Commit 7f2ce168 authored by Alex Elder's avatar Alex Elder Committed by Mike Turquette

ARM: dts: define clock binding for bcm21664

Document the device tree binding for Broadcom BCM28164 clock control
units and clocks.  This SoC uses Kona CCUs, similar to the BCM281XX
SoC family.
Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarMike Turquette <mturquette@linaro.org>
parent 5bcb5926
......@@ -98,3 +98,42 @@ be used. These specifiers are defined in:
slave bsc2 peri 7 BCM281XX_SLAVE_CCU_BSC2
slave bsc3 peri 8 BCM281XX_SLAVE_CCU_BSC3
slave pwm peri 9 BCM281XX_SLAVE_CCU_PWM
BCM21664 family
---------------
CCU compatible string values for SoCs in the BCM21664 family are:
"brcm,bcm21664-root-ccu"
"brcm,bcm21664-aon-ccu"
"brcm,bcm21664-master-ccu"
"brcm,bcm21664-slave-ccu"
The following table defines the set of CCUs and clock specifiers for
BCM21664 family clocks. When a clock consumer references a clocks,
its symbolic specifier (rather than its numeric index value) should
be used. These specifiers are defined in:
"include/dt-bindings/clock/bcm21664.h"
CCU Clock Type Index Specifier
--- ----- ---- ----- ---------
root frac_1m peri 0 BCM21664_ROOT_CCU_FRAC_1M
aon hub_timer peri 0 BCM21664_AON_CCU_HUB_TIMER
master sdio1 peri 0 BCM21664_MASTER_CCU_SDIO1
master sdio2 peri 1 BCM21664_MASTER_CCU_SDIO2
master sdio3 peri 2 BCM21664_MASTER_CCU_SDIO3
master sdio4 peri 3 BCM21664_MASTER_CCU_SDIO4
master sdio1_sleep peri 4 BCM21664_MASTER_CCU_SDIO1_SLEEP
master sdio2_sleep peri 5 BCM21664_MASTER_CCU_SDIO2_SLEEP
master sdio3_sleep peri 6 BCM21664_MASTER_CCU_SDIO3_SLEEP
master sdio4_sleep peri 7 BCM21664_MASTER_CCU_SDIO4_SLEEP
slave uartb peri 0 BCM21664_SLAVE_CCU_UARTB
slave uartb2 peri 1 BCM21664_SLAVE_CCU_UARTB2
slave uartb3 peri 2 BCM21664_SLAVE_CCU_UARTB3
slave uartb4 peri 3 BCM21664_SLAVE_CCU_UARTB4
slave bsc1 peri 4 BCM21664_SLAVE_CCU_BSC1
slave bsc2 peri 5 BCM21664_SLAVE_CCU_BSC2
slave bsc3 peri 6 BCM21664_SLAVE_CCU_BSC3
slave bsc4 peri 7 BCM21664_SLAVE_CCU_BSC4
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment