Input: cyapa - use 'error' for error codes

Let's use 'error' variable instead of 'ret' when we need to store erro
codes.
Signed-off-by: Dudley Du <dudley.dulixin@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

drivers/input/mouse/cyapa.c

@@ -6,7 +6,7 @@
  *   Daniel Kurtz <djkurtz@chromium.org>
  *   Benson Leung <bleung@chromium.org>
  *
- * Copyright (C) 2011-2012 Cypress Semiconductor, Inc.
+ * Copyright (C) 2011-2014 Cypress Semiconductor, Inc.
  * Copyright (C) 2011-2012 Google, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -421,8 +421,8 @@ static ssize_t cyapa_read_block(struct cyapa *cyapa, u8 cmd_idx, u8 *values)
  */
 static int cyapa_get_state(struct cyapa *cyapa)
 {
-	int ret;
 	u8 status[BL_STATUS_SIZE];
+	int error;
 
 	cyapa->state = CYAPA_STATE_NO_DEVICE;
 
@@ -432,18 +432,18 @@ static int cyapa_get_state(struct cyapa *cyapa)
 	 * If the device is in operation mode, this will be the DATA regs.
 	 *
 	 */
-	ret = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET, BL_STATUS_SIZE,
-				       status);
+	error = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET, BL_STATUS_SIZE,
+				         status);
 
 	/*
 	 * On smbus systems in OP mode, the i2c_reg_read will fail with
 	 * -ETIMEDOUT.  In this case, try again using the smbus equivalent
 	 * command.  This should return a BL_HEAD indicating CYAPA_STATE_OP.
 	 */
-	if (cyapa->smbus && (ret == -ETIMEDOUT || ret == -ENXIO))
-		ret = cyapa_read_block(cyapa, CYAPA_CMD_BL_STATUS, status);
+	if (cyapa->smbus && (error == -ETIMEDOUT || error == -ENXIO))
+		error = cyapa_read_block(cyapa, CYAPA_CMD_BL_STATUS, status);
 
-	if (ret != BL_STATUS_SIZE)
+	if (error != BL_STATUS_SIZE)
 		goto error;
 
 	if ((status[REG_OP_STATUS] & OP_STATUS_SRC) == OP_STATUS_SRC) {
@@ -453,7 +453,7 @@ static int cyapa_get_state(struct cyapa *cyapa)
 			cyapa->state = CYAPA_STATE_OP;
 			break;
 		default:
-			ret = -EAGAIN;
+			error = -EAGAIN;
 			goto error;
 		}
 	} else {
@@ -467,7 +467,7 @@ static int cyapa_get_state(struct cyapa *cyapa)
 
 	return 0;
 error:
-	return (ret < 0) ? ret : -EAGAIN;
+	return (error < 0) ? error : -EAGAIN;
 }
 
 /*
@@ -486,31 +486,31 @@ static int cyapa_get_state(struct cyapa *cyapa)
  */
 static int cyapa_poll_state(struct cyapa *cyapa, unsigned int timeout)
 {
-	int ret;
+	int error;
 	int tries = timeout / 100;
 
-	ret = cyapa_get_state(cyapa);
-	while ((ret || cyapa->state >= CYAPA_STATE_BL_BUSY) && tries--) {
+	error = cyapa_get_state(cyapa);
+	while ((error || cyapa->state >= CYAPA_STATE_BL_BUSY) && tries--) {
 		msleep(100);
-		ret = cyapa_get_state(cyapa);
+		error = cyapa_get_state(cyapa);
 	}
-	return (ret == -EAGAIN || ret == -ETIMEDOUT) ? -ETIMEDOUT : ret;
+	return (error == -EAGAIN || error == -ETIMEDOUT) ? -ETIMEDOUT : error;
 }
 
 static int cyapa_bl_deactivate(struct cyapa *cyapa)
 {
-	int ret;
+	int error;
 
-	ret = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_deactivate),
-					bl_deactivate);
-	if (ret < 0)
-		return ret;
+	error = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_deactivate),
+					  bl_deactivate);
+	if (error)
+		return error;
 
 	/* wait for bootloader to switch to idle state; should take < 100ms */
 	msleep(100);
-	ret = cyapa_poll_state(cyapa, 500);
-	if (ret < 0)
-		return ret;
+	error = cyapa_poll_state(cyapa, 500);
+	if (error)
+		return error;
 	if (cyapa->state != CYAPA_STATE_BL_IDLE)
 		return -EAGAIN;
 	return 0;
@@ -531,11 +531,11 @@ static int cyapa_bl_deactivate(struct cyapa *cyapa)
  */
 static int cyapa_bl_exit(struct cyapa *cyapa)
 {
-	int ret;
+	int error;
 
-	ret = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_exit), bl_exit);
-	if (ret < 0)
-		return ret;
+	error = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_exit), bl_exit);
+	if (error)
+		return error;
 
 	/*
 	 * Wait for bootloader to exit, and operation mode to start.
@@ -547,9 +547,9 @@ static int cyapa_bl_exit(struct cyapa *cyapa)
 	 * updated to new firmware, it must first calibrate its sensors, which
 	 * can take up to an additional 2 seconds.
 	 */
-	ret = cyapa_poll_state(cyapa, 2000);
-	if (ret < 0)
-		return ret;
+	error = cyapa_poll_state(cyapa, 2000);
+	if (error < 0)
+		return error;
 	if (cyapa->state != CYAPA_STATE_OP)
 		return -EAGAIN;
 
@@ -639,28 +639,28 @@ static int cyapa_check_is_operational(struct cyapa *cyapa)
 {
 	struct device *dev = &cyapa->client->dev;
 	static const char unique_str[] = "CYTRA";
-	int ret;
+	int error;
 
-	ret = cyapa_poll_state(cyapa, 2000);
-	if (ret < 0)
-		return ret;
+	error = cyapa_poll_state(cyapa, 2000);
+	if (error)
+		return error;
 	switch (cyapa->state) {
 	case CYAPA_STATE_BL_ACTIVE:
-		ret = cyapa_bl_deactivate(cyapa);
-		if (ret)
-			return ret;
+		error = cyapa_bl_deactivate(cyapa);
+		if (error)
+			return error;
 
 	/* Fallthrough state */
 	case CYAPA_STATE_BL_IDLE:
-		ret = cyapa_bl_exit(cyapa);
-		if (ret)
-			return ret;
+		error = cyapa_bl_exit(cyapa);
+		if (error)
+			return error;
 
 	/* Fallthrough state */
 	case CYAPA_STATE_OP:
-		ret = cyapa_get_query_data(cyapa);
-		if (ret < 0)
-			return ret;
+		error = cyapa_get_query_data(cyapa);
+		if (error)
+			return error;
 
 		/* only support firmware protocol gen3 */
 		if (cyapa->gen != CYAPA_GEN3) {
@@ -790,7 +790,7 @@ static int cyapa_create_input_dev(struct cyapa *cyapa)
 
 	input = devm_input_allocate_device(dev);
 	if (!input) {
-		dev_err(dev, "allocate memory for input device failed\n");
+		dev_err(dev, "failed to allocate memory for input device.\n");
 		return -ENOMEM;
 	}
 
@@ -798,7 +798,7 @@ static int cyapa_create_input_dev(struct cyapa *cyapa)
 	input->phys = cyapa->phys;
 	input->id.bustype = BUS_I2C;
 	input->id.version = 1;
-	input->id.product = 0;  /* means any product in eventcomm. */
+	input->id.product = 0;  /* Means any product in eventcomm. */
 	input->dev.parent = &cyapa->client->dev;
 
 	input->open = cyapa_open;
@@ -808,7 +808,7 @@ static int cyapa_create_input_dev(struct cyapa *cyapa)
 
 	__set_bit(EV_ABS, input->evbit);
 
-	/* finger position */
+	/* Finger position */
 	input_set_abs_params(input, ABS_MT_POSITION_X, 0, cyapa->max_abs_x, 0,
 			     0);
 	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, cyapa->max_abs_y, 0,
@@ -830,7 +830,7 @@ static int cyapa_create_input_dev(struct cyapa *cyapa)
 	if (cyapa->btn_capability == CAPABILITY_LEFT_BTN_MASK)
 		__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
 
-	/* handle pointer emulation and unused slots in core */
+	/* Handle pointer emulation and unused slots in core */
 	error = input_mt_init_slots(input, CYAPA_MAX_MT_SLOTS,
 				    INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED);
 	if (error) {
@@ -894,7 +894,7 @@ static int cyapa_probe(struct i2c_client *client,
 					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 					  "cyapa", cyapa);
 	if (error) {
-		dev_err(dev, "IRQ request failed: %d\n, ", error);
+		dev_err(dev, "failed to request threaded irq: %d\n", error);
 		return error;
 	}