Merge tag 'bcm2835-dt-fixes-2017-10-06' into devicetree/fixes

This pull request brings in a fix for default serial console setup on
RPi3, so it now comes up with no config.txt/cmdline.txt settings in
the firmware.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

arch/arm/boot/dts/bcm2835-rpi-zero-w.dts

@@ -18,12 +18,9 @@ / {
 	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
 	model = "Raspberry Pi Zero W";
 
-	/* Needed by firmware to properly init UARTs */
-	aliases {
-		uart0 = "/soc/serial@7e201000";
-		uart1 = "/soc/serial@7e215040";
-		serial0 = "/soc/serial@7e201000";
-		serial1 = "/soc/serial@7e215040";
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
 	};
 
 	leds {

arch/arm/boot/dts/bcm2837-rpi-3-b.dts

@@ -8,6 +8,11 @@ / {
 	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
 	model = "Raspberry Pi 3 Model B";
 
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
 	memory {
 		reg = <0 0x40000000>;
 	};

arch/arm/boot/dts/bcm283x.dtsi

@@ -20,8 +20,13 @@ / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	chosen {
-		bootargs = "earlyprintk console=ttyAMA0";
+		stdout-path = "serial0:115200n8";
 	};
 
 	thermal-zones {