Commit 7e6ee553 authored by Krishna Manikandan's avatar Krishna Manikandan Committed by Rob Clark

drm/msm/disp/dpu1: enable DATA_HCTL_EN for sc7280 target

The reset value of INTF_CONFIG2 register is changed
for SC7280 family. Changes are added to program
this register correctly based on the target.

DATA_HCTL_EN in INTF_CONFIG2 register allows data
to be transferred at a different rate than video
timing. When this is set, the number of data per
line follows DISPLAY_DATA_HCTL register value.
This change adds support to program these
registers for sc7280 target.
Signed-off-by: default avatarKrishna Manikandan <mkrishn@codeaurora.org>
Link: https://lore.kernel.org/r/1617685792-14376-5-git-send-email-mkrishn@codeaurora.orgSigned-off-by: default avatarRob Clark <robdclark@chromium.org>
parent b3652e87
......@@ -31,6 +31,8 @@
#define INTF_TEST_CTL 0x054
#define INTF_TP_COLOR0 0x058
#define INTF_TP_COLOR1 0x05C
#define INTF_CONFIG2 0x060
#define INTF_DISPLAY_DATA_HCTL 0x064
#define INTF_FRAME_LINE_COUNT_EN 0x0A8
#define INTF_FRAME_COUNT 0x0AC
#define INTF_LINE_COUNT 0x0B0
......@@ -93,7 +95,7 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
u32 active_hctl, display_hctl, hsync_ctl;
u32 polarity_ctl, den_polarity, hsync_polarity, vsync_polarity;
u32 panel_format;
u32 intf_cfg;
u32 intf_cfg, intf_cfg2 = 0, display_data_hctl = 0;
/* read interface_cfg */
intf_cfg = DPU_REG_READ(c, INTF_CONFIG);
......@@ -178,6 +180,13 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
(COLOR_8BIT << 4) |
(0x21 << 8));
if (ctx->cap->features & BIT(DPU_DATA_HCTL_EN)) {
intf_cfg2 |= BIT(4);
display_data_hctl = display_hctl;
DPU_REG_WRITE(c, INTF_CONFIG2, intf_cfg2);
DPU_REG_WRITE(c, INTF_DISPLAY_DATA_HCTL, display_data_hctl);
}
DPU_REG_WRITE(c, INTF_HSYNC_CTL, hsync_ctl);
DPU_REG_WRITE(c, INTF_VSYNC_PERIOD_F0, vsync_period * hsync_period);
DPU_REG_WRITE(c, INTF_VSYNC_PULSE_WIDTH_F0,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment