[SCSI] qla2xxx: Correctly set FCF_TAPE_PRESENT flag based on scsi-device.

In fabric-login based on iop BIT_8 firmware notifies presence of
a FCP2 device and not necessarily a TAPE device.  So instead of
setting FCF_TAPE_PRESENT flag there we set it using
scsi_device->type after mid-layer scan recognises "type" of the
device.

It also adds a new flag FCF_FCP2_DEVICE for any future use.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

drivers/scsi/qla2xxx/qla_def.h

@@ -1590,6 +1590,7 @@ typedef struct fc_port {
 #define FCF_FABRIC_DEVICE	BIT_0
 #define FCF_LOGIN_NEEDED	BIT_1
 #define FCF_TAPE_PRESENT	BIT_2
+#define FCF_FCP2_DEVICE		BIT_3
 
 /* No loop ID flag. */
 #define FC_NO_LOOP_ID		0x1000

drivers/scsi/qla2xxx/qla_init.c

@@ -3341,7 +3341,7 @@ qla2x00_fabric_login(scsi_qla_host_t *vha, fc_port_t *fcport,
 			} else {
 				fcport->port_type = FCT_TARGET;
 				if (mb[1] & BIT_1) {
-					fcport->flags |= FCF_TAPE_PRESENT;
+					fcport->flags |= FCF_FCP2_DEVICE;
 				}
 			}
 

drivers/scsi/qla2xxx/qla_isr.c

@@ -1013,7 +1013,7 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
 
 		data[0] = MBS_COMMAND_COMPLETE;
 		if (lio->ctx.type == SRB_LOGIN_CMD && le16_to_cpu(mbx->mb1) & BIT_1)
-			fcport->flags |= FCF_TAPE_PRESENT;
+			fcport->flags |= FCF_FCP2_DEVICE;
 
 		goto done_post_logio_done_work;
 	}
@@ -1112,7 +1112,7 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
 		if (iop[0] & BIT_4) {
 			fcport->port_type = FCT_TARGET;
 			if (iop[0] & BIT_8)
-				fcport->flags |= FCF_TAPE_PRESENT;
+				fcport->flags |= FCF_FCP2_DEVICE;
 		}
 		if (iop[0] & BIT_5)
 			fcport->port_type = FCT_INITIATOR;

drivers/scsi/qla2xxx/qla_os.c

@@ -1216,6 +1216,7 @@ qla2xxx_slave_configure(struct scsi_device *sdev)
 	scsi_qla_host_t *vha = shost_priv(sdev->host);
 	struct qla_hw_data *ha = vha->hw;
 	struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
+	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
 	struct req_que *req = vha->req;
 
 	if (sdev->tagged_supported)
@@ -1224,6 +1225,8 @@ qla2xxx_slave_configure(struct scsi_device *sdev)
 		scsi_deactivate_tcq(sdev, req->max_q_depth);
 
 	rport->dev_loss_tmo = ha->port_down_retry_count;
+	if (sdev->type == TYPE_TAPE)
+		fcport->flags |= FCF_TAPE_PRESENT;
 
 	return 0;
 }