[ARM] Add LCD display parameters for Lubbock board.

arch/arm/mach-pxa/lubbock.c

@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/major.h>
-#include <linux/fs.h>
+#include <linux/fb.h>
 #include <linux/interrupt.h>
 
 #include <asm/setup.h>
@@ -30,6 +30,7 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/udc.h>
+#include <asm/arch/pxafb.h>
 #include <asm/hardware/sa1111.h>
 
 #include "generic.h"
@@ -159,9 +160,29 @@ static struct platform_device *devices[] __initdata = {
 	&smc91x_device,
 };
 
+static struct pxafb_mach_info sharp_lm8v31 __initdata = {
+	.pixclock	= 270000,
+	.xres		= 640,
+	.yres		= 480,
+	.bpp		= 16,
+	.hsync_len	= 1,
+	.left_margin	= 3,
+	.right_margin	= 3,
+	.vsync_len	= 1,
+	.upper_margin	= 0,
+	.lower_margin	= 0,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.cmap_greyscale	= 0,
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+	.lccr0		= LCCR0_SDS,
+	.lccr3		= LCCR3_PCP | LCCR3_Acb(255),
+};
+
 static void __init lubbock_init(void)
 {
 	pxa_set_udc_info(&udc_info);
+	set_pxa_fb_info(&sharp_lm8v31);
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 }