Merge branch 'dev_addr-const-fixes'

Jakub Kicinski says:

====================
ethernet: fix some esoteric drivers after netdev->dev_addr constification

Looking at recent fixes for drivers which don't get included with
allmodconfig builds I thought it's worth grepping for more instances of:

  dev->dev_addr\[.*\] =

This set contains the fixes.

v2: add last 3 patches which fix drivers for the RiscPC ARM platform.
Thanks to Arnd Bergmann for explaining how to build test that.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/3com/typhoon.c

@@ -2278,6 +2278,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct net_device *dev;
 	struct typhoon *tp;
 	int card_id = (int) ent->driver_data;
+	u8 addr[ETH_ALEN] __aligned(4);
 	void __iomem *ioaddr;
 	void *shared;
 	dma_addr_t shared_dma;
@@ -2409,8 +2410,9 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto error_out_reset;
 	}
 
-	*(__be16 *)&dev->dev_addr[0] = htons(le16_to_cpu(xp_resp[0].parm1));
-	*(__be32 *)&dev->dev_addr[2] = htonl(le32_to_cpu(xp_resp[0].parm2));
+	*(__be16 *)&addr[0] = htons(le16_to_cpu(xp_resp[0].parm1));
+	*(__be32 *)&addr[2] = htonl(le32_to_cpu(xp_resp[0].parm2));
+	eth_hw_addr_set(dev, addr);
 
 	if (!is_valid_ether_addr(dev->dev_addr)) {
 		err_msg = "Could not obtain valid ethernet address, aborting";

drivers/net/ethernet/8390/etherh.c

@@ -655,6 +655,7 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
 	struct ei_device *ei_local;
 	struct net_device *dev;
 	struct etherh_priv *eh;
+	u8 addr[ETH_ALEN];
 	int ret;
 
 	ret = ecard_request_resources(ec);
@@ -724,12 +725,13 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
 	spin_lock_init(&ei_local->page_lock);
 
 	if (ec->cid.product == PROD_ANT_ETHERM) {
-		etherm_addr(dev->dev_addr);
+		etherm_addr(addr);
 		ei_local->reg_offset = etherm_regoffsets;
 	} else {
-		etherh_addr(dev->dev_addr, ec);
+		etherh_addr(addr, ec);
 		ei_local->reg_offset = etherh_regoffsets;
 	}
+	eth_hw_addr_set(dev, addr);
 
 	ei_local->name          = dev->name;
 	ei_local->word16        = 1;

drivers/net/ethernet/broadcom/sb1250-mac.c

@@ -2183,9 +2183,7 @@ static int sbmac_init(struct platform_device *pldev, long long base)
 		ea_reg >>= 8;
 	}
 
-	for (i = 0; i < 6; i++) {
-		dev->dev_addr[i] = eaddr[i];
-	}
+	eth_hw_addr_set(dev, eaddr);
 
 	/*
 	 * Initialize context (get pointers to registers and stuff), then

drivers/net/ethernet/i825xx/ether1.c

@@ -986,6 +986,7 @@ static int
 ether1_probe(struct expansion_card *ec, const struct ecard_id *id)
 {
 	struct net_device *dev;
+	u8 addr[ETH_ALEN];
 	int i, ret = 0;
 
 	ether1_banner();
@@ -1015,7 +1016,8 @@ ether1_probe(struct expansion_card *ec, const struct ecard_id *id)
 	}
 
 	for (i = 0; i < 6; i++)
-		dev->dev_addr[i] = readb(IDPROM_ADDRESS + (i << 2));
+		addr[i] = readb(IDPROM_ADDRESS + (i << 2));
+	eth_hw_addr_set(dev, addr);
 
 	if (ether1_init_2(dev)) {
 		ret = -ENODEV;

drivers/net/ethernet/seeq/ether3.c

@@ -749,6 +749,7 @@ ether3_probe(struct expansion_card *ec, const struct ecard_id *id)
 	const struct ether3_data *data = id->data;
 	struct net_device *dev;
 	int bus_type, ret;
+	u8 addr[ETH_ALEN];
 
 	ether3_banner();
 
@@ -776,7 +777,8 @@ ether3_probe(struct expansion_card *ec, const struct ecard_id *id)
 	priv(dev)->seeq = priv(dev)->base + data->base_offset;
 	dev->irq = ec->irq;
 
-	ether3_addr(dev->dev_addr, ec);
+	ether3_addr(addr, ec);
+	eth_hw_addr_set(dev, addr);
 
 	priv(dev)->dev = dev;
 	timer_setup(&priv(dev)->timer, ether3_ledoff, 0);

drivers/net/ethernet/tundra/tsi108_eth.c

@@ -1091,20 +1091,22 @@ static int tsi108_get_mac(struct net_device *dev)
 	struct tsi108_prv_data *data = netdev_priv(dev);
 	u32 word1 = TSI_READ(TSI108_MAC_ADDR1);
 	u32 word2 = TSI_READ(TSI108_MAC_ADDR2);
+	u8 addr[ETH_ALEN];
 
 	/* Note that the octets are reversed from what the manual says,
 	 * producing an even weirder ordering...
 	 */
 	if (word2 == 0 && word1 == 0) {
-		dev->dev_addr[0] = 0x00;
-		dev->dev_addr[1] = 0x06;
-		dev->dev_addr[2] = 0xd2;
-		dev->dev_addr[3] = 0x00;
-		dev->dev_addr[4] = 0x00;
+		addr[0] = 0x00;
+		addr[1] = 0x06;
+		addr[2] = 0xd2;
+		addr[3] = 0x00;
+		addr[4] = 0x00;
 		if (0x8 == data->phy)
-			dev->dev_addr[5] = 0x01;
+			addr[5] = 0x01;
 		else
-			dev->dev_addr[5] = 0x02;
+			addr[5] = 0x02;
+		eth_hw_addr_set(dev, addr);
 
 		word2 = (dev->dev_addr[0] << 16) | (dev->dev_addr[1] << 24);
 
@@ -1114,12 +1116,13 @@ static int tsi108_get_mac(struct net_device *dev)
 		TSI_WRITE(TSI108_MAC_ADDR1, word1);
 		TSI_WRITE(TSI108_MAC_ADDR2, word2);
 	} else {
-		dev->dev_addr[0] = (word2 >> 16) & 0xff;
-		dev->dev_addr[1] = (word2 >> 24) & 0xff;
-		dev->dev_addr[2] = (word1 >> 0) & 0xff;
-		dev->dev_addr[3] = (word1 >> 8) & 0xff;
-		dev->dev_addr[4] = (word1 >> 16) & 0xff;
-		dev->dev_addr[5] = (word1 >> 24) & 0xff;
+		addr[0] = (word2 >> 16) & 0xff;
+		addr[1] = (word2 >> 24) & 0xff;
+		addr[2] = (word1 >> 0) & 0xff;
+		addr[3] = (word1 >> 8) & 0xff;
+		addr[4] = (word1 >> 16) & 0xff;
+		addr[5] = (word1 >> 24) & 0xff;
+		eth_hw_addr_set(dev, addr);
 	}
 
 	if (!is_valid_ether_addr(dev->dev_addr)) {
@@ -1136,14 +1139,12 @@ static int tsi108_set_mac(struct net_device *dev, void *addr)
 {
 	struct tsi108_prv_data *data = netdev_priv(dev);
 	u32 word1, word2;
-	int i;
 
 	if (!is_valid_ether_addr(addr))
 		return -EADDRNOTAVAIL;
 
-	for (i = 0; i < 6; i++)
-		/* +2 is for the offset of the HW addr type */
-		dev->dev_addr[i] = ((unsigned char *)addr)[i + 2];
+	/* +2 is for the offset of the HW addr type */
+	eth_hw_addr_set(dev, ((unsigned char *)addr) + 2);
 
 	word2 = (dev->dev_addr[0] << 16) | (dev->dev_addr[1] << 24);