Commit 839a8d77 authored by Olof Johansson's avatar Olof Johansson

Merge tag 'mxs-dt-3.7' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

- Remove all board files and make mach-mxs a DT-only platform
- Some dts file formatting and style fixing
- DTS update for additional boards and devices

* tag 'mxs-dt-3.7' of git://git.linaro.org/people/shawnguo/linux-2.6: (28 commits)
  ARM: dts: cfa10049: Add the 74HC595 gpio expanders
  ARM: dts: m28evk: Fix MMC WP pin being inverted
  ARM: dts: cfa10049: Add SSP3 to the 10049 board
  ARM: dts: mxs: Add missing address and size cells in SSP nodes
  ARM: mx28evk: Add I2C EEPROM support
  ARM: dts: mxs: Enable USB1 Host on the CFA-10049 expansion board
  ARM: dts: mxs: Add the second I2C adapter to the CFA10049 expansion board
  ARM: dts: mxs: Add I2C1 muxing options for imx28
  ARM: mx28evk: Add LRADC support
  ARM: mx28evk: Add SPI flash support
  ARM: mxs: Update DENX M28 machine and dts file
  ARM: mx28: Add USB PHY overcurrent pinmux
  ARM: mx28: Add SPI 2 pinmux into imx28.dtsi
  ARM: dts: mxs: Add pwm4 muxing options for imx28
  ARM: dts: mxs: Add alternative I2C muxing options for imx28
  ARM: olinuxino: Add gpio-led support
  ARM: mxs: Let mmc0 pin detect be generic
  ARM: mxs: Rename 'hog-gpios'
  ARM: mxs: remove iomux driver
  ARM: mxs: remove platform device codes
  ...
parents fd6c9b75 13b4569b
......@@ -42,12 +42,13 @@ pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
hog_pins_a: hog-gpios@0 {
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......
......@@ -31,6 +31,21 @@ ssp0: ssp@80010000 {
bus-width = <4>;
status = "okay";
};
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
};
apbx@80040000 {
......@@ -39,6 +54,22 @@ duart: serial@80070000 {
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
auart0: serial@8006c000 {
pinctrl-names = "default";
pinctrl-0 = <&auart0_2pins_a>;
status = "okay";
};
};
};
leds {
compatible = "gpio-leds";
user {
label = "green";
gpios = <&gpio2 1 0>;
linux,default-trigger = "default-on";
};
};
};
......@@ -36,7 +36,7 @@ pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
hog_pins_a: hog-gpios@0 {
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
......
......@@ -140,6 +140,17 @@ auart0_pins_a: auart0@0 {
fsl,pull-up = <0>;
};
auart0_2pins_a: auart0-2pins@0 {
reg = <0>;
fsl,pinmux-ids = <
0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
gpmi_pins_a: gpmi-nand@0 {
reg = <0>;
fsl,pinmux-ids = <
......@@ -183,7 +194,6 @@ mmc0_4bit_pins_a: mmc0-4bit@0 {
0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
>;
fsl,drive-strength = <1>;
......
......@@ -37,7 +37,7 @@ pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
hog_pins_a: hog-gpios@0 {
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
......
/*
* Copyright 2012 Free Electrons
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/*
* The CFA-10049 is an expansion board for the CFA-10036 module, thus we
* need to include the CFA-10036 DTS.
*/
/include/ "imx28-cfa10036.dts"
/ {
model = "Crystalfontz CFA-10049 Board";
compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
spi3_pins_cfa10049: spi3-cfa10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */
0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */
0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */
0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
};
ssp3: ssp@80016000 {
compatible = "fsl,imx28-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi3_pins_cfa10049>;
status = "okay";
gpio5: gpio5@0 {
compatible = "fairchild,74hc595";
gpio-controller;
#gpio-cells = <2>;
reg = <0>;
registers-number = <2>;
spi-max-frequency = <100000>;
};
gpio6: gpio6@1 {
compatible = "fairchild,74hc595";
gpio-controller;
#gpio-cells = <2>;
reg = <1>;
registers-number = <4>;
spi-max-frequency = <100000>;
};
};
};
apbx@80040000 {
i2c1: i2c@8005a000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
usbphy1: usbphy@8007e000 {
status = "okay";
};
};
};
ahb@80080000 {
usb1: usb@80090000 {
vbus-supply = <&reg_usb1_vbus>;
pinctrl-0 = <&usbphy1_pins_a>;
pinctrl-names = "default";
status = "okay";
};
};
regulators {
compatible = "simple-bus";
reg_usb1_vbus: usb1_vbus {
compatible = "regulator-fixed";
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 7 1>;
};
};
};
......@@ -46,11 +46,28 @@ ssp1: ssp@80012000 {
wp-gpios = <&gpio0 28 0>;
};
ssp2: ssp@80014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>;
status = "okay";
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst,sst25vf016b";
spi-max-frequency = <40000000>;
reg = <0>;
};
};
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
hog_pins_a: hog-gpios@0 {
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
......@@ -128,6 +145,10 @@ saif1: saif@80046000 {
status = "okay";
};
lradc@80050000 {
status = "okay";
};
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
......@@ -140,6 +161,12 @@ sgtl5000: codec@0a {
VDDIO-supply = <&reg_3p3v>;
};
at24@51 {
compatible = "at24,24c32";
pagesize = <32>;
reg = <0x51>;
};
};
pwm: pwm@80064000 {
......
......@@ -23,6 +23,8 @@ memory {
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
#address-cells = <1>;
#size-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
status = "okay";
......@@ -61,19 +63,40 @@ ssp0: ssp@80010000 {
&mmc0_cd_cfg
&mmc0_sck_cfg>;
bus-width = <8>;
wp-gpios = <&gpio3 10 1>;
wp-gpios = <&gpio3 10 0>;
vmmc-supply = <&reg_vddio_sd0>;
status = "okay";
};
ssp2: ssp@80014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>;
status = "okay";
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80";
spi-max-frequency = <40000000>;
reg = <0>;
};
};
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
hog_pins_a: hog-gpios@0 {
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -129,6 +152,7 @@ saif1: saif@80046000 {
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
clock-frequency = <400000>;
status = "okay";
sgtl5000: codec@0a {
......@@ -151,32 +175,51 @@ rtc: rtc@68 {
};
};
lradc@80050000 {
status = "okay";
};
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
auart0: serial@8006a000 {
pinctrl-names = "default";
pinctrl-0 = <&auart0_2pins_a>;
usbphy0: usbphy@8007c000 {
status = "okay";
};
auart3: serial@80070000 {
usbphy1: usbphy@8007e000 {
status = "okay";
};
auart0: serial@8006a000 {
pinctrl-names = "default";
pinctrl-0 = <&auart3_pins_a>;
pinctrl-0 = <&auart0_2pins_a>;
status = "okay";
};
};
};
ahb@80080000 {
usb0: usb@80080000 {
vbus-supply = <&reg_usb0_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&usbphy0_pins_a>;
status = "okay";
};
usb1: usb@80090000 {
vbus-supply = <&reg_usb1_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&usbphy1_pins_a>;
status = "okay";
};
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
phy-reset-gpios = <&gpio3 11 0>;
status = "okay";
};
......@@ -198,6 +241,30 @@ reg_3p3v: 3p3v {
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_vddio_sd0: vddio-sd0 {
compatible = "regulator-fixed";
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 28 0>;
};
reg_usb0_vbus: usb0_vbus {
compatible = "regulator-fixed";
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 12 0>;
};
reg_usb1_vbus: usb1_vbus {
compatible = "regulator-fixed";
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 13 0>;
};
};
sound {
......
......@@ -25,7 +25,7 @@ pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
hog_pins_a: hog-gpios@0 {
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
......@@ -34,6 +34,24 @@ hog_pins_a: hog-gpios@0 {
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
mac0_pins_gpio: mac0-gpio-mode@0 {
reg = <0>;
fsl,pinmux-ids = <
0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */
0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */
0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */
0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */
0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */
0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */
0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */
0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */
0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
};
......@@ -72,8 +90,9 @@ auart1: serial@8006c000 {
ahb@80080000 {
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-names = "default", "gpio_mode";
pinctrl-0 = <&mac0_pins_a>;
pinctrl-1 = <&mac0_pins_gpio>;
status = "okay";
};
};
......
......@@ -86,6 +86,8 @@ gpmi-nand@8000c000 {
};
ssp0: ssp@80010000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80010000 0x2000>;
interrupts = <96 82>;
fsl,ssp-dma-channel = <0>;
......@@ -93,6 +95,8 @@ ssp0: ssp@80010000 {
};
ssp1: ssp@80012000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80012000 0x2000>;
interrupts = <97 83>;
fsl,ssp-dma-channel = <1>;
......@@ -100,6 +104,8 @@ ssp1: ssp@80012000 {
};
ssp2: ssp@80014000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80014000 0x2000>;
interrupts = <98 84>;
fsl,ssp-dma-channel = <2>;
......@@ -107,6 +113,8 @@ ssp2: ssp@80014000 {
};
ssp3: ssp@80016000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80016000 0x2000>;
interrupts = <99 85>;
fsl,ssp-dma-channel = <3>;
......@@ -410,6 +418,28 @@ i2c0_pins_a: i2c0@0 {
fsl,pull-up = <1>;
};
i2c0_pins_b: i2c0@1 {
reg = <1>;
fsl,pinmux-ids = <
0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
i2c1_pins_a: i2c1@0 {
reg = <0>;
fsl,pinmux-ids = <
0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
saif0_pins_a: saif0@0 {
reg = <0>;
fsl,pinmux-ids = <
......@@ -453,6 +483,16 @@ pwm2_pins_a: pwm2@0 {
fsl,pull-up = <0>;
};
pwm4_pins_a: pwm4@0 {
reg = <0>;
fsl,pinmux-ids = <
0x31d0 /* MX28_PAD_PWM4__PWM_4 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
lcdif_24bit_pins_a: lcdif-24bit@0 {
reg = <0>;
fsl,pinmux-ids = <
......@@ -507,6 +547,49 @@ can1_pins_a: can1@0 {
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
spi2_pins_a: spi2@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
usbphy0_pins_a: usbphy0@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
>;
fsl,drive-strength = <2>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
usbphy0_pins_b: usbphy0@1 {
reg = <1>;
fsl,pinmux-ids = <
0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
>;
fsl,drive-strength = <2>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
usbphy1_pins_a: usbphy1@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
>;
fsl,drive-strength = <2>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
digctl@8001c000 {
......@@ -638,7 +721,10 @@ saif1: saif@80046000 {
};
lradc@80050000 {
compatible = "fsl,imx28-lradc";
reg = <0x80050000 0x2000>;
interrupts = <10 14 15 16 17 18 19
20 21 22 23 24 25>;
status = "disabled";
};
......
......@@ -23,12 +23,6 @@ CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_MXS=y
CONFIG_MACH_MXS_DT=y
CONFIG_MACH_MX23EVK=y
CONFIG_MACH_MX28EVK=y
CONFIG_MACH_STMP378X_DEVB=y
CONFIG_MACH_TX28=y
CONFIG_MACH_M28EVK=y
CONFIG_MACH_APX4DEVKIT=y
# CONFIG_ARM_THUMB is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
......
if ARCH_MXS
source "arch/arm/mach-mxs/devices/Kconfig"
config SOC_IMX23
bool
select ARM_AMBA
......@@ -27,91 +25,4 @@ config MACH_MXS_DT
Include support for Freescale MXS platforms(i.MX23 and i.MX28)
using the device tree for discovery
config MACH_STMP378X_DEVB
bool "Support STMP378x_devb Platform"
select SOC_IMX23
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_RTC_STMP3XXX
help
Include support for STMP378x-devb platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX23EVK
bool "Support MX23EVK Platform"
select SOC_IMX23
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
select MXS_HAVE_PLATFORM_RTC_STMP3XXX
help
Include support for MX23EVK platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX28EVK
bool "Support MX28EVK Platform"
select SOC_IMX28
select LEDS_GPIO_REGISTER
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_FEC
select MXS_HAVE_PLATFORM_FLEXCAN
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
select MXS_HAVE_PLATFORM_MXS_SAIF
select MXS_HAVE_PLATFORM_MXS_I2C
select MXS_HAVE_PLATFORM_RTC_STMP3XXX
help
Include support for MX28EVK platform. This includes specific
configurations for the board and its peripherals.
config MODULE_TX28
bool
select SOC_IMX28
select LEDS_GPIO_REGISTER
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_FEC
select MXS_HAVE_PLATFORM_MXS_I2C
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXS_PWM
select MXS_HAVE_PLATFORM_RTC_STMP3XXX
config MODULE_M28
bool
select SOC_IMX28
select LEDS_GPIO_REGISTER
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_FEC
select MXS_HAVE_PLATFORM_FLEXCAN
select MXS_HAVE_PLATFORM_MXS_I2C
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
config MODULE_APX4
bool
select SOC_IMX28
select LEDS_GPIO_REGISTER
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_FEC
select MXS_HAVE_PLATFORM_MXS_I2C
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXS_SAIF
config MACH_TX28
bool "Ka-Ro TX28 module"
select MODULE_TX28
config MACH_M28EVK
bool "Support DENX M28EVK Platform"
select MODULE_M28
config MACH_APX4DEVKIT
bool "Support Bluegiga APX4 Development Kit"
select MODULE_APX4
endif
# Common support
obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o
obj-y := icoll.o ocotp.o system.o timer.o mm.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o
obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o
obj-$(CONFIG_MODULE_TX28) += module-tx28.o
obj-$(CONFIG_MACH_TX28) += mach-tx28.o
obj-y += devices/
......@@ -5,6 +5,7 @@ dtb-y += imx23-evk.dtb \
imx23-stmp378x_devb.dtb \
imx28-apx4devkit.dtb \
imx28-cfa10036.dtb \
imx28-cfa10049.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
imx28-tx28.dtb \
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <mach/mx23.h>
#include <mach/devices-common.h>
#include <linux/mxsfb.h>
#include <linux/amba/bus.h>
static inline int mx23_add_duart(void)
{
struct amba_device *d;
d = amba_ahb_device_add(NULL, "duart", MX23_DUART_BASE_ADDR, SZ_8K,
MX23_INT_DUART, 0, 0, 0);
return IS_ERR(d) ? PTR_ERR(d) : 0;
}
extern const struct mxs_auart_data mx23_auart_data[] __initconst;
#define mx23_add_auart(id) mxs_add_auart(&mx23_auart_data[id])
#define mx23_add_auart0() mx23_add_auart(0)
#define mx23_add_auart1() mx23_add_auart(1)
extern const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst;
#define mx23_add_gpmi_nand(pdata) \
mxs_add_gpmi_nand(pdata, &mx23_gpmi_nand_data)
extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
#define mx23_add_mxs_mmc(id, pdata) \
mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata)
#define mx23_add_mxs_pwm(id) mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id)
struct platform_device *__init mx23_add_mxsfb(
const struct mxsfb_platform_data *pdata);
struct platform_device *__init mx23_add_rtc_stmp3xxx(void);
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <mach/mx28.h>
#include <mach/devices-common.h>
#include <linux/mxsfb.h>
#include <linux/amba/bus.h>
static inline int mx28_add_duart(void)
{
struct amba_device *d;
d = amba_ahb_device_add(NULL, "duart", MX28_DUART_BASE_ADDR, SZ_8K,
MX28_INT_DUART, 0, 0, 0);
return IS_ERR(d) ? PTR_ERR(d) : 0;
}
extern const struct mxs_auart_data mx28_auart_data[] __initconst;
#define mx28_add_auart(id) mxs_add_auart(&mx28_auart_data[id])
#define mx28_add_auart0() mx28_add_auart(0)
#define mx28_add_auart1() mx28_add_auart(1)
#define mx28_add_auart2() mx28_add_auart(2)
#define mx28_add_auart3() mx28_add_auart(3)
#define mx28_add_auart4() mx28_add_auart(4)
extern const struct mxs_fec_data mx28_fec_data[] __initconst;
#define mx28_add_fec(id, pdata) \
mxs_add_fec(&mx28_fec_data[id], pdata)
extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
#define mx28_add_flexcan(id, pdata) \
mxs_add_flexcan(&mx28_flexcan_data[id], pdata)
#define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata)
#define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata)
extern const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst;
#define mx28_add_gpmi_nand(pdata) \
mxs_add_gpmi_nand(pdata, &mx28_gpmi_nand_data)
extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
#define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
#define mx28_add_mxs_mmc(id, pdata) \
mxs_add_mxs_mmc(&mx28_mxs_mmc_data[id], pdata)
#define mx28_add_mxs_pwm(id) mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id)
struct platform_device *__init mx28_add_mxsfb(
const struct mxsfb_platform_data *pdata);
extern const struct mxs_saif_data mx28_saif_data[] __initconst;
#define mx28_add_saif(id, pdata) \
mxs_add_saif(&mx28_saif_data[id], pdata)
struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
/*
* Copyright 2008 Sascha Hauer, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
struct platform_device *__init mxs_add_platform_device_dmamask(
const char *name, int id,
const struct resource *res, unsigned int num_resources,
const void *data, size_t size_data, u64 dmamask)
{
int ret = -ENOMEM;
struct platform_device *pdev;
pdev = platform_device_alloc(name, id);
if (!pdev)
goto err;
if (dmamask) {
/*
* This memory isn't freed when the device is put,
* I don't have a nice idea for that though. Conceptually
* dma_mask in struct device should not be a pointer.
* See http://thread.gmane.org/gmane.linux.kernel.pci/9081
*/
pdev->dev.dma_mask =
kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
if (!pdev->dev.dma_mask)
/* ret is still -ENOMEM; */
goto err;
*pdev->dev.dma_mask = dmamask;
pdev->dev.coherent_dma_mask = dmamask;
}
if (res) {
ret = platform_device_add_resources(pdev, res, num_resources);
if (ret)
goto err;
}
if (data) {
ret = platform_device_add_data(pdev, data, size_data);
if (ret)
goto err;
}
ret = platform_device_add(pdev);
if (ret) {
err:
if (dmamask)
kfree(pdev->dev.dma_mask);
platform_device_put(pdev);
return ERR_PTR(ret);
}
return pdev;
}
struct device mxs_apbh_bus = {
.init_name = "mxs_apbh",
.parent = &platform_bus,
};
static int __init mxs_device_init(void)
{
return device_register(&mxs_apbh_bus);
}
core_initcall(mxs_device_init);
config MXS_HAVE_AMBA_DUART
bool
config MXS_HAVE_PLATFORM_AUART
bool
config MXS_HAVE_PLATFORM_FEC
bool
config MXS_HAVE_PLATFORM_FLEXCAN
select HAVE_CAN_FLEXCAN if CAN
bool
config MXS_HAVE_PLATFORM_GPMI_NAND
bool
config MXS_HAVE_PLATFORM_MXS_I2C
bool
config MXS_HAVE_PLATFORM_MXS_MMC
bool
config MXS_HAVE_PLATFORM_MXS_PWM
bool
config MXS_HAVE_PLATFORM_MXSFB
bool
config MXS_HAVE_PLATFORM_MXS_SAIF
bool
config MXS_HAVE_PLATFORM_RTC_STMP3XXX
bool
obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
obj-y += platform-dma.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_GPMI_NAND) += platform-gpmi-nand.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
obj-y += platform-gpio-mxs.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_RTC_STMP3XXX) += platform-rtc-stmp3xxx.o
/*
* Copyright (C) 2010 Pengutronix
* Sascha Hauer <s.hauer@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
#include <asm/sizes.h>
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
#define mxs_auart_data_entry_single(soc, _id, hwid) \
{ \
.id = _id, \
.iobase = soc ## _AUART ## hwid ## _BASE_ADDR, \
.irq = soc ## _INT_AUART ## hwid, \
}
#define mxs_auart_data_entry(soc, _id, hwid) \
[_id] = mxs_auart_data_entry_single(soc, _id, hwid)
#ifdef CONFIG_SOC_IMX23
const struct mxs_auart_data mx23_auart_data[] __initconst = {
#define mx23_auart_data_entry(_id, hwid) \
mxs_auart_data_entry(MX23, _id, hwid)
mx23_auart_data_entry(0, 1),
mx23_auart_data_entry(1, 2),
};
#endif
#ifdef CONFIG_SOC_IMX28
const struct mxs_auart_data mx28_auart_data[] __initconst = {
#define mx28_auart_data_entry(_id) \
mxs_auart_data_entry(MX28, _id, _id)
mx28_auart_data_entry(0),
mx28_auart_data_entry(1),
mx28_auart_data_entry(2),
mx28_auart_data_entry(3),
mx28_auart_data_entry(4),
};
#endif
struct platform_device *__init mxs_add_auart(
const struct mxs_auart_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_8K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return mxs_add_platform_device_dmamask("mxs-auart", data->id,
res, ARRAY_SIZE(res), NULL, 0,
DMA_BIT_MASK(32));
}
/*
* Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <linux/compiler.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/init.h>
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
struct platform_device *__init mxs_add_dma(const char *devid,
resource_size_t base)
{
struct resource res[] = {
{
.start = base,
.end = base + SZ_8K - 1,
.flags = IORESOURCE_MEM,
}
};
return mxs_add_platform_device_dmamask(devid, -1,
res, ARRAY_SIZE(res), NULL, 0,
DMA_BIT_MASK(32));
}
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
#include <asm/sizes.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
#define mxs_fec_data_entry_single(soc, _id) \
{ \
.id = _id, \
.iobase = soc ## _ENET_MAC ## _id ## _BASE_ADDR, \
.irq = soc ## _INT_ENET_MAC ## _id, \
}
#define mxs_fec_data_entry(soc, _id) \
[_id] = mxs_fec_data_entry_single(soc, _id)
#ifdef CONFIG_SOC_IMX28
const struct mxs_fec_data mx28_fec_data[] __initconst = {
#define mx28_fec_data_entry(_id) \
mxs_fec_data_entry(MX28, _id)
mx28_fec_data_entry(0),
mx28_fec_data_entry(1),
};
#endif
struct platform_device *__init mxs_add_fec(
const struct mxs_fec_data *data,
const struct fec_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return mxs_add_platform_device_dmamask("imx28-fec", data->id,
res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
DMA_BIT_MASK(32));
}
/*
* Copyright (C) 2010, 2011 Pengutronix,
* Marc Kleine-Budde <kernel@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <asm/sizes.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
#define mxs_flexcan_data_entry_single(soc, _id, _hwid, _size) \
{ \
.id = _id, \
.iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_CAN ## _hwid, \
}
#define mxs_flexcan_data_entry(soc, _id, _hwid, _size) \
[_id] = mxs_flexcan_data_entry_single(soc, _id, _hwid, _size)
#ifdef CONFIG_SOC_IMX28
const struct mxs_flexcan_data mx28_flexcan_data[] __initconst = {
#define mx28_flexcan_data_entry(_id, _hwid) \
mxs_flexcan_data_entry_single(MX28, _id, _hwid, SZ_8K)
mx28_flexcan_data_entry(0, 0),
mx28_flexcan_data_entry(1, 1),
};
#endif /* ifdef CONFIG_SOC_IMX28 */
struct platform_device *__init mxs_add_flexcan(
const struct mxs_flexcan_data *data,
const struct flexcan_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return mxs_add_platform_device("flexcan", data->id,
res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
/*
* Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <linux/compiler.h>
#include <linux/err.h>
#include <linux/init.h>
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
struct platform_device *__init mxs_add_gpio(
char *name, int id, resource_size_t iobase, int irq)
{
struct resource res[] = {
{
.start = iobase,
.end = iobase + SZ_8K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = irq,
.end = irq,
.flags = IORESOURCE_IRQ,
},
};
return platform_device_register_resndata(&mxs_apbh_bus,
name, id, res, ARRAY_SIZE(res), NULL, 0);
}
/*
* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <asm/sizes.h>
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
#include <linux/dma-mapping.h>
#ifdef CONFIG_SOC_IMX23
const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst = {
.devid = "imx23-gpmi-nand",
.res = {
/* GPMI */
DEFINE_RES_MEM_NAMED(MX23_GPMI_BASE_ADDR, SZ_8K,
GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_ATTENTION,
GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
/* BCH */
DEFINE_RES_MEM_NAMED(MX23_BCH_BASE_ADDR, SZ_8K,
GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
DEFINE_RES_IRQ_NAMED(MX23_INT_BCH,
GPMI_NAND_BCH_INTERRUPT_RES_NAME),
/* DMA */
DEFINE_RES_NAMED(MX23_DMA_GPMI0,
MX23_DMA_GPMI3 - MX23_DMA_GPMI0 + 1,
GPMI_NAND_DMA_CHANNELS_RES_NAME,
IORESOURCE_DMA),
DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_DMA,
GPMI_NAND_DMA_INTERRUPT_RES_NAME),
},
};
#endif
#ifdef CONFIG_SOC_IMX28
const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst = {
.devid = "imx28-gpmi-nand",
.res = {
/* GPMI */
DEFINE_RES_MEM_NAMED(MX28_GPMI_BASE_ADDR, SZ_8K,
GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI,
GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
/* BCH */
DEFINE_RES_MEM_NAMED(MX28_BCH_BASE_ADDR, SZ_8K,
GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
DEFINE_RES_IRQ_NAMED(MX28_INT_BCH,
GPMI_NAND_BCH_INTERRUPT_RES_NAME),
/* DMA */
DEFINE_RES_NAMED(MX28_DMA_GPMI0,
MX28_DMA_GPMI7 - MX28_DMA_GPMI0 + 1,
GPMI_NAND_DMA_CHANNELS_RES_NAME,
IORESOURCE_DMA),
DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI_DMA,
GPMI_NAND_DMA_INTERRUPT_RES_NAME),
},
};
#endif
struct platform_device *__init
mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
const struct mxs_gpmi_nand_data *data)
{
return mxs_add_platform_device_dmamask(data->devid, -1,
data->res, GPMI_NAND_RES_SIZE,
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
/*
* Copyright (C) 2011 Pengutronix
* Wolfram Sang <w.sang@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <asm/sizes.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
#define mxs_i2c_data_entry_single(soc, _id) \
{ \
.id = _id, \
.iobase = soc ## _I2C ## _id ## _BASE_ADDR, \
.errirq = soc ## _INT_I2C ## _id ## _ERROR, \
.dmairq = soc ## _INT_I2C ## _id ## _DMA, \
}
#define mxs_i2c_data_entry(soc, _id) \
[_id] = mxs_i2c_data_entry_single(soc, _id)
#ifdef CONFIG_SOC_IMX28
const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst = {
mxs_i2c_data_entry(MX28, 0),
mxs_i2c_data_entry(MX28, 1),
};
#endif
struct platform_device *__init mxs_add_mxs_i2c(
const struct mxs_mxs_i2c_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_8K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->errirq,
.end = data->errirq,
.flags = IORESOURCE_IRQ,
}, {
.start = data->dmairq,
.end = data->dmairq,
.flags = IORESOURCE_IRQ,
},
};
return mxs_add_platform_device("mxs-i2c", data->id, res,
ARRAY_SIZE(res), NULL, 0);
}
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <linux/compiler.h>
#include <linux/err.h>
#include <linux/init.h>
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
#define mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid) \
{ \
.devid = _devid, \
.id = _id, \
.iobase = soc ## _SSP ## hwid ## _BASE_ADDR, \
.dma = soc ## _DMA_SSP ## hwid, \
.irq_err = soc ## _INT_SSP ## hwid ## _ERROR, \
.irq_dma = soc ## _INT_SSP ## hwid ## _DMA, \
}
#define mxs_mxs_mmc_data_entry(soc, _devid, _id, hwid) \
[_id] = mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid)
#ifdef CONFIG_SOC_IMX23
const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = {
mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 0, 1),
mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 1, 2),
};
#endif
#ifdef CONFIG_SOC_IMX28
const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = {
mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 0, 0),
mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 1, 1),
mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 2, 2),
mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 3, 3),
};
#endif
struct platform_device *__init mxs_add_mxs_mmc(
const struct mxs_mxs_mmc_data *data,
const struct mxs_mmc_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_8K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->dma,
.end = data->dma,
.flags = IORESOURCE_DMA,
}, {
.start = data->irq_err,
.end = data->irq_err,
.flags = IORESOURCE_IRQ,
}, {
.start = data->irq_dma,
.end = data->irq_dma,
.flags = IORESOURCE_IRQ,
},
};
return mxs_add_platform_device(data->devid, data->id,
res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
/*
* Copyright (C) 2010 Pengutronix
* Sascha Hauer <s.hauer@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <asm/sizes.h>
#include <mach/devices-common.h>
struct platform_device *__init mxs_add_mxs_pwm(resource_size_t iobase, int id)
{
struct resource res = {
.flags = IORESOURCE_MEM,
};
res.start = iobase + 0x10 + 0x20 * id;
res.end = res.start + 0x1f;
return mxs_add_platform_device("mxs-pwm", id, &res, 1, NULL, 0);
}
/*
* Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <linux/compiler.h>
#include <linux/err.h>
#include <linux/init.h>
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
#define mxs_saif_data_entry_single(soc, _id) \
{ \
.id = _id, \
.iobase = soc ## _SAIF ## _id ## _BASE_ADDR, \
.irq = soc ## _INT_SAIF ## _id, \
.dma = soc ## _DMA_SAIF ## _id, \
.dmairq = soc ## _INT_SAIF ## _id ##_DMA, \
}
#define mxs_saif_data_entry(soc, _id) \
[_id] = mxs_saif_data_entry_single(soc, _id)
#ifdef CONFIG_SOC_IMX28
const struct mxs_saif_data mx28_saif_data[] __initconst = {
mxs_saif_data_entry(MX28, 0),
mxs_saif_data_entry(MX28, 1),
};
#endif
struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data,
const struct mxs_saif_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
}, {
.start = data->dma,
.end = data->dma,
.flags = IORESOURCE_DMA,
}, {
.start = data->dmairq,
.end = data->dmairq,
.flags = IORESOURCE_IRQ,
},
};
return mxs_add_platform_device("mxs-saif", data->id, res,
ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
/*
* Copyright (C) 2011 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
#include <asm/sizes.h>
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
#include <linux/mxsfb.h>
#ifdef CONFIG_SOC_IMX23
struct platform_device *__init mx23_add_mxsfb(
const struct mxsfb_platform_data *pdata)
{
struct resource res[] = {
{
.start = MX23_LCDIF_BASE_ADDR,
.end = MX23_LCDIF_BASE_ADDR + SZ_8K - 1,
.flags = IORESOURCE_MEM,
},
};
return mxs_add_platform_device_dmamask("imx23-fb", -1,
res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
#endif /* ifdef CONFIG_SOC_IMX23 */
#ifdef CONFIG_SOC_IMX28
struct platform_device *__init mx28_add_mxsfb(
const struct mxsfb_platform_data *pdata)
{
struct resource res[] = {
{
.start = MX28_LCDIF_BASE_ADDR,
.end = MX28_LCDIF_BASE_ADDR + SZ_8K - 1,
.flags = IORESOURCE_MEM,
},
};
return mxs_add_platform_device_dmamask("imx28-fb", -1,
res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
#endif /* ifdef CONFIG_SOC_IMX28 */
/*
* Copyright (C) 2011 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <asm/sizes.h>
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
#ifdef CONFIG_SOC_IMX23
struct platform_device *__init mx23_add_rtc_stmp3xxx(void)
{
struct resource res[] = {
{
.start = MX23_RTC_BASE_ADDR,
.end = MX23_RTC_BASE_ADDR + SZ_8K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = MX23_INT_RTC_ALARM,
.end = MX23_INT_RTC_ALARM,
.flags = IORESOURCE_IRQ,
},
};
return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
NULL, 0);
}
#endif /* CONFIG_SOC_IMX23 */
#ifdef CONFIG_SOC_IMX28
struct platform_device *__init mx28_add_rtc_stmp3xxx(void)
{
struct resource res[] = {
{
.start = MX28_RTC_BASE_ADDR,
.end = MX28_RTC_BASE_ADDR + SZ_8K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = MX28_INT_RTC_ALARM,
.end = MX28_INT_RTC_ALARM,
.flags = IORESOURCE_IRQ,
},
};
return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
NULL, 0);
}
#endif /* CONFIG_SOC_IMX28 */
......@@ -17,21 +17,12 @@ extern void mxs_timer_init(int);
extern void mxs_restart(char, const char *);
extern int mxs_saif_clkmux_select(unsigned int clkmux);
extern void mx23_soc_init(void);
extern int mx23_clocks_init(void);
extern void mx23_map_io(void);
extern void mx23_init_irq(void);
extern void mx28_soc_init(void);
extern int mx28_clocks_init(void);
extern void mx28_map_io(void);
extern void mx28_init_irq(void);
extern void icoll_init_irq(void);
extern struct platform_device *mxs_add_dma(const char *devid,
resource_size_t base);
extern struct platform_device *mxs_add_gpio(char *name, int id,
resource_size_t iobase, int irq);
#endif /* __MACH_MXS_COMMON_H__ */
/*
* Copyright (C) 2009-2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/amba/bus.h>
extern struct device mxs_apbh_bus;
struct platform_device *mxs_add_platform_device_dmamask(
const char *name, int id,
const struct resource *res, unsigned int num_resources,
const void *data, size_t size_data, u64 dmamask);
static inline struct platform_device *mxs_add_platform_device(
const char *name, int id,
const struct resource *res, unsigned int num_resources,
const void *data, size_t size_data)
{
return mxs_add_platform_device_dmamask(
name, id, res, num_resources, data, size_data, 0);
}
/* auart */
struct mxs_auart_data {
int id;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init mxs_add_auart(
const struct mxs_auart_data *data);
/* fec */
#include <linux/fec.h>
struct mxs_fec_data {
int id;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init mxs_add_fec(
const struct mxs_fec_data *data,
const struct fec_platform_data *pdata);
/* flexcan */
#include <linux/can/platform/flexcan.h>
struct mxs_flexcan_data {
int id;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init mxs_add_flexcan(
const struct mxs_flexcan_data *data,
const struct flexcan_platform_data *pdata);
/* gpmi-nand */
#include <linux/mtd/gpmi-nand.h>
struct mxs_gpmi_nand_data {
const char *devid;
const struct resource res[GPMI_NAND_RES_SIZE];
};
struct platform_device *__init
mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
const struct mxs_gpmi_nand_data *data);
/* i2c */
struct mxs_mxs_i2c_data {
int id;
resource_size_t iobase;
resource_size_t errirq;
resource_size_t dmairq;
};
struct platform_device * __init mxs_add_mxs_i2c(
const struct mxs_mxs_i2c_data *data);
/* mmc */
#include <linux/mmc/mxs-mmc.h>
struct mxs_mxs_mmc_data {
const char *devid;
int id;
resource_size_t iobase;
resource_size_t dma;
resource_size_t irq_err;
resource_size_t irq_dma;
};
struct platform_device *__init mxs_add_mxs_mmc(
const struct mxs_mxs_mmc_data *data,
const struct mxs_mmc_platform_data *pdata);
/* pwm */
struct platform_device *__init mxs_add_mxs_pwm(
resource_size_t iobase, int id);
/* saif */
#include <sound/saif.h>
struct mxs_saif_data {
int id;
resource_size_t iobase;
resource_size_t irq;
resource_size_t dma;
resource_size_t dmairq;
};
struct platform_device *__init mxs_add_saif(
const struct mxs_saif_data *data,
const struct mxs_saif_platform_data *pdata);
This diff is collapsed.
This diff is collapsed.
/*
* Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
* <armlinux@phytec.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __MACH_MXS_IOMUX_H__
#define __MACH_MXS_IOMUX_H__
/*
* IOMUX/PAD Bit field definitions
*
* PAD_BANK: 0..2 (3)
* PAD_PIN: 3..7 (5)
* PAD_MUXSEL: 8..9 (2)
* PAD_MA: 10..11 (2)
* PAD_MA_VALID: 12 (1)
* PAD_VOL: 13 (1)
* PAD_VOL_VALID: 14 (1)
* PAD_PULL: 15 (1)
* PAD_PULL_VALID: 16 (1)
* RESERVED: 17..31 (15)
*/
typedef u32 iomux_cfg_t;
#define MXS_PAD_BANK_SHIFT 0
#define MXS_PAD_BANK_MASK ((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT)
#define MXS_PAD_PIN_SHIFT 3
#define MXS_PAD_PIN_MASK ((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT)
#define MXS_PAD_MUXSEL_SHIFT 8
#define MXS_PAD_MUXSEL_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT)
#define MXS_PAD_MA_SHIFT 10
#define MXS_PAD_MA_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT)
#define MXS_PAD_MA_VALID_SHIFT 12
#define MXS_PAD_MA_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT)
#define MXS_PAD_VOL_SHIFT 13
#define MXS_PAD_VOL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT)
#define MXS_PAD_VOL_VALID_SHIFT 14
#define MXS_PAD_VOL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT)
#define MXS_PAD_PULL_SHIFT 15
#define MXS_PAD_PULL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT)
#define MXS_PAD_PULL_VALID_SHIFT 16
#define MXS_PAD_PULL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT)
#define PAD_MUXSEL_0 0
#define PAD_MUXSEL_1 1
#define PAD_MUXSEL_2 2
#define PAD_MUXSEL_GPIO 3
#define PAD_4MA 0
#define PAD_8MA 1
#define PAD_12MA 2
#define PAD_16MA 3
#define PAD_1V8 0
#define PAD_3V3 1
#define PAD_NOPULL 0
#define PAD_PULLUP 1
#define MXS_PAD_4MA ((PAD_4MA << MXS_PAD_MA_SHIFT) | \
MXS_PAD_MA_VALID_MASK)
#define MXS_PAD_8MA ((PAD_8MA << MXS_PAD_MA_SHIFT) | \
MXS_PAD_MA_VALID_MASK)
#define MXS_PAD_12MA ((PAD_12MA << MXS_PAD_MA_SHIFT) | \
MXS_PAD_MA_VALID_MASK)
#define MXS_PAD_16MA ((PAD_16MA << MXS_PAD_MA_SHIFT) | \
MXS_PAD_MA_VALID_MASK)
#define MXS_PAD_1V8 ((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \
MXS_PAD_VOL_VALID_MASK)
#define MXS_PAD_3V3 ((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \
MXS_PAD_VOL_VALID_MASK)
#define MXS_PAD_NOPULL ((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \
MXS_PAD_PULL_VALID_MASK)
#define MXS_PAD_PULLUP ((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \
MXS_PAD_PULL_VALID_MASK)
/* generic pad control used in most cases */
#define MXS_PAD_CTRL (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL)
#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull) \
(((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) | \
((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) | \
((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) | \
((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) | \
((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) | \
((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT))
/*
* A pad becomes naked, when none of mA, vol or pull
* validity bits is set.
*/
#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \
MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0)
static inline unsigned int PAD_BANK(iomux_cfg_t pad)
{
return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT;
}
static inline unsigned int PAD_PIN(iomux_cfg_t pad)
{
return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT;
}
static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad)
{
return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT;
}
static inline unsigned int PAD_MA(iomux_cfg_t pad)
{
return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT;
}
static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad)
{
return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT;
}
static inline unsigned int PAD_VOL(iomux_cfg_t pad)
{
return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT;
}
static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad)
{
return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT;
}
static inline unsigned int PAD_PULL(iomux_cfg_t pad)
{
return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT;
}
static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad)
{
return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT;
}
/*
* configures a single pad in the iomuxer
*/
int mxs_iomux_setup_pad(iomux_cfg_t pad);
/*
* configures multiple pads
* convenient way to call the above function with tables
*/
int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count);
#endif /* __MACH_MXS_IOMUX_H__*/
/*
* Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
* Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
* <armlinux@phytec.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <mach/mxs.h>
#include <mach/iomux.h>
/*
* configures a single pad in the iomuxer
*/
int mxs_iomux_setup_pad(iomux_cfg_t pad)
{
u32 reg, ofs, bp, bm;
void __iomem *iomux_base = MXS_IO_ADDRESS(MXS_PINCTRL_BASE_ADDR);
/* muxsel */
ofs = 0x100;
ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10;
bp = PAD_PIN(pad) % 16 * 2;
bm = 0x3 << bp;
reg = __raw_readl(iomux_base + ofs);
reg &= ~bm;
reg |= PAD_MUXSEL(pad) << bp;
__raw_writel(reg, iomux_base + ofs);
/* drive */
ofs = cpu_is_mx23() ? 0x200 : 0x300;
ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10;
/* mA */
if (PAD_MA_VALID(pad)) {
bp = PAD_PIN(pad) % 8 * 4;
bm = 0x3 << bp;
reg = __raw_readl(iomux_base + ofs);
reg &= ~bm;
reg |= PAD_MA(pad) << bp;
__raw_writel(reg, iomux_base + ofs);
}
/* vol */
if (PAD_VOL_VALID(pad)) {
bp = PAD_PIN(pad) % 8 * 4 + 2;
if (PAD_VOL(pad))
__mxs_setl(1 << bp, iomux_base + ofs);
else
__mxs_clrl(1 << bp, iomux_base + ofs);
}
/* pull */
if (PAD_PULL_VALID(pad)) {
ofs = cpu_is_mx23() ? 0x400 : 0x600;
ofs += PAD_BANK(pad) * 0x10;
bp = PAD_PIN(pad);
if (PAD_PULL(pad))
__mxs_setl(1 << bp, iomux_base + ofs);
else
__mxs_clrl(1 << bp, iomux_base + ofs);
}
return 0;
}
int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count)
{
const iomux_cfg_t *p = pad_list;
int i;
int ret;
for (i = 0; i < count; i++) {
ret = mxs_iomux_setup_pad(*p);
if (ret)
return ret;
p++;
}
return 0;
}
/*
* Copyright (C) 2011-2012
* Lauri Hintsala, Bluegiga, <lauri.hintsala@bluegiga.com>
* Veli-Pekka Peltola, Bluegiga, <veli-pekka.peltola@bluegiga.com>
*
* based on: mach-mx28evk.c
* Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/clk.h>
#include <linux/i2c.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/micrel_phy.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
#include <mach/digctl.h>
#include <mach/iomux-mx28.h>
#include "devices-mx28.h"
#define APX4DEVKIT_GPIO_USERLED MXS_GPIO_NR(3, 28)
static const iomux_cfg_t apx4devkit_pads[] __initconst = {
/* duart */
MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
/* auart0 */
MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
/* auart1 */
MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
/* auart2 */
MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL,
MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL,
/* auart3 */
MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL,
MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL,
#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
/* fec0 */
MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
/* i2c */
MX28_PAD_I2C0_SCL__I2C0_SCL,
MX28_PAD_I2C0_SDA__I2C0_SDA,
/* mmc0 */
MX28_PAD_SSP0_DATA0__SSP0_D0 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA1__SSP0_D1 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA2__SSP0_D2 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA3__SSP0_D3 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA4__SSP0_D4 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA5__SSP0_D5 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA6__SSP0_D6 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA7__SSP0_D7 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_CMD__SSP0_CMD |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
MX28_PAD_SSP0_SCK__SSP0_SCK |
(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
/* led */
MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
/* saif0 & saif1 */
MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
};
/* led */
static const struct gpio_led apx4devkit_leds[] __initconst = {
{
.name = "user-led",
.default_trigger = "heartbeat",
.gpio = APX4DEVKIT_GPIO_USERLED,
},
};
static const struct gpio_led_platform_data apx4devkit_led_data __initconst = {
.leds = apx4devkit_leds,
.num_leds = ARRAY_SIZE(apx4devkit_leds),
};
static const struct fec_platform_data mx28_fec_pdata __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = {
.wp_gpio = -EINVAL,
.flags = SLOTF_4_BIT_CAPABLE,
};
static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = {
{ I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */
{ I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */
};
#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \
defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = {
REGULATOR_SUPPLY("VDDA", "0-000a"),
REGULATOR_SUPPLY("VDDIO", "0-000a"),
};
static struct regulator_init_data apx4devkit_vdd_reg_init_data = {
.constraints = {
.name = "3V3",
.always_on = 1,
},
.consumer_supplies = apx4devkit_audio_consumer_supplies,
.num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies),
};
static struct fixed_voltage_config apx4devkit_vdd_pdata = {
.supply_name = "board-3V3",
.microvolts = 3300000,
.gpio = -EINVAL,
.enabled_at_boot = 1,
.init_data = &apx4devkit_vdd_reg_init_data,
};
static struct platform_device apx4devkit_voltage_regulator = {
.name = "reg-fixed-voltage",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &apx4devkit_vdd_pdata,
},
};
static void __init apx4devkit_add_regulators(void)
{
platform_device_register(&apx4devkit_voltage_regulator);
}
#else
static void __init apx4devkit_add_regulators(void) {}
#endif
static const struct mxs_saif_platform_data
apx4devkit_mxs_saif_pdata[] __initconst = {
/* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
{
.master_mode = 1,
.master_id = 0,
}, {
.master_mode = 0,
.master_id = 0,
},
};
static int apx4devkit_phy_fixup(struct phy_device *phy)
{
phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
return 0;
}
static void __init apx4devkit_fec_phy_clk_enable(void)
{
struct clk *clk;
/* Enable fec phy clock */
clk = clk_get_sys("enet_out", NULL);
if (!IS_ERR(clk))
clk_prepare_enable(clk);
}
static void __init apx4devkit_init(void)
{
mx28_soc_init();
mxs_iomux_setup_multiple_pads(apx4devkit_pads,
ARRAY_SIZE(apx4devkit_pads));
mx28_add_duart();
mx28_add_auart0();
mx28_add_auart1();
mx28_add_auart2();
mx28_add_auart3();
/*
* Register fixup for the Micrel KS8031 PHY clock
* (shares same ID with KS8051)
*/
phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
apx4devkit_phy_fixup);
apx4devkit_fec_phy_clk_enable();
mx28_add_fec(0, &mx28_fec_pdata);
mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
gpio_led_register_device(0, &apx4devkit_led_data);
mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]);
mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]);
apx4devkit_add_regulators();
mx28_add_mxs_i2c(0);
i2c_register_board_info(0, apx4devkit_i2c_boardinfo,
ARRAY_SIZE(apx4devkit_i2c_boardinfo));
mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0);
}
static void __init apx4devkit_timer_init(void)
{
mx28_clocks_init();
}
static struct sys_timer apx4devkit_timer = {
.init = apx4devkit_timer_init,
};
MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit")
.map_io = mx28_map_io,
.init_irq = mx28_init_irq,
.timer = &apx4devkit_timer,
.init_machine = apx4devkit_init,
.restart = mxs_restart,
MACHINE_END
This diff is collapsed.
/*
* Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
#include <mach/iomux-mx23.h>
#include "devices-mx23.h"
#define MX23EVK_LCD_ENABLE MXS_GPIO_NR(1, 18)
#define MX23EVK_BL_ENABLE MXS_GPIO_NR(1, 28)
#define MX23EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30)
#define MX23EVK_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29)
static const iomux_cfg_t mx23evk_pads[] __initconst = {
/* duart */
MX23_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
MX23_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
/* auart */
MX23_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
MX23_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
MX23_PAD_AUART1_CTS__AUART1_CTS | MXS_PAD_CTRL,
MX23_PAD_AUART1_RTS__AUART1_RTS | MXS_PAD_CTRL,
/* mxsfb (lcdif) */
MX23_PAD_LCD_D00__LCD_D00 | MXS_PAD_CTRL,
MX23_PAD_LCD_D01__LCD_D01 | MXS_PAD_CTRL,
MX23_PAD_LCD_D02__LCD_D02 | MXS_PAD_CTRL,
MX23_PAD_LCD_D03__LCD_D03 | MXS_PAD_CTRL,
MX23_PAD_LCD_D04__LCD_D04 | MXS_PAD_CTRL,
MX23_PAD_LCD_D05__LCD_D05 | MXS_PAD_CTRL,
MX23_PAD_LCD_D06__LCD_D06 | MXS_PAD_CTRL,
MX23_PAD_LCD_D07__LCD_D07 | MXS_PAD_CTRL,
MX23_PAD_LCD_D08__LCD_D08 | MXS_PAD_CTRL,
MX23_PAD_LCD_D09__LCD_D09 | MXS_PAD_CTRL,
MX23_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
MX23_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
MX23_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
MX23_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
MX23_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
MX23_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
MX23_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
MX23_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
MX23_PAD_GPMI_D08__LCD_D18 | MXS_PAD_CTRL,
MX23_PAD_GPMI_D09__LCD_D19 | MXS_PAD_CTRL,
MX23_PAD_GPMI_D10__LCD_D20 | MXS_PAD_CTRL,
MX23_PAD_GPMI_D11__LCD_D21 | MXS_PAD_CTRL,
MX23_PAD_GPMI_D12__LCD_D22 | MXS_PAD_CTRL,
MX23_PAD_GPMI_D13__LCD_D23 | MXS_PAD_CTRL,
MX23_PAD_LCD_VSYNC__LCD_VSYNC | MXS_PAD_CTRL,
MX23_PAD_LCD_HSYNC__LCD_HSYNC | MXS_PAD_CTRL,
MX23_PAD_LCD_DOTCK__LCD_DOTCK | MXS_PAD_CTRL,
MX23_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
/* LCD panel enable */
MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL,
/* backlight control */
MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL,
/* mmc */
MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_GPMI_D08__SSP1_DATA4 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_GPMI_D09__SSP1_DATA5 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_GPMI_D10__SSP1_DATA6 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_GPMI_D11__SSP1_DATA7 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_SSP1_CMD__SSP1_CMD |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_SSP1_DETECT__SSP1_DETECT |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
MX23_PAD_SSP1_SCK__SSP1_SCK |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
/* write protect */
MX23_PAD_PWM4__GPIO_1_30 |
(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
/* slot power enable */
MX23_PAD_PWM3__GPIO_1_29 |
(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
};
/* mxsfb (lcdif) */
static struct fb_videomode mx23evk_video_modes[] = {
{
.name = "Samsung-LMS430HF02",
.refresh = 60,
.xres = 480,
.yres = 272,
.pixclock = 108096, /* picosecond (9.2 MHz) */
.left_margin = 15,
.right_margin = 8,
.upper_margin = 12,
.lower_margin = 4,
.hsync_len = 1,
.vsync_len = 1,
.sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
FB_SYNC_DOTCLK_FAILING_ACT,
},
};
static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = {
.mode_list = mx23evk_video_modes,
.mode_count = ARRAY_SIZE(mx23evk_video_modes),
.default_bpp = 32,
.ld_intf_width = STMLCDIF_24BIT,
};
static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = {
.wp_gpio = MX23EVK_MMC0_WRITE_PROTECT,
.flags = SLOTF_8_BIT_CAPABLE,
};
static void __init mx23evk_init(void)
{
int ret;
mx23_soc_init();
mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads));
mx23_add_duart();
mx23_add_auart0();
/* power on mmc slot by writing 0 to the gpio */
ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
"mmc0-slot-power");
if (ret)
pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata);
ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
if (ret)
pr_warn("failed to request gpio lcd-enable: %d\n", ret);
else
gpio_set_value(MX23EVK_LCD_ENABLE, 1);
ret = gpio_request_one(MX23EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
if (ret)
pr_warn("failed to request gpio bl-enable: %d\n", ret);
else
gpio_set_value(MX23EVK_BL_ENABLE, 1);
mx23_add_mxsfb(&mx23evk_mxsfb_pdata);
mx23_add_rtc_stmp3xxx();
}
static void __init mx23evk_timer_init(void)
{
mx23_clocks_init();
}
static struct sys_timer mx23evk_timer = {
.init = mx23evk_timer_init,
};
MACHINE_START(MX23EVK, "Freescale MX23 EVK")
/* Maintainer: Freescale Semiconductor, Inc. */
.map_io = mx23_map_io,
.init_irq = mx23_init_irq,
.timer = &mx23evk_timer,
.init_machine = mx23evk_init,
.restart = mxs_restart,
MACHINE_END
This diff is collapsed.
......@@ -12,8 +12,10 @@
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/can/platform/flexcan.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/irqdomain.h>
#include <linux/micrel_phy.h>
......@@ -21,9 +23,12 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/pinctrl/consumer.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
#include <mach/digctl.h>
#include <mach/mxs.h>
static struct fb_videomode mx23evk_video_modes[] = {
{
......@@ -99,9 +104,40 @@ static struct fb_videomode apx4devkit_video_modes[] = {
static struct mxsfb_platform_data mxsfb_pdata __initdata;
/*
* MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
*/
#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13)
static int flexcan0_en, flexcan1_en;
static void mx28evk_flexcan_switch(void)
{
if (flexcan0_en || flexcan1_en)
gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
else
gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
}
static void mx28evk_flexcan0_switch(int enable)
{
flexcan0_en = enable;
mx28evk_flexcan_switch();
}
static void mx28evk_flexcan1_switch(int enable)
{
flexcan1_en = enable;
mx28evk_flexcan_switch();
}
static struct flexcan_platform_data flexcan_pdata[2];
static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata),
OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata),
OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]),
OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]),
{ /* sentinel */ }
};
......@@ -237,11 +273,21 @@ static void __init imx28_evk_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
}
static void __init imx28_evk_post_init(void)
{
if (!gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT,
"flexcan-switch")) {
flexcan_pdata[0].transceiver_switch = mx28evk_flexcan0_switch;
flexcan_pdata[1].transceiver_switch = mx28evk_flexcan1_switch;
}
}
static void __init m28evk_init(void)
{
enable_clk_enet_out();
update_fec_mac_prop(OUI_DENX);
mxsfb_pdata.mode_list = m28evk_video_modes;
......@@ -270,6 +316,80 @@ static void __init apx4devkit_init(void)
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
}
#define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0)
#define ENET0_MDIO__GPIO_4_1 MXS_GPIO_NR(4, 1)
#define ENET0_RX_EN__GPIO_4_2 MXS_GPIO_NR(4, 2)
#define ENET0_RXD0__GPIO_4_3 MXS_GPIO_NR(4, 3)
#define ENET0_RXD1__GPIO_4_4 MXS_GPIO_NR(4, 4)
#define ENET0_TX_EN__GPIO_4_6 MXS_GPIO_NR(4, 6)
#define ENET0_TXD0__GPIO_4_7 MXS_GPIO_NR(4, 7)
#define ENET0_TXD1__GPIO_4_8 MXS_GPIO_NR(4, 8)
#define ENET_CLK__GPIO_4_16 MXS_GPIO_NR(4, 16)
#define TX28_FEC_PHY_POWER MXS_GPIO_NR(3, 29)
#define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
#define TX28_FEC_nINT MXS_GPIO_NR(4, 5)
static const struct gpio tx28_gpios[] __initconst = {
{ ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
{ ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
{ ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
{ ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" },
{ ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" },
{ ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" },
{ ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" },
{ ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" },
{ ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" },
{ TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
{ TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" },
{ TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" },
};
static void __init tx28_post_init(void)
{
struct device_node *np;
struct platform_device *pdev;
struct pinctrl *pctl;
int ret;
enable_clk_enet_out();
np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec");
pdev = of_find_device_by_node(np);
if (!pdev) {
pr_err("%s: failed to find fec device\n", __func__);
return;
}
pctl = pinctrl_get_select(&pdev->dev, "gpio_mode");
if (IS_ERR(pctl)) {
pr_err("%s: failed to get pinctrl state\n", __func__);
return;
}
ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios));
if (ret) {
pr_err("%s: failed to request gpios: %d\n", __func__, ret);
return;
}
/* Power up fec phy */
gpio_set_value(TX28_FEC_PHY_POWER, 1);
msleep(26); /* 25ms according to data sheet */
/* Mode strap pins */
gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1);
gpio_set_value(ENET0_RXD0__GPIO_4_3, 1);
gpio_set_value(ENET0_RXD1__GPIO_4_4, 1);
udelay(100); /* minimum assertion time for nRST */
/* Deasserting FEC PHY RESET */
gpio_set_value(TX28_FEC_PHY_RESET, 1);
pinctrl_put(pctl);
}
static void __init mxs_machine_init(void)
{
if (of_machine_is_compatible("fsl,imx28-evk"))
......@@ -283,22 +403,20 @@ static void __init mxs_machine_init(void)
of_platform_populate(NULL, of_default_bus_match_table,
mxs_auxdata_lookup, NULL);
if (of_machine_is_compatible("karo,tx28"))
tx28_post_init();
if (of_machine_is_compatible("fsl,imx28-evk"))
imx28_evk_post_init();
}
static const char *imx23_dt_compat[] __initdata = {
"fsl,imx23-evk",
"fsl,stmp378x_devb"
"olimex,imx23-olinuxino",
"fsl,imx23",
NULL,
};
static const char *imx28_dt_compat[] __initdata = {
"bluegiga,apx4devkit",
"crystalfontz,cfa10036",
"denx,m28evk",
"fsl,imx28-evk",
"karo,tx28",
"fsl,imx28",
NULL,
};
......
/*
* board setup for STMP378x-Development-Board
*
* based on mx23evk board setup and information gained form the original
* plat-stmp based board setup, now converted to mach-mxs.
*
* Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
#include <mach/iomux-mx23.h>
#include "devices-mx23.h"
#define STMP378X_DEVB_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30)
#define STMP378X_DEVB_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29)
#define STMP378X_DEVB_PAD_AUART (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL)
static const iomux_cfg_t stmp378x_dvb_pads[] __initconst = {
/* duart (extended setup missing in old boardcode, too */
MX23_PAD_PWM0__DUART_RX,
MX23_PAD_PWM1__DUART_TX,
/* auart */
MX23_PAD_AUART1_RX__AUART1_RX | STMP378X_DEVB_PAD_AUART,
MX23_PAD_AUART1_TX__AUART1_TX | STMP378X_DEVB_PAD_AUART,
MX23_PAD_AUART1_CTS__AUART1_CTS | STMP378X_DEVB_PAD_AUART,
MX23_PAD_AUART1_RTS__AUART1_RTS | STMP378X_DEVB_PAD_AUART,
/* mmc */
MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_SSP1_CMD__SSP1_CMD |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_SSP1_DETECT__SSP1_DETECT |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
MX23_PAD_SSP1_SCK__SSP1_SCK |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
MX23_PAD_PWM4__GPIO_1_30 | MXS_PAD_CTRL, /* write protect */
MX23_PAD_PWM3__GPIO_1_29 | MXS_PAD_CTRL, /* power enable */
};
static struct mxs_mmc_platform_data stmp378x_dvb_mmc_pdata __initdata = {
.wp_gpio = STMP378X_DEVB_MMC0_WRITE_PROTECT,
};
static struct spi_board_info spi_board_info[] __initdata = {
#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
{
.modalias = "enc28j60",
.max_speed_hz = 6 * 1000 * 1000,
.bus_num = 1,
.chip_select = 0,
.platform_data = NULL,
},
#endif
};
static void __init stmp378x_dvb_init(void)
{
int ret;
mx23_soc_init();
mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads,
ARRAY_SIZE(stmp378x_dvb_pads));
mx23_add_duart();
mx23_add_auart0();
mx23_add_rtc_stmp3xxx();
/* power on mmc slot */
ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER,
GPIOF_OUT_INIT_LOW, "mmc0-slot-power");
if (ret)
pr_warn("could not power mmc (%d)\n", ret);
mx23_add_mxs_mmc(0, &stmp378x_dvb_mmc_pdata);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
}
static void __init stmp378x_dvb_timer_init(void)
{
mx23_clocks_init();
}
static struct sys_timer stmp378x_dvb_timer = {
.init = stmp378x_dvb_timer_init,
};
MACHINE_START(STMP378X, "STMP378X")
.map_io = mx23_map_io,
.init_irq = mx23_init_irq,
.timer = &stmp378x_dvb_timer,
.init_machine = stmp378x_dvb_init,
.restart = mxs_restart,
MACHINE_END
/*
* Copyright (C) 2010 <LW@KARO-electronics.de>
*
* based on: mach-mx28_evk.c
* Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation
*/
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
#include <linux/i2c.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
#include <mach/iomux-mx28.h>
#include "devices-mx28.h"
#include "module-tx28.h"
#define TX28_STK5_GPIO_LED MXS_GPIO_NR(4, 10)
static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
/* LED */
MX28_PAD_ENET0_RXD3__GPIO_4_10 |
MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL,
/* framebuffer */
#define LCD_MODE (MXS_PAD_3V3 | MXS_PAD_4MA)
MX28_PAD_LCD_D00__LCD_D0 | LCD_MODE,
MX28_PAD_LCD_D01__LCD_D1 | LCD_MODE,
MX28_PAD_LCD_D02__LCD_D2 | LCD_MODE,
MX28_PAD_LCD_D03__LCD_D3 | LCD_MODE,
MX28_PAD_LCD_D04__LCD_D4 | LCD_MODE,
MX28_PAD_LCD_D05__LCD_D5 | LCD_MODE,
MX28_PAD_LCD_D06__LCD_D6 | LCD_MODE,
MX28_PAD_LCD_D07__LCD_D7 | LCD_MODE,
MX28_PAD_LCD_D08__LCD_D8 | LCD_MODE,
MX28_PAD_LCD_D09__LCD_D9 | LCD_MODE,
MX28_PAD_LCD_D10__LCD_D10 | LCD_MODE,
MX28_PAD_LCD_D11__LCD_D11 | LCD_MODE,
MX28_PAD_LCD_D12__LCD_D12 | LCD_MODE,
MX28_PAD_LCD_D13__LCD_D13 | LCD_MODE,
MX28_PAD_LCD_D14__LCD_D14 | LCD_MODE,
MX28_PAD_LCD_D15__LCD_D15 | LCD_MODE,
MX28_PAD_LCD_D16__LCD_D16 | LCD_MODE,
MX28_PAD_LCD_D17__LCD_D17 | LCD_MODE,
MX28_PAD_LCD_D18__LCD_D18 | LCD_MODE,
MX28_PAD_LCD_D19__LCD_D19 | LCD_MODE,
MX28_PAD_LCD_D20__LCD_D20 | LCD_MODE,
MX28_PAD_LCD_D21__LCD_D21 | LCD_MODE,
MX28_PAD_LCD_D22__LCD_D22 | LCD_MODE,
MX28_PAD_LCD_D23__LCD_D23 | LCD_MODE,
MX28_PAD_LCD_RD_E__LCD_VSYNC | LCD_MODE,
MX28_PAD_LCD_WR_RWN__LCD_HSYNC | LCD_MODE,
MX28_PAD_LCD_RS__LCD_DOTCLK | LCD_MODE,
MX28_PAD_LCD_CS__LCD_CS | LCD_MODE,
MX28_PAD_LCD_VSYNC__LCD_VSYNC | LCD_MODE,
MX28_PAD_LCD_HSYNC__LCD_HSYNC | LCD_MODE,
MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | LCD_MODE,
MX28_PAD_LCD_ENABLE__GPIO_1_31 | LCD_MODE,
MX28_PAD_LCD_RESET__GPIO_3_30 | LCD_MODE,
MX28_PAD_PWM0__PWM_0 | LCD_MODE,
/* UART1 */
MX28_PAD_AUART0_CTS__DUART_RX,
MX28_PAD_AUART0_RTS__DUART_TX,
MX28_PAD_AUART0_TX__DUART_RTS,
MX28_PAD_AUART0_RX__DUART_CTS,
/* UART2 */
MX28_PAD_AUART1_RX__AUART1_RX,
MX28_PAD_AUART1_TX__AUART1_TX,
MX28_PAD_AUART1_RTS__AUART1_RTS,
MX28_PAD_AUART1_CTS__AUART1_CTS,
/* CAN */
MX28_PAD_GPMI_RDY2__CAN0_TX,
MX28_PAD_GPMI_RDY3__CAN0_RX,
/* I2C */
MX28_PAD_I2C0_SCL__I2C0_SCL,
MX28_PAD_I2C0_SDA__I2C0_SDA,
/* TSC2007 */
MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP,
/* MMC0 */
MX28_PAD_SSP0_DATA0__SSP0_D0 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA1__SSP0_D1 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA2__SSP0_D2 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA3__SSP0_D3 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_CMD__SSP0_CMD |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
MX28_PAD_SSP0_SCK__SSP0_SCK |
(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
};
static const struct gpio_led tx28_stk5v3_leds[] __initconst = {
{
.name = "GPIO-LED",
.default_trigger = "heartbeat",
.gpio = TX28_STK5_GPIO_LED,
},
};
static const struct gpio_led_platform_data tx28_stk5v3_led_data __initconst = {
.leds = tx28_stk5v3_leds,
.num_leds = ARRAY_SIZE(tx28_stk5v3_leds),
};
static struct spi_board_info tx28_spi_board_info[] = {
{
.modalias = "spidev",
.max_speed_hz = 20000000,
.bus_num = 0,
.chip_select = 1,
.controller_data = (void *)SPI_GPIO_NO_CHIPSELECT,
.mode = SPI_MODE_0,
},
};
static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = {
{
I2C_BOARD_INFO("ds1339", 0x68),
},
};
static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = {
.wp_gpio = -EINVAL,
.flags = SLOTF_4_BIT_CAPABLE,
};
static void __init tx28_stk5v3_init(void)
{
mx28_soc_init();
mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
ARRAY_SIZE(tx28_stk5v3_pads));
mx28_add_duart(); /* UART1 */
mx28_add_auart(1); /* UART2 */
tx28_add_fec0();
/* spi via ssp will be added when available */
spi_register_board_info(tx28_spi_board_info,
ARRAY_SIZE(tx28_spi_board_info));
gpio_led_register_device(0, &tx28_stk5v3_led_data);
mx28_add_mxs_i2c(0);
i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
mx28_add_rtc_stmp3xxx();
}
static void __init tx28_timer_init(void)
{
mx28_clocks_init();
}
static struct sys_timer tx28_timer = {
.init = tx28_timer_init,
};
MACHINE_START(TX28, "Ka-Ro electronics TX28 module")
.map_io = mx28_map_io,
.init_irq = mx28_init_irq,
.timer = &tx28_timer,
.init_machine = tx28_stk5v3_init,
.restart = mxs_restart,
MACHINE_END
......@@ -13,14 +13,11 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/pinctrl/machine.h>
#include <asm/mach/map.h>
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <mach/common.h>
#include <mach/iomux.h>
/*
* Define the MX23 memory map.
......@@ -48,43 +45,7 @@ void __init mx23_map_io(void)
iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
}
void __init mx23_init_irq(void)
{
icoll_init_irq();
}
void __init mx28_map_io(void)
{
iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
}
void __init mx28_init_irq(void)
{
icoll_init_irq();
}
void __init mx23_soc_init(void)
{
pinctrl_provide_dummies();
mxs_add_dma("imx23-dma-apbh", MX23_APBH_DMA_BASE_ADDR);
mxs_add_dma("imx23-dma-apbx", MX23_APBX_DMA_BASE_ADDR);
mxs_add_gpio("imx23-gpio", 0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0);
mxs_add_gpio("imx23-gpio", 1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1);
mxs_add_gpio("imx23-gpio", 2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2);
}
void __init mx28_soc_init(void)
{
pinctrl_provide_dummies();
mxs_add_dma("imx28-dma-apbh", MX23_APBH_DMA_BASE_ADDR);
mxs_add_dma("imx28-dma-apbx", MX23_APBX_DMA_BASE_ADDR);
mxs_add_gpio("imx28-gpio", 0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0);
mxs_add_gpio("imx28-gpio", 1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1);
mxs_add_gpio("imx28-gpio", 2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2);
mxs_add_gpio("imx28-gpio", 3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3);
mxs_add_gpio("imx28-gpio", 4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4);
}
/*
* Copyright (C) 2010 <LW@KARO-electronics.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/fec.h>
#include <linux/gpio.h>
#include <mach/iomux-mx28.h>
#include "devices-mx28.h"
#include "module-tx28.h"
#define TX28_FEC_PHY_POWER MXS_GPIO_NR(3, 29)
#define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = {
/* PHY POWER */
MX28_PAD_PWM4__GPIO_3_29 |
MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
/* PHY RESET */
MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
/* Mode strap pins 0-2 */
MX28_PAD_ENET0_RXD0__GPIO_4_3 |
MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
MX28_PAD_ENET0_RXD1__GPIO_4_4 |
MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
MX28_PAD_ENET0_RX_EN__GPIO_4_2 |
MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
/* nINT */
MX28_PAD_ENET0_TX_CLK__GPIO_4_5 |
MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
MX28_PAD_ENET0_MDC__GPIO_4_0,
MX28_PAD_ENET0_MDIO__GPIO_4_1,
MX28_PAD_ENET0_TX_EN__GPIO_4_6,
MX28_PAD_ENET0_TXD0__GPIO_4_7,
MX28_PAD_ENET0_TXD1__GPIO_4_8,
MX28_PAD_ENET_CLK__GPIO_4_16,
};
#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
static const iomux_cfg_t tx28_fec0_pads[] __initconst = {
MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
MX28_PAD_ENET0_RXD0__ENET0_RXD0 | FEC_MODE,
MX28_PAD_ENET0_RXD1__ENET0_RXD1 | FEC_MODE,
MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | FEC_MODE,
MX28_PAD_ENET0_TXD0__ENET0_TXD0 | FEC_MODE,
MX28_PAD_ENET0_TXD1__ENET0_TXD1 | FEC_MODE,
MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
};
static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
MX28_PAD_ENET0_RXD2__ENET1_RXD0,
MX28_PAD_ENET0_RXD3__ENET1_RXD1,
MX28_PAD_ENET0_TXD2__ENET1_TXD0,
MX28_PAD_ENET0_TXD3__ENET1_TXD1,
MX28_PAD_ENET0_COL__ENET1_TX_EN,
MX28_PAD_ENET0_CRS__ENET1_RX_EN,
};
static const struct fec_platform_data tx28_fec0_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
static const struct fec_platform_data tx28_fec1_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
int __init tx28_add_fec0(void)
{
int i, ret;
pr_debug("%s: Switching FEC PHY power off\n", __func__);
ret = mxs_iomux_setup_multiple_pads(tx28_fec_gpio_pads,
ARRAY_SIZE(tx28_fec_gpio_pads));
for (i = 0; i < ARRAY_SIZE(tx28_fec_gpio_pads); i++) {
unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
PAD_PIN(tx28_fec_gpio_pads[i]));
ret = gpio_request(gpio, "FEC");
if (ret) {
pr_err("Failed to request GPIO_%d_%d: %d\n",
PAD_BANK(tx28_fec_gpio_pads[i]),
PAD_PIN(tx28_fec_gpio_pads[i]), ret);
goto free_gpios;
}
ret = gpio_direction_output(gpio, 0);
if (ret) {
pr_err("Failed to set direction of GPIO_%d_%d to output: %d\n",
gpio / 32 + 1, gpio % 32, ret);
goto free_gpios;
}
}
/* Power up fec phy */
pr_debug("%s: Switching FEC PHY power on\n", __func__);
ret = gpio_direction_output(TX28_FEC_PHY_POWER, 1);
if (ret) {
pr_err("Failed to power on PHY: %d\n", ret);
goto free_gpios;
}
mdelay(26); /* 25ms according to data sheet */
/* nINT */
gpio_direction_input(MXS_GPIO_NR(4, 5));
/* Mode strap pins */
gpio_direction_output(MXS_GPIO_NR(4, 2), 1);
gpio_direction_output(MXS_GPIO_NR(4, 3), 1);
gpio_direction_output(MXS_GPIO_NR(4, 4), 1);
udelay(100); /* minimum assertion time for nRST */
pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
gpio_set_value(TX28_FEC_PHY_RESET, 1);
ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads,
ARRAY_SIZE(tx28_fec0_pads));
if (ret) {
pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
__func__, ret);
goto free_gpios;
}
pr_debug("%s: Registering FEC0 device\n", __func__);
mx28_add_fec(0, &tx28_fec0_data);
return 0;
free_gpios:
while (--i >= 0) {
unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
PAD_PIN(tx28_fec_gpio_pads[i]));
gpio_free(gpio);
}
return ret;
}
int __init tx28_add_fec1(void)
{
int ret;
ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads,
ARRAY_SIZE(tx28_fec1_pads));
if (ret) {
pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
__func__, ret);
return ret;
}
pr_debug("%s: Registering FEC1 device\n", __func__);
mx28_add_fec(1, &tx28_fec1_data);
return 0;
}
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
int __init tx28_add_fec0(void);
int __init tx28_add_fec1(void);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment