arm64: dts: qcom: Add msm8916 I2C nodes.

This patch adds missing support for i2c0 and i2c6, this support is
required to connect the i2c slaves on LS expansion on DB410c.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

arch/arm64/boot/dts/qcom/msm8916-pins.dtsi

@@ -265,6 +265,30 @@ pinconf {
 		};
 	};
 
+	i2c2_default: i2c2_default {
+		pinmux {
+			function = "blsp_i2c2";
+			pins = "gpio6", "gpio7";
+		};
+		pinconf {
+			pins = "gpio6", "gpio7";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c2_sleep: i2c2_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio6", "gpio7";
+		};
+		pinconf {
+			pins = "gpio6", "gpio7";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
 	i2c4_default: i2c4_default {
 		pinmux {
 			function = "blsp_i2c4";
@@ -289,6 +313,30 @@ pinconf {
 		};
 	};
 
+	i2c6_default: i2c6_default {
+		pinmux {
+			function = "blsp_i2c6";
+			pins = "gpio22", "gpio23";
+		};
+		pinconf {
+			pins = "gpio22", "gpio23";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c6_sleep: i2c6_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio22", "gpio23";
+		};
+		pinconf {
+			pins = "gpio22", "gpio23";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
 	sdhc2_cd_pin {
 		sdc2_cd_on: cd_on {
 			pinmux {

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -233,6 +233,21 @@ blsp_spi6: spi@78ba000 {
 			status = "disabled";
 		};
 
+		blsp_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78b6000 0x1000>;
+			interrupts = <GIC_SPI 96 0>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_default>;
+			pinctrl-1 = <&i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		blsp_i2c4: i2c@78b8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x78b8000 0x1000>;
@@ -248,6 +263,21 @@ blsp_i2c4: i2c@78b8000 {
 			status = "disabled";
 		};
 
+		blsp_i2c6: i2c@78ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78ba000 0x1000>;
+			interrupts = <GIC_SPI 100 0>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c6_default>;
+			pinctrl-1 = <&i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		sdhc_1: sdhci@07824000 {
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0x07824900 0x11c>, <0x07824000 0x800>;