mmc: mmci: Reverse IRQ handling for the arm_variant

commit 7878289b upstream.

Commit "mmc: mmci: Handle CMD irq before DATA irq", caused an issue
when using the ARM model of the PL181 and running QEMU.

The bug was reported for the following QEMU version:
$ qemu-system-arm -version
QEMU emulator version 2.0.0 (Debian 2.0.0+dfsg-2ubuntu1.1), Copyright
(c) 2003-2008 Fabrice Bellard

To resolve the problem, let's restore the old behavior were the DATA
irq is handled prior the CMD irq, but only for the arm_variant, which
the problem was reported for.
Reported-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[kees: backported to 3.16]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/mmc/host/mmci.c

@@ -65,6 +65,7 @@ static unsigned int fmax = 515633;
  * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock
  * @busy_detect: true if busy detection on dat0 is supported
  * @pwrreg_nopower: bits in MMCIPOWER don't controls ext. power supply
+ * @reversed_irq_handling: handle data irq before cmd irq.
  */
 struct variant_data {
 	unsigned int		clkreg;
@@ -80,6 +81,7 @@ struct variant_data {
 	bool			pwrreg_clkgate;
 	bool			busy_detect;
 	bool			pwrreg_nopower;
+	bool			reversed_irq_handling;
 };
 
 static struct variant_data variant_arm = {
@@ -87,6 +89,7 @@ static struct variant_data variant_arm = {
 	.fifohalfsize		= 8 * 4,
 	.datalength_bits	= 16,
 	.pwrreg_powerup		= MCI_PWR_UP,
+	.reversed_irq_handling	= true,
 };
 
 static struct variant_data variant_arm_extended_fifo = {
@@ -1163,8 +1166,13 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
 
 		dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status);
 
-		mmci_cmd_irq(host, host->cmd, status);
-		mmci_data_irq(host, host->data, status);
+		if (host->variant->reversed_irq_handling) {
+			mmci_data_irq(host, host->data, status);
+			mmci_cmd_irq(host, host->cmd, status);
+		} else {
+			mmci_cmd_irq(host, host->cmd, status);
+			mmci_data_irq(host, host->data, status);
+		}
 
 		/* Don't poll for busy completion in irq context. */
 		if (host->busy_status)