Merge tag 'spi-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc

Pull spi updates from Mark Brown:
 "No framework work here, only a bunch of driver updates of varying
  sizes:

   - Factoring out of the core hardware support from the MXS MMC driver
     by Marek Vasut to allow the hardware to also be used for SPI.
   - Lots of error handling cleanups from Guenter Roeck
   - Removal of the existing Tegra driver which is quite comprehensively
     broken as detailed in the changelog for the removal.
   - DT suppport for the PL022 and GPIO drivers.
   - pinctrl support for OMAP and PL022."

Pulling from Mark Brown as Grant Likely is still busy moving.

* tag 'spi-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: (53 commits)
  spi: remove completely broken Tegra driver
  spi/imx: set the inactive state of the clock according to the clock polarity
  spi/pl022: get/put resources on suspend/resume
  spi/pl022: use more managed resources
  spi/pl022: Devicetree support w/o platform data
  spi/s3c64xx: Don't free controller_data on non-dt platforms
  spi: omap2-mcspi: add pinctrl support
  spi/pl022: adopt pinctrl support
  spi: omap2-mcspi: Cleanup the omap2_mcspi_txrx_dma function
  spi/gpio: Fix stub for spi_gpio_probe_dt()
  spi/mxs: Make the SPI block clock speed configurable via DT
  spi: spi-sh-hspi: drop frees of devm_ alloc'd data
  spi/pl022: Fix chipselects pointer computation
  spi: spi-tle62x0: Use module_spi_driver macro
  mxs/spi: Rework the mxs_ssp_timeout to be more readable
  mxs/spi: Decrement the DMA/PIO border
  mxs/spi: Increment the transfer length only if transfer succeeded
  mxs/spi: Fix issues when doing long continuous transfer
  spi: spi-gpio: Add DT bindings
  spi: spi-gpio: store chipselect information in private structure
  ...

Documentation/devicetree/bindings/spi/mxs-spi.txt

+* Freescale MX233/MX28 SSP/SPI
+
+Required properties:
+- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28"
+- reg: Offset and length of the register set for the device
+- interrupts: Should contain SSP interrupts (error irq first, dma irq second)
+- fsl,ssp-dma-channel: APBX DMA channel for the SSP
+
+Optional properties:
+- clock-frequency : Input clock frequency to the SPI block in Hz.
+		    Default is 160000000 Hz.
+
+Example:
+
+ssp0: ssp@80010000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	reg = <0x80010000 0x2000>;
+	interrupts = <96 82>;
+	fsl,ssp-dma-channel = <0>;
+};

Documentation/devicetree/bindings/spi/spi-bus.txt

@@ -21,6 +21,9 @@ assumption that board specific platform code will be used to manage
 chip selects.  Individual drivers can define additional properties to
 support describing the chip select layout.
 
+Optional property:
+- num-cs : total number of chipselects
+
 SPI slave nodes must be children of the SPI master node and can
 contain the following properties.
 - reg             - (required) chip select address of device.

Documentation/devicetree/bindings/spi/spi-gpio.txt

+SPI-GPIO devicetree bindings
+
+Required properties:
+
+ - compatible: should be set to "spi-gpio"
+ - #address-cells: should be set to <0x1>
+ - ranges
+ - gpio-sck: GPIO spec for the SCK line to use
+ - gpio-miso: GPIO spec for the MISO line to use
+ - gpio-mosi: GPIO spec for the MOSI line to use
+ - cs-gpios: GPIOs to use for chipselect lines
+ - num-chipselects: number of chipselect lines
+
+Example:
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <0x1>;
+		ranges;
+
+		gpio-sck = <&gpio 95 0>;
+		gpio-miso = <&gpio 98 0>;
+		gpio-mosi = <&gpio 97 0>;
+		cs-gpios = <&gpio 125 0>;
+		num-chipselects = <1>;
+
+		/* clients */
+	};
+

Documentation/devicetree/bindings/spi/spi-sc18is602.txt

+NXP SC18IS602/SCIS603
+
+Required properties:
+	- compatible : Should be one of
+		"nxp,sc18is602"
+		"nxp,sc18is602b"
+		"nxp,sc18is603"
+	- reg: I2C bus address
+
+Optional properties:
+	- clock-frequency : external oscillator clock frequency. If not
+	  specified, the SC18IS602 default frequency (7372000) will be used.
+
+The clock-frequency property is relevant and needed only if the chip has an
+external oscillator (SC18IS603).
+
+Example:
+
+	sc18is603@28 {
+		compatible = "nxp,sc18is603";
+		reg = <0x28>;
+		clock-frequency = <14744000>;
+	}

Documentation/devicetree/bindings/spi/spi_pl022.txt

@@ -6,7 +6,29 @@ Required properties:
 - interrupts : Should contain SPI controller interrupt
 
 Optional properties:
+- num-cs : total number of chipselects
 - cs-gpios : should specify GPIOs used for chipselects.
   The gpios will be referred to as reg = <index> in the SPI child nodes.
   If unspecified, a single SPI device without a chip select can be used.
+- pl022,autosuspend-delay : delay in ms following transfer completion before
+			    the runtime power management system suspends the
+			    device. A setting of 0 indicates no delay and the
+                            device will be suspended immediately
+- pl022,rt : indicates the controller should run the message pump with realtime
+             priority to minimise the transfer latency on the bus (boolean)
+
+
+SPI slave nodes must be children of the SPI master node and can
+contain the following properties.
+
+- pl022,interface : interface type:
+	0: SPI
+	1: Texas Instruments Synchronous Serial Frame Format
+	2: Microwire (Half Duplex)
+- pl022,com-mode : polling, interrupt or dma
+- pl022,rx-level-trig : Rx FIFO watermark level
+- pl022,tx-level-trig : Tx FIFO watermark level
+- pl022,ctrl-len : Microwire interface: Control length
+- pl022,wait-state : Microwire interface: Wait state
+- pl022,duplex : Microwire interface: Full/Half duplex
 

Documentation/spi/spi-sc18is602

+Kernel driver spi-sc18is602
+===========================
+
+Supported chips:
+  * NXP SI18IS602/602B/603
+    Datasheet: http://www.nxp.com/documents/data_sheet/SC18IS602_602B_603.pdf
+
+Author:
+        Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver provides connects a NXP SC18IS602/603 I2C-bus to SPI bridge to the
+kernel's SPI core subsystem.
+
+The driver does not probe for supported chips, since the SI18IS602/603 does not
+support Chip ID registers. You will have to instantiate the devices explicitly.
+Please see Documentation/i2c/instantiating-devices for details.
+
+
+Usage Notes
+-----------
+
+This driver requires the I2C adapter driver to support raw I2C messages. I2C
+adapter drivers which can only handle the SMBus protocol are not supported.
+
+The maximum SPI message size supported by SC18IS602/603 is 200 bytes. Attempts
+to initiate longer transfers will fail with -EINVAL. EEPROM read operations and
+similar large accesses have to be split into multiple chunks of no more than
+200 bytes per SPI message (128 bytes of data per message is recommended). This
+means that programs such as "cp" or "od", which automatically use large block
+sizes to access a device, can not be used directly to read data from EEPROM.
+Programs such as dd, where the block size can be specified, should be used
+instead.

arch/arm/mach-u300/core.c

@@ -1556,9 +1556,6 @@ static struct u300_mux_hog u300_mux_hogs[] = {
 	{
 		.dev = &uart0_device.dev,
 	},
-	{
-		.dev = &pl022_device.dev,
-	},
 	{
 		.dev = &mmcsd_device.dev,
 	},

drivers/clk/mxs/Makefile

@@ -2,7 +2,7 @@
 # Makefile for mxs specific clk
 #
 
-obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o
+obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o clk-ssp.o
 
 obj-$(CONFIG_SOC_IMX23) += clk-imx23.o
 obj-$(CONFIG_SOC_IMX28) += clk-imx28.o

drivers/clk/mxs/clk-ssp.c

+/*
+ * Copyright 2012 DENX Software Engineering, GmbH
+ *
+ * Pulled from code:
+ * Portions copyright (C) 2003 Russell King, PXA MMCI Driver
+ * Portions copyright (C) 2004-2005 Pierre Ossman, W83L51xD SD/MMC driver
+ *
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/spi/mxs-spi.h>
+
+void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate)
+{
+	unsigned int ssp_clk, ssp_sck;
+	u32 clock_divide, clock_rate;
+	u32 val;
+
+	ssp_clk = clk_get_rate(ssp->clk);
+
+	for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) {
+		clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide);
+		clock_rate = (clock_rate > 0) ? clock_rate - 1 : 0;
+		if (clock_rate <= 255)
+			break;
+	}
+
+	if (clock_divide > 254) {
+		dev_err(ssp->dev,
+			"%s: cannot set clock to %d\n", __func__, rate);
+		return;
+	}
+
+	ssp_sck = ssp_clk / clock_divide / (1 + clock_rate);
+
+	val = readl(ssp->base + HW_SSP_TIMING(ssp));
+	val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
+	val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE);
+	val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE);
+	writel(val, ssp->base + HW_SSP_TIMING(ssp));
+
+	ssp->clk_rate = ssp_sck;
+
+	dev_dbg(ssp->dev,
+		"%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n",
+		__func__, clock_divide, clock_rate, ssp_clk, ssp_sck, rate);
+}
+EXPORT_SYMBOL_GPL(mxs_ssp_set_clk_rate);

drivers/spi/Kconfig

@@ -325,6 +325,12 @@ config SPI_S3C64XX
 	help
 	  SPI driver for Samsung S3C64XX and newer SoCs.
 
+config SPI_SC18IS602
+	tristate "NXP SC18IS602/602B/603 I2C to SPI bridge"
+	depends on I2C
+	help
+	  SPI driver for NXP SC18IS602/602B/603 I2C to SPI bridge.
+
 config SPI_SH_MSIOF
 	tristate "SuperH MSIOF SPI controller"
 	depends on SUPERH && HAVE_CLK
@@ -364,11 +370,12 @@ config SPI_STMP3XXX
 	help
 	  SPI driver for Freescale STMP37xx/378x SoC SSP interface
 
-config SPI_TEGRA
-	tristate "Nvidia Tegra SPI controller"
-	depends on ARCH_TEGRA && TEGRA20_APB_DMA
+config SPI_MXS
+	tristate "Freescale MXS SPI controller"
+	depends on ARCH_MXS
+	select STMP_DEVICE
 	help
-	  SPI driver for NVidia Tegra SoCs
+	  SPI driver for Freescale MXS devices.
 
 config SPI_TI_SSP
 	tristate "TI Sequencer Serial Port - SPI Support"

drivers/spi/Makefile

@@ -36,6 +36,7 @@ obj-$(CONFIG_SPI_LM70_LLP)		+= spi-lm70llp.o
 obj-$(CONFIG_SPI_MPC512x_PSC)		+= spi-mpc512x-psc.o
 obj-$(CONFIG_SPI_MPC52xx_PSC)		+= spi-mpc52xx-psc.o
 obj-$(CONFIG_SPI_MPC52xx)		+= spi-mpc52xx.o
+obj-$(CONFIG_SPI_MXS)			+= spi-mxs.o
 obj-$(CONFIG_SPI_NUC900)		+= spi-nuc900.o
 obj-$(CONFIG_SPI_OC_TINY)		+= spi-oc-tiny.o
 obj-$(CONFIG_SPI_OMAP_UWIRE)		+= spi-omap-uwire.o
@@ -51,13 +52,13 @@ obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o
 spi-s3c24xx-hw-y			:= spi-s3c24xx.o
 spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
 obj-$(CONFIG_SPI_S3C64XX)		+= spi-s3c64xx.o
+obj-$(CONFIG_SPI_SC18IS602)		+= spi-sc18is602.o
 obj-$(CONFIG_SPI_SH)			+= spi-sh.o
 obj-$(CONFIG_SPI_SH_HSPI)		+= spi-sh-hspi.o
 obj-$(CONFIG_SPI_SH_MSIOF)		+= spi-sh-msiof.o
 obj-$(CONFIG_SPI_SH_SCI)		+= spi-sh-sci.o
 obj-$(CONFIG_SPI_SIRF)		+= spi-sirf.o
 obj-$(CONFIG_SPI_STMP3XXX)		+= spi-stmp.o
-obj-$(CONFIG_SPI_TEGRA)			+= spi-tegra.o
 obj-$(CONFIG_SPI_TI_SSP)		+= spi-ti-ssp.o
 obj-$(CONFIG_SPI_TLE62X0)		+= spi-tle62x0.o
 obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi-topcliff-pch.o

drivers/spi/spi-altera.c

@@ -307,8 +307,6 @@ static const struct of_device_id altera_spi_match[] = {
 	{},
 };
 MODULE_DEVICE_TABLE(of, altera_spi_match);
-#else /* CONFIG_OF */
-#define altera_spi_match NULL
 #endif /* CONFIG_OF */
 
 static struct platform_driver altera_spi_driver = {
@@ -318,7 +316,7 @@ static struct platform_driver altera_spi_driver = {
 		.name = DRV_NAME,
 		.owner = THIS_MODULE,
 		.pm = NULL,
-		.of_match_table = altera_spi_match,
+		.of_match_table = of_match_ptr(altera_spi_match),
 	},
 };
 module_platform_driver(altera_spi_driver);

drivers/spi/spi-gpio.c

@@ -22,6 +22,8 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
@@ -46,6 +48,7 @@ struct spi_gpio {
 	struct spi_bitbang		bitbang;
 	struct spi_gpio_platform_data	pdata;
 	struct platform_device		*pdev;
+	int				cs_gpios[0];
 };
 
 /*----------------------------------------------------------------------*/
@@ -89,15 +92,21 @@ struct spi_gpio {
 
 /*----------------------------------------------------------------------*/
 
-static inline const struct spi_gpio_platform_data * __pure
-spi_to_pdata(const struct spi_device *spi)
+static inline struct spi_gpio * __pure
+spi_to_spi_gpio(const struct spi_device *spi)
 {
 	const struct spi_bitbang	*bang;
-	const struct spi_gpio		*spi_gpio;
+	struct spi_gpio			*spi_gpio;
 
 	bang = spi_master_get_devdata(spi->master);
 	spi_gpio = container_of(bang, struct spi_gpio, bitbang);
-	return &spi_gpio->pdata;
+	return spi_gpio;
+}
+
+static inline struct spi_gpio_platform_data * __pure
+spi_to_pdata(const struct spi_device *spi)
+{
+	return &spi_to_spi_gpio(spi)->pdata;
 }
 
 /* this is #defined to avoid unused-variable warnings when inlining */
@@ -210,7 +219,8 @@ static u32 spi_gpio_spec_txrx_word_mode3(struct spi_device *spi,
 
 static void spi_gpio_chipselect(struct spi_device *spi, int is_active)
 {
-	unsigned long cs = (unsigned long) spi->controller_data;
+	struct spi_gpio *spi_gpio = spi_to_spi_gpio(spi);
+	unsigned int cs = spi_gpio->cs_gpios[spi->chip_select];
 
 	/* set initial clock polarity */
 	if (is_active)
@@ -224,12 +234,27 @@ static void spi_gpio_chipselect(struct spi_device *spi, int is_active)
 
 static int spi_gpio_setup(struct spi_device *spi)
 {
-	unsigned long	cs = (unsigned long) spi->controller_data;
-	int		status = 0;
+	unsigned int		cs;
+	int			status = 0;
+	struct spi_gpio		*spi_gpio = spi_to_spi_gpio(spi);
+	struct device_node	*np = spi->master->dev.of_node;
 
 	if (spi->bits_per_word > 32)
 		return -EINVAL;
 
+	if (np) {
+		/*
+		 * In DT environments, the CS GPIOs have already been
+		 * initialized from the "cs-gpios" property of the node.
+		 */
+		cs = spi_gpio->cs_gpios[spi->chip_select];
+	} else {
+		/*
+		 * ... otherwise, take it from spi->controller_data
+		 */
+		cs = (unsigned int) spi->controller_data;
+	}
+
 	if (!spi->controller_state) {
 		if (cs != SPI_GPIO_NO_CHIPSELECT) {
 			status = gpio_request(cs, dev_name(&spi->dev));
@@ -239,8 +264,12 @@ static int spi_gpio_setup(struct spi_device *spi)
 					!(spi->mode & SPI_CS_HIGH));
 		}
 	}
-	if (!status)
+	if (!status) {
 		status = spi_bitbang_setup(spi);
+		/* in case it was initialized from static board data */
+		spi_gpio->cs_gpios[spi->chip_select] = cs;
+	}
+
 	if (status) {
 		if (!spi->controller_state && cs != SPI_GPIO_NO_CHIPSELECT)
 			gpio_free(cs);
@@ -250,7 +279,8 @@ static int spi_gpio_setup(struct spi_device *spi)
 
 static void spi_gpio_cleanup(struct spi_device *spi)
 {
-	unsigned long	cs = (unsigned long) spi->controller_data;
+	struct spi_gpio *spi_gpio = spi_to_spi_gpio(spi);
+	unsigned int cs = spi_gpio->cs_gpios[spi->chip_select];
 
 	if (cs != SPI_GPIO_NO_CHIPSELECT)
 		gpio_free(cs);
@@ -313,6 +343,55 @@ spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label,
 	return value;
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id spi_gpio_dt_ids[] = {
+	{ .compatible = "spi-gpio" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, spi_gpio_dt_ids);
+
+static int spi_gpio_probe_dt(struct platform_device *pdev)
+{
+	int ret;
+	u32 tmp;
+	struct spi_gpio_platform_data	*pdata;
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *of_id =
+			of_match_device(spi_gpio_dt_ids, &pdev->dev);
+
+	if (!of_id)
+		return 0;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->sck = of_get_named_gpio(np, "gpio-sck", 0);
+	pdata->miso = of_get_named_gpio(np, "gpio-miso", 0);
+	pdata->mosi = of_get_named_gpio(np, "gpio-mosi", 0);
+
+	ret = of_property_read_u32(np, "num-chipselects", &tmp);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "num-chipselects property not found\n");
+		goto error_free;
+	}
+
+	pdata->num_chipselect = tmp;
+	pdev->dev.platform_data = pdata;
+
+	return 1;
+
+error_free:
+	devm_kfree(&pdev->dev, pdata);
+	return ret;
+}
+#else
+static inline int spi_gpio_probe_dt(struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
 static int __devinit spi_gpio_probe(struct platform_device *pdev)
 {
 	int				status;
@@ -320,6 +399,13 @@ static int __devinit spi_gpio_probe(struct platform_device *pdev)
 	struct spi_gpio			*spi_gpio;
 	struct spi_gpio_platform_data	*pdata;
 	u16 master_flags = 0;
+	bool use_of = 0;
+
+	status = spi_gpio_probe_dt(pdev);
+	if (status < 0)
+		return status;
+	if (status > 0)
+		use_of = 1;
 
 	pdata = pdev->dev.platform_data;
 #ifdef GENERIC_BITBANG
@@ -331,7 +417,8 @@ static int __devinit spi_gpio_probe(struct platform_device *pdev)
 	if (status < 0)
 		return status;
 
-	master = spi_alloc_master(&pdev->dev, sizeof *spi_gpio);
+	master = spi_alloc_master(&pdev->dev, sizeof(*spi_gpio) +
+					(sizeof(int) * SPI_N_CHIPSEL));
 	if (!master) {
 		status = -ENOMEM;
 		goto gpio_free;
@@ -348,6 +435,23 @@ static int __devinit spi_gpio_probe(struct platform_device *pdev)
 	master->num_chipselect = SPI_N_CHIPSEL;
 	master->setup = spi_gpio_setup;
 	master->cleanup = spi_gpio_cleanup;
+#ifdef CONFIG_OF
+	master->dev.of_node = pdev->dev.of_node;
+
+	if (use_of) {
+		int i;
+		struct device_node *np = pdev->dev.of_node;
+
+		/*
+		 * In DT environments, take the CS GPIO from the "cs-gpios"
+		 * property of the node.
+		 */
+
+		for (i = 0; i < SPI_N_CHIPSEL; i++)
+			spi_gpio->cs_gpios[i] =
+				of_get_named_gpio(np, "cs-gpios", i);
+	}
+#endif
 
 	spi_gpio->bitbang.master = spi_master_get(master);
 	spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
@@ -408,8 +512,11 @@ static int __devexit spi_gpio_remove(struct platform_device *pdev)
 MODULE_ALIAS("platform:" DRIVER_NAME);
 
 static struct platform_driver spi_gpio_driver = {
-	.driver.name	= DRIVER_NAME,
-	.driver.owner	= THIS_MODULE,
+	.driver = {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(spi_gpio_dt_ids),
+	},
 	.probe		= spi_gpio_probe,
 	.remove		= __devexit_p(spi_gpio_remove),
 };

drivers/spi/spi-imx.c

@@ -197,6 +197,7 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin,
 #define MX51_ECSPI_CONFIG_SCLKPOL(cs)	(1 << ((cs) +  4))
 #define MX51_ECSPI_CONFIG_SBBCTRL(cs)	(1 << ((cs) +  8))
 #define MX51_ECSPI_CONFIG_SSBPOL(cs)	(1 << ((cs) + 12))
+#define MX51_ECSPI_CONFIG_SCLKCTL(cs)	(1 << ((cs) + 20))
 
 #define MX51_ECSPI_INT		0x10
 #define MX51_ECSPI_INT_TEEN		(1 <<  0)
@@ -287,9 +288,10 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 	if (config->mode & SPI_CPHA)
 		cfg |= MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
 
-	if (config->mode & SPI_CPOL)
+	if (config->mode & SPI_CPOL) {
 		cfg |= MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
-
+		cfg |= MX51_ECSPI_CONFIG_SCLKCTL(config->cs);
+	}
 	if (config->mode & SPI_CS_HIGH)
 		cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs);
 

drivers/spi/spi-mpc512x-psc.c

@@ -494,7 +494,7 @@ static int __devinit mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr,
 
 static int __devexit mpc512x_psc_spi_do_remove(struct device *dev)
 {
-	struct spi_master *master = dev_get_drvdata(dev);
+	struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
 
 	flush_workqueue(mps->workqueue);
@@ -503,6 +503,7 @@ static int __devexit mpc512x_psc_spi_do_remove(struct device *dev)
 	free_irq(mps->irq, mps);
 	if (mps->psc)
 		iounmap(mps->psc);
+	spi_master_put(master);
 
 	return 0;
 }

drivers/spi/spi-mpc52xx-psc.c

@@ -481,7 +481,7 @@ static int __devinit mpc52xx_psc_spi_of_probe(struct platform_device *op)
 
 static int __devexit mpc52xx_psc_spi_of_remove(struct platform_device *op)
 {
-	struct spi_master *master = dev_get_drvdata(&op->dev);
+	struct spi_master *master = spi_master_get(dev_get_drvdata(&op->dev));
 	struct mpc52xx_psc_spi *mps = spi_master_get_devdata(master);
 
 	flush_workqueue(mps->workqueue);
@@ -490,6 +490,7 @@ static int __devexit mpc52xx_psc_spi_of_remove(struct platform_device *op)
 	free_irq(mps->irq, mps);
 	if (mps->psc)
 		iounmap(mps->psc);
+	spi_master_put(master);
 
 	return 0;
 }

drivers/spi/spi-mpc52xx.c

@@ -454,7 +454,7 @@ static int __devinit mpc52xx_spi_probe(struct platform_device *op)
 				GFP_KERNEL);
 		if (!ms->gpio_cs) {
 			rc = -ENOMEM;
-			goto err_alloc;
+			goto err_alloc_gpio;
 		}
 
 		for (i = 0; i < ms->gpio_cs_count; i++) {
@@ -514,12 +514,13 @@ static int __devinit mpc52xx_spi_probe(struct platform_device *op)
 
  err_register:
 	dev_err(&ms->master->dev, "initialization failed\n");
-	spi_master_put(master);
  err_gpio:
 	while (i-- > 0)
 		gpio_free(ms->gpio_cs[i]);
 
 	kfree(ms->gpio_cs);
+ err_alloc_gpio:
+	spi_master_put(master);
  err_alloc:
  err_init:
 	iounmap(regs);
@@ -528,7 +529,7 @@ static int __devinit mpc52xx_spi_probe(struct platform_device *op)
 
 static int __devexit mpc52xx_spi_remove(struct platform_device *op)
 {
-	struct spi_master *master = dev_get_drvdata(&op->dev);
+	struct spi_master *master = spi_master_get(dev_get_drvdata(&op->dev));
 	struct mpc52xx_spi *ms = spi_master_get_devdata(master);
 	int i;
 
@@ -540,8 +541,8 @@ static int __devexit mpc52xx_spi_remove(struct platform_device *op)
 
 	kfree(ms->gpio_cs);
 	spi_unregister_master(master);
-	spi_master_put(master);
 	iounmap(ms->regs);
+	spi_master_put(master);
 
 	return 0;
 }

drivers/spi/spi-orion.c

@@ -36,12 +36,6 @@
 #define ORION_SPI_CLK_PRESCALE_MASK	0x1F
 
 struct orion_spi {
-	struct work_struct	work;
-
-	/* Lock access to transfer list.	*/
-	spinlock_t		lock;
-
-	struct list_head	msg_queue;
 	struct spi_master	*master;
 	void __iomem		*base;
 	unsigned int		max_speed;
@@ -49,8 +43,6 @@ struct orion_spi {
 	struct clk              *clk;
 };
 
-static struct workqueue_struct *orion_spi_wq;
-
 static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg)
 {
 	return orion_spi->base + reg;
@@ -277,73 +269,78 @@ orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
 }
 
 
-static void orion_spi_work(struct work_struct *work)
+static int orion_spi_transfer_one_message(struct spi_master *master,
+					   struct spi_message *m)
 {
-	struct orion_spi *orion_spi =
-		container_of(work, struct orion_spi, work);
-
-	spin_lock_irq(&orion_spi->lock);
-	while (!list_empty(&orion_spi->msg_queue)) {
-		struct spi_message *m;
-		struct spi_device *spi;
-		struct spi_transfer *t = NULL;
-		int par_override = 0;
-		int status = 0;
-		int cs_active = 0;
-
-		m = container_of(orion_spi->msg_queue.next, struct spi_message,
-				 queue);
+	struct orion_spi *orion_spi = spi_master_get_devdata(master);
+	struct spi_device *spi = m->spi;
+	struct spi_transfer *t = NULL;
+	int par_override = 0;
+	int status = 0;
+	int cs_active = 0;
 
-		list_del_init(&m->queue);
-		spin_unlock_irq(&orion_spi->lock);
+	/* Load defaults */
+	status = orion_spi_setup_transfer(spi, NULL);
 
-		spi = m->spi;
+	if (status < 0)
+		goto msg_done;
 
-		/* Load defaults */
-		status = orion_spi_setup_transfer(spi, NULL);
+	list_for_each_entry(t, &m->transfers, transfer_list) {
+		/* make sure buffer length is even when working in 16
+		 * bit mode*/
+		if ((t->bits_per_word == 16) && (t->len & 1)) {
+			dev_err(&spi->dev,
+				"message rejected : "
+				"odd data length %d while in 16 bit mode\n",
+				t->len);
+			status = -EIO;
+			goto msg_done;
+		}
 
-		if (status < 0)
+		if (t->speed_hz && t->speed_hz < orion_spi->min_speed) {
+			dev_err(&spi->dev,
+				"message rejected : "
+				"device min speed (%d Hz) exceeds "
+				"required transfer speed (%d Hz)\n",
+				orion_spi->min_speed, t->speed_hz);
+			status = -EIO;
 			goto msg_done;
+		}
 
-		list_for_each_entry(t, &m->transfers, transfer_list) {
-			if (par_override || t->speed_hz || t->bits_per_word) {
-				par_override = 1;
-				status = orion_spi_setup_transfer(spi, t);
-				if (status < 0)
-					break;
-				if (!t->speed_hz && !t->bits_per_word)
-					par_override = 0;
-			}
-
-			if (!cs_active) {
-				orion_spi_set_cs(orion_spi, 1);
-				cs_active = 1;
-			}
-
-			if (t->len)
-				m->actual_length +=
-					orion_spi_write_read(spi, t);
-
-			if (t->delay_usecs)
-				udelay(t->delay_usecs);
-
-			if (t->cs_change) {
-				orion_spi_set_cs(orion_spi, 0);
-				cs_active = 0;
-			}
+		if (par_override || t->speed_hz || t->bits_per_word) {
+			par_override = 1;
+			status = orion_spi_setup_transfer(spi, t);
+			if (status < 0)
+				break;
+			if (!t->speed_hz && !t->bits_per_word)
+				par_override = 0;
 		}
 
-msg_done:
-		if (cs_active)
-			orion_spi_set_cs(orion_spi, 0);
+		if (!cs_active) {
+			orion_spi_set_cs(orion_spi, 1);
+			cs_active = 1;
+		}
 
-		m->status = status;
-		m->complete(m->context);
+		if (t->len)
+			m->actual_length += orion_spi_write_read(spi, t);
 
-		spin_lock_irq(&orion_spi->lock);
+		if (t->delay_usecs)
+			udelay(t->delay_usecs);
+
+		if (t->cs_change) {
+			orion_spi_set_cs(orion_spi, 0);
+			cs_active = 0;
+		}
 	}
 
-	spin_unlock_irq(&orion_spi->lock);
+msg_done:
+	if (cs_active)
+		orion_spi_set_cs(orion_spi, 0);
+
+	m->status = status;
+	spi_finalize_current_message(master);
+
+	return 0;
 }
 
 static int __init orion_spi_reset(struct orion_spi *orion_spi)
@@ -376,75 +373,6 @@ static int orion_spi_setup(struct spi_device *spi)
 	return 0;
 }
 
-static int orion_spi_transfer(struct spi_device *spi, struct spi_message *m)
-{
-	struct orion_spi *orion_spi;
-	struct spi_transfer *t = NULL;
-	unsigned long flags;
-
-	m->actual_length = 0;
-	m->status = 0;
-
-	/* reject invalid messages and transfers */
-	if (list_empty(&m->transfers) || !m->complete)
-		return -EINVAL;
-
-	orion_spi = spi_master_get_devdata(spi->master);
-
-	list_for_each_entry(t, &m->transfers, transfer_list) {
-		unsigned int bits_per_word = spi->bits_per_word;
-
-		if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
-			dev_err(&spi->dev,
-				"message rejected : "
-				"invalid transfer data buffers\n");
-			goto msg_rejected;
-		}
-
-		if (t->bits_per_word)
-			bits_per_word = t->bits_per_word;
-
-		if ((bits_per_word != 8) && (bits_per_word != 16)) {
-			dev_err(&spi->dev,
-				"message rejected : "
-				"invalid transfer bits_per_word (%d bits)\n",
-				bits_per_word);
-			goto msg_rejected;
-		}
-		/*make sure buffer length is even when working in 16 bit mode*/
-		if ((t->bits_per_word == 16) && (t->len & 1)) {
-			dev_err(&spi->dev,
-				"message rejected : "
-				"odd data length (%d) while in 16 bit mode\n",
-				t->len);
-			goto msg_rejected;
-		}
-
-		if (t->speed_hz && t->speed_hz < orion_spi->min_speed) {
-			dev_err(&spi->dev,
-				"message rejected : "
-				"device min speed (%d Hz) exceeds "
-				"required transfer speed (%d Hz)\n",
-				orion_spi->min_speed, t->speed_hz);
-			goto msg_rejected;
-		}
-	}
-
-
-	spin_lock_irqsave(&orion_spi->lock, flags);
-	list_add_tail(&m->queue, &orion_spi->msg_queue);
-	queue_work(orion_spi_wq, &orion_spi->work);
-	spin_unlock_irqrestore(&orion_spi->lock, flags);
-
-	return 0;
-msg_rejected:
-	/* Message rejected and not queued */
-	m->status = -EINVAL;
-	if (m->complete)
-		m->complete(m->context);
-	return -EINVAL;
-}
-
 static int __init orion_spi_probe(struct platform_device *pdev)
 {
 	struct spi_master *master;
@@ -474,7 +402,7 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 	master->mode_bits = 0;
 
 	master->setup = orion_spi_setup;
-	master->transfer = orion_spi_transfer;
+	master->transfer_one_message = orion_spi_transfer_one_message;
 	master->num_chipselect = ORION_NUM_CHIPSELECTS;
 
 	dev_set_drvdata(&pdev->dev, master);
@@ -507,11 +435,6 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 	}
 	spi->base = ioremap(r->start, SZ_1K);
 
-	INIT_WORK(&spi->work, orion_spi_work);
-
-	spin_lock_init(&spi->lock);
-	INIT_LIST_HEAD(&spi->msg_queue);
-
 	if (orion_spi_reset(spi) < 0)
 		goto out_rel_mem;
 
@@ -536,14 +459,12 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 static int __exit orion_spi_remove(struct platform_device *pdev)
 {
 	struct spi_master *master;
-	struct orion_spi *spi;
 	struct resource *r;
+	struct orion_spi *spi;
 
 	master = dev_get_drvdata(&pdev->dev);
 	spi = spi_master_get_devdata(master);
 
-	cancel_work_sync(&spi->work);
-
 	clk_disable_unprepare(spi->clk);
 	clk_put(spi->clk);
 
@@ -574,21 +495,13 @@ static struct platform_driver orion_spi_driver = {
 
 static int __init orion_spi_init(void)
 {
-	orion_spi_wq = create_singlethread_workqueue(
-				orion_spi_driver.driver.name);
-	if (orion_spi_wq == NULL)
-		return -ENOMEM;
-
 	return platform_driver_probe(&orion_spi_driver, orion_spi_probe);
 }
 module_init(orion_spi_init);
 
 static void __exit orion_spi_exit(void)
 {
-	flush_workqueue(orion_spi_wq);
 	platform_driver_unregister(&orion_spi_driver);
-
-	destroy_workqueue(orion_spi_wq);
 }
 module_exit(orion_spi_exit);
 

drivers/spi/spi-s3c24xx.c

@@ -611,6 +611,7 @@ static int __devinit s3c24xx_spi_probe(struct platform_device *pdev)
 	if (!pdata->set_cs) {
 		if (pdata->pin_cs < 0) {
 			dev_err(&pdev->dev, "No chipselect pin\n");
+			err = -EINVAL;
 			goto err_register;
 		}
 

drivers/spi/spi-s3c64xx.c

@@ -976,7 +976,8 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
 	spi_set_ctldata(spi, NULL);
 
 err_gpio_req:
-	kfree(cs);
+	if (spi->dev.of_node)
+		kfree(cs);
 
 	return err;
 }
@@ -1409,7 +1410,7 @@ static int s3c64xx_spi_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int s3c64xx_spi_suspend(struct device *dev)
 {
-	struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
+	struct spi_master *master = dev_get_drvdata(dev);
 	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
 
 	spi_master_suspend(master);
@@ -1428,7 +1429,7 @@ static int s3c64xx_spi_suspend(struct device *dev)
 
 static int s3c64xx_spi_resume(struct device *dev)
 {
-	struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
+	struct spi_master *master = dev_get_drvdata(dev);
 	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
 	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 
@@ -1452,7 +1453,7 @@ static int s3c64xx_spi_resume(struct device *dev)
 #ifdef CONFIG_PM_RUNTIME
 static int s3c64xx_spi_runtime_suspend(struct device *dev)
 {
-	struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
+	struct spi_master *master = dev_get_drvdata(dev);
 	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
 
 	clk_disable(sdd->clk);
@@ -1463,7 +1464,7 @@ static int s3c64xx_spi_runtime_suspend(struct device *dev)
 
 static int s3c64xx_spi_runtime_resume(struct device *dev)
 {
-	struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
+	struct spi_master *master = dev_get_drvdata(dev);
 	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
 
 	clk_enable(sdd->src_clk);

drivers/spi/spi-sc18is602.c

+/*
+ * NXP SC18IS602/603 SPI driver
+ *
+ * Copyright (C) Guenter Roeck <linux@roeck-us.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/platform_data/sc18is602.h>
+
+enum chips { sc18is602, sc18is602b, sc18is603 };
+
+#define SC18IS602_BUFSIZ		200
+#define SC18IS602_CLOCK			7372000
+
+#define SC18IS602_MODE_CPHA		BIT(2)
+#define SC18IS602_MODE_CPOL		BIT(3)
+#define SC18IS602_MODE_LSB_FIRST	BIT(5)
+#define SC18IS602_MODE_CLOCK_DIV_4	0x0
+#define SC18IS602_MODE_CLOCK_DIV_16	0x1
+#define SC18IS602_MODE_CLOCK_DIV_64	0x2
+#define SC18IS602_MODE_CLOCK_DIV_128	0x3
+
+struct sc18is602 {
+	struct spi_master	*master;
+	struct device		*dev;
+	u8			ctrl;
+	u32			freq;
+	u32			speed;
+
+	/* I2C data */
+	struct i2c_client	*client;
+	enum chips		id;
+	u8			buffer[SC18IS602_BUFSIZ + 1];
+	int			tlen;	/* Data queued for tx in buffer */
+	int			rindex;	/* Receive data index in buffer */
+};
+
+static int sc18is602_wait_ready(struct sc18is602 *hw, int len)
+{
+	int i, err;
+	int usecs = 1000000 * len / hw->speed + 1;
+	u8 dummy[1];
+
+	for (i = 0; i < 10; i++) {
+		err = i2c_master_recv(hw->client, dummy, 1);
+		if (err >= 0)
+			return 0;
+		usleep_range(usecs, usecs * 2);
+	}
+	return -ETIMEDOUT;
+}
+
+static int sc18is602_txrx(struct sc18is602 *hw, struct spi_message *msg,
+			  struct spi_transfer *t, bool do_transfer)
+{
+	unsigned int len = t->len;
+	int ret;
+
+	if (hw->tlen == 0) {
+		/* First byte (I2C command) is chip select */
+		hw->buffer[0] = 1 << msg->spi->chip_select;
+		hw->tlen = 1;
+		hw->rindex = 0;
+	}
+	/*
+	 * We can not immediately send data to the chip, since each I2C message
+	 * resembles a full SPI message (from CS active to CS inactive).
+	 * Enqueue messages up to the first read or until do_transfer is true.
+	 */
+	if (t->tx_buf) {
+		memcpy(&hw->buffer[hw->tlen], t->tx_buf, len);
+		hw->tlen += len;
+		if (t->rx_buf)
+			do_transfer = true;
+		else
+			hw->rindex = hw->tlen - 1;
+	} else if (t->rx_buf) {
+		/*
+		 * For receive-only transfers we still need to perform a dummy
+		 * write to receive data from the SPI chip.
+		 * Read data starts at the end of transmit data (minus 1 to
+		 * account for CS).
+		 */
+		hw->rindex = hw->tlen - 1;
+		memset(&hw->buffer[hw->tlen], 0, len);
+		hw->tlen += len;
+		do_transfer = true;
+	}
+
+	if (do_transfer && hw->tlen > 1) {
+		ret = sc18is602_wait_ready(hw, SC18IS602_BUFSIZ);
+		if (ret < 0)
+			return ret;
+		ret = i2c_master_send(hw->client, hw->buffer, hw->tlen);
+		if (ret < 0)
+			return ret;
+		if (ret != hw->tlen)
+			return -EIO;
+
+		if (t->rx_buf) {
+			int rlen = hw->rindex + len;
+
+			ret = sc18is602_wait_ready(hw, hw->tlen);
+			if (ret < 0)
+				return ret;
+			ret = i2c_master_recv(hw->client, hw->buffer, rlen);
+			if (ret < 0)
+				return ret;
+			if (ret != rlen)
+				return -EIO;
+			memcpy(t->rx_buf, &hw->buffer[hw->rindex], len);
+		}
+		hw->tlen = 0;
+	}
+	return len;
+}
+
+static int sc18is602_setup_transfer(struct sc18is602 *hw, u32 hz, u8 mode)
+{
+	u8 ctrl = 0;
+	int ret;
+
+	if (mode & SPI_CPHA)
+		ctrl |= SC18IS602_MODE_CPHA;
+	if (mode & SPI_CPOL)
+		ctrl |= SC18IS602_MODE_CPOL;
+	if (mode & SPI_LSB_FIRST)
+		ctrl |= SC18IS602_MODE_LSB_FIRST;
+
+	/* Find the closest clock speed */
+	if (hz >= hw->freq / 4) {
+		ctrl |= SC18IS602_MODE_CLOCK_DIV_4;
+		hw->speed = hw->freq / 4;
+	} else if (hz >= hw->freq / 16) {
+		ctrl |= SC18IS602_MODE_CLOCK_DIV_16;
+		hw->speed = hw->freq / 16;
+	} else if (hz >= hw->freq / 64) {
+		ctrl |= SC18IS602_MODE_CLOCK_DIV_64;
+		hw->speed = hw->freq / 64;
+	} else {
+		ctrl |= SC18IS602_MODE_CLOCK_DIV_128;
+		hw->speed = hw->freq / 128;
+	}
+
+	/*
+	 * Don't do anything if the control value did not change. The initial
+	 * value of 0xff for hw->ctrl ensures that the correct mode will be set
+	 * with the first call to this function.
+	 */
+	if (ctrl == hw->ctrl)
+		return 0;
+
+	ret = i2c_smbus_write_byte_data(hw->client, 0xf0, ctrl);
+	if (ret < 0)
+		return ret;
+
+	hw->ctrl = ctrl;
+
+	return 0;
+}
+
+static int sc18is602_check_transfer(struct spi_device *spi,
+				    struct spi_transfer *t, int tlen)
+{
+	int bpw;
+	uint32_t hz;
+
+	if (t && t->len + tlen > SC18IS602_BUFSIZ)
+		return -EINVAL;
+
+	bpw = spi->bits_per_word;
+	if (t && t->bits_per_word)
+		bpw = t->bits_per_word;
+	if (bpw != 8)
+		return -EINVAL;
+
+	hz = spi->max_speed_hz;
+	if (t && t->speed_hz)
+		hz = t->speed_hz;
+	if (hz == 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int sc18is602_transfer_one(struct spi_master *master,
+				  struct spi_message *m)
+{
+	struct sc18is602 *hw = spi_master_get_devdata(master);
+	struct spi_device *spi = m->spi;
+	struct spi_transfer *t;
+	int status = 0;
+
+	/* SC18IS602 does not support CS2 */
+	if (hw->id == sc18is602 && spi->chip_select == 2) {
+		status = -ENXIO;
+		goto error;
+	}
+
+	hw->tlen = 0;
+	list_for_each_entry(t, &m->transfers, transfer_list) {
+		u32 hz = t->speed_hz ? : spi->max_speed_hz;
+		bool do_transfer;
+
+		status = sc18is602_check_transfer(spi, t, hw->tlen);
+		if (status < 0)
+			break;
+
+		status = sc18is602_setup_transfer(hw, hz, spi->mode);
+		if (status < 0)
+			break;
+
+		do_transfer = t->cs_change || list_is_last(&t->transfer_list,
+							   &m->transfers);
+
+		if (t->len) {
+			status = sc18is602_txrx(hw, m, t, do_transfer);
+			if (status < 0)
+				break;
+			m->actual_length += status;
+		}
+		status = 0;
+
+		if (t->delay_usecs)
+			udelay(t->delay_usecs);
+	}
+error:
+	m->status = status;
+	spi_finalize_current_message(master);
+
+	return status;
+}
+
+static int sc18is602_setup(struct spi_device *spi)
+{
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 8;
+
+	if (spi->mode & ~(SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST))
+		return -EINVAL;
+
+	return sc18is602_check_transfer(spi, NULL, 0);
+}
+
+static int sc18is602_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
+	struct sc18is602_platform_data *pdata = dev_get_platdata(dev);
+	struct sc18is602 *hw;
+	struct spi_master *master;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
+				     I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+		return -EINVAL;
+
+	master = spi_alloc_master(dev, sizeof(struct sc18is602));
+	if (!master)
+		return -ENOMEM;
+
+	hw = spi_master_get_devdata(master);
+	i2c_set_clientdata(client, hw);
+
+	hw->master = master;
+	hw->client = client;
+	hw->dev = dev;
+	hw->ctrl = 0xff;
+
+	hw->id = id->driver_data;
+
+	switch (hw->id) {
+	case sc18is602:
+	case sc18is602b:
+		master->num_chipselect = 4;
+		hw->freq = SC18IS602_CLOCK;
+		break;
+	case sc18is603:
+		master->num_chipselect = 2;
+		if (pdata) {
+			hw->freq = pdata->clock_frequency;
+		} else {
+			const __be32 *val;
+			int len;
+
+			val = of_get_property(np, "clock-frequency", &len);
+			if (val && len >= sizeof(__be32))
+				hw->freq = be32_to_cpup(val);
+		}
+		if (!hw->freq)
+			hw->freq = SC18IS602_CLOCK;
+		break;
+	}
+	master->bus_num = client->adapter->nr;
+	master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST;
+	master->setup = sc18is602_setup;
+	master->transfer_one_message = sc18is602_transfer_one;
+	master->dev.of_node = np;
+
+	error = spi_register_master(master);
+	if (error)
+		goto error_reg;
+
+	return 0;
+
+error_reg:
+	spi_master_put(master);
+	return error;
+}
+
+static int sc18is602_remove(struct i2c_client *client)
+{
+	struct sc18is602 *hw = i2c_get_clientdata(client);
+	struct spi_master *master = hw->master;
+
+	spi_unregister_master(master);
+
+	return 0;
+}
+
+static const struct i2c_device_id sc18is602_id[] = {
+	{ "sc18is602", sc18is602 },
+	{ "sc18is602b", sc18is602b },
+	{ "sc18is603", sc18is603 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sc18is602_id);
+
+static struct i2c_driver sc18is602_driver = {
+	.driver = {
+		.name = "sc18is602",
+	},
+	.probe = sc18is602_probe,
+	.remove = sc18is602_remove,
+	.id_table = sc18is602_id,
+};
+
+module_i2c_driver(sc18is602_driver);
+
+MODULE_DESCRIPTION("SC18IC602/603 SPI Master Driver");
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_LICENSE("GPL");

drivers/spi/spi-sh-hspi.c

@@ -283,7 +283,7 @@ static int __devinit hspi_probe(struct platform_device *pdev)
 	ret = spi_register_master(master);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "spi_register_master error.\n");
-		goto error2;
+		goto error1;
 	}
 
 	pm_runtime_enable(&pdev->dev);
@@ -292,8 +292,6 @@ static int __devinit hspi_probe(struct platform_device *pdev)
 
 	return 0;
 
- error2:
-	devm_iounmap(hspi->dev, hspi->addr);
  error1:
 	clk_put(clk);
  error0:
@@ -310,7 +308,6 @@ static int __devexit hspi_remove(struct platform_device *pdev)
 
 	clk_put(hspi->clk);
 	spi_unregister_master(hspi->master);
-	devm_iounmap(hspi->dev, hspi->addr);
 
 	return 0;
 }

drivers/spi/spi-stmp.c

@@ -594,9 +594,7 @@ static int __devexit stmp_spi_remove(struct platform_device *dev)
 	struct stmp_spi *ss;
 	struct spi_master *master;
 
-	master = platform_get_drvdata(dev);
-	if (master == NULL)
-		goto out0;
+	master = spi_master_get(platform_get_drvdata(dev));
 	ss = spi_master_get_devdata(master);
 
 	spi_unregister_master(master);
@@ -609,8 +607,6 @@ static int __devexit stmp_spi_remove(struct platform_device *dev)
 	destroy_workqueue(ss->workqueue);
 	iounmap(ss->regs);
 	spi_master_put(master);
-	platform_set_drvdata(dev, NULL);
-out0:
 	return 0;
 }
 

drivers/spi/spi-tle62x0.c

@@ -316,18 +316,7 @@ static struct spi_driver tle62x0_driver = {
 	.remove		= __devexit_p(tle62x0_remove),
 };
 
-static __init int tle62x0_init(void)
-{
-	return spi_register_driver(&tle62x0_driver);
-}
-
-static __exit void tle62x0_exit(void)
-{
-	spi_unregister_driver(&tle62x0_driver);
-}
-
-module_init(tle62x0_init);
-module_exit(tle62x0_exit);
+module_spi_driver(tle62x0_driver);
 
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
 MODULE_DESCRIPTION("TLE62x0 SPI driver");

drivers/spi/spi-topcliff-pch.c

@@ -1536,8 +1536,6 @@ static int __devexit pch_spi_pd_remove(struct platform_device *plat_dev)
 
 	pci_iounmap(board_dat->pdev, data->io_remap_addr);
 	spi_unregister_master(data->master);
-	spi_master_put(data->master);
-	platform_set_drvdata(plat_dev, NULL);
 
 	return 0;
 }

include/linux/amba/pl022.h

@@ -244,6 +244,7 @@ struct dma_chan;
  *     indicates no delay and the device will be suspended immediately.
  * @rt: indicates the controller should run the message pump with realtime
  *     priority to minimise the transfer latency on the bus.
+ * @chipselects: list of <num_chipselects> chip select gpios
  */
 struct pl022_ssp_controller {
 	u16 bus_id;
@@ -254,6 +255,7 @@ struct pl022_ssp_controller {
 	void *dma_tx_param;
 	int autosuspend_delay;
 	bool rt;
+	int *chipselects;
 };
 
 /**

include/linux/platform_data/sc18is602.h

+/*
+ * Platform data for NXP SC18IS602/603
+ *
+ * Copyright (C) 2012 Guenter Roeck <linux@roeck-us.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * For further information, see the Documentation/spi/sc18is602 file.
+ */
+
+/**
+ * struct sc18is602_platform_data - sc18is602 info
+ * @clock_frequency		SC18IS603 oscillator frequency
+ */
+struct sc18is602_platform_data {
+	u32 clock_frequency;
+};

include/linux/spi/mxs-spi.h

+/*
+ * include/linux/spi/mxs-spi.h
+ *
+ * Freescale i.MX233/i.MX28 SPI controller register definition
+ *
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __LINUX_SPI_MXS_SPI_H__
+#define __LINUX_SPI_MXS_SPI_H__
+
+#include <linux/fsl/mxs-dma.h>
+
+#define ssp_is_old(host)	((host)->devid == IMX23_SSP)
+
+/* SSP registers */
+#define HW_SSP_CTRL0				0x000
+#define  BM_SSP_CTRL0_RUN			(1 << 29)
+#define  BM_SSP_CTRL0_SDIO_IRQ_CHECK		(1 << 28)
+#define  BM_SSP_CTRL0_LOCK_CS			(1 << 27)
+#define  BM_SSP_CTRL0_IGNORE_CRC		(1 << 26)
+#define  BM_SSP_CTRL0_READ			(1 << 25)
+#define  BM_SSP_CTRL0_DATA_XFER			(1 << 24)
+#define  BP_SSP_CTRL0_BUS_WIDTH			22
+#define  BM_SSP_CTRL0_BUS_WIDTH			(0x3 << 22)
+#define  BM_SSP_CTRL0_WAIT_FOR_IRQ		(1 << 21)
+#define  BM_SSP_CTRL0_WAIT_FOR_CMD		(1 << 20)
+#define  BM_SSP_CTRL0_LONG_RESP			(1 << 19)
+#define  BM_SSP_CTRL0_GET_RESP			(1 << 17)
+#define  BM_SSP_CTRL0_ENABLE			(1 << 16)
+#define  BP_SSP_CTRL0_XFER_COUNT		0
+#define  BM_SSP_CTRL0_XFER_COUNT		0xffff
+#define HW_SSP_CMD0				0x010
+#define  BM_SSP_CMD0_DBL_DATA_RATE_EN		(1 << 25)
+#define  BM_SSP_CMD0_SLOW_CLKING_EN		(1 << 22)
+#define  BM_SSP_CMD0_CONT_CLKING_EN		(1 << 21)
+#define  BM_SSP_CMD0_APPEND_8CYC		(1 << 20)
+#define  BP_SSP_CMD0_BLOCK_SIZE			16
+#define  BM_SSP_CMD0_BLOCK_SIZE			(0xf << 16)
+#define  BP_SSP_CMD0_BLOCK_COUNT		8
+#define  BM_SSP_CMD0_BLOCK_COUNT		(0xff << 8)
+#define  BP_SSP_CMD0_CMD			0
+#define  BM_SSP_CMD0_CMD			0xff
+#define HW_SSP_CMD1				0x020
+#define HW_SSP_XFER_SIZE			0x030
+#define HW_SSP_BLOCK_SIZE			0x040
+#define  BP_SSP_BLOCK_SIZE_BLOCK_COUNT		4
+#define  BM_SSP_BLOCK_SIZE_BLOCK_COUNT		(0xffffff << 4)
+#define  BP_SSP_BLOCK_SIZE_BLOCK_SIZE		0
+#define  BM_SSP_BLOCK_SIZE_BLOCK_SIZE		0xf
+#define HW_SSP_TIMING(h)			(ssp_is_old(h) ? 0x050 : 0x070)
+#define  BP_SSP_TIMING_TIMEOUT			16
+#define  BM_SSP_TIMING_TIMEOUT			(0xffff << 16)
+#define  BP_SSP_TIMING_CLOCK_DIVIDE		8
+#define  BM_SSP_TIMING_CLOCK_DIVIDE		(0xff << 8)
+#define  BF_SSP_TIMING_CLOCK_DIVIDE(v)		\
+			(((v) << 8) & BM_SSP_TIMING_CLOCK_DIVIDE)
+#define  BP_SSP_TIMING_CLOCK_RATE		0
+#define  BM_SSP_TIMING_CLOCK_RATE		0xff
+#define BF_SSP_TIMING_CLOCK_RATE(v)		\
+			(((v) << 0) & BM_SSP_TIMING_CLOCK_RATE)
+#define HW_SSP_CTRL1(h)				(ssp_is_old(h) ? 0x060 : 0x080)
+#define  BM_SSP_CTRL1_SDIO_IRQ			(1 << 31)
+#define  BM_SSP_CTRL1_SDIO_IRQ_EN		(1 << 30)
+#define  BM_SSP_CTRL1_RESP_ERR_IRQ		(1 << 29)
+#define  BM_SSP_CTRL1_RESP_ERR_IRQ_EN		(1 << 28)
+#define  BM_SSP_CTRL1_RESP_TIMEOUT_IRQ		(1 << 27)
+#define  BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN	(1 << 26)
+#define  BM_SSP_CTRL1_DATA_TIMEOUT_IRQ		(1 << 25)
+#define  BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN	(1 << 24)
+#define  BM_SSP_CTRL1_DATA_CRC_IRQ		(1 << 23)
+#define  BM_SSP_CTRL1_DATA_CRC_IRQ_EN		(1 << 22)
+#define  BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ		(1 << 21)
+#define  BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN	(1 << 20)
+#define  BM_SSP_CTRL1_RECV_TIMEOUT_IRQ		(1 << 17)
+#define  BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN	(1 << 16)
+#define  BM_SSP_CTRL1_FIFO_OVERRUN_IRQ		(1 << 15)
+#define  BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN	(1 << 14)
+#define  BM_SSP_CTRL1_DMA_ENABLE		(1 << 13)
+#define  BM_SSP_CTRL1_PHASE			(1 << 10)
+#define  BM_SSP_CTRL1_POLARITY			(1 << 9)
+#define  BP_SSP_CTRL1_WORD_LENGTH		4
+#define  BM_SSP_CTRL1_WORD_LENGTH		(0xf << 4)
+#define  BF_SSP_CTRL1_WORD_LENGTH(v)		\
+			(((v) << 4) & BM_SSP_CTRL1_WORD_LENGTH)
+#define  BV_SSP_CTRL1_WORD_LENGTH__FOUR_BITS	0x3
+#define  BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS	0x7
+#define  BV_SSP_CTRL1_WORD_LENGTH__SIXTEEN_BITS	0xF
+#define  BP_SSP_CTRL1_SSP_MODE			0
+#define  BM_SSP_CTRL1_SSP_MODE			0xf
+#define  BF_SSP_CTRL1_SSP_MODE(v)		\
+			(((v) << 0) & BM_SSP_CTRL1_SSP_MODE)
+#define  BV_SSP_CTRL1_SSP_MODE__SPI		0x0
+#define  BV_SSP_CTRL1_SSP_MODE__SSI		0x1
+#define  BV_SSP_CTRL1_SSP_MODE__SD_MMC		0x3
+#define  BV_SSP_CTRL1_SSP_MODE__MS		0x4
+
+#define HW_SSP_DATA(h)				(ssp_is_old(h) ? 0x070 : 0x090)
+
+#define HW_SSP_SDRESP0(h)			(ssp_is_old(h) ? 0x080 : 0x0a0)
+#define HW_SSP_SDRESP1(h)			(ssp_is_old(h) ? 0x090 : 0x0b0)
+#define HW_SSP_SDRESP2(h)			(ssp_is_old(h) ? 0x0a0 : 0x0c0)
+#define HW_SSP_SDRESP3(h)			(ssp_is_old(h) ? 0x0b0 : 0x0d0)
+#define HW_SSP_STATUS(h)			(ssp_is_old(h) ? 0x0c0 : 0x100)
+#define  BM_SSP_STATUS_CARD_DETECT		(1 << 28)
+#define  BM_SSP_STATUS_SDIO_IRQ			(1 << 17)
+#define  BM_SSP_STATUS_FIFO_EMPTY		(1 << 5)
+
+#define BF_SSP(value, field)	(((value) << BP_SSP_##field) & BM_SSP_##field)
+
+#define SSP_PIO_NUM	3
+
+enum mxs_ssp_id {
+	IMX23_SSP,
+	IMX28_SSP,
+};
+
+struct mxs_ssp {
+	struct device			*dev;
+	void __iomem			*base;
+	struct clk			*clk;
+	unsigned int			clk_rate;
+	enum mxs_ssp_id			devid;
+
+	int				dma_channel;
+	struct dma_chan			*dmach;
+	struct mxs_dma_data		dma_data;
+	unsigned int			dma_dir;
+	enum dma_transfer_direction	slave_dirn;
+	u32				ssp_pio_words[SSP_PIO_NUM];
+};
+
+void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate);
+
+#endif	/* __LINUX_SPI_MXS_SPI_H__ */