Commit 8420a241 authored by Jingoo Han's avatar Jingoo Han Committed by Lee Jones

mfd: Replace strict_strtoul() with kstrtoul() in ab* and att*

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: default avatarJingoo Han <jg1.han@samsung.com>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent fccf14ad
......@@ -312,8 +312,9 @@ static ssize_t aat2870_reg_write_file(struct file *file,
while (*start == ' ')
start++;
if (strict_strtoul(start, 16, &val))
return -EINVAL;
ret = kstrtoul(start, 16, &val);
if (ret)
return ret;
ret = aat2870->write(aat2870, (u8)addr, (u8)val);
if (ret)
......
......@@ -491,7 +491,7 @@ static ssize_t ab3100_get_set_reg(struct file *file,
char buf[32];
ssize_t buf_size;
int regp;
unsigned long user_reg;
u8 user_reg;
int err;
int i = 0;
......@@ -514,34 +514,29 @@ static ssize_t ab3100_get_set_reg(struct file *file,
/*
* Advance pointer to end of string then terminate
* the register string. This is needed to satisfy
* the strict_strtoul() function.
* the kstrtou8() function.
*/
while ((i < buf_size) && (buf[i] != ' '))
i++;
buf[i] = '\0';
err = strict_strtoul(&buf[regp], 16, &user_reg);
err = kstrtou8(&buf[regp], 16, &user_reg);
if (err)
return err;
if (user_reg > 0xff)
return -EINVAL;
/* Either we read or we write a register here */
if (!priv->mode) {
/* Reading */
u8 reg = (u8) user_reg;
u8 regvalue;
ab3100_get_register_interruptible(ab3100, reg, &regvalue);
ab3100_get_register_interruptible(ab3100, user_reg, &regvalue);
dev_info(ab3100->dev,
"debug read AB3100 reg[0x%02x]: 0x%02x\n",
reg, regvalue);
user_reg, regvalue);
} else {
int valp;
unsigned long user_value;
u8 reg = (u8) user_reg;
u8 value;
u8 user_value;
u8 regvalue;
/*
......@@ -557,20 +552,17 @@ static ssize_t ab3100_get_set_reg(struct file *file,
i++;
buf[i] = '\0';
err = strict_strtoul(&buf[valp], 16, &user_value);
err = kstrtou8(&buf[valp], 16, &user_value);
if (err)
return err;
if (user_reg > 0xff)
return -EINVAL;
value = (u8) user_value;
ab3100_set_register_interruptible(ab3100, reg, value);
ab3100_get_register_interruptible(ab3100, reg, &regvalue);
ab3100_set_register_interruptible(ab3100, user_reg, user_value);
ab3100_get_register_interruptible(ab3100, user_reg, &regvalue);
dev_info(ab3100->dev,
"debug write reg[0x%02x] with 0x%02x, "
"after readback: 0x%02x\n",
reg, value, regvalue);
user_reg, user_value, regvalue);
}
return buf_size;
}
......
......@@ -2757,7 +2757,7 @@ static ssize_t show_irq(struct device *dev,
unsigned int irq_index;
int err;
err = strict_strtoul(attr->attr.name, 0, &name);
err = kstrtoul(attr->attr.name, 0, &name);
if (err)
return err;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment