at86rf230: set cca_modes supported flags

This patch sets the at86rf230 supported cca modes. In case of at86rf212
it also can support listen before transmit.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

drivers/net/ieee802154/at86rf230.c

@@ -1574,6 +1574,11 @@ at86rf230_detect_device(struct at86rf230_local *lp)
 			     WPAN_PHY_FLAG_CCA_ED_LEVEL |
 			     WPAN_PHY_FLAG_CCA_MODE;
 
+	lp->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
+		BIT(NL802154_CCA_CARRIER) | BIT(NL802154_CCA_ENERGY_CARRIER);
+	lp->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
+		BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
+
 	lp->hw->phy->cca.mode = NL802154_CCA_ENERGY;
 
 	switch (part) {
@@ -1596,6 +1601,7 @@ at86rf230_detect_device(struct at86rf230_local *lp)
 		lp->hw->phy->supported.channels[2] = 0x00007FF;
 		lp->hw->phy->current_channel = 5;
 		lp->hw->phy->symbol_duration = 25;
+		lp->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH;
 		break;
 	case 11:
 		chip = "at86rf233";