Commit 856ce898 authored by Richard Fitzgerald's avatar Richard Fitzgerald Committed by Mark Brown

ALSA: hda: cs35l56: Initialize all ASP1 registers

Add ASP1_FRAME_CONTROL1, ASP1_FRAME_CONTROL5 and the ASP1_TX?_INPUT
registers to the sequence used to initialize the ASP configuration.
Write this sequence to the cache and directly to the registers to
ensure that they match.

A system-specific firmware can patch these registers to values that are
not the silicon default, so that the CS35L56 boots already in the
configuration used by Windows or by "driverless" Windows setups such
as factory tuning.

These may not match how Linux is configuring the HDA codec. And anyway
on Linux the ALSA controls are used to configure routing options.
Signed-off-by: default avatarRichard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9 ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://msgid.link/r/20240129162737.497-10-rf@opensource.cirrus.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 782e6c53
......@@ -30,14 +30,23 @@
* ASP1_RX_WL = 24 bits per sample
* ASP1_TX_WL = 24 bits per sample
* ASP1_RXn_EN 1..3 and ASP1_TXn_EN 1..4 disabled
*
* Override any Windows-specific mixer settings applied by the firmware.
*/
static const struct reg_sequence cs35l56_hda_dai_config[] = {
{ CS35L56_ASP1_CONTROL1, 0x00000021 },
{ CS35L56_ASP1_CONTROL2, 0x20200200 },
{ CS35L56_ASP1_CONTROL3, 0x00000003 },
{ CS35L56_ASP1_FRAME_CONTROL1, 0x03020100 },
{ CS35L56_ASP1_FRAME_CONTROL5, 0x00020100 },
{ CS35L56_ASP1_DATA_CONTROL5, 0x00000018 },
{ CS35L56_ASP1_DATA_CONTROL1, 0x00000018 },
{ CS35L56_ASP1_ENABLES1, 0x00000000 },
{ CS35L56_ASP1TX1_INPUT, 0x00000018 },
{ CS35L56_ASP1TX2_INPUT, 0x00000019 },
{ CS35L56_ASP1TX3_INPUT, 0x00000020 },
{ CS35L56_ASP1TX4_INPUT, 0x00000028 },
};
static void cs35l56_hda_play(struct cs35l56_hda *cs35l56)
......@@ -133,6 +142,10 @@ static int cs35l56_hda_runtime_resume(struct device *dev)
}
}
ret = cs35l56_force_sync_asp1_registers_from_cache(&cs35l56->base);
if (ret)
goto err;
return 0;
err:
......@@ -976,6 +989,9 @@ int cs35l56_hda_common_probe(struct cs35l56_hda *cs35l56, int id)
regmap_multi_reg_write(cs35l56->base.regmap, cs35l56_hda_dai_config,
ARRAY_SIZE(cs35l56_hda_dai_config));
ret = cs35l56_force_sync_asp1_registers_from_cache(&cs35l56->base);
if (ret)
goto err;
/*
* By default only enable one ASP1TXn, where n=amplifier index,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment