Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

Pull m68knommu fixes from Greg Ungerer:
 "Just a small collection of cleanups and fixes this time, no big
  changes.  The most interresting are to make the m68k and m68knommu
  consistently use CONFIG_IOMAP, clean out some unused board config
  options and flush the cache on signal stack creation"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: remove 16 unused boards in Kconfig.machine
  m68k: define 'VM_DATA_DEFAULT_FLAGS' no matter whether has 'NOMMU' or not
  m68knommu: user generic iomap to support ioread*/iowrite*
  m68k/coldfire: flush cache when creating the signal stack frame
  m68knommu: Mark functions only called from setup_arch() __init

arch/m68k/Kconfig

@@ -11,6 +11,7 @@ config M68K
 	select VIRT_TO_BUS
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
 	select GENERIC_CPU_DEVICES
+	select GENERIC_IOMAP
 	select GENERIC_STRNCPY_FROM_USER if MMU
 	select GENERIC_STRNLEN_USER if MMU
 	select FPU if MMU
@@ -72,7 +73,6 @@ source "kernel/Kconfig.freezer"
 config MMU
 	bool "MMU-based Paged Memory Management Support"
 	default y
-	select GENERIC_IOMAP
 	help
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.

arch/m68k/Kconfig.machine

@@ -150,18 +150,6 @@ config XCOPILOT_BUGS
 	help
 	  Support the bugs of Xcopilot.
 
-config UC5272
-	bool "Arcturus Networks uC5272 dimm board support"
-	depends on M5272
-	help
-	  Support for the Arcturus Networks uC5272 dimm board.
-
-config UC5282
-	bool "Arcturus Networks uC5282 board support"
-	depends on M528x
-	help
-	  Support for the Arcturus Networks uC5282 dimm board.
-
 config UCSIMM
 	bool "uCsimm module support"
 	depends on M68EZ328
@@ -205,23 +193,15 @@ config UCQUICC
 	help
 	  Support for the Lineo uCquicc board.
 
-config ARNEWSH
-	bool
-
 config ARN5206
 	bool "Arnewsh 5206 board support"
 	depends on M5206
-	select ARNEWSH
 	help
 	  Support for the Arnewsh 5206 board.
 
-config FREESCALE
-	bool
-
 config M5206eC3
 	bool "Motorola M5206eC3 board support"
 	depends on M5206e
-	select FREESCALE
 	help
 	  Support for the Motorola M5206eC3 board.
 
@@ -231,88 +211,24 @@ config ELITE
 	help
 	  Support for the Motorola M5206eLITE board.
 
-config M5208EVB
-	bool "Freescale M5208EVB board support"
-	depends on M520x
-	select FREESCALE
-	help
-	  Support for the Freescale Coldfire M5208EVB.
-
 config M5235EVB
 	bool "Freescale M5235EVB support"
 	depends on M523x
-	select FREESCALE
 	help
 	  Support for the Freescale M5235EVB board.
 
 config M5249C3
 	bool "Motorola M5249C3 board support"
 	depends on M5249
-	select FREESCALE
 	help
 	  Support for the Motorola M5249C3 board.
 
-config M5271EVB
-	bool "Freescale (Motorola) M5271EVB board support"
-	depends on M5271
-	select FREESCALE
-	help
-	  Support for the Freescale (Motorola) M5271EVB board.
-
-config M5275EVB
-	bool "Freescale (Motorola) M5275EVB board support"
-	depends on M5275
-	select FREESCALE
-	help
-	  Support for the Freescale (Motorola) M5275EVB board.
-
 config M5272C3
 	bool "Motorola M5272C3 board support"
 	depends on M5272
-	select FREESCALE
 	help
 	  Support for the Motorola M5272C3 board.
 
-config senTec
-	bool
-
-config COBRA5272
-	bool "senTec COBRA5272 board support"
-	depends on M5272
-	select senTec
-	help
-	  Support for the senTec COBRA5272 board.
-
-config AVNET
-	bool
-
-config AVNET5282
-	bool "Avnet 5282 board support"
-	depends on M528x
-	select AVNET
-	help
-	  Support for the Avnet 5282 board.
-
-config M5282EVB
-	bool "Motorola M5282EVB board support"
-	depends on M528x
-	select FREESCALE
-	help
-	  Support for the Motorola M5282EVB board.
-
-config COBRA5282
-	bool "senTec COBRA5282 board support"
-	depends on M528x
-	select senTec
-	help
-	  Support for the senTec COBRA5282 board.
-
-config SOM5282EM
-	bool "EMAC.Inc SOM5282EM board support"
-	depends on M528x
-	help
-	  Support for the EMAC.Inc SOM5282EM module.
-
 config WILDFIRE
 	bool "Intec Automation Inc. WildFire board support"
 	depends on M528x
@@ -328,14 +244,12 @@ config WILDFIREMOD
 config ARN5307
 	bool "Arnewsh 5307 board support"
 	depends on M5307
-	select ARNEWSH
 	help
 	  Support for the Arnewsh 5307 board.
 
 config M5307C3
 	bool "Motorola M5307C3 board support"
 	depends on M5307
-	select FREESCALE
 	help
 	  Support for the Motorola M5307C3 board.
 
@@ -345,30 +259,9 @@ config SECUREEDGEMP3
 	help
 	  Support for the SnapGear SecureEdge/MP3 platform.
 
-config M5329EVB
-	bool "Freescale (Motorola) M5329EVB board support"
-	depends on M532x
-	select FREESCALE
-	help
-	  Support for the Freescale (Motorola) M5329EVB board.
-
-config COBRA5329
-	bool "senTec COBRA5329 board support"
-	depends on M532x
-	help
-	  Support for the senTec COBRA5329 board.
-
-config M5373EVB
-	bool "Freescale M5373EVB board support"
-	depends on M537x
-	select FREESCALE
-	help
-	  Support for the Freescale M5373EVB board.
-
 config M5407C3
 	bool "Motorola M5407C3 board support"
 	depends on M5407
-	select FREESCALE
 	help
 	  Support for the Motorola M5407C3 board.
 
@@ -402,39 +295,12 @@ config NETtel
 	help
 	  Support for the SnapGear NETtel/SecureEdge/SnapGear boards.
 
-config SNAPGEAR
-	bool "SnapGear router board support"
-	depends on NETtel
-	help
-	  Special additional support for SnapGear router boards.
-
-config SNEHA
-	bool
-
-config CPU16B
-	bool "Sneha Technologies S.L. Sarasvati board support"
-	depends on M5272
-	select SNEHA
-	help
-	  Support for the SNEHA CPU16B board.
-
 config MOD5272
 	bool "Netburner MOD-5272 board support"
 	depends on M5272
 	help
 	  Support for the Netburner MOD-5272 board.
 
-config SAVANT
-	bool
-
-config SAVANTrosie1
-	bool "Savant Rosie1 board support"
-	depends on M523x
-	select SAVANT
-	help
-	  Support for the Savant Rosie1 board.
-
-
 if !MMU || COLDFIRE
 
 comment "Machine Options"

arch/m68k/include/asm/io_no.h

@@ -4,6 +4,7 @@
 #ifdef __KERNEL__
 
 #include <asm/virtconvert.h>
+#include <asm-generic/iomap.h>
 
 /*
  * These are for ISA/PCI shared memory _only_ and should never be used

arch/m68k/include/asm/page.h

@@ -48,6 +48,9 @@ extern unsigned long _ramend;
 #include <asm/page_no.h>
 #endif
 
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
 #include <asm-generic/getorder.h>
 
 #endif /* _M68K_PAGE_H */

arch/m68k/include/asm/page_mm.h

@@ -173,7 +173,4 @@ static inline __attribute_const__ int __virt_to_node_shift(void)
 
 #endif /* __ASSEMBLY__ */
 
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
 #endif /* _M68K_PAGE_MM_H */

arch/m68k/kernel/setup_no.c

@@ -118,7 +118,7 @@ void (*mach_power_off)(void);
  *
  * Returns:
  */
-void parse_uboot_commandline(char *commandp, int size)
+static void __init parse_uboot_commandline(char *commandp, int size)
 {
 	extern unsigned long _init_sp;
 	unsigned long *sp;

arch/m68k/kernel/signal.c

@@ -50,6 +50,7 @@
 #include <asm/pgtable.h>
 #include <asm/traps.h>
 #include <asm/ucontext.h>
+#include <asm/cacheflush.h>
 
 #ifdef CONFIG_MMU
 
@@ -181,6 +182,13 @@ static inline void push_cache (unsigned long vaddr)
 		asm volatile ("movec %0,%%caar\n\t"
 			      "movec %1,%%cacr"
 			      : : "r" (vaddr + 4), "r" (temp));
+	} else {
+		/* CPU_IS_COLDFIRE */
+#if defined(CONFIG_CACHE_COPYBACK)
+		flush_cf_dcache(0, DCACHE_MAX_ADDR);
+#endif
+		/* Invalidate instruction cache for the pushed bytes */
+		clear_cf_icache(vaddr, vaddr + 8);
 	}
 }
 

arch/m68k/platform/68000/m68328.c

@@ -15,6 +15,7 @@
 
 /***************************************************************************/
 
+#include <linux/init.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/rtc.h>
@@ -42,7 +43,7 @@ void m68328_reset (void)
 
 /***************************************************************************/
 
-void config_BSP(char *command, int len)
+void __init config_BSP(char *command, int len)
 {
   printk(KERN_INFO "\n68328 support D. Jeff Dionne <jeff@uclinux.org>\n");
   printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@kjshds.com>\n");

arch/m68k/platform/68000/m68EZ328.c

@@ -13,6 +13,7 @@
 
 /***************************************************************************/
 
+#include <linux/init.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/rtc.h>
@@ -52,7 +53,7 @@ _bsc1(unsigned char *, gethwaddr, int, a)
 _bsc1(char *, getbenv, char *, a)
 #endif
 
-void config_BSP(char *command, int len)
+void __init config_BSP(char *command, int len)
 {
   unsigned char *p;
 

arch/m68k/platform/68000/m68VZ328.c

@@ -14,6 +14,7 @@
 
 /***************************************************************************/
 
+#include <linux/init.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/kd.h>
@@ -59,7 +60,7 @@ static void m68vz328_reset(void)
 	);
 }
 
-static void init_hardware(char *command, int size)
+static void __init init_hardware(char *command, int size)
 {
 #ifdef CONFIG_DIRECT_IO_ACCESS
 	SCR = 0x10;					/* allow user access to internal registers */
@@ -145,7 +146,7 @@ _bsc0(char *, getserialnum)
 _bsc1(unsigned char *, gethwaddr, int, a)
 _bsc1(char *, getbenv, char *, a)
 
-static void init_hardware(char *command, int size)
+static void __init init_hardware(char *command, int size)
 {
 	char *p;
 
@@ -167,7 +168,7 @@ static void m68vz328_reset(void)
 {
 }
 
-static void init_hardware(char *command, int size)
+static void __init init_hardware(char *command, int size)
 {
 }
 
@@ -175,7 +176,7 @@ static void init_hardware(char *command, int size)
 #endif
 /***************************************************************************/
 
-void config_BSP(char *command, int size)
+void __init config_BSP(char *command, int size)
 {
 	printk(KERN_INFO "68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
 

arch/m68k/platform/68360/commproc.c

@@ -31,6 +31,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/param.h>
@@ -77,7 +78,7 @@ void m360_cpm_reset(void);
 
 
 
-void m360_cpm_reset()
+void __init m360_cpm_reset()
 {
 /* 	pte_t		   *pte; */
 

arch/m68k/platform/68360/config.c

@@ -11,6 +11,7 @@
  */
 
 #include <stdarg.h>
+#include <linux/init.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
@@ -140,7 +141,7 @@ _bsc1(char *, getbenv, char *, a)
 #endif
 
 
-void config_BSP(char *command, int len)
+void __init config_BSP(char *command, int len)
 {
   unsigned char *p;