Merge tag 'pci-v4.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:

 - recognize that a PCI-to-PCIe bridge originates a PCIe hierarchy, so
   we enumerate that hierarchy correctly

 - X-Gene: fix a change merged for v4.10 that broke MSI

 - Keystone: avoid reading undefined registers, which can cause
   asynchronous external aborts

 - Supermicro X8DTH-i/6/iF/6F: ignore broken _CRS that caused us to
   change (and break) existing I/O port assignments

* tag 'pci-v4.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/MSI: pci-xgene-msi: Fix CPU hotplug registration handling
  PCI: Enumerate switches below PCI-to-PCIe bridges
  x86/PCI: Ignore _CRS on Supermicro X8DTH-i/6/iF/6F
  PCI: designware: Check for iATU unroll only on platforms that use ATU

arch/x86/pci/acpi.c

@@ -114,6 +114,16 @@ static const struct dmi_system_id pci_crs_quirks[] __initconst = {
 			DMI_MATCH(DMI_BIOS_VERSION, "6JET85WW (1.43 )"),
 		},
 	},
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=42606 */
+	{
+		.callback = set_nouse_crs,
+		.ident = "Supermicro X8DTH",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X8DTH-i/6/iF/6F"),
+			DMI_MATCH(DMI_BIOS_VERSION, "2.0a"),
+		},
+	},
 
 	/* https://bugzilla.kernel.org/show_bug.cgi?id=15362 */
 	{

drivers/pci/host/pci-xgene-msi.c

@@ -517,7 +517,7 @@ static int xgene_msi_probe(struct platform_device *pdev)
 
 	rc = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "pci/xgene:online",
 			       xgene_msi_hwirq_alloc, NULL);
-	if (rc)
+	if (rc < 0)
 		goto err_cpuhp;
 	pci_xgene_online = rc;
 	rc = cpuhp_setup_state(CPUHP_PCI_XGENE_DEAD, "pci/xgene:dead", NULL,

drivers/pci/host/pcie-designware.c

@@ -807,11 +807,6 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 {
 	u32 val;
 
-	/* get iATU unroll support */
-	pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp);
-	dev_dbg(pp->dev, "iATU unroll: %s\n",
-		pp->iatu_unroll_enabled ? "enabled" : "disabled");
-
 	/* set the number of lanes */
 	val = dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL);
 	val &= ~PORT_LINK_MODE_MASK;
@@ -882,6 +877,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 	 * we should not program the ATU here.
 	 */
 	if (!pp->ops->rd_other_conf) {
+		/* get iATU unroll support */
+		pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp);
+		dev_dbg(pp->dev, "iATU unroll: %s\n",
+			pp->iatu_unroll_enabled ? "enabled" : "disabled");
+
 		dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0,
 					  PCIE_ATU_TYPE_MEM, pp->mem_base,
 					  pp->mem_bus_addr, pp->mem_size);

drivers/pci/probe.c

@@ -1169,6 +1169,7 @@ void set_pcie_port_type(struct pci_dev *pdev)
 	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
 	if (!pos)
 		return;
+
 	pdev->pcie_cap = pos;
 	pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, &reg16);
 	pdev->pcie_flags_reg = reg16;
@@ -1176,13 +1177,14 @@ void set_pcie_port_type(struct pci_dev *pdev)
 	pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
 
 	/*
-	 * A Root Port is always the upstream end of a Link.  No PCIe
-	 * component has two Links.  Two Links are connected by a Switch
-	 * that has a Port on each Link and internal logic to connect the
-	 * two Ports.
+	 * A Root Port or a PCI-to-PCIe bridge is always the upstream end
+	 * of a Link.  No PCIe component has two Links.  Two Links are
+	 * connected by a Switch that has a Port on each Link and internal
+	 * logic to connect the two Ports.
 	 */
 	type = pci_pcie_type(pdev);
-	if (type == PCI_EXP_TYPE_ROOT_PORT)
+	if (type == PCI_EXP_TYPE_ROOT_PORT ||
+	    type == PCI_EXP_TYPE_PCIE_BRIDGE)
 		pdev->has_secondary_link = 1;
 	else if (type == PCI_EXP_TYPE_UPSTREAM ||
 		 type == PCI_EXP_TYPE_DOWNSTREAM) {