Commit 7e7d76c3 authored by Jesse Barnes's avatar Jesse Barnes Committed by Chris Wilson

drm/i915: use i915 and Ironlake CRTC enable/disable functions in prepare/commit

This will allow us to optimize our prepare/commit paths a bit better.
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
[ickle: minor tweak to handle the cursor across pipe resizing]
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
parent 4d12fe0b
......@@ -2478,16 +2478,60 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
}
}
static void intel_crtc_prepare (struct drm_crtc *crtc)
/* Prepare for a mode set.
*
* Note we could be a lot smarter here. We need to figure out which outputs
* will be enabled, which disabled (in short, how the config will changes)
* and perform the minimum necessary steps to accomplish that, e.g. updating
* watermarks, FBC configuration, making sure PLLs are programmed correctly,
* panel fitting is in the proper state, etc.
*/
static void i9xx_crtc_prepare(struct drm_crtc *crtc)
{
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
struct drm_device *dev = crtc->dev;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
intel_crtc->cursor_on = false;
intel_crtc_update_cursor(crtc);
i9xx_crtc_disable(crtc);
intel_clear_scanline_wait(dev);
}
static void intel_crtc_commit (struct drm_crtc *crtc)
static void i9xx_crtc_commit(struct drm_crtc *crtc)
{
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
struct drm_device *dev = crtc->dev;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
intel_update_watermarks(dev);
i9xx_crtc_enable(crtc);
intel_crtc->cursor_on = true;
intel_crtc_update_cursor(crtc);
}
static void ironlake_crtc_prepare(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
intel_crtc->cursor_on = false;
intel_crtc_update_cursor(crtc);
ironlake_crtc_disable(crtc);
intel_clear_scanline_wait(dev);
}
static void ironlake_crtc_commit(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
intel_update_watermarks(dev);
ironlake_crtc_enable(crtc);
intel_crtc->cursor_on = true;
intel_crtc_update_cursor(crtc);
}
void intel_encoder_prepare (struct drm_encoder *encoder)
......@@ -5184,14 +5228,12 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
return ret;
}
static const struct drm_crtc_helper_funcs intel_helper_funcs = {
static struct drm_crtc_helper_funcs intel_helper_funcs = {
.dpms = intel_crtc_dpms,
.mode_fixup = intel_crtc_mode_fixup,
.mode_set = intel_crtc_mode_set,
.mode_set_base = intel_pipe_set_base,
.mode_set_base_atomic = intel_pipe_set_base_atomic,
.prepare = intel_crtc_prepare,
.commit = intel_crtc_commit,
.load_lut = intel_crtc_load_lut,
};
......@@ -5241,6 +5283,15 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
intel_crtc->cursor_addr = 0;
intel_crtc->dpms_mode = -1;
if (HAS_PCH_SPLIT(dev)) {
intel_helper_funcs.prepare = ironlake_crtc_prepare;
intel_helper_funcs.commit = ironlake_crtc_commit;
} else {
intel_helper_funcs.prepare = i9xx_crtc_prepare;
intel_helper_funcs.commit = i9xx_crtc_commit;
}
drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
intel_crtc->busy = false;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment