Commit 7f9f4678 authored by Haavard Skinnemoen's avatar Haavard Skinnemoen

[AVR32] Add PIOE device and reserve SDRAM pins

The PIOE device was left out before because it muxes SDRAM pins (and
is therefore a bit dangerous to mess with) and because no existing
drivers had any use for it.

It is needed for CompactFlash, however, and now that we have a way
to protect the SDRAM pins, it can be safely added.
Signed-off-by: default avatarHaavard Skinnemoen <hskinnemoen@atmel.com>
parent e7f70b8c
......@@ -19,6 +19,7 @@
#include <asm/setup.h>
#include <asm/arch/board.h>
#include <asm/arch/init.h>
#include <asm/arch/portmux.h>
#define SW2_DEFAULT /* MMCI and UART_A available */
......@@ -102,6 +103,28 @@ void __init setup_board(void)
static int __init atstk1002_init(void)
{
/*
* ATSTK1000 uses 32-bit SDRAM interface. Reserve the
* SDRAM-specific pins so that nobody messes with them.
*/
at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */
at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */
at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */
at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */
at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */
at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */
at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */
at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */
at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */
at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */
at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */
at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */
at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */
at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */
at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */
at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */
at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */
at32_add_system_devices();
#ifdef SW2_DEFAULT
......
......@@ -496,6 +496,13 @@ static struct resource pio3_resource[] = {
DEFINE_DEV(pio, 3);
DEV_CLK(mck, pio3, pba, 13);
static struct resource pio4_resource[] = {
PBMEM(0xffe03800),
IRQ(17),
};
DEFINE_DEV(pio, 4);
DEV_CLK(mck, pio4, pba, 14);
void __init at32_add_system_devices(void)
{
system_manager.eim_first_irq = EIM_IRQ_BASE;
......@@ -509,6 +516,7 @@ void __init at32_add_system_devices(void)
platform_device_register(&pio1_device);
platform_device_register(&pio2_device);
platform_device_register(&pio3_device);
platform_device_register(&pio4_device);
}
/* --------------------------------------------------------------------
......@@ -860,6 +868,7 @@ struct clk *at32_clock_list[] = {
&pio1_mck,
&pio2_mck,
&pio3_mck,
&pio4_mck,
&atmel_usart0_usart,
&atmel_usart1_usart,
&atmel_usart2_usart,
......@@ -880,6 +889,7 @@ void __init at32_portmux_init(void)
at32_init_pio(&pio1_device);
at32_init_pio(&pio2_device);
at32_init_pio(&pio3_device);
at32_init_pio(&pio4_device);
}
void __init at32_clock_init(void)
......
......@@ -24,10 +24,12 @@
#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N))
#endif /* __ASM_ARCH_AT32AP7000_H__ */
......@@ -7,7 +7,7 @@
#define AT32_EXTINT(n) (EIM_IRQ_BASE + (n))
#define GPIO_IRQ_BASE (EIM_IRQ_BASE + NR_EIM_IRQS)
#define NR_GPIO_IRQS (4 * 32)
#define NR_GPIO_IRQS (5 * 32)
#define NR_IRQS (GPIO_IRQ_BASE + NR_GPIO_IRQS)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment