gpio: pcf857x: use client->irq for gpio_to_irq()

6e20a0a4
(gpio: pcf857x: enable gpio_to_irq() support)
added gpio_to_irq() support on pcf857x driver,
but it used pdata->irq.
This patch modifies driver to use client->irq instead of it.
It modifies kzm9g board platform settings,
and device probe information too.
This patch is tested on kzm9g board
Reported-by: Christian Engelmayer <christian.engelmayer@frequentis.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/mach-shmobile/board-kzm9g.c

@@ -548,7 +548,6 @@ static struct platform_device fsi_ak4648_device = {
 /* I2C */
 static struct pcf857x_platform_data pcf8575_pdata = {
 	.gpio_base	= GPIO_PCF8575_BASE,
-	.irq		= intcs_evt2irq(0x3260), /* IRQ19 */
 };
 
 static struct i2c_board_info i2c0_devices[] = {
@@ -570,6 +569,7 @@ static struct i2c_board_info i2c1_devices[] = {
 static struct i2c_board_info i2c3_devices[] = {
 	{
 		I2C_BOARD_INFO("pcf8575", 0x20),
+		.irq		= intcs_evt2irq(0x3260), /* IRQ19 */
 		.platform_data = &pcf8575_pdata,
 	},
 };

drivers/gpio/gpio-pcf857x.c

@@ -223,11 +223,11 @@ static void pcf857x_irq_domain_cleanup(struct pcf857x *gpio)
 
 static int pcf857x_irq_domain_init(struct pcf857x *gpio,
 				   struct pcf857x_platform_data *pdata,
-				   struct device *dev)
+				   struct i2c_client *client)
 {
 	int status;
 
-	gpio->irq_domain = irq_domain_add_linear(dev->of_node,
+	gpio->irq_domain = irq_domain_add_linear(client->dev.of_node,
 						 gpio->chip.ngpio,
 						 &pcf857x_irq_domain_ops,
 						 NULL);
@@ -235,15 +235,15 @@ static int pcf857x_irq_domain_init(struct pcf857x *gpio,
 		goto fail;
 
 	/* enable real irq */
-	status = request_irq(pdata->irq, pcf857x_irq_demux, 0,
-			     dev_name(dev), gpio);
+	status = request_irq(client->irq, pcf857x_irq_demux, 0,
+			     dev_name(&client->dev), gpio);
 	if (status)
 		goto fail;
 
 	/* enable gpio_to_irq() */
 	INIT_WORK(&gpio->work, pcf857x_irq_demux_work);
 	gpio->chip.to_irq	= pcf857x_to_irq;
-	gpio->irq		= pdata->irq;
+	gpio->irq		= client->irq;
 
 	return 0;
 
@@ -285,8 +285,8 @@ static int pcf857x_probe(struct i2c_client *client,
 	gpio->chip.ngpio		= id->driver_data;
 
 	/* enable gpio_to_irq() if platform has settings */
-	if (pdata && pdata->irq) {
-		status = pcf857x_irq_domain_init(gpio, pdata, &client->dev);
+	if (pdata && client->irq) {
+		status = pcf857x_irq_domain_init(gpio, pdata, client);
 		if (status < 0) {
 			dev_err(&client->dev, "irq_domain init failed\n");
 			goto fail;
@@ -368,15 +368,6 @@ static int pcf857x_probe(struct i2c_client *client,
 	if (status < 0)
 		goto fail;
 
-	/* NOTE: these chips can issue "some pin-changed" IRQs, which we
-	 * don't yet even try to use.  Among other issues, the relevant
-	 * genirq state isn't available to modular drivers; and most irq
-	 * methods can't be called from sleeping contexts.
-	 */
-
-	dev_info(&client->dev, "%s\n",
-			client->irq ? " (irq ignored)" : "");
-
 	/* Let platform code set up the GPIOs and their users.
 	 * Now is the first time anyone could use them.
 	 */
@@ -388,13 +379,15 @@ static int pcf857x_probe(struct i2c_client *client,
 			dev_warn(&client->dev, "setup --> %d\n", status);
 	}
 
+	dev_info(&client->dev, "probed\n");
+
 	return 0;
 
 fail:
 	dev_dbg(&client->dev, "probe error %d for '%s'\n",
 			status, client->name);
 
-	if (pdata && pdata->irq)
+	if (pdata && client->irq)
 		pcf857x_irq_domain_cleanup(gpio);
 
 	kfree(gpio);
@@ -418,7 +411,7 @@ static int pcf857x_remove(struct i2c_client *client)
 		}
 	}
 
-	if (pdata && pdata->irq)
+	if (pdata && client->irq)
 		pcf857x_irq_domain_cleanup(gpio);
 
 	status = gpiochip_remove(&gpio->chip);

include/linux/i2c/pcf857x.h

@@ -10,7 +10,6 @@
  * @setup: optional callback issued once the GPIOs are valid
  * @teardown: optional callback issued before the GPIOs are invalidated
  * @context: optional parameter passed to setup() and teardown()
- * @irq: optional interrupt number
  *
  * In addition to the I2C_BOARD_INFO() state appropriate to each chip,
  * the i2c_board_info used with the pcf875x driver must provide its
@@ -40,8 +39,6 @@ struct pcf857x_platform_data {
 					int gpio, unsigned ngpio,
 					void *context);
 	void		*context;
-
-	int		irq;
 };
 
 #endif /* __LINUX_PCF857X_H */