY; break;
}
data = 0xfe;
} else dfl = 0;
dbg("%02x <- i8042 (interrupt, aux%d, %d%s%s)",
data, (str >> 6), irq,
dfl & SERIO_PARITY ? ", bad parity" : "",
dfl & SERIO_TIMEOUT ? ", timeout" : "");
dbg("%02x <- i8042 (interrupt, aux%d, %d%s%s)",
data, (str >> 6), irq,
dfl & SERIO_PARITY ? ", bad parity" : "",
dfl & SERIO_TIMEOUT ? ", timeout" : "");
serio_interrupt(i8042_mux_port + ((str >> 6) & 3), data, dfl, regs);
goto irq_ret;
serio_interrupt(i8042_mux_port + ((str >> 6) & 3), data, dfl, NULL);
} else {
dbg("%02x <- i8042 (interrupt, %s, %d%s%s)",
data, (str & I8042_STR_AUXDATA) ? "aux" : "kbd", irq,
dfl & SERIO_PARITY ? ", bad parity" : "",
dfl & SERIO_TIMEOUT ? ", timeout" : "");
if (i8042_aux_values.exists && (str & I8042_STR_AUXDATA))
serio_interrupt(&i8042_aux_port, data, dfl, NULL);
else if (i8042_kbd_values.exists)
serio_interrupt(&i8042_kbd_port, data, dfl, NULL);
}
}
}
dbg("%02x <- i8042 (interrupt, %s, %d%s%s)",
data, (str & I8042_STR_AUXDATA) ? "aux" : "kbd", irq,
dfl & SERIO_PARITY ? ", bad parity" : "",
dfl & SERIO_TIMEOUT ? ", timeout" : "");
DECLARE_TASKLET(i8042_tasklet, i8042_handle_data, 0);
/*
* i8042_interrupt() handles the interrupts from i8042 and schedules
* i8042_handle_data to process and pass received bytes to the upper
* layers.
*/
static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
unsigned long flags;
unsigned char str;
unsigned int n_bytes = 0;
mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
if (i8042_aux_values.exists && (str & I8042_STR_AUXDATA)) {
serio_interrupt(&i8042_aux_port, data, dfl, regs);
goto irq_ret;
spin_lock_irqsave(&i8042_lock, flags);
while ((str = i8042_read_status()) & I8042_STR_OBF) {
n_bytes++;
i8042_buf.str[i8042_buf.write_pos] = str;
i8042_buf.data[i8042_buf.write_pos] = i8042_read_data();
i8042_buf.write_pos++;
i8042_buf.write_pos %= I8042_QUEUE_LEN;
if (unlikely(i8042_buf.write_pos == i8042_buf.read_pos))
printk(KERN_WARNING "i8042.c: ring buffer full\n");
}
if (!i8042_kbd_values.exists)
goto irq_ret;
spin_unlock_irqrestore(&i8042_lock, flags);
serio_interrupt(&i8042_kbd_port, data, dfl, regs);
if (unlikely(n_bytes == 0)) {
if (irq) dbg("Interrupt %d, without any data", irq);
return IRQ_NONE;
}
tasklet_schedule(&i8042_tasklet);
irq_ret:
ret = 1;
out:
return IRQ_RETVAL(ret);
return IRQ_HANDLED;
}
/*
* i8042_enable_mux_mode checks whether the controller has an active
* multiplexor and puts the chip into Multiplexed (as opposed to
......@@ -474,8 +515,17 @@ static int i8042_enable_mux_mode(struct i8042_values *values, unsigned char *mux
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0xa9)
return -1;
param = 0xa4;
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == 0x5b)
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == 0x5b) {
/*
* Do another loop test with the 0x5a value. Doing anything else upsets
* Profusion/ServerWorks OSB4 chipsets.
*/
param = 0x5a;
i8042_command(&param, I8042_CMD_AUX_LOOP);
return -1;
}
if (mux_version)
*mux_version = ~param;
......@@ -530,10 +580,10 @@ static int __init i8042_check_mux(struct i8042_values *values)
if (i8042_enable_mux_mode(values, &mux_version))
return -1;
/* Workaround for broken chips which seem to support MUX, but in reality don't. */
/* They all report version 12.10 */
if (mux_version == 0xCA)
/* They all report version 10.12 */
if (mux_version == 0xAC)
return -1;
printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
......@@ -598,7 +648,7 @@ static int __init i8042_check_aux(struct i8042_values *values)
/*
* Bit assignment test - filters out PS/2 i8042's in AT mode
*/
if (i8042_command(&param, I8042_CMD_AUX_DISABLE))
return -1;
if (i8042_command(&param, I8042_CMD_CTL_RCTR) || (~param & I8042_CTR_AUXDIS)) {
......@@ -609,7 +659,7 @@ static int __init i8042_check_aux(struct i8042_values *values)
if (i8042_command(&param, I8042_CMD_AUX_ENABLE))
return -1;
if (i8042_command(&param, I8042_CMD_CTL_RCTR) || (param & I8042_CTR_AUXDIS))
return -1;
return -1;
/*
* Disable the interface.
......@@ -639,7 +689,7 @@ static int __init i8042_port_register(struct i8042_values *values, struct serio
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
printk(KERN_WARNING "i8042.c: Can't write CTR while registering.\n");
values->exists = 0;
return -1;
return -1;
}
printk(KERN_INFO "serio: i8042 %s port at %#lx,%#lx irq %d\n",
......@@ -868,7 +918,7 @@ static int i8042_controller_resume(void)
static int i8042_notify_sys(struct notifier_block *this, unsigned long code,
void *unused)
{
if (code==SYS_DOWN || code==SYS_HALT)
if (code == SYS_DOWN || code == SYS_HALT)
i8042_controller_cleanup();
return NOTIFY_DONE;
}
......@@ -997,20 +1047,21 @@ void __exit i8042_exit(void)
sysdev_class_unregister(&kbc_sysclass);
}
del_timer_sync(&i8042_timer);
i8042_controller_cleanup();
if (i8042_kbd_values.exists)
serio_unregister_port(&i8042_kbd_port);
if (i8042_aux_values.exists)
serio_unregister_port(&i8042_aux_port);
for (i = 0; i < 4; i++)
if (i8042_mux_values[i].exists)
serio_unregister_port(i8042_mux_port + i);
del_timer_sync(&i8042_timer);
tasklet_kill(&i8042_tasklet);
i8042_platform_exit();
}
......
drivers/input/serio/parkbd.c
View file @ 7e1bfc50
This diff is collapsed.
drivers/input/serio/q40kbd.c
View file @ 7e1bfc50
......@@ -4,7 +4,7 @@
* Copyright (c) 2000-2001 Vojtech Pavlik
*
* Based on the work of:
* Richard Zidlicky <Richard.Zidlicky@stud.informatik.uni-erlangen.de>
* Richard Zidlicky <Richard.Zidlicky@stud.informatik.uni-erlangen.de>
*/
/*
......@@ -47,23 +47,12 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Q40 PS/2 keyboard controller driver");
MODULE_LICENSE("GPL");
static int q40kbd_open(struct serio *port)
{
return 0;
}
static void q40kbd_close(struct serio *port)
{
}
static struct serio q40kbd_port =
{
.type = SERIO_8042,
.name = "Q40 kbd port",
.phys = "Q40",
.write = NULL,
.open = q40kbd_open,
.close = q40kbd_close,
};
static irqreturn_t q40kbd_interrupt(int irq, void *dev_id,
......
drivers/input/serio/rpckbd.c
View file @ 7e1bfc50
......@@ -98,7 +98,7 @@ static int rpckbd_open(struct serio *port)
static void rpckbd_close(struct serio *port)
{
free_irq(IRQ_KEYBOARDRX, port);
free_irq(IRQ_KEYBOARDTX, port);
free_irq(IRQ_KEYBOARDTX, port);
}
static struct serio rpckbd_port =
......
drivers/input/serio/serio.c
View file @ 7e1bfc50
This diff is collapsed.
drivers/input/serio/serport.c
View file @ 7e1bfc50
This diff is collapsed.
drivers/input/touchscreen/gunze.c
View file @ 7e1bfc50
This diff is collapsed.
drivers/input/touchscreen/h3600_ts_input.c
View file @ 7e1bfc50
This diff is collapsed.
drivers/usb/input/mtouchusb.c
View file @ 7e1bfc50
This diff is collapsed.
include/linux/input.h
View file @ 7e1bfc50
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7