Commit 84a867c0 authored by Matti Vaittinen's avatar Matti Vaittinen Committed by Mark Brown

dt-bindings: regulator: Document ROHM BD71282 regulator bindings

Document ROHM BD71828 PMIC regulator device tree bindings.
Signed-off-by: default avatarMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/0985fec1cce98b1db66e5df2d9bcf2dfd9c224a7.1576054779.git.matti.vaittinen@fi.rohmeurope.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 21b2c471
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/regulator/rohm,bd71828-regulator.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ROHM BD71828 Power Management Integrated Circuit regulators
maintainers:
- Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
description: |
This module is part of the ROHM BD71828 MFD device. For more details
see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml.
The regulator controller is represented as a sub-node of the PMIC node
on the device tree.
Regulator nodes should be named to BUCK_<number> and LDO_<number>.
The valid names for BD71828 regulator nodes are
BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7
LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
patternProperties:
"^LDO[1-7]$":
type: object
allOf:
- $ref: regulator.yaml#
description:
Properties for single LDO regulator.
properties:
regulator-name:
pattern: "^ldo[1-7]$"
description:
should be "ldo1", ..., "ldo7"
"^BUCK[1-7]$":
type: object
allOf:
- $ref: regulator.yaml#
description:
Properties for single BUCK regulator.
properties:
regulator-name:
pattern: "^buck[1-7]$"
description:
should be "buck1", ..., "buck7"
rohm,dvs-run-voltage:
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 0
maximum: 3300000
description:
PMIC default "RUN" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
rohm,dvs-idle-voltage:
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 0
maximum: 3300000
description:
PMIC default "IDLE" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
rohm,dvs-suspend-voltage:
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 0
maximum: 3300000
description:
PMIC default "SUSPEND" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
rohm,dvs-lpsr-voltage:
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 0
maximum: 3300000
description:
PMIC default "LPSR" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
# Supported default DVS states:
# buck | run | idle | suspend | lpsr
#--------------------------------------------------------------
# 1, 2, 6, and 7 | supported | supported | supported (*)
#--------------------------------------------------------------
# 3, 4, and 5 | supported (**)
#--------------------------------------------------------------
#
#(*) LPSR and SUSPEND states use same voltage but both states have own
# enable /
# disable settings. Voltage 0 can be specified for a state to make
# regulator disabled on that state.
#
#(**) All states use same voltage but have own enable / disable
# settings. Voltage 0 can be specified for a state to make
# regulator disabled on that state.
required:
- regulator-name
additionalProperties: false
additionalProperties: false
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment