ie31200_edac: Introduce the driver

Add a driver for the E3-1200 series of Intel DRAM controllers, based on
the following E3-1200 specs:

http://www.intel.com/content/www/us/en/processors/xeon/xeon-e3-1200-family-vol-2-datasheet.html
http://www.intel.com/content/www/us/en/processors/xeon/xeon-e3-1200v3-vol-2-datasheet.html

I've tested this on bad memory hardware, and observed correlating bad
reads and uncorrected memory errors as reported by the driver.

Tested against:

CPU E3-1270 v3 @ 3.50GHz : 8086:0c08 (haswell)
CPU E3-1270 V2 @ 3.50GHz : 8086:0158 (ivy bridge)
CPU E31270 @ 3.40GHz : 8086:0108 (sandy bridge)
Signed-off-by: Jason Baron <jbaron@akamai.com>
Link: http://lkml.kernel.org/r/95c83e80dd40b5377e8bb206285c5d95ac623872.1403818526.git.jbaron@akamai.com
[ Boris: realign defines ]
Signed-off-by: Borislav Petkov <bp@suse.de>

drivers/edac/Kconfig

@@ -186,6 +186,13 @@ config EDAC_I3200
 	  Support for error detection and correction on the Intel
 	  3200 and 3210 server chipsets.
 
+config EDAC_IE31200
+	tristate "Intel e312xx"
+	depends on EDAC_MM_EDAC && PCI && X86
+	help
+	  Support for error detection and correction on the Intel
+	  E3-1200 based DRAM controllers.
+
 config EDAC_X38
 	tristate "Intel X38"
 	depends on EDAC_MM_EDAC && PCI && X86

drivers/edac/Makefile

@@ -37,6 +37,7 @@ obj-$(CONFIG_EDAC_I82875P)		+= i82875p_edac.o
 obj-$(CONFIG_EDAC_I82975X)		+= i82975x_edac.o
 obj-$(CONFIG_EDAC_I3000)		+= i3000_edac.o
 obj-$(CONFIG_EDAC_I3200)		+= i3200_edac.o
+obj-$(CONFIG_EDAC_IE31200)		+= ie31200_edac.o
 obj-$(CONFIG_EDAC_X38)			+= x38_edac.o
 obj-$(CONFIG_EDAC_I82860)		+= i82860_edac.o
 obj-$(CONFIG_EDAC_R82600)		+= r82600_edac.o