V4L/DVB (10121): em28xx: remove worthless Pinnacle PCTV HD Mini 80e device profile

The Pinnacle 80e cannot be supported since Micronas yanked their driver
support for the drx-j chipset at the last minute.  Remove the device profile
since it cannot work without the drx driver and it being there is only likely
to confuse people into thinking the device is supported but not working.
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Documentation/video4linux/CARDLIST.em28xx

@@ -56,6 +56,5 @@
  56 -> Pinnacle Hybrid Pro (2)                  (em2882)        [2304:0226]
  57 -> Kworld PlusTV HD Hybrid 330              (em2883)        [eb1a:a316]
  58 -> Compro VideoMate ForYou/Stereo           (em2820/em2840) [185b:2041]
- 59 -> Pinnacle PCTV HD Mini                    (em2874)        [2304:023f]
  60 -> Hauppauge WinTV HVR 850                  (em2883)        [2040:651f]
  61 -> Pixelview PlayTV Box 4 USB 2.0           (em2820/em2840)

drivers/media/video/em28xx/em28xx-cards.c

@@ -110,17 +110,6 @@ static struct em28xx_reg_seq default_tuner_gpio[] = {
 	{  -1,			-1,		-1,		-1},
 };
 
-/* Pinnacle PCTV HD Mini (80e) GPIOs
-   0-5: not used
-   6:   demod reset, active low
-   7:   LED on, active high */
-static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = {
-	{EM28XX_R06_I2C_CLK,    0x45,   0xff,		  10}, /*400 KHz*/
-	{EM2874_R80_GPIO,       0x80,   0xff,		  100},/*Demod reset*/
-	{EM2874_R80_GPIO,       0xc0,   0xff,		  10},
-	{  -1,			-1,	-1,		  -1},
-};
-
 /*
  *  Board definitions
  */
@@ -1228,27 +1217,6 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
-
-	/* em2874 tuners are DVB only */
-
-	[EM2874_BOARD_PINNACLE_PCTV_80E] = {
-		.name         = "Pinnacle PCTV HD Mini",
-		.tuner_type   = TUNER_ABSENT,
-		.has_dvb      = 1,
-		.dvb_gpio     = em2874_pinnacle_80e_digital,
-		.ir_codes     = ir_codes_pinnacle_pctv_hd,
-		.decoder      = EM28XX_NODECODER,
-		.i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE |
-				EM2874_I2C_SECONDARY_BUS_SELECT |
-				EM28XX_I2C_FREQ_400_KHZ,
-#ifdef DJH_DEBUG
-		.input        = { {
-			.type     = EM28XX_VMUX_TELEVISION,
-			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = EM28XX_AMUX_LINE_IN,
-		} },
-#endif
-	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
@@ -1342,8 +1310,6 @@ struct usb_device_id em28xx_id_table [] = {
 			.driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
 	{ USB_DEVICE(0x2304, 0x0227),
 			.driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
-	{ USB_DEVICE(0x2304, 0x023f),
-			.driver_info = EM2874_BOARD_PINNACLE_PCTV_80E },
 	{ USB_DEVICE(0x0413, 0x6023),
 			.driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
 	{ USB_DEVICE(0x093b, 0xa005),

drivers/media/video/em28xx/em28xx.h

@@ -96,7 +96,6 @@
 #define EM2882_BOARD_PINNACLE_HYBRID_PRO	  56
 #define EM2883_BOARD_KWORLD_HYBRID_A316		  57
 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU	  58
-#define EM2874_BOARD_PINNACLE_PCTV_80E		  59
 #define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850	  60
 #define EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2	  61