Merge branch 'clockevents/4.12' of...

Merge branch 'clockevents/4.12' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clockevents updates from Daniel Lezcano

- Provide a framework to handle errata gracefuly for arm_arch_timer (Mark
   Zyngier)

 - Clarify the DT properties for the rockchip timer and add the clocksource as
   an alternative to the bogus architected timer (Alexander Kochetkov)

 - Rename the Gemini timer to Faraday timer fttmr010 and provide a specific
   initialization for Gemini (Linus Walleij)

 - Add missing newlines in the error message in the timers (Rafał Miłecki)

 - Read the clock once and implement the delay timer on Orion (Russell King)

Documentation/arm64/silicon-errata.txt

@@ -54,6 +54,7 @@ stable kernels.
 | ARM            | Cortex-A57      | #852523         | N/A                         |
 | ARM            | Cortex-A57      | #834220         | ARM64_ERRATUM_834220        |
 | ARM            | Cortex-A72      | #853709         | N/A                         |
+| ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
 | ARM            | MMU-500         | #841119,#826419 | N/A                         |
 |                |                 |                 |                             |
 | Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375        |

Documentation/devicetree/bindings/timer/cortina,gemini-timer.txt

-Cortina Systems Gemini timer
-
-This timer is embedded in the Cortina Systems Gemini SoCs.
-
-Required properties:
-
-- compatible : Must be "cortina,gemini-timer"
-- reg : Should contain registers location and length
-- interrupts : Should contain the three timer interrupts with
-  flags for rising edge
-- syscon : a phandle to the global Gemini system controller
-
-Example:
-
-timer@43000000 {
-	compatible = "cortina,gemini-timer";
-	reg = <0x43000000 0x1000>;
-	interrupts = <14 IRQ_TYPE_EDGE_RISING>, /* Timer 1 */
-		   <15 IRQ_TYPE_EDGE_RISING>, /* Timer 2 */
-		   <16 IRQ_TYPE_EDGE_RISING>; /* Timer 3 */
-	syscon = <&syscon>;
-};

Documentation/devicetree/bindings/timer/faraday,fttmr010.txt

+Faraday Technology timer
+
+This timer is a generic IP block from Faraday Technology, embedded in the
+Cortina Systems Gemini SoCs and other designs.
+
+Required properties:
+
+- compatible : Must be one of
+  "faraday,fttmr010"
+  "cortina,gemini-timer"
+- reg : Should contain registers location and length
+- interrupts : Should contain the three timer interrupts usually with
+  flags for falling edge
+
+Optionally required properties:
+
+- clocks : a clock to provide the tick rate for "faraday,fttmr010"
+- clock-names : should be "EXTCLK" and "PCLK" for the external tick timer
+  and peripheral clock respectively, for "faraday,fttmr010"
+- syscon : a phandle to the global Gemini system controller if the compatible
+  type is "cortina,gemini-timer"
+
+Example:
+
+timer@43000000 {
+	compatible = "faraday,fttmr010";
+	reg = <0x43000000 0x1000>;
+	interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
+		   <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
+		   <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
+	clocks = <&extclk>, <&pclk>;
+	clock-names = "EXTCLK", "PCLK";
+};

Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt

 Rockchip rk timer
 
 Required properties:
-- compatible: shall be one of:
-  "rockchip,rk3288-timer" - for rk3066, rk3036, rk3188, rk322x, rk3288, rk3368
-  "rockchip,rk3399-timer" - for rk3399
+- compatible: should be:
+  "rockchip,rk3036-timer", "rockchip,rk3288-timer": for Rockchip RK3036
+  "rockchip,rk3066-timer", "rockchip,rk3288-timer": for Rockchip RK3066
+  "rockchip,rk3188-timer", "rockchip,rk3288-timer": for Rockchip RK3188
+  "rockchip,rk3228-timer", "rockchip,rk3288-timer": for Rockchip RK3228
+  "rockchip,rk3229-timer", "rockchip,rk3288-timer": for Rockchip RK3229
+  "rockchip,rk3288-timer": for Rockchip RK3288
+  "rockchip,rk3368-timer", "rockchip,rk3288-timer": for Rockchip RK3368
+  "rockchip,rk3399-timer": for Rockchip RK3399
 - reg: base address of the timer register starting with TIMERS CONTROL register
 - interrupts: should contain the interrupts for Timer0
 - clocks : must contain an entry for each entry in clock-names

arch/arm/boot/dts/rk3188.dtsi

@@ -106,6 +106,22 @@ smp-sram@0 {
 		};
 	};
 
+	timer3: timer@2000e000 {
+		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
+		reg = <0x2000e000 0x20>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TIMER3>, <&cru PCLK_TIMER3>;
+		clock-names = "timer", "pclk";
+	};
+
+	timer6: timer@200380a0 {
+		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
+		reg = <0x200380a0 0x20>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TIMER6>, <&cru PCLK_TIMER0>;
+		clock-names = "timer", "pclk";
+	};
+
 	i2s0: i2s@1011a000 {
 		compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s";
 		reg = <0x1011a000 0x2000>;
@@ -530,6 +546,7 @@ &emac {
 
 &global_timer {
 	interrupts = <GIC_PPI 11 0xf04>;
+	status = "disabled";
 };
 
 &local_timer {

arch/arm/boot/dts/rk322x.dtsi

@@ -325,7 +325,7 @@ pwm3: pwm@110b0030 {
 	};
 
 	timer: timer@110c0000 {
-		compatible = "rockchip,rk3288-timer";
+		compatible = "rockchip,rk3228-timer", "rockchip,rk3288-timer";
 		reg = <0x110c0000 0x20>;
 		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&xin24m>, <&cru PCLK_TIMER>;

arch/arm64/include/asm/arch_timer.h

@@ -25,6 +25,7 @@
 #include <linux/bug.h>
 #include <linux/init.h>
 #include <linux/jump_label.h>
+#include <linux/smp.h>
 #include <linux/types.h>
 
 #include <clocksource/arm_arch_timer.h>
@@ -37,24 +38,44 @@ extern struct static_key_false arch_timer_read_ool_enabled;
 #define needs_unstable_timer_counter_workaround()  false
 #endif
 
+enum arch_timer_erratum_match_type {
+	ate_match_dt,
+	ate_match_local_cap_id,
+	ate_match_acpi_oem_info,
+};
+
+struct clock_event_device;
 
 struct arch_timer_erratum_workaround {
-	const char *id;		/* Indicate the Erratum ID */
+	enum arch_timer_erratum_match_type match_type;
+	const void *id;
+	const char *desc;
 	u32 (*read_cntp_tval_el0)(void);
 	u32 (*read_cntv_tval_el0)(void);
 	u64 (*read_cntvct_el0)(void);
+	int (*set_next_event_phys)(unsigned long, struct clock_event_device *);
+	int (*set_next_event_virt)(unsigned long, struct clock_event_device *);
 };
 
-extern const struct arch_timer_erratum_workaround *timer_unstable_counter_workaround;
-
-#define arch_timer_reg_read_stable(reg) 		\
-({							\
-	u64 _val;					\
-	if (needs_unstable_timer_counter_workaround())		\
-		_val = timer_unstable_counter_workaround->read_##reg();\
-	else						\
-		_val = read_sysreg(reg);		\
-	_val;						\
+DECLARE_PER_CPU(const struct arch_timer_erratum_workaround *,
+		timer_unstable_counter_workaround);
+
+#define arch_timer_reg_read_stable(reg)					\
+({									\
+	u64 _val;							\
+	if (needs_unstable_timer_counter_workaround()) {		\
+		const struct arch_timer_erratum_workaround *wa;		\
+		preempt_disable();					\
+		wa = __this_cpu_read(timer_unstable_counter_workaround); \
+		if (wa && wa->read_##reg)				\
+			_val = wa->read_##reg();			\
+		else							\
+			_val = read_sysreg(reg);			\
+		preempt_enable();					\
+	} else {							\
+		_val = read_sysreg(reg);				\
+	}								\
+	_val;								\
 })
 
 /*

arch/arm64/include/asm/cpucaps.h

@@ -37,7 +37,8 @@
 #define ARM64_HAS_NO_FPSIMD			16
 #define ARM64_WORKAROUND_REPEAT_TLBI		17
 #define ARM64_WORKAROUND_QCOM_FALKOR_E1003	18
+#define ARM64_WORKAROUND_858921			19
 
-#define ARM64_NCAPS				19
+#define ARM64_NCAPS				20
 
 #endif /* __ASM_CPUCAPS_H */

arch/arm64/include/asm/cputype.h

@@ -80,6 +80,7 @@
 #define ARM_CPU_PART_FOUNDATION		0xD00
 #define ARM_CPU_PART_CORTEX_A57		0xD07
 #define ARM_CPU_PART_CORTEX_A53		0xD03
+#define ARM_CPU_PART_CORTEX_A73		0xD09
 
 #define APM_CPU_PART_POTENZA		0x000
 
@@ -92,6 +93,7 @@
 
 #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
 #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
+#define MIDR_CORTEX_A73 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A73)
 #define MIDR_THUNDERX	MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)
 #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
 #define MIDR_QCOM_FALKOR_V1 MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR_V1)

arch/arm64/include/asm/esr.h

@@ -175,6 +175,8 @@
 #define ESR_ELx_SYS64_ISS_SYS_CTR_READ	(ESR_ELx_SYS64_ISS_SYS_CTR | \
 					 ESR_ELx_SYS64_ISS_DIR_READ)
 
+#define ESR_ELx_SYS64_ISS_SYS_CNTVCT	(ESR_ELx_SYS64_ISS_SYS_VAL(3, 3, 2, 14, 0) | \
+					 ESR_ELx_SYS64_ISS_DIR_READ)
 #ifndef __ASSEMBLY__
 #include <asm/types.h>
 

arch/arm64/kernel/cpu_errata.c

@@ -53,6 +53,13 @@ static int cpu_enable_trap_ctr_access(void *__unused)
 	.midr_range_min = min, \
 	.midr_range_max = max
 
+#define MIDR_ALL_VERSIONS(model) \
+	.def_scope = SCOPE_LOCAL_CPU, \
+	.matches = is_affected_midr_range, \
+	.midr_model = model, \
+	.midr_range_min = 0, \
+	.midr_range_max = (MIDR_VARIANT_MASK | MIDR_REVISION_MASK)
+
 const struct arm64_cpu_capabilities arm64_errata[] = {
 #if	defined(CONFIG_ARM64_ERRATUM_826319) || \
 	defined(CONFIG_ARM64_ERRATUM_827319) || \
@@ -150,6 +157,14 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 			   MIDR_CPU_VAR_REV(0, 0),
 			   MIDR_CPU_VAR_REV(0, 0)),
 	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_858921
+	{
+	/* Cortex-A73 all versions */
+		.desc = "ARM erratum 858921",
+		.capability = ARM64_WORKAROUND_858921,
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A73),
+	},
 #endif
 	{
 	}

arch/arm64/kernel/cpufeature.c

@@ -1090,20 +1090,29 @@ static void __init setup_feature_capabilities(void)
  * Check if the current CPU has a given feature capability.
  * Should be called from non-preemptible context.
  */
-bool this_cpu_has_cap(unsigned int cap)
+static bool __this_cpu_has_cap(const struct arm64_cpu_capabilities *cap_array,
+			       unsigned int cap)
 {
 	const struct arm64_cpu_capabilities *caps;
 
 	if (WARN_ON(preemptible()))
 		return false;
 
-	for (caps = arm64_features; caps->desc; caps++)
+	for (caps = cap_array; caps->desc; caps++)
 		if (caps->capability == cap && caps->matches)
 			return caps->matches(caps, SCOPE_LOCAL_CPU);
 
 	return false;
 }
 
+extern const struct arm64_cpu_capabilities arm64_errata[];
+
+bool this_cpu_has_cap(unsigned int cap)
+{
+	return (__this_cpu_has_cap(arm64_features, cap) ||
+		__this_cpu_has_cap(arm64_errata, cap));
+}
+
 void __init setup_cpu_features(void)
 {
 	u32 cwg;

arch/arm64/kernel/traps.c

@@ -505,6 +505,14 @@ static void ctr_read_handler(unsigned int esr, struct pt_regs *regs)
 	regs->pc += 4;
 }
 
+static void cntvct_read_handler(unsigned int esr, struct pt_regs *regs)
+{
+	int rt = (esr & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT;
+
+	pt_regs_write_reg(regs, rt, arch_counter_get_cntvct());
+	regs->pc += 4;
+}
+
 struct sys64_hook {
 	unsigned int esr_mask;
 	unsigned int esr_val;
@@ -523,6 +531,12 @@ static struct sys64_hook sys64_hooks[] = {
 		.esr_val = ESR_ELx_SYS64_ISS_SYS_CTR_READ,
 		.handler = ctr_read_handler,
 	},
+	{
+		/* Trap read access to CNTVCT_EL0 */
+		.esr_mask = ESR_ELx_SYS64_ISS_SYS_OP_MASK,
+		.esr_val = ESR_ELx_SYS64_ISS_SYS_CNTVCT,
+		.handler = cntvct_read_handler,
+	},
 	{},
 };
 

drivers/clocksource/Kconfig

@@ -67,20 +67,22 @@ config DW_APB_TIMER_OF
 	select DW_APB_TIMER
 	select CLKSRC_OF
 
-config GEMINI_TIMER
-	bool "Cortina Gemini timer driver" if COMPILE_TEST
+config FTTMR010_TIMER
+	bool "Faraday Technology timer driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
 	depends on HAS_IOMEM
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 	select MFD_SYSCON
 	help
-	  Enables support for the Gemini timer
+	  Enables support for the Faraday Technology timer block
+	  FTTMR010.
 
 config ROCKCHIP_TIMER
 	bool "Rockchip timer driver" if COMPILE_TEST
 	depends on ARM || ARM64
 	select CLKSRC_OF
+	select CLKSRC_MMIO
 	help
 	  Enables the support for the rockchip timer driver.
 
@@ -366,6 +368,17 @@ config HISILICON_ERRATUM_161010101
 	  161010101. The workaround will be active if the hisilicon,erratum-161010101
 	  property is found in the timer node.
 
+config ARM64_ERRATUM_858921
+	bool "Workaround for Cortex-A73 erratum 858921"
+	default y
+	select ARM_ARCH_TIMER_OOL_WORKAROUND
+	depends on ARM_ARCH_TIMER && ARM64
+	help
+	  This option enables a workaround applicable to Cortex-A73
+	  (all versions), whose counter may return incorrect values.
+	  The workaround will be dynamically enabled when an affected
+	  core is detected.
+
 config ARM_GLOBAL_TIMER
 	bool "Support for the ARM global timer" if COMPILE_TEST
 	select CLKSRC_OF if OF

drivers/clocksource/Makefile

@@ -17,7 +17,7 @@ obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
 obj-$(CONFIG_DIGICOLOR_TIMER)	+= timer-digicolor.o
 obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
 obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
-obj-$(CONFIG_GEMINI_TIMER)	+= timer-gemini.o
+obj-$(CONFIG_FTTMR010_TIMER)	+= timer-fttmr010.o
 obj-$(CONFIG_ROCKCHIP_TIMER)      += rockchip_timer.o
 obj-$(CONFIG_CLKSRC_NOMADIK_MTU)	+= nomadik-mtu.o
 obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o

drivers/clocksource/arc_timer.c

@@ -37,7 +37,7 @@ static int noinline arc_get_timer_clk(struct device_node *node)
 
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk)) {
-		pr_err("timer missing clk");
+		pr_err("timer missing clk\n");
 		return PTR_ERR(clk);
 	}
 
@@ -89,7 +89,7 @@ static int __init arc_cs_setup_gfrc(struct device_node *node)
 
 	READ_BCR(ARC_REG_MCIP_BCR, mp);
 	if (!mp.gfrc) {
-		pr_warn("Global-64-bit-Ctr clocksource not detected");
+		pr_warn("Global-64-bit-Ctr clocksource not detected\n");
 		return -ENXIO;
 	}
 
@@ -140,13 +140,13 @@ static int __init arc_cs_setup_rtc(struct device_node *node)
 
 	READ_BCR(ARC_REG_TIMERS_BCR, timer);
 	if (!timer.rtc) {
-		pr_warn("Local-64-bit-Ctr clocksource not detected");
+		pr_warn("Local-64-bit-Ctr clocksource not detected\n");
 		return -ENXIO;
 	}
 
 	/* Local to CPU hence not usable in SMP */
 	if (IS_ENABLED(CONFIG_SMP)) {
-		pr_warn("Local-64-bit-Ctr not usable in SMP");
+		pr_warn("Local-64-bit-Ctr not usable in SMP\n");
 		return -EINVAL;
 	}
 
@@ -290,13 +290,13 @@ static int __init arc_clockevent_setup(struct device_node *node)
 
 	arc_timer_irq = irq_of_parse_and_map(node, 0);
 	if (arc_timer_irq <= 0) {
-		pr_err("clockevent: missing irq");
+		pr_err("clockevent: missing irq\n");
 		return -EINVAL;
 	}
 
 	ret = arc_get_timer_clk(node);
 	if (ret) {
-		pr_err("clockevent: missing clk");
+		pr_err("clockevent: missing clk\n");
 		return ret;
 	}
 
@@ -313,7 +313,7 @@ static int __init arc_clockevent_setup(struct device_node *node)
 				arc_timer_starting_cpu,
 				arc_timer_dying_cpu);
 	if (ret) {
-		pr_err("Failed to setup hotplug state");
+		pr_err("Failed to setup hotplug state\n");
 		return ret;
 	}
 	return 0;

drivers/clocksource/asm9260_timer.c

@@ -193,7 +193,7 @@ static int __init asm9260_timer_init(struct device_node *np)
 
 	priv.base = of_io_request_and_map(np, 0, np->name);
 	if (IS_ERR(priv.base)) {
-		pr_err("%s: unable to map resource", np->name);
+		pr_err("%s: unable to map resource\n", np->name);
 		return PTR_ERR(priv.base);
 	}
 

drivers/clocksource/bcm2835_timer.c

@@ -89,13 +89,13 @@ static int __init bcm2835_timer_init(struct device_node *node)
 
 	base = of_iomap(node, 0);
 	if (!base) {
-		pr_err("Can't remap registers");
+		pr_err("Can't remap registers\n");
 		return -ENXIO;
 	}
 
 	ret = of_property_read_u32(node, "clock-frequency", &freq);
 	if (ret) {
-		pr_err("Can't read clock-frequency");
+		pr_err("Can't read clock-frequency\n");
 		goto err_iounmap;
 	}
 
@@ -107,7 +107,7 @@ static int __init bcm2835_timer_init(struct device_node *node)
 
 	irq = irq_of_parse_and_map(node, DEFAULT_TIMER);
 	if (irq <= 0) {
-		pr_err("Can't parse IRQ");
+		pr_err("Can't parse IRQ\n");
 		ret = -EINVAL;
 		goto err_iounmap;
 	}

drivers/clocksource/bcm_kona_timer.c

@@ -179,7 +179,7 @@ static int __init kona_timer_init(struct device_node *node)
 	} else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
 		arch_timer_rate = freq;
 	} else {
-		pr_err("Kona Timer v1 unable to determine clock-frequency");
+		pr_err("Kona Timer v1 unable to determine clock-frequency\n");
 		return -EINVAL;
 	}
 

drivers/clocksource/clksrc-probe.c

@@ -40,7 +40,7 @@ void __init clocksource_probe(void)
 
 		ret = init_func_ret(np);
 		if (ret) {
-			pr_err("Failed to initialize '%s': %d",
+			pr_err("Failed to initialize '%s': %d\n",
 			       of_node_full_name(np), ret);
 			continue;
 		}

drivers/clocksource/dw_apb_timer.c

@@ -101,7 +101,7 @@ static irqreturn_t dw_apb_clockevent_irq(int irq, void *data)
 	struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
 
 	if (!evt->event_handler) {
-		pr_info("Spurious APBT timer interrupt %d", irq);
+		pr_info("Spurious APBT timer interrupt %d\n", irq);
 		return IRQ_NONE;
 	}
 

drivers/clocksource/meson6_timer.c

@@ -133,13 +133,13 @@ static int __init meson6_timer_init(struct device_node *node)
 
 	timer_base = of_io_request_and_map(node, 0, "meson6-timer");
 	if (IS_ERR(timer_base)) {
-		pr_err("Can't map registers");
+		pr_err("Can't map registers\n");
 		return -ENXIO;
 	}
 
 	irq = irq_of_parse_and_map(node, 0);
 	if (irq <= 0) {
-		pr_err("Can't parse IRQ");
+		pr_err("Can't parse IRQ\n");
 		return -EINVAL;
 	}
 

drivers/clocksource/mips-gic-timer.c

@@ -174,7 +174,7 @@ static int __init gic_clocksource_of_init(struct device_node *node)
 
 	if (!gic_present || !node->parent ||
 	    !of_device_is_compatible(node->parent, "mti,gic")) {
-		pr_warn("No DT definition for the mips gic driver");
+		pr_warn("No DT definition for the mips gic driver\n");
 		return -ENXIO;
 	}
 

drivers/clocksource/nomadik-mtu.c

@@ -260,25 +260,25 @@ static int __init nmdk_timer_of_init(struct device_node *node)
 
 	base = of_iomap(node, 0);
 	if (!base) {
-		pr_err("Can't remap registers");
+		pr_err("Can't remap registers\n");
 		return -ENXIO;
 	}
 
 	pclk = of_clk_get_by_name(node, "apb_pclk");
 	if (IS_ERR(pclk)) {
-		pr_err("could not get apb_pclk");
+		pr_err("could not get apb_pclk\n");
 		return PTR_ERR(pclk);
 	}
 
 	clk = of_clk_get_by_name(node, "timclk");
 	if (IS_ERR(clk)) {
-		pr_err("could not get timclk");
+		pr_err("could not get timclk\n");
 		return PTR_ERR(clk);
 	}
 
 	irq = irq_of_parse_and_map(node, 0);
 	if (irq <= 0) {
-		pr_err("Can't parse IRQ");
+		pr_err("Can't parse IRQ\n");
 		return -EINVAL;
 	}
 

drivers/clocksource/pxa_timer.c

@@ -166,14 +166,14 @@ static int __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
 
 	ret = setup_irq(irq, &pxa_ost0_irq);
 	if (ret) {
-		pr_err("Failed to setup irq");
+		pr_err("Failed to setup irq\n");
 		return ret;
 	}
 
 	ret = clocksource_mmio_init(timer_base + OSCR, "oscr0", clock_tick_rate, 200,
 				    32, clocksource_mmio_readl_up);
 	if (ret) {
-		pr_err("Failed to init clocksource");
+		pr_err("Failed to init clocksource\n");
 		return ret;
 	}
 
@@ -203,7 +203,7 @@ static int __init pxa_timer_dt_init(struct device_node *np)
 
 	ret = clk_prepare_enable(clk);
 	if (ret) {
-		pr_crit("Failed to prepare clock");
+		pr_crit("Failed to prepare clock\n");
 		return ret;
 	}
 

drivers/clocksource/rockchip_timer.c

@@ -11,6 +11,8 @@
 #include <linux/clockchips.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -19,6 +21,8 @@
 
 #define TIMER_LOAD_COUNT0	0x00
 #define TIMER_LOAD_COUNT1	0x04
+#define TIMER_CURRENT_VALUE0	0x08
+#define TIMER_CURRENT_VALUE1	0x0C
 #define TIMER_CONTROL_REG3288	0x10
 #define TIMER_CONTROL_REG3399	0x1c
 #define TIMER_INT_STATUS	0x18
@@ -29,103 +33,118 @@
 #define TIMER_MODE_USER_DEFINED_COUNT		(1 << 1)
 #define TIMER_INT_UNMASK			(1 << 2)
 
-struct bc_timer {
-	struct clock_event_device ce;
+struct rk_timer {
 	void __iomem *base;
 	void __iomem *ctrl;
+	struct clk *clk;
+	struct clk *pclk;
 	u32 freq;
+	int irq;
 };
 
-static struct bc_timer bc_timer;
-
-static inline struct bc_timer *rk_timer(struct clock_event_device *ce)
-{
-	return container_of(ce, struct bc_timer, ce);
-}
+struct rk_clkevt {
+	struct clock_event_device ce;
+	struct rk_timer timer;
+};
 
-static inline void __iomem *rk_base(struct clock_event_device *ce)
-{
-	return rk_timer(ce)->base;
-}
+static struct rk_clkevt *rk_clkevt;
+static struct rk_timer *rk_clksrc;
 
-static inline void __iomem *rk_ctrl(struct clock_event_device *ce)
+static inline struct rk_timer *rk_timer(struct clock_event_device *ce)
 {
-	return rk_timer(ce)->ctrl;
+	return &container_of(ce, struct rk_clkevt, ce)->timer;
 }
 
-static inline void rk_timer_disable(struct clock_event_device *ce)
+static inline void rk_timer_disable(struct rk_timer *timer)
 {
-	writel_relaxed(TIMER_DISABLE, rk_ctrl(ce));
+	writel_relaxed(TIMER_DISABLE, timer->ctrl);
 }
 
-static inline void rk_timer_enable(struct clock_event_device *ce, u32 flags)
+static inline void rk_timer_enable(struct rk_timer *timer, u32 flags)
 {
-	writel_relaxed(TIMER_ENABLE | TIMER_INT_UNMASK | flags,
-		       rk_ctrl(ce));
+	writel_relaxed(TIMER_ENABLE | flags, timer->ctrl);
 }
 
 static void rk_timer_update_counter(unsigned long cycles,
-				    struct clock_event_device *ce)
+				    struct rk_timer *timer)
 {
-	writel_relaxed(cycles, rk_base(ce) + TIMER_LOAD_COUNT0);
-	writel_relaxed(0, rk_base(ce) + TIMER_LOAD_COUNT1);
+	writel_relaxed(cycles, timer->base + TIMER_LOAD_COUNT0);
+	writel_relaxed(0, timer->base + TIMER_LOAD_COUNT1);
 }
 
-static void rk_timer_interrupt_clear(struct clock_event_device *ce)
+static void rk_timer_interrupt_clear(struct rk_timer *timer)
 {
-	writel_relaxed(1, rk_base(ce) + TIMER_INT_STATUS);
+	writel_relaxed(1, timer->base + TIMER_INT_STATUS);
 }
 
 static inline int rk_timer_set_next_event(unsigned long cycles,
 					  struct clock_event_device *ce)
 {
-	rk_timer_disable(ce);
-	rk_timer_update_counter(cycles, ce);
-	rk_timer_enable(ce, TIMER_MODE_USER_DEFINED_COUNT);
+	struct rk_timer *timer = rk_timer(ce);
+
+	rk_timer_disable(timer);
+	rk_timer_update_counter(cycles, timer);
+	rk_timer_enable(timer, TIMER_MODE_USER_DEFINED_COUNT |
+			       TIMER_INT_UNMASK);
 	return 0;
 }
 
 static int rk_timer_shutdown(struct clock_event_device *ce)
 {
-	rk_timer_disable(ce);
+	struct rk_timer *timer = rk_timer(ce);
+
+	rk_timer_disable(timer);
 	return 0;
 }
 
 static int rk_timer_set_periodic(struct clock_event_device *ce)
 {
-	rk_timer_disable(ce);
-	rk_timer_update_counter(rk_timer(ce)->freq / HZ - 1, ce);
-	rk_timer_enable(ce, TIMER_MODE_FREE_RUNNING);
+	struct rk_timer *timer = rk_timer(ce);
+
+	rk_timer_disable(timer);
+	rk_timer_update_counter(timer->freq / HZ - 1, timer);
+	rk_timer_enable(timer, TIMER_MODE_FREE_RUNNING | TIMER_INT_UNMASK);
 	return 0;
 }
 
 static irqreturn_t rk_timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *ce = dev_id;
+	struct rk_timer *timer = rk_timer(ce);
 
-	rk_timer_interrupt_clear(ce);
+	rk_timer_interrupt_clear(timer);
 
 	if (clockevent_state_oneshot(ce))
-		rk_timer_disable(ce);
+		rk_timer_disable(timer);
 
 	ce->event_handler(ce);
 
 	return IRQ_HANDLED;
 }
 
-static int __init rk_timer_init(struct device_node *np, u32 ctrl_reg)
+static u64 notrace rk_timer_sched_read(void)
+{
+	return ~readl_relaxed(rk_clksrc->base + TIMER_CURRENT_VALUE0);
+}
+
+static int __init
+rk_timer_probe(struct rk_timer *timer, struct device_node *np)
 {
-	struct clock_event_device *ce = &bc_timer.ce;
 	struct clk *timer_clk;
 	struct clk *pclk;
 	int ret = -EINVAL, irq;
+	u32 ctrl_reg = TIMER_CONTROL_REG3288;
 
-	bc_timer.base = of_iomap(np, 0);
-	if (!bc_timer.base) {
+	timer->base = of_iomap(np, 0);
+	if (!timer->base) {
 		pr_err("Failed to get base address for '%s'\n", TIMER_NAME);
 		return -ENXIO;
 	}
-	bc_timer.ctrl = bc_timer.base + ctrl_reg;
+
+	if (of_device_is_compatible(np, "rockchip,rk3399-timer"))
+		ctrl_reg = TIMER_CONTROL_REG3399;
+
+	timer->ctrl = timer->base + ctrl_reg;
 
 	pclk = of_clk_get_by_name(np, "pclk");
 	if (IS_ERR(pclk)) {
@@ -139,6 +158,7 @@ static int __init rk_timer_init(struct device_node *np, u32 ctrl_reg)
 		pr_err("Failed to enable pclk for '%s'\n", TIMER_NAME);
 		goto out_unmap;
 	}
+	timer->pclk = pclk;
 
 	timer_clk = of_clk_get_by_name(np, "timer");
 	if (IS_ERR(timer_clk)) {
@@ -152,8 +172,9 @@ static int __init rk_timer_init(struct device_node *np, u32 ctrl_reg)
 		pr_err("Failed to enable timer clock\n");
 		goto out_timer_clk;
 	}
+	timer->clk = timer_clk;
 
-	bc_timer.freq = clk_get_rate(timer_clk);
+	timer->freq = clk_get_rate(timer_clk);
 
 	irq = irq_of_parse_and_map(np, 0);
 	if (!irq) {
@@ -161,51 +182,126 @@ static int __init rk_timer_init(struct device_node *np, u32 ctrl_reg)
 		pr_err("Failed to map interrupts for '%s'\n", TIMER_NAME);
 		goto out_irq;
 	}
+	timer->irq = irq;
+
+	rk_timer_interrupt_clear(timer);
+	rk_timer_disable(timer);
+	return 0;
+
+out_irq:
+	clk_disable_unprepare(timer_clk);
+out_timer_clk:
+	clk_disable_unprepare(pclk);
+out_unmap:
+	iounmap(timer->base);
+
+	return ret;
+}
+
+static void __init rk_timer_cleanup(struct rk_timer *timer)
+{
+	clk_disable_unprepare(timer->clk);
+	clk_disable_unprepare(timer->pclk);
+	iounmap(timer->base);
+}
+
+static int __init rk_clkevt_init(struct device_node *np)
+{
+	struct clock_event_device *ce;
+	int ret = -EINVAL;
+
+	rk_clkevt = kzalloc(sizeof(struct rk_clkevt), GFP_KERNEL);
+	if (!rk_clkevt) {
+		ret = -ENOMEM;
+		goto out;
+	}
 
+	ret = rk_timer_probe(&rk_clkevt->timer, np);
+	if (ret)
+		goto out_probe;
+
+	ce = &rk_clkevt->ce;
 	ce->name = TIMER_NAME;
 	ce->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
 		       CLOCK_EVT_FEAT_DYNIRQ;
 	ce->set_next_event = rk_timer_set_next_event;
 	ce->set_state_shutdown = rk_timer_shutdown;
 	ce->set_state_periodic = rk_timer_set_periodic;
-	ce->irq = irq;
+	ce->irq = rk_clkevt->timer.irq;
 	ce->cpumask = cpu_possible_mask;
 	ce->rating = 250;
 
-	rk_timer_interrupt_clear(ce);
-	rk_timer_disable(ce);
-
-	ret = request_irq(irq, rk_timer_interrupt, IRQF_TIMER, TIMER_NAME, ce);
+	ret = request_irq(rk_clkevt->timer.irq, rk_timer_interrupt, IRQF_TIMER,
+			  TIMER_NAME, ce);
 	if (ret) {
-		pr_err("Failed to initialize '%s': %d\n", TIMER_NAME, ret);
+		pr_err("Failed to initialize '%s': %d\n",
+			TIMER_NAME, ret);
 		goto out_irq;
 	}
 
-	clockevents_config_and_register(ce, bc_timer.freq, 1, UINT_MAX);
-
+	clockevents_config_and_register(&rk_clkevt->ce,
+					rk_clkevt->timer.freq, 1, UINT_MAX);
 	return 0;
 
 out_irq:
-	clk_disable_unprepare(timer_clk);
-out_timer_clk:
-	clk_disable_unprepare(pclk);
-out_unmap:
-	iounmap(bc_timer.base);
-
+	rk_timer_cleanup(&rk_clkevt->timer);
+out_probe:
+	kfree(rk_clkevt);
+out:
+	/* Leave rk_clkevt not NULL to prevent future init */
+	rk_clkevt = ERR_PTR(ret);
 	return ret;
 }
 
-static int __init rk3288_timer_init(struct device_node *np)
+static int __init rk_clksrc_init(struct device_node *np)
 {
-	return rk_timer_init(np, TIMER_CONTROL_REG3288);
+	int ret = -EINVAL;
+
+	rk_clksrc = kzalloc(sizeof(struct rk_timer), GFP_KERNEL);
+	if (!rk_clksrc) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = rk_timer_probe(rk_clksrc, np);
+	if (ret)
+		goto out_probe;
+
+	rk_timer_update_counter(UINT_MAX, rk_clksrc);
+	rk_timer_enable(rk_clksrc, 0);
+
+	ret = clocksource_mmio_init(rk_clksrc->base + TIMER_CURRENT_VALUE0,
+		TIMER_NAME, rk_clksrc->freq, 250, 32,
+		clocksource_mmio_readl_down);
+	if (ret) {
+		pr_err("Failed to register clocksource");
+		goto out_clocksource;
+	}
+
+	sched_clock_register(rk_timer_sched_read, 32, rk_clksrc->freq);
+	return 0;
+
+out_clocksource:
+	rk_timer_cleanup(rk_clksrc);
+out_probe:
+	kfree(rk_clksrc);
+out:
+	/* Leave rk_clksrc not NULL to prevent future init */
+	rk_clksrc = ERR_PTR(ret);
+	return ret;
 }
 
-static int __init rk3399_timer_init(struct device_node *np)
+static int __init rk_timer_init(struct device_node *np)
 {
-	return rk_timer_init(np, TIMER_CONTROL_REG3399);
+	if (!rk_clkevt)
+		return rk_clkevt_init(np);
+
+	if (!rk_clksrc)
+		return rk_clksrc_init(np);
+
+	pr_err("Too many timer definitions for '%s'\n", TIMER_NAME);
+	return -EINVAL;
 }
 
-CLOCKSOURCE_OF_DECLARE(rk3288_timer, "rockchip,rk3288-timer",
-		       rk3288_timer_init);
-CLOCKSOURCE_OF_DECLARE(rk3399_timer, "rockchip,rk3399-timer",
-		       rk3399_timer_init);
+CLOCKSOURCE_OF_DECLARE(rk3288_timer, "rockchip,rk3288-timer", rk_timer_init);
+CLOCKSOURCE_OF_DECLARE(rk3399_timer, "rockchip,rk3399-timer", rk_timer_init);

drivers/clocksource/samsung_pwm_timer.c

@@ -385,7 +385,7 @@ static int __init _samsung_pwm_clocksource_init(void)
 	mask = ~pwm.variant.output_mask & ((1 << SAMSUNG_PWM_NUM) - 1);
 	channel = fls(mask) - 1;
 	if (channel < 0) {
-		pr_crit("failed to find PWM channel for clocksource");
+		pr_crit("failed to find PWM channel for clocksource\n");
 		return -EINVAL;
 	}
 	pwm.source_id = channel;
@@ -393,7 +393,7 @@ static int __init _samsung_pwm_clocksource_init(void)
 	mask &= ~(1 << channel);
 	channel = fls(mask) - 1;
 	if (channel < 0) {
-		pr_crit("failed to find PWM channel for clock event");
+		pr_crit("failed to find PWM channel for clock event\n");
 		return -EINVAL;
 	}
 	pwm.event_id = channel;
@@ -448,7 +448,7 @@ static int __init samsung_pwm_alloc(struct device_node *np,
 
 	pwm.timerclk = of_clk_get_by_name(np, "timers");
 	if (IS_ERR(pwm.timerclk)) {
-		pr_crit("failed to get timers clock for timer");
+		pr_crit("failed to get timers clock for timer\n");
 		return PTR_ERR(pwm.timerclk);
 	}
 

drivers/clocksource/sun4i_timer.c

@@ -159,25 +159,25 @@ static int __init sun4i_timer_init(struct device_node *node)
 
 	timer_base = of_iomap(node, 0);
 	if (!timer_base) {
-		pr_crit("Can't map registers");
+		pr_crit("Can't map registers\n");
 		return -ENXIO;
 	}
 
 	irq = irq_of_parse_and_map(node, 0);
 	if (irq <= 0) {
-		pr_crit("Can't parse IRQ");
+		pr_crit("Can't parse IRQ\n");
 		return -EINVAL;
 	}
 
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk)) {
-		pr_crit("Can't get timer clock");
+		pr_crit("Can't get timer clock\n");
 		return PTR_ERR(clk);
 	}
 
 	ret = clk_prepare_enable(clk);
 	if (ret) {
-		pr_err("Failed to prepare clock");
+		pr_err("Failed to prepare clock\n");
 		return ret;
 	}
 
@@ -200,7 +200,7 @@ static int __init sun4i_timer_init(struct device_node *node)
 	ret = clocksource_mmio_init(timer_base + TIMER_CNTVAL_REG(1), node->name,
 				    rate, 350, 32, clocksource_mmio_readl_down);
 	if (ret) {
-		pr_err("Failed to register clocksource");
+		pr_err("Failed to register clocksource\n");
 		return ret;
 	}
 

drivers/clocksource/tegra20_timer.c

@@ -245,7 +245,7 @@ static int __init tegra20_init_rtc(struct device_node *np)
 
 	rtc_base = of_iomap(np, 0);
 	if (!rtc_base) {
-		pr_err("Can't map RTC registers");
+		pr_err("Can't map RTC registers\n");
 		return -ENXIO;
 	}
 

drivers/clocksource/time-armada-370-xp.c

@@ -247,13 +247,13 @@ static int __init armada_370_xp_timer_common_init(struct device_node *np)
 
 	timer_base = of_iomap(np, 0);
 	if (!timer_base) {
-		pr_err("Failed to iomap");
+		pr_err("Failed to iomap\n");
 		return -ENXIO;
 	}
 
 	local_base = of_iomap(np, 1);
 	if (!local_base) {
-		pr_err("Failed to iomap");
+		pr_err("Failed to iomap\n");
 		return -ENXIO;
 	}
 
@@ -298,7 +298,7 @@ static int __init armada_370_xp_timer_common_init(struct device_node *np)
 				    "armada_370_xp_clocksource",
 				    timer_clk, 300, 32, clocksource_mmio_readl_down);
 	if (res) {
-		pr_err("Failed to initialize clocksource mmio");
+		pr_err("Failed to initialize clocksource mmio\n");
 		return res;
 	}
 
@@ -315,7 +315,7 @@ static int __init armada_370_xp_timer_common_init(struct device_node *np)
 				armada_370_xp_evt);
 	/* Immediately configure the timer on the boot CPU */
 	if (res) {
-		pr_err("Failed to request percpu irq");
+		pr_err("Failed to request percpu irq\n");
 		return res;
 	}
 
@@ -324,7 +324,7 @@ static int __init armada_370_xp_timer_common_init(struct device_node *np)
 				armada_370_xp_timer_starting_cpu,
 				armada_370_xp_timer_dying_cpu);
 	if (res) {
-		pr_err("Failed to setup hotplug state and timer");
+		pr_err("Failed to setup hotplug state and timer\n");
 		return res;
 	}
 
@@ -339,7 +339,7 @@ static int __init armada_xp_timer_init(struct device_node *np)
 	int ret;
 
 	if (IS_ERR(clk)) {
-		pr_err("Failed to get clock");
+		pr_err("Failed to get clock\n");
 		return PTR_ERR(clk);
 	}
 
@@ -375,7 +375,7 @@ static int __init armada_375_timer_init(struct device_node *np)
 
 		/* Must have at least a clock */
 		if (IS_ERR(clk)) {
-			pr_err("Failed to get clock");
+			pr_err("Failed to get clock\n");
 			return PTR_ERR(clk);
 		}
 
@@ -399,7 +399,7 @@ static int __init armada_370_timer_init(struct device_node *np)
 
 	clk = of_clk_get(np, 0);
 	if (IS_ERR(clk)) {
-		pr_err("Failed to get clock");
+		pr_err("Failed to get clock\n");
 		return PTR_ERR(clk);
 	}
 

drivers/clocksource/time-efm32.c

@@ -235,7 +235,7 @@ static int __init efm32_clockevent_init(struct device_node *np)
 
 	ret = setup_irq(irq, &efm32_clock_event_irq);
 	if (ret) {
-		pr_err("Failed setup irq");
+		pr_err("Failed setup irq\n");
 		goto err_setup_irq;
 	}
 

drivers/clocksource/time-orion.c

@@ -15,6 +15,7 @@
 #include <linux/bitops.h>
 #include <linux/clk.h>
 #include <linux/clockchips.h>
+#include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -36,6 +37,21 @@
 
 static void __iomem *timer_base;
 
+static unsigned long notrace orion_read_timer(void)
+{
+	return ~readl(timer_base + TIMER0_VAL);
+}
+
+static struct delay_timer orion_delay_timer = {
+	.read_current_timer = orion_read_timer,
+};
+
+static void orion_delay_timer_init(unsigned long rate)
+{
+	orion_delay_timer.freq = rate;
+	register_current_timer_delay(&orion_delay_timer);
+}
+
 /*
  * Free-running clocksource handling.
  */
@@ -106,6 +122,7 @@ static struct irqaction orion_clkevt_irq = {
 
 static int __init orion_timer_init(struct device_node *np)
 {
+	unsigned long rate;
 	struct clk *clk;
 	int irq, ret;
 
@@ -124,7 +141,7 @@ static int __init orion_timer_init(struct device_node *np)
 
 	ret = clk_prepare_enable(clk);
 	if (ret) {
-		pr_err("Failed to prepare clock");
+		pr_err("Failed to prepare clock\n");
 		return ret;
 	}
 
@@ -135,6 +152,8 @@ static int __init orion_timer_init(struct device_node *np)
 		return -EINVAL;
 	}
 
+	rate = clk_get_rate(clk);
+
 	/* setup timer0 as free-running clocksource */
 	writel(~0, timer_base + TIMER0_VAL);
 	writel(~0, timer_base + TIMER0_RELOAD);
@@ -142,15 +161,15 @@ static int __init orion_timer_init(struct device_node *np)
 		TIMER0_RELOAD_EN | TIMER0_EN,
 		TIMER0_RELOAD_EN | TIMER0_EN);
 
-	ret = clocksource_mmio_init(timer_base + TIMER0_VAL, "orion_clocksource",
-				    clk_get_rate(clk), 300, 32,
+	ret = clocksource_mmio_init(timer_base + TIMER0_VAL,
+				    "orion_clocksource", rate, 300, 32,
 				    clocksource_mmio_readl_down);
 	if (ret) {
-		pr_err("Failed to initialize mmio timer");
+		pr_err("Failed to initialize mmio timer\n");
 		return ret;
 	}
 
-	sched_clock_register(orion_read_sched_clock, 32, clk_get_rate(clk));
+	sched_clock_register(orion_read_sched_clock, 32, rate);
 
 	/* setup timer1 as clockevent timer */
 	ret = setup_irq(irq, &orion_clkevt_irq);
@@ -162,9 +181,12 @@ static int __init orion_timer_init(struct device_node *np)
 	ticks_per_jiffy = (clk_get_rate(clk) + HZ/2) / HZ;
 	orion_clkevt.cpumask = cpumask_of(0);
 	orion_clkevt.irq = irq;
-	clockevents_config_and_register(&orion_clkevt, clk_get_rate(clk),
+	clockevents_config_and_register(&orion_clkevt, rate,
 					ORION_ONESHOT_MIN, ORION_ONESHOT_MAX);
 
+
+	orion_delay_timer_init(rate);
+
 	return 0;
 }
 CLOCKSOURCE_OF_DECLARE(orion_timer, "marvell,orion-timer", orion_timer_init);

drivers/clocksource/timer-atmel-pit.c

@@ -226,7 +226,7 @@ static int __init at91sam926x_pit_dt_init(struct device_node *node)
 	
 	ret = clocksource_register_hz(&data->clksrc, pit_rate);
 	if (ret) {
-		pr_err("Failed to register clocksource");
+		pr_err("Failed to register clocksource\n");
 		return ret;
 	}
 

drivers/clocksource/timer-digicolor.c

@@ -161,19 +161,19 @@ static int __init digicolor_timer_init(struct device_node *node)
 	 */
 	dc_timer_dev.base = of_iomap(node, 0);
 	if (!dc_timer_dev.base) {
-		pr_err("Can't map registers");
+		pr_err("Can't map registers\n");
 		return -ENXIO;
 	}
 
 	irq = irq_of_parse_and_map(node, dc_timer_dev.timer_id);
 	if (irq <= 0) {
-		pr_err("Can't parse IRQ");
+		pr_err("Can't parse IRQ\n");
 		return -EINVAL;
 	}
 
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk)) {
-		pr_err("Can't get timer clock");
+		pr_err("Can't get timer clock\n");
 		return PTR_ERR(clk);
 	}
 	clk_prepare_enable(clk);

drivers/clocksource/timer-gemini.c → drivers/clocksource/timer-fttmr010.c

 /*
- * Gemini timer driver
+ * Faraday Technology FTTMR010 timer driver
  * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
  *
  * Based on a rewrite of arch/arm/mach-gemini/timer.c:
@@ -16,17 +16,7 @@
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
 #include <linux/sched_clock.h>
-
-/*
- * Relevant registers in the global syscon
- */
-#define GLOBAL_STATUS		0x04
-#define CPU_AHB_RATIO_MASK	(0x3 << 18)
-#define CPU_AHB_1_1		(0x0 << 18)
-#define CPU_AHB_3_2		(0x1 << 18)
-#define CPU_AHB_24_13		(0x2 << 18)
-#define CPU_AHB_2_1		(0x3 << 18)
-#define REG_TO_AHB_SPEED(reg)	((((reg) >> 15) & 0x7) * 10 + 130)
+#include <linux/clk.h>
 
 /*
  * Register definitions for the timers
@@ -77,12 +67,12 @@
 static unsigned int tick_rate;
 static void __iomem *base;
 
-static u64 notrace gemini_read_sched_clock(void)
+static u64 notrace fttmr010_read_sched_clock(void)
 {
 	return readl(base + TIMER3_COUNT);
 }
 
-static int gemini_timer_set_next_event(unsigned long cycles,
+static int fttmr010_timer_set_next_event(unsigned long cycles,
 				       struct clock_event_device *evt)
 {
 	u32 cr;
@@ -96,7 +86,7 @@ static int gemini_timer_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static int gemini_timer_shutdown(struct clock_event_device *evt)
+static int fttmr010_timer_shutdown(struct clock_event_device *evt)
 {
 	u32 cr;
 
@@ -127,7 +117,7 @@ static int gemini_timer_shutdown(struct clock_event_device *evt)
 	return 0;
 }
 
-static int gemini_timer_set_periodic(struct clock_event_device *evt)
+static int fttmr010_timer_set_periodic(struct clock_event_device *evt)
 {
 	u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ);
 	u32 cr;
@@ -158,54 +148,40 @@ static int gemini_timer_set_periodic(struct clock_event_device *evt)
 }
 
 /* Use TIMER1 as clock event */
-static struct clock_event_device gemini_clockevent = {
+static struct clock_event_device fttmr010_clockevent = {
 	.name			= "TIMER1",
 	/* Reasonably fast and accurate clock event */
 	.rating			= 300,
 	.shift                  = 32,
 	.features		= CLOCK_EVT_FEAT_PERIODIC |
 				  CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event		= gemini_timer_set_next_event,
-	.set_state_shutdown	= gemini_timer_shutdown,
-	.set_state_periodic	= gemini_timer_set_periodic,
-	.set_state_oneshot	= gemini_timer_shutdown,
-	.tick_resume		= gemini_timer_shutdown,
+	.set_next_event		= fttmr010_timer_set_next_event,
+	.set_state_shutdown	= fttmr010_timer_shutdown,
+	.set_state_periodic	= fttmr010_timer_set_periodic,
+	.set_state_oneshot	= fttmr010_timer_shutdown,
+	.tick_resume		= fttmr010_timer_shutdown,
 };
 
 /*
  * IRQ handler for the timer
  */
-static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t fttmr010_timer_interrupt(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = &gemini_clockevent;
+	struct clock_event_device *evt = &fttmr010_clockevent;
 
 	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
-static struct irqaction gemini_timer_irq = {
-	.name		= "Gemini Timer Tick",
+static struct irqaction fttmr010_timer_irq = {
+	.name		= "Faraday FTTMR010 Timer Tick",
 	.flags		= IRQF_TIMER,
-	.handler	= gemini_timer_interrupt,
+	.handler	= fttmr010_timer_interrupt,
 };
 
-static int __init gemini_timer_of_init(struct device_node *np)
+static int __init fttmr010_timer_common_init(struct device_node *np)
 {
-	static struct regmap *map;
 	int irq;
-	int ret;
-	u32 val;
-
-	map = syscon_regmap_lookup_by_phandle(np, "syscon");
-	if (IS_ERR(map)) {
-		pr_err("Can't get regmap for syscon handle");
-		return -ENODEV;
-	}
-	ret = regmap_read(map, GLOBAL_STATUS, &val);
-	if (ret) {
-		pr_err("Can't read syscon status register");
-		return -ENXIO;
-	}
 
 	base = of_iomap(np, 0);
 	if (!base) {
@@ -219,26 +195,6 @@ static int __init gemini_timer_of_init(struct device_node *np)
 		return -EINVAL;
 	}
 
-	tick_rate = REG_TO_AHB_SPEED(val) * 1000000;
-	printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000);
-
-	tick_rate /= 6;		/* APB bus run AHB*(1/6) */
-
-	switch (val & CPU_AHB_RATIO_MASK) {
-	case CPU_AHB_1_1:
-		printk(KERN_CONT "(1/1)\n");
-		break;
-	case CPU_AHB_3_2:
-		printk(KERN_CONT "(3/2)\n");
-		break;
-	case CPU_AHB_24_13:
-		printk(KERN_CONT "(24/13)\n");
-		break;
-	case CPU_AHB_2_1:
-		printk(KERN_CONT "(2/1)\n");
-		break;
-	}
-
 	/*
 	 * Reset the interrupt mask and status
 	 */
@@ -255,9 +211,9 @@ static int __init gemini_timer_of_init(struct device_node *np)
 	writel(0, base + TIMER3_MATCH1);
 	writel(0, base + TIMER3_MATCH2);
 	clocksource_mmio_init(base + TIMER3_COUNT,
-			      "gemini_clocksource", tick_rate,
+			      "fttmr010_clocksource", tick_rate,
 			      300, 32, clocksource_mmio_readl_up);
-	sched_clock_register(gemini_read_sched_clock, 32, tick_rate);
+	sched_clock_register(fttmr010_read_sched_clock, 32, tick_rate);
 
 	/*
 	 * Setup clockevent timer (interrupt-driven.)
@@ -266,12 +222,82 @@ static int __init gemini_timer_of_init(struct device_node *np)
 	writel(0, base + TIMER1_LOAD);
 	writel(0, base + TIMER1_MATCH1);
 	writel(0, base + TIMER1_MATCH2);
-	setup_irq(irq, &gemini_timer_irq);
-	gemini_clockevent.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&gemini_clockevent, tick_rate,
+	setup_irq(irq, &fttmr010_timer_irq);
+	fttmr010_clockevent.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&fttmr010_clockevent, tick_rate,
 					1, 0xffffffff);
 
 	return 0;
 }
-CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "cortina,gemini-timer",
-		       gemini_timer_of_init);
+
+static int __init fttmr010_timer_of_init(struct device_node *np)
+{
+	/*
+	 * These implementations require a clock reference.
+	 * FIXME: we currently only support clocking using PCLK
+	 * and using EXTCLK is not supported in the driver.
+	 */
+	struct clk *clk;
+
+	clk = of_clk_get_by_name(np, "PCLK");
+	if (IS_ERR(clk)) {
+		pr_err("could not get PCLK");
+		return PTR_ERR(clk);
+	}
+	tick_rate = clk_get_rate(clk);
+
+	return fttmr010_timer_common_init(np);
+}
+CLOCKSOURCE_OF_DECLARE(fttmr010, "faraday,fttmr010", fttmr010_timer_of_init);
+
+/*
+ * Gemini-specific: relevant registers in the global syscon
+ */
+#define GLOBAL_STATUS		0x04
+#define CPU_AHB_RATIO_MASK	(0x3 << 18)
+#define CPU_AHB_1_1		(0x0 << 18)
+#define CPU_AHB_3_2		(0x1 << 18)
+#define CPU_AHB_24_13		(0x2 << 18)
+#define CPU_AHB_2_1		(0x3 << 18)
+#define REG_TO_AHB_SPEED(reg)	((((reg) >> 15) & 0x7) * 10 + 130)
+
+static int __init gemini_timer_of_init(struct device_node *np)
+{
+	static struct regmap *map;
+	int ret;
+	u32 val;
+
+	map = syscon_regmap_lookup_by_phandle(np, "syscon");
+	if (IS_ERR(map)) {
+		pr_err("Can't get regmap for syscon handle\n");
+		return -ENODEV;
+	}
+	ret = regmap_read(map, GLOBAL_STATUS, &val);
+	if (ret) {
+		pr_err("Can't read syscon status register\n");
+		return -ENXIO;
+	}
+
+	tick_rate = REG_TO_AHB_SPEED(val) * 1000000;
+	pr_info("Bus: %dMHz ", tick_rate / 1000000);
+
+	tick_rate /= 6;		/* APB bus run AHB*(1/6) */
+
+	switch (val & CPU_AHB_RATIO_MASK) {
+	case CPU_AHB_1_1:
+		pr_cont("(1/1)\n");
+		break;
+	case CPU_AHB_3_2:
+		pr_cont("(3/2)\n");
+		break;
+	case CPU_AHB_24_13:
+		pr_cont("(24/13)\n");
+		break;
+	case CPU_AHB_2_1:
+		pr_cont("(2/1)\n");
+		break;
+	}
+
+	return fttmr010_timer_common_init(np);
+}
+CLOCKSOURCE_OF_DECLARE(gemini, "cortina,gemini-timer", gemini_timer_of_init);

drivers/clocksource/timer-integrator-ap.c

@@ -200,7 +200,7 @@ static int __init integrator_ap_timer_init_of(struct device_node *node)
 	err = of_property_read_string(of_aliases,
 				"arm,timer-primary", &path);
 	if (err) {
-		pr_warn("Failed to read property");
+		pr_warn("Failed to read property\n");
 		return err;
 	}
 
@@ -209,7 +209,7 @@ static int __init integrator_ap_timer_init_of(struct device_node *node)
 	err = of_property_read_string(of_aliases,
 				"arm,timer-secondary", &path);
 	if (err) {
-		pr_warn("Failed to read property");		
+		pr_warn("Failed to read property\n");
 		return err;
 	}
 

drivers/clocksource/timer-nps.c

@@ -55,7 +55,7 @@ static int __init nps_get_timer_clk(struct device_node *node,
 	*clk = of_clk_get(node, 0);
 	ret = PTR_ERR_OR_ZERO(*clk);
 	if (ret) {
-		pr_err("timer missing clk");
+		pr_err("timer missing clk\n");
 		return ret;
 	}
 
@@ -247,7 +247,7 @@ static int __init nps_setup_clockevent(struct device_node *node)
 
 	nps_timer0_irq = irq_of_parse_and_map(node, 0);
 	if (nps_timer0_irq <= 0) {
-		pr_err("clockevent: missing irq");
+		pr_err("clockevent: missing irq\n");
 		return -EINVAL;
 	}
 
@@ -270,7 +270,7 @@ static int __init nps_setup_clockevent(struct device_node *node)
 				nps_timer_starting_cpu,
 				nps_timer_dying_cpu);
 	if (ret) {
-		pr_err("Failed to setup hotplug state");
+		pr_err("Failed to setup hotplug state\n");
 		clk_disable_unprepare(clk);
 		free_percpu_irq(nps_timer0_irq, &nps_clockevent_device);
 		return ret;

drivers/clocksource/timer-prima2.c

@@ -196,20 +196,20 @@ static int __init sirfsoc_prima2_timer_init(struct device_node *np)
 
 	clk = of_clk_get(np, 0);
 	if (IS_ERR(clk)) {
-		pr_err("Failed to get clock");
+		pr_err("Failed to get clock\n");
 		return PTR_ERR(clk);
 	}
 
 	ret = clk_prepare_enable(clk);
 	if (ret) {
-		pr_err("Failed to enable clock");
+		pr_err("Failed to enable clock\n");
 		return ret;
 	}
 
 	rate = clk_get_rate(clk);
 
 	if (rate < PRIMA2_CLOCK_FREQ || rate % PRIMA2_CLOCK_FREQ) {
-		pr_err("Invalid clock rate");
+		pr_err("Invalid clock rate\n");
 		return -EINVAL;
 	}
 
@@ -229,7 +229,7 @@ static int __init sirfsoc_prima2_timer_init(struct device_node *np)
 
 	ret = clocksource_register_hz(&sirfsoc_clocksource, PRIMA2_CLOCK_FREQ);
 	if (ret) {
-		pr_err("Failed to register clocksource");
+		pr_err("Failed to register clocksource\n");
 		return ret;
 	}
 
@@ -237,7 +237,7 @@ static int __init sirfsoc_prima2_timer_init(struct device_node *np)
 
 	ret = setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq);
 	if (ret) {
-		pr_err("Failed to setup irq");
+		pr_err("Failed to setup irq\n");
 		return ret;
 	}
 

drivers/clocksource/timer-sp804.c

@@ -299,13 +299,13 @@ static int __init integrator_cp_of_init(struct device_node *np)
 
 	base = of_iomap(np, 0);
 	if (!base) {
-		pr_err("Failed to iomap");
+		pr_err("Failed to iomap\n");
 		return -ENXIO;
 	}
 
 	clk = of_clk_get(np, 0);
 	if (IS_ERR(clk)) {
-		pr_err("Failed to get clock");
+		pr_err("Failed to get clock\n");
 		return PTR_ERR(clk);
 	}
 

drivers/clocksource/timer-sun5i.c

@@ -332,19 +332,19 @@ static int __init sun5i_timer_init(struct device_node *node)
 
 	timer_base = of_io_request_and_map(node, 0, of_node_full_name(node));
 	if (IS_ERR(timer_base)) {
-		pr_err("Can't map registers");
+		pr_err("Can't map registers\n");
 		return PTR_ERR(timer_base);;
 	}
 
 	irq = irq_of_parse_and_map(node, 0);
 	if (irq <= 0) {
-		pr_err("Can't parse IRQ");
+		pr_err("Can't parse IRQ\n");
 		return -EINVAL;
 	}
 
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk)) {
-		pr_err("Can't get timer clock");
+		pr_err("Can't get timer clock\n");
 		return PTR_ERR(clk);
 	}
 

drivers/clocksource/vf_pit_timer.c

@@ -165,7 +165,7 @@ static int __init pit_timer_init(struct device_node *np)
 
 	timer_base = of_iomap(np, 0);
 	if (!timer_base) {
-		pr_err("Failed to iomap");
+		pr_err("Failed to iomap\n");
 		return -ENXIO;
 	}