ASoC: SOF: Compile and runtime IPC version selection

The new IPC4 version is only supported by Intel platforms, iMX, AMD and
MediaTek only uses the standard SOF IPC.
There is no need for these platforms to build kernel support for IPC4 as
it is just dead code for them.

SND_SOC_SOF_IPC3 and SND_SOC_SOF_INTEL_IPC4 is introduced to allow compile
time selection and exclusion of IPC implementations.

To avoid randconfig failures add also support for runtime selection of
the IPC ops in ipc.c based on sdev->pdata->ipc_type
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220614075618.28605-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/sof/Kconfig

@@ -252,6 +252,13 @@ config SND_SOC_SOF_PROBE_WORK_QUEUE
 	  When selected, the probe is handled in two steps, for example to
 	  avoid lockdeps if request_module is used in the probe.
 
+# Supported IPC versions
+config SND_SOC_SOF_IPC3
+	bool
+
+config SND_SOC_SOF_INTEL_IPC4
+	bool
+
 source "sound/soc/sof/amd/Kconfig"
 source "sound/soc/sof/imx/Kconfig"
 source "sound/soc/sof/intel/Kconfig"

sound/soc/sof/Makefile

 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
 
 snd-sof-objs := core.o ops.o loader.o ipc.o pcm.o pm.o debug.o topology.o\
-		control.o trace.o iomem-utils.o sof-audio.o stream-ipc.o\
-		ipc3-topology.o ipc3-control.o ipc3.o ipc3-pcm.o ipc3-loader.o\
-		ipc3-dtrace.o\
-		ipc4.o ipc4-loader.o ipc4-topology.o ipc4-control.o ipc4-pcm.o
+		control.o trace.o iomem-utils.o sof-audio.o stream-ipc.o
+
+# IPC implementations
+ifneq ($(CONFIG_SND_SOC_SOF_IPC3),)
+snd-sof-objs +=	ipc3.o ipc3-loader.o ipc3-topology.o ipc3-control.o ipc3-pcm.o\
+		ipc3-dtrace.o
+endif
+ifneq ($(CONFIG_SND_SOC_SOF_INTEL_IPC4),)
+snd-sof-objs += ipc4.o ipc4-loader.o ipc4-topology.o ipc4-control.o ipc4-pcm.o
+endif
+
+# SOF client support
 ifneq ($(CONFIG_SND_SOC_SOF_CLIENT),)
 snd-sof-objs += sof-client.o
 endif

sound/soc/sof/amd/Kconfig

@@ -17,6 +17,7 @@ if SND_SOC_SOF_AMD_TOPLEVEL
 config SND_SOC_SOF_AMD_COMMON
 	tristate
 	select SND_SOC_SOF
+	select SND_SOC_SOF_IPC3
 	select SND_SOC_SOF_PCI_DEV
 	select SND_AMD_ACP_CONFIG
 	select SND_SOC_ACPI if ACPI

sound/soc/sof/imx/Kconfig

@@ -15,6 +15,7 @@ config SND_SOC_SOF_IMX_COMMON
 	tristate
 	select SND_SOC_SOF_OF_DEV
 	select SND_SOC_SOF
+	select SND_SOC_SOF_IPC3
 	select SND_SOC_SOF_XTENSA
 	select SND_SOC_SOF_COMPRESS
 	help

sound/soc/sof/intel/Kconfig

@@ -40,6 +40,7 @@ if SND_SOC_SOF_ACPI
 config SND_SOC_SOF_BAYTRAIL
 	tristate "SOF support for Baytrail, Braswell and Cherrytrail"
 	default SND_SOC_SOF_ACPI
+	select SND_SOC_SOF_IPC3
 	select SND_SOC_SOF_INTEL_COMMON
 	select SND_SOC_SOF_INTEL_ATOM_HIFI_EP
 	select SND_SOC_SOF_ACPI_DEV
@@ -60,6 +61,7 @@ config SND_SOC_SOF_BAYTRAIL
 config SND_SOC_SOF_BROADWELL
 	tristate "SOF support for Broadwell"
 	default SND_SOC_SOF_ACPI
+	select SND_SOC_SOF_IPC3
 	select SND_SOC_SOF_INTEL_COMMON
 	select SND_SOC_SOF_INTEL_HIFI_EP_IPC
 	select SND_SOC_SOF_ACPI_DEV
@@ -85,6 +87,7 @@ config SND_SOC_SOF_MERRIFIELD
 	tristate "SOF support for Tangier/Merrifield"
 	default SND_SOC_SOF_PCI
 	select SND_SOC_SOF_PCI_DEV
+	select SND_SOC_SOF_IPC3
 	select SND_SOC_SOF_INTEL_ATOM_HIFI_EP
 	help
 	  This adds support for Sound Open Firmware for Intel(R) platforms
@@ -95,6 +98,8 @@ config SND_SOC_SOF_MERRIFIELD
 config SND_SOC_SOF_INTEL_APL
 	tristate
 	select SND_SOC_SOF_HDA_COMMON
+	select SND_SOC_SOF_IPC3
+	select SND_SOC_SOF_INTEL_IPC4
 
 config SND_SOC_SOF_APOLLOLAKE
 	tristate "SOF support for Apollolake"
@@ -120,6 +125,8 @@ config SND_SOC_SOF_INTEL_CNL
 	tristate
 	select SND_SOC_SOF_HDA_COMMON
 	select SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE
+	select SND_SOC_SOF_IPC3
+	select SND_SOC_SOF_INTEL_IPC4
 
 config SND_SOC_SOF_CANNONLAKE
 	tristate "SOF support for Cannonlake"
@@ -154,6 +161,8 @@ config SND_SOC_SOF_INTEL_ICL
 	tristate
 	select SND_SOC_SOF_HDA_COMMON
 	select SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE
+	select SND_SOC_SOF_IPC3
+	select SND_SOC_SOF_INTEL_IPC4
 
 config SND_SOC_SOF_ICELAKE
 	tristate "SOF support for Icelake"
@@ -179,6 +188,8 @@ config SND_SOC_SOF_INTEL_TGL
 	tristate
 	select SND_SOC_SOF_HDA_COMMON
 	select SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE
+	select SND_SOC_SOF_IPC3
+	select SND_SOC_SOF_INTEL_IPC4
 
 config SND_SOC_SOF_TIGERLAKE
 	tristate "SOF support for Tigerlake"

sound/soc/sof/ipc.c

@@ -155,12 +155,22 @@ struct snd_sof_ipc *snd_sof_ipc_init(struct snd_sof_dev *sdev)
 
 	init_waitqueue_head(&msg->waitq);
 
-	/*
-	 * Use IPC3 ops as it is the only available version now. With the addition of new IPC
-	 * versions, this will need to be modified to use the selected version at runtime.
-	 */
-	ipc->ops = &ipc3_ops;
-	ops = ipc->ops;
+	switch (sdev->pdata->ipc_type) {
+#if defined(CONFIG_SND_SOC_SOF_IPC3)
+	case SOF_IPC:
+		ops = &ipc3_ops;
+		break;
+#endif
+#if defined(CONFIG_SND_SOC_SOF_INTEL_IPC4)
+	case SOF_INTEL_IPC4:
+		ops = &ipc4_ops;
+		break;
+#endif
+	default:
+		dev_err(sdev->dev, "Not supported IPC version: %d\n",
+			sdev->pdata->ipc_type);
+		return NULL;
+	}
 
 	/* check for mandatory ops */
 	if (!ops->tx_msg || !ops->rx_msg || !ops->set_get_data || !ops->get_reply) {
@@ -190,6 +200,8 @@ struct snd_sof_ipc *snd_sof_ipc_init(struct snd_sof_dev *sdev)
 		return NULL;
 	}
 
+	ipc->ops = ops;
+
 	return ipc;
 }
 EXPORT_SYMBOL(snd_sof_ipc_init);

sound/soc/sof/mediatek/Kconfig

@@ -15,6 +15,7 @@ config SND_SOC_SOF_MTK_COMMON
 	tristate
 	select SND_SOC_SOF_OF_DEV
 	select SND_SOC_SOF
+	select SND_SOC_SOF_IPC3
 	select SND_SOC_SOF_XTENSA
 	select SND_SOC_SOF_COMPRESS
 	help