ublk: move ublk_cancel_dev() out of ub->mutex

ublk_cancel_dev() just calls ublk_cancel_queue() to cancel all pending
io commands after ublk request queue is idle. The only protection is just
the read & write of ubq->nr_io_ready and avoid duplicated command cancel,
so add one per-queue lock with cancel flag for providing this protection,
meantime move ublk_cancel_dev() out of ub->mutex.

Then we needn't to call io_uring_cmd_complete_in_task() to cancel
pending command. And the same cancel logic will be re-used for
cancelable uring command.

This patch basically reverts commit ac5902f8 ("ublk: fix AB-BA lockdep warning").
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231009093324.957829-4-ming.lei@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

drivers/block/ublk_drv.c

@@ -115,6 +115,9 @@ struct ublk_uring_cmd_pdu {
  */
 #define UBLK_IO_FLAG_NEED_GET_DATA 0x08
 
+/* atomic RW with ubq->cancel_lock */
+#define UBLK_IO_FLAG_CANCELED	0x80000000
+
 struct ublk_io {
 	/* userspace buffer address from io cmd */
 	__u64	addr;
@@ -139,6 +142,7 @@ struct ublk_queue {
 	bool force_abort;
 	bool timeout;
 	unsigned short nr_io_ready;	/* how many ios setup */
+	spinlock_t		cancel_lock;
 	struct ublk_device *dev;
 	struct ublk_io ios[];
 };
@@ -1474,28 +1478,28 @@ static inline bool ublk_queue_ready(struct ublk_queue *ubq)
 	return ubq->nr_io_ready == ubq->q_depth;
 }
 
-static void ublk_cmd_cancel_cb(struct io_uring_cmd *cmd, unsigned issue_flags)
-{
-	io_uring_cmd_done(cmd, UBLK_IO_RES_ABORT, 0, issue_flags);
-}
-
 static void ublk_cancel_queue(struct ublk_queue *ubq)
 {
 	int i;
 
-	if (!ublk_queue_ready(ubq))
-		return;
-
 	for (i = 0; i < ubq->q_depth; i++) {
 		struct ublk_io *io = &ubq->ios[i];
 
-		if (io->flags & UBLK_IO_FLAG_ACTIVE)
-			io_uring_cmd_complete_in_task(io->cmd,
-						      ublk_cmd_cancel_cb);
-	}
+		if (io->flags & UBLK_IO_FLAG_ACTIVE) {
+			bool done;
 
-	/* all io commands are canceled */
-	ubq->nr_io_ready = 0;
+			spin_lock(&ubq->cancel_lock);
+			done = !!(io->flags & UBLK_IO_FLAG_CANCELED);
+			if (!done)
+				io->flags |= UBLK_IO_FLAG_CANCELED;
+			spin_unlock(&ubq->cancel_lock);
+
+			if (!done)
+				io_uring_cmd_done(io->cmd,
+						UBLK_IO_RES_ABORT, 0,
+						IO_URING_F_UNLOCKED);
+		}
+	}
 }
 
 /* Cancel all pending commands, must be called after del_gendisk() returns */
@@ -1542,7 +1546,6 @@ static void __ublk_quiesce_dev(struct ublk_device *ub)
 	blk_mq_quiesce_queue(ub->ub_disk->queue);
 	ublk_wait_tagset_rqs_idle(ub);
 	ub->dev_info.state = UBLK_S_DEV_QUIESCED;
-	ublk_cancel_dev(ub);
 	/* we are going to release task_struct of ubq_daemon and resets
 	 * ->ubq_daemon to NULL. So in monitor_work, check on ubq_daemon causes UAF.
 	 * Besides, monitor_work is not necessary in QUIESCED state since we have
@@ -1565,6 +1568,7 @@ static void ublk_quiesce_work_fn(struct work_struct *work)
 	__ublk_quiesce_dev(ub);
  unlock:
 	mutex_unlock(&ub->mutex);
+	ublk_cancel_dev(ub);
 }
 
 static void ublk_unquiesce_dev(struct ublk_device *ub)
@@ -1604,8 +1608,8 @@ static void ublk_stop_dev(struct ublk_device *ub)
 	put_disk(ub->ub_disk);
 	ub->ub_disk = NULL;
  unlock:
-	ublk_cancel_dev(ub);
 	mutex_unlock(&ub->mutex);
+	ublk_cancel_dev(ub);
 	cancel_delayed_work_sync(&ub->monitor_work);
 }
 
@@ -1979,6 +1983,7 @@ static int ublk_init_queue(struct ublk_device *ub, int q_id)
 	void *ptr;
 	int size;
 
+	spin_lock_init(&ubq->cancel_lock);
 	ubq->flags = ub->dev_info.flags;
 	ubq->q_id = q_id;
 	ubq->q_depth = ub->dev_info.queue_depth;
@@ -2593,8 +2598,9 @@ static void ublk_queue_reinit(struct ublk_device *ub, struct ublk_queue *ubq)
 	int i;
 
 	WARN_ON_ONCE(!(ubq->ubq_daemon && ubq_daemon_is_dying(ubq)));
+
 	/* All old ioucmds have to be completed */
-	WARN_ON_ONCE(ubq->nr_io_ready);
+	ubq->nr_io_ready = 0;
 	/* old daemon is PF_EXITING, put it now */
 	put_task_struct(ubq->ubq_daemon);
 	/* We have to reset it to NULL, otherwise ub won't accept new FETCH_REQ */