Commit 83fb2e2e authored by Hans de Goede's avatar Hans de Goede Committed by Mauro Carvalho Chehab

[media] gspca_zc3xx: Fix JPEG quality setting code

The current code is using bits 0-1 of register 8 of the zc3xx controller
to set the JPEG quality, but the correct bits are bits 1-2. Bit 0 selects
between truncation or rounding in the quantization phase of the compression,
since rounding generally gives better results it should thus always be 1.

This patch also corrects the quality percentages which belong to the 4
different settings.

Last this patch removes the different reg 8 defaults depending on the sensor
type. Some of them where going for a default quality setting of 50%, which
generally is not necessary in any way and results in poor image quality.
75% is a good default to use for all scenarios.
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent fba11fed
......@@ -32,7 +32,7 @@ MODULE_LICENSE("GPL");
static int force_sensor = -1;
#define REG08_DEF 3 /* default JPEG compression (70%) */
#define REG08_DEF 3 /* default JPEG compression (75%) */
#include "zc3xx-reg.h"
/* controls */
......@@ -193,10 +193,10 @@ static const struct ctrl sd_ctrls[NCTRLS] = {
.id = V4L2_CID_JPEG_COMPRESSION_QUALITY,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Compression Quality",
.minimum = 40,
.maximum = 70,
.minimum = 50,
.maximum = 94,
.step = 1,
.default_value = 70 /* updated in sd_init() */
.default_value = 75,
},
.set = sd_setquality
},
......@@ -241,8 +241,8 @@ static const struct v4l2_pix_format sif_mode[] = {
.priv = 0},
};
/* bridge reg08 -> JPEG quality conversion table */
static u8 jpeg_qual[] = {40, 50, 60, 70, /*80*/};
/* bridge reg08 bits 1-2 -> JPEG quality conversion table */
static u8 jpeg_qual[] = {50, 75, 87, 94};
/* usb exchanges */
struct usb_action {
......@@ -5923,7 +5923,7 @@ static void setquality(struct gspca_dev *gspca_dev)
struct sd *sd = (struct sd *) gspca_dev;
s8 reg07;
jpeg_set_qual(sd->jpeg_hdr, jpeg_qual[sd->reg08]);
jpeg_set_qual(sd->jpeg_hdr, jpeg_qual[sd->reg08 >> 1]);
reg07 = 0;
switch (sd->sensor) {
......@@ -6079,11 +6079,12 @@ static void transfer_update(struct work_struct *work)
struct sd *sd = container_of(work, struct sd, work);
struct gspca_dev *gspca_dev = &sd->gspca_dev;
int change, good;
u8 reg07, reg11;
u8 reg07, qual, reg11;
/* synchronize with the main driver and initialize the registers */
mutex_lock(&gspca_dev->usb_lock);
reg07 = 0; /* max */
qual = sd->reg08 >> 1;
reg_w(gspca_dev, reg07, 0x0007);
reg_w(gspca_dev, sd->reg08, ZC3XX_R008_CLOCKSETTING);
mutex_unlock(&gspca_dev->usb_lock);
......@@ -6109,9 +6110,9 @@ static void transfer_update(struct work_struct *work)
case 0: /* max */
reg07 = sd->sensor == SENSOR_HV7131R
? 0x30 : 0x32;
if (sd->reg08 != 0) {
if (qual != 0) {
change = 3;
sd->reg08--;
qual--;
}
break;
case 0x32:
......@@ -6144,10 +6145,10 @@ static void transfer_update(struct work_struct *work)
}
}
} else { /* reg07 max */
if (sd->reg08 < sizeof jpeg_qual - 1) {
if (qual < sizeof jpeg_qual - 1) {
good++;
if (good > 10) {
sd->reg08++;
qual++;
change = 2;
}
}
......@@ -6162,15 +6163,16 @@ static void transfer_update(struct work_struct *work)
goto err;
}
if (change & 2) {
sd->reg08 = (qual << 1) | 1;
reg_w(gspca_dev, sd->reg08,
ZC3XX_R008_CLOCKSETTING);
if (gspca_dev->usb_err < 0
|| !gspca_dev->present
|| !gspca_dev->streaming)
goto err;
sd->ctrls[QUALITY].val = jpeg_qual[sd->reg08];
sd->ctrls[QUALITY].val = jpeg_qual[qual];
jpeg_set_qual(sd->jpeg_hdr,
jpeg_qual[sd->reg08]);
jpeg_qual[qual]);
}
}
mutex_unlock(&gspca_dev->usb_lock);
......@@ -6562,27 +6564,6 @@ static int sd_init(struct gspca_dev *gspca_dev)
[SENSOR_PO2030] = 1,
[SENSOR_TAS5130C] = 1,
};
static const u8 reg08_tb[SENSOR_MAX] = {
[SENSOR_ADCM2700] = 1,
[SENSOR_CS2102] = 3,
[SENSOR_CS2102K] = 3,
[SENSOR_GC0303] = 2,
[SENSOR_GC0305] = 3,
[SENSOR_HDCS2020] = 1,
[SENSOR_HV7131B] = 3,
[SENSOR_HV7131R] = 3,
[SENSOR_ICM105A] = 3,
[SENSOR_MC501CB] = 3,
[SENSOR_MT9V111_1] = 3,
[SENSOR_MT9V111_3] = 3,
[SENSOR_OV7620] = 1,
[SENSOR_OV7630C] = 3,
[SENSOR_PAS106] = 3,
[SENSOR_PAS202B] = 3,
[SENSOR_PB0330] = 3,
[SENSOR_PO2030] = 2,
[SENSOR_TAS5130C] = 3,
};
sensor = zcxx_probeSensor(gspca_dev);
if (sensor >= 0)
......@@ -6734,8 +6715,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
}
sd->ctrls[GAMMA].def = gamma[sd->sensor];
sd->reg08 = reg08_tb[sd->sensor];
sd->ctrls[QUALITY].def = jpeg_qual[sd->reg08];
sd->ctrls[QUALITY].def = jpeg_qual[sd->reg08 >> 1];
sd->ctrls[QUALITY].min = jpeg_qual[0];
sd->ctrls[QUALITY].max = jpeg_qual[ARRAY_SIZE(jpeg_qual) - 1];
......@@ -7030,17 +7010,17 @@ static int sd_querymenu(struct gspca_dev *gspca_dev,
static int sd_setquality(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
int i;
int i, qual = sd->reg08 >> 1;
for (i = 0; i < ARRAY_SIZE(jpeg_qual) - 1; i++) {
for (i = 0; i < ARRAY_SIZE(jpeg_qual); i++) {
if (val <= jpeg_qual[i])
break;
}
if (i > 0
&& i == sd->reg08
&& val < jpeg_qual[sd->reg08])
&& i == qual
&& val < jpeg_qual[i])
i--;
sd->reg08 = i;
sd->reg08 = (i << 1) | 1;
sd->ctrls[QUALITY].val = jpeg_qual[i];
if (gspca_dev->streaming)
setquality(gspca_dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment