Commit 828aac2e authored by Russell King's avatar Russell King Committed by Russell King

Merge branch 'for-rmk' of git://git.pengutronix.de/git/ukl/linux-2.6 into devel

parents 6fd7c7fe 7971db5a
......@@ -156,7 +156,6 @@ config ARCH_MTD_XIP
bool
config GENERIC_HARDIRQS_NO__DO_IRQ
bool
def_bool y
if OPROFILE
......@@ -288,6 +287,8 @@ config ARCH_NETX
bool "Hilscher NetX based"
select CPU_ARM926T
select ARM_VIC
select GENERIC_CLOCKEVENTS
select GENERIC_TIME
help
This enables support for systems based on the Hilscher NetX Soc
......
......@@ -728,9 +728,9 @@ CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
#
# RTC drivers
......
......@@ -1069,9 +1069,9 @@ CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
......
......@@ -95,7 +95,7 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
return ret;
}
/* run from kstop_machine */
/* run from ftrace_init with irqs disabled */
int __init ftrace_dyn_arch_init(void *data)
{
ftrace_mcount_set(data);
......
......@@ -141,6 +141,15 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
/* Use "raw" primitives so we behave correctly on RT kernels. */
raw_local_irq_save(flags);
/*
* According to Thomas Gleixner irqs are already disabled here. Simply
* removing raw_local_irq_save above (and the matching
* raw_local_irq_restore) was not accepted. See
* http://thread.gmane.org/gmane.linux.ports.arm.kernel/41174
* So for now (2008-11-20) just warn once if irqs were not disabled ...
*/
WARN_ON_ONCE(!raw_irqs_disabled_flags(flags));
/* The alarm IRQ uses absolute time (now+delta), not the relative
* time (delta) in our calling convention. Like all clockevents
* using such "match" hardware, we have a race to defend against.
......
......@@ -328,6 +328,28 @@
#define NETX_PFIFO_FILL_LEVEL(pfifo) NETX_PFIFO_REG(0x180 + ((pfifo)<<2))
#define NETX_PFIFO_XPEC_ISR(xpec) NETX_PFIFO_REG(0x400 + ((xpec) << 2))
/*******************************
* Memory Controller *
*******************************/
/* Registers */
#define NETX_MEMCR_REG(ofs) __io(NETX_VA_MEMCR + (ofs))
#define NETX_MEMCR_SRAM_CTRL(cs) NETX_MEMCR_REG(0x0 + 4 * (cs)) /* SRAM for CS 0..2 */
#define NETX_MEMCR_SDRAM_CFG_CTRL NETX_MEMCR_REG(0x40)
#define NETX_MEMCR_SDRAM_TIMING_CTRL NETX_MEMCR_REG(0x44)
#define NETX_MEMCR_SDRAM_MODE NETX_MEMCR_REG(0x48)
#define NETX_MEMCR_SDRAM_EXT_MODE NETX_MEMCR_REG(0x4c)
#define NETX_MEMCR_PRIO_TIMESLOT_CTRL NETX_MEMCR_REG(0x80)
#define NETX_MEMCR_PRIO_ACCESS_CTRL NETX_MEMCR_REG(0x84)
/* Bits */
#define NETX_MEMCR_SRAM_CTRL_WIDTHEXTMEM(x) (((x) & 0x3) << 24)
#define NETX_MEMCR_SRAM_CTRL_WSPOSTPAUSEEXTMEM(x) (((x) & 0x3) << 16)
#define NETX_MEMCR_SRAM_CTRL_WSPREPASEEXTMEM(x) (((x) & 0x3) << 8)
#define NETX_MEMCR_SRAM_CTRL_WSEXTMEM(x) (((x) & 0x1f) << 0)
/*******************************
* Dual Port Memory *
*******************************/
......
......@@ -21,43 +21,100 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/time.h>
#include <mach/netx-regs.h>
#define TIMER_CLOCKEVENT 0
#define TIMER_CLOCKSOURCE 1
static void netx_set_mode(enum clock_event_mode mode,
struct clock_event_device *clk)
{
u32 tmode;
/* disable timer */
writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
writel(LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
tmode = NETX_GPIO_COUNTER_CTRL_RST_EN |
NETX_GPIO_COUNTER_CTRL_IRQ_EN |
NETX_GPIO_COUNTER_CTRL_RUN;
break;
case CLOCK_EVT_MODE_ONESHOT:
writel(0, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
tmode = NETX_GPIO_COUNTER_CTRL_IRQ_EN |
NETX_GPIO_COUNTER_CTRL_RUN;
break;
default:
WARN(1, "%s: unhandled mode %d\n", __func__, mode);
/* fall through */
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_RESUME:
tmode = 0;
break;
}
writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
}
static int netx_set_next_event(unsigned long evt,
struct clock_event_device *clk)
{
writel(0 - evt, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKEVENT));
return 0;
}
static struct clock_event_device netx_clockevent = {
.name = "netx-timer" __stringify(TIMER_CLOCKEVENT),
.shift = 32,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = netx_set_next_event,
.set_mode = netx_set_mode,
};
/*
* IRQ handler for the timer
*/
static irqreturn_t
netx_timer_interrupt(int irq, void *dev_id)
{
timer_tick();
struct clock_event_device *evt = &netx_clockevent;
/* acknowledge interrupt */
writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct irqaction netx_timer_irq = {
.name = "NetX Timer Tick",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = netx_timer_interrupt,
.name = "NetX Timer Tick",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = netx_timer_interrupt,
};
cycle_t netx_get_cycles(void)
{
return readl(NETX_GPIO_COUNTER_CURRENT(1));
return readl(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
}
static struct clocksource clocksource_netx = {
.name = "netx_timer",
.name = "netx_timer",
.rating = 200,
.read = netx_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
.shift = 20,
.shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
......@@ -77,24 +134,37 @@ static void __init netx_timer_init(void)
/* acknowledge interrupt */
writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
/* Enable the interrupt in the specific timer register and start timer */
/* Enable the interrupt in the specific timer
* register and start timer
*/
writel(COUNTER_BIT(0), NETX_GPIO_IRQ_ENABLE);
writel(NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN,
NETX_GPIO_COUNTER_CTRL(0));
NETX_GPIO_COUNTER_CTRL(0));
setup_irq(NETX_IRQ_TIMER0, &netx_timer_irq);
/* Setup timer one for clocksource */
writel(0, NETX_GPIO_COUNTER_CTRL(1));
writel(0, NETX_GPIO_COUNTER_CURRENT(1));
writel(0xFFFFFFFF, NETX_GPIO_COUNTER_MAX(1));
writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
writel(0, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
writel(0xffffffff, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKSOURCE));
writel(NETX_GPIO_COUNTER_CTRL_RUN,
NETX_GPIO_COUNTER_CTRL(1));
writel(NETX_GPIO_COUNTER_CTRL_RUN,
NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
clocksource_netx.mult =
clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_netx.shift);
clocksource_register(&clocksource_netx);
netx_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
netx_clockevent.shift);
netx_clockevent.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &netx_clockevent);
/* with max_delta_ns >= delta2ns(0x800) the system currently runs fine.
* Adding some safety ... */
netx_clockevent.min_delta_ns =
clockevent_delta2ns(0xa00, &netx_clockevent);
netx_clockevent.cpumask = cpumask_of_cpu(0);
clockevents_register_device(&netx_clockevent);
}
struct sys_timer netx_timer = {
......
......@@ -92,10 +92,10 @@ static int xc_check_ptr(struct xc *x, unsigned long adr, unsigned int size)
return -1;
}
static int xc_patch(struct xc *x, void *patch, int count)
static int xc_patch(struct xc *x, const void *patch, int count)
{
unsigned int val, adr;
unsigned int *data = patch;
const unsigned int *data = patch;
int i;
for (i = 0; i < count; i++) {
......@@ -117,7 +117,7 @@ int xc_request_firmware(struct xc *x)
struct fw_header *head;
unsigned int size;
int i;
void *src;
const void *src;
unsigned long dst;
sprintf(name, "xc%d.bin", x->no);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment